Update Insert docs for 7.1

diff --git a/include/inserts.html b/include/inserts.html
index 8be124b96e2acee4012c3704efc67bdd4645969c..ed8d20a7464ef3d40563b8d325253feff6cf8333 100644 (file)
--- a/include/inserts.html
+++ b/include/inserts.html
@@ -5,12 +5,22 @@
   feeding the signal from before the insert point to its <dfn>Insert
   send(s)</dfn>, and connecting the remainder of the channel strip to the
   <dfn>Insert return(s)</dfn>, both of which are either audio device or JACK ports.
   feeding the signal from before the insert point to its <dfn>Insert
   send(s)</dfn>, and connecting the remainder of the channel strip to the
   <dfn>Insert return(s)</dfn>, both of which are either audio device or JACK ports.

+</p>
+
+<p class="note">
+  When an insert is created, the signal will be interrupted until the relevant
+  connections to the insert ports are made!
+</p>
+
+<p>

   While jack ports are visible to other JACK applications, ALSA ports are only
   useful for patching in audio equipment external to the computer. If inserting
   a software processor is required, a plugin would be the first choice. If a plugin
   is not available then the jackd audio backend would have to be used. This is
   not very common any more but there are some older jack clients that require
   While jack ports are visible to other JACK applications, ALSA ports are only
   useful for patching in audio equipment external to the computer. If inserting
   a software processor is required, a plugin would be the first choice. If a plugin
   is not available then the jackd audio backend would have to be used. This is
   not very common any more but there are some older jack clients that require

-  using jack.<br>
+  using jack.
+</p>
+<p>

   Inserts work the same as the inserts on analog consoles except they are not
   normalled like most jacks on an analog console.
 </p>
   Inserts work the same as the inserts on analog consoles except they are not
   normalled like most jacks on an analog console.
 </p>


@@ -20,16 +30,29 @@
   analog piece of gear into a channel strip, such as a vintage
   compressor, tube equalizer, etc. In the latter case, the inserts would first
   be connected to a pair of hardware ports, which are in turn connected to the
   analog piece of gear into a channel strip, such as a vintage
   compressor, tube equalizer, etc. In the latter case, the inserts would first
   be connected to a pair of hardware ports, which are in turn connected to the

-  outboard gear.
+  outboard gear. This is done on the <kbd class="tab">Send/Output</kbd> and
+  <kbd class="tab">Return/Input</kbd> tabs of the <kbd class="window">Insert</kbd>
+  dialog respectively.

 </p>
 </p>

+
+<figure>
+  <img src="/images/port-insert-send.png" width="50%" alt="Insert / Send">
+  <figcaption>
+    Insert Dialog, the Send/Output tab
+  </figcaption>
+</figure>
+

 <p>
 <p>

-  Disabling (bypassing) an insert is done by clicking on its LED in the processor box.
-</p>
-<p class="note">
-  When an insert is created, the signal will be interrupted until the relevant
-  connections to the insert ports are made!
+  Apart from providing access to the connections matrix, the dialog allows adjusting
+  the output gain and toggling phase inversion for Send/Output, as well as measuring
+  and adjusting latency for the insert.

 </p>
 </p>

+

 <p class="note">
   Inserts will incur an additional period of latency, which can be
   measured and compensated for during mixing, but not during tracking!
 </p>
 <p class="note">
   Inserts will incur an additional period of latency, which can be
   measured and compensated for during mixing, but not during tracking!
 </p>

+
+<p>
+  Disabling (bypassing) an insert is done by clicking on its LED in the processor box.
+</p>

diff --git a/source/images/port-insert-send.png b/source/images/port-insert-send.png
new file mode 100644 (file)
index 0000000..02df741
Binary files /dev/null and b/source/images/port-insert-send.png differ