o GCC v4.4.x or higher
o SDL v1.2.14 or higher
o zlib v1.2.5
- o libcdio v0.82 or higher (optional, for Jaguar CD support)
+ o libcdio v0.90 or higher (optional, for Jaguar CD support)
o OpenGL libraries
o Qt 4.7.3 or higher
o supported OS (BeOS, Linux, FreeBSD and WIN32 through mingw, MacOS); other
This software is released under the GPL v3 or later. For more information, read
the GPLv3 file.
+
----------------------------------------------------------------
- IMPORTANT NOTE ABOUT JAGUAR FILE FORMATS--READ THIS OR ELSE! -
----------------------------------------------------------------
file, which is simply a 1, 2, or 4 Meg dump of a Jaguar cartridge ROM which
loads at $800000 in the Jaguar memory space.
+
----------------------------------
- What is Virtual Jaguar GCC/Qt? -
----------------------------------
More information about the incredible SDL libraries can be found at
http://www.libsdl.org. Thanks Sam--you rock! :)
+
-------------------------------
- Using Virtual Jaguar GCC/Qt -
-------------------------------
the command line. See the built in help (under Help|Contents) for more
information on how to use it. :-)
-People on Windows platforms are unable to read the from the command line at
-the moment. So here's what it says:
-
-"Virtual Jaguar GIT 20120914 (2.1.0 Prerelease)
-Based upon Virtual Jaguar core v1.0.0 by David Raingeard.
-Written by James Hammons (Linux/WIN32), Niels Wagenaar (Linux/WIN32),
-Carwin Jones (BeOS), and Adam Green (MacOS)
-Contact: http://sdlemu.ngemu.com/ | sdlemu@ngemu.com
-
-Usage:
- virtualjaguar [<filename>] [switches]
-
- Option Description
- ---------------- -----------------------------------
- <filename> Name of file to autoload
- --alpine -a Put Virtual Jaguar into Alpine mode
- --pal -p PAL mode
- --ntsc -n NTSC mode
- --bios -b Boot using Jagaur BIOS
- --no-bios Do not use Jaguar BIOS
- --gpu -g Enable GPU
- --no-gpu Disable GPU
- --dsp -d Enable DSP
- --no-dsp Disable DSP
- --fullscreen -f Start in full screen mode
- --blur -B Enable GL bilinear filter
- --no-blur Disable GL bilinear filtering
- --log -l Create and use log file
- --no-log Do not use log file
- --help -h Show this message
-
-Invoking Virtual Jagaur with no filename will cause it to boot up
-with the VJ GUI."
-----------
- Finally -
- Blitter needs fixing. [Shamus]
- In emulator screenshots. [Shamus]
- Audio/video dumping. [Shamus]
-- Controller handling. [Shamus]
- Need to emulate bus contention. [Shamus]
- Need to fix timing in the OP. As it is now, it gives a false impression of
how much it's capable of. [Shamus]
Stuff that was added/fixed
--------------------------
+- Controller handling. [Shamus] [DONE--Shamus]
- Full screen option. [Shamus] [DONE--Shamus]
- Command line switches for frontends. [Shamus] [DONE-Shamus]
- Fix DSP code so that it doesn't hang in a spinlock waiting for the sound
Virtual Jaguar v2.1.0 GCC/Qt
----------------------------
+* Added gamepad support. [Shamus]
* Added fullscreen option. [Shamus]
* Added some more developer goodies to Alpine mode. [Shamus]
* Re-added command line switches. [Shamus]
<li>NTSC</li>
<li>PAL</li>
<li>Blur</li>
+<li>Full Screen</li>
</ul>
<p>Here’s what they do.</p>
<p>Normally, the emulated Jaguar’s display shows pixels that are razor sharp and is what you would likely see if the Jaguar was hooked up to a high quality monitor. Selecting this item will cause the emulated Jaguar’s display to be averaged, resulting in a screen that looks slightly blurry—more like what you would expect to see if the Jaguar was hooked up to a television. This is an aesthetic option that some people prefer; you may or may not like it.</p>
+<h3>Full Screen</h3>
+
+<p>Selecting this toolbar button will switch the display into full screen mode; selecting it again will switch it back to windowed mode. This option can also be activated by pressing the <b>F9</b> key on your keyboard. Note that on monitors with a wide aspect ratio that <i>Virtual Jaguar</i> will still display its virtual screen in a 4:3 aspect ratio—this is normal and expected.</p>
+
<h2>Jaguar Menu</h2>
<p><b>Pause</b> does the same as the toolbar button; see the “Pause” toolbar button description for details.</p>
-<p><b>Frame Advance</b> causes <i>Virtual Jaguar</i> to run for one frame (1/60th of a second for NTSC, 1/50th for PAL), and update the screen. This option only works when <i>Virtual Jaguar</i> is paused.</p>
+<p><b>Frame Advance</b> causes <i>Virtual Jaguar</i> to run for one frame (1/60th of a second for NTSC, 1/50th for PAL), and update the screen. This function can also be activated by pressing the <b>F7</b> key on your keyboard. This option only works when <i>Virtual Jaguar</i> is paused.</p>
<p><b>Insert Cartridge...</b> does the same as the toolbar button; see the “Insert Cartridge” toolbar button description for details.</p>
// JLH 01/21/2011 Added SDL initialization
// JLH 06/26/2011 Added fix to keep SDL from hijacking main() on win32
// JLH 05/24/2012 Added option switches
+// JLH 03/05/2013 Fixed console redireciton on win32 platform :-P
//
#include "app.h"
// Apparently on win32, SDL is hijacking main from Qt. So let's do this:
#ifdef __GCCWIN32__
#undef main
+#include <windows.h> // Ick, but needed for console redirection on win32 :-O
#endif
// Function prototypes...
//hm. :-/
// This is stuff we pass into the mainWindow...
+// Also, these are defaults. :-)
bool noUntunedTankPlease = false;
bool loadAndGo = false;
-bool useLogfile = true;
+bool useLogfile = false;
QString filename;
// Here's the main application loop--short and simple...
{
// Win32 console redirection, because MS and their band of super geniuses decided
// that nobody would ever launch an app from the command line. :-P
- // And, of course, this doesn't work, but causes weird problems. Yay Microsoft. :-/
#ifdef __GCCWIN32__
-#if 0
- FILE * ctt = fopen("CON", "w");
- freopen("CON", "w", stdout);
- freopen("CON", "w", stderr);
-#endif
+ BOOL (WINAPI * AttachConsole)(DWORD dwProcessId);
+
+ AttachConsole = (BOOL (WINAPI *)(DWORD))
+ GetProcAddress(LoadLibraryA("kernel32.dll"), "AttachConsole");
+
+ if (AttachConsole != NULL && AttachConsole(((DWORD)-1)))
+ {
+ if (_fileno(stdout) == -1)
+ freopen("CONOUT$","wb",stdout);
+ if (_fileno(stderr) == -1)
+ freopen("CONOUT$","wb",stderr);
+ if (_fileno(stdin) == -1)
+ freopen("CONIN$","rb",stdin);
+
+ // Fix C++
+ std::ios::sync_with_stdio();
+ }
#endif
// Normally, this would be read in from the settings module... :-P
// Check for options that must be in place be constructing the App object
if (!ParseCommandLine(argc, argv))
{
-#ifdef __GCCWIN32__
-#if 0
- fclose(ctt);
-#endif
-#endif
return 0;
}
" --log -l Create and use log file\n"
" --no-log Do not use log file\n"
" --help -h Show this message\n"
+ " --please-dont-kill-my-computer\n"
+ " -z Run Virtual Jaguar without \"snow\"\n"
"\n"
"Invoking Virtual Jagaur with no filename will cause it to boot up\n"
"with the VJ GUI.\n"
projects / virtualjaguar / commitdiff