---
<p>
- Since version 5.0, Ardour has had full support for the Ableton
- Push2. This is an expensive but well engineered control surface
- primarily targetting the workflow found in Ableton's Live software
- and other similar tools such as Bitwig. As of 5.0, Ardour does not
- offer the same kind of workflow, so we have repurposed the Push 2 to
- be used for mixing and editing, rather than the clip/scene oriented
- approach in Live.
+ Since version 5.4, Ardour has had full support for the Ableton
+ Push2. This is an expensive but beautifully engineered control
+ surface primarily targetting the workflow found in Ableton's Live
+ software and other similar tools such as Bitwig. As of 5.4, Ardour
+ does not offer the same kind of workflow, so we have repurposed the
+ Push 2 to be used for mixing and editing and musical performance,,
+ without the clip/scene oriented approach in Live. This may change in
+ future versions of Ardour.
</p>
<h2>Connecting the Push 2</h2>
future sessions.
</p>
-<h2>Using the Push 2</h2>
+<h2>Basic Concepts</h2>
<p>
- Below we document the functionality accessible from each control on
- the Push 2. The controls can be divided into several sections.
+ With the Push 2 support in Ardour 5.4, you can do the following
+ things:
<dl>
- <dt>Pads</dt>
- <dd></dd>
- <dt>Buttons</dt>
- <dd></dd>
- <dt>Encoders</dt>
- <dd></dd>
- <dt>Touch Strip</dt>
- <dd></dd>
+ <dt>Perform using the 8 x 8 pad "grid"</dt>
+ <dd>The Push 2 has really lovely pressure-sensitive pads that can
+ also generate either aftertouch or note (polyphonic) pressure.</dd>
+ <dt>Global Mixing</dt>
+ <dd>See many tracks at once, and control numerous parameters for each.</dd>
+ <dt>Track/Bus Mixing</dt>
+ <dd>View a single track/bus, with even more parameters for the track.</dd>
+ <dt>Choose the mode/scale, root note and more for the pads</dt>
+ <dd>37 scales are available. Like Live, Ardour offers both
+ "in-key" and "chromatic" pad layouts.</dd>
</dl>
</p>
+
+<h2>Musical Performance</h2>
<p>
- Conceptually, Ardour dividers the controls into a set of 8 strips,
- each consisting of an encoder (at the top), 2 buttons on either side
- of the display, and 8 pads. All the other controls have independent
- functions.
+ Messages sent from the 8x8 pad grid and the "pitch bend bar" are
+ routed to a special MIDI port within Ardour called "Ableton Pads"
+ (no extra latency is incurred from this routing). Although you can
+ manually connect this port to whatever you wish, the normal
+ behaviour of Ardour's Push 2 support is to connect the pads to the
+ most recently selected MIDI track.
+</p>
<p>
- Buttons who function is somewhat related to the label built into the
- device will have the label illuminated.
+ This means that to play a soft-synth/instrument plugin in a given
+ MIDI track with the Push 2, you just need to select that track.
</p>
<p>
- Buttons that Ardour uses for entirely different purposes than the
- builtin label are left unilluminated, but still provide some
- functionality.
+ If multiple MIDI tracks are selected at once, the first selected
+ track will be used. Note that messages originating from all other
+ controls on the Push 2 will <em>not</em> not be delivered to the
+ "Ableton Pads" port. This makes no difference in practice, because
+ the other controls do not send messages that are useful for musical
+ performance.
</p>
+
+<h2>Global Mix</h2>
<p>
- The upper right encoder is used as a gain control (volume) for the
- Master out or Monitor out busses.
+ This is the default mode that Ardour will start the Push 2 in. In
+ this mode, the 8 knobs at the top of the device, the 8 buttons below
+ them, the video display and the 8 buttons below that are combined to
+ provide a global view of the session mix.
+
+ <!-- SCREENSHOT HERE -->
+
</p>
+<p>
+ The upper buttons are labelled by text in the video display just
+ below them. Pressing one of the buttons changes the function of the
+ knobs, and the parameters that will shown for each track/bus in the
+ display. As of Ardour 5.4, the possible parameters are:
+ <dl>
+ <dt>Volumes</dt>
+ <dd>The display shows a knob and text displaying
+ the current gain setting for the track, and a meter that
+ corresponds precisely to the meter shown in the Ardour GUI for
+ that track. Changing the meter type (e.g. from Peak to K12) in the
+ GUI will also change it in the Push 2 display. The physical knob
+ will alter track/bus gain.
+ </dd>
+ <dt>Pans</dt>
+ <dd>The display shows a knob indicating the pan direction/azimuth
+ for the corresponding track/bus. Turning the physical knob will
+ pan the track left and right. If the track/bus has no panner
+ (i.e. it has only a single output), no knob is shown and the
+ physical knob will do nothing. </dd>
+ <dt>Pan Widths</dt>
+ <dd><p>For tracks with 2 outputs, the display will show a knob
+ indicating the pan width setting for the corresponding
+ track/bus. The physical knob can be turned to adjust the
+ width.
+ </p>
+ <p>
+ Unlike many DAWs, Ardour's stereo panners have "width"
+ parameter that defaults to 100%. You cannot change the pan
+ direction/azimuth of a track with 100% width, but must first
+ reduce the width in order to pan it. Similarly, a track panned
+ anywhere other than dead center has limits on the maximum
+ width setting. If these concepts are not familiar to you,
+ please be aware than many DAWs use a "panner" that actually
+ implement "balance" and not "panning", hence the difference.
+ </p>
+ </dd>
+ <dt>A Sends</dt>
+ <dd>The display shows a knob indicating the gain level for the
+ first send in that track. If the track has no send, no knob will
+ be shown, and the physical knob for that track will do nothing.
+ </dd>
+ <dd>B Sends, C Sends, D Sends</dd>
+ <dt>Like "A Sends", but for the 2nd, 3rd and 4th sends of a
+ track/bus respectively.
+ </dt>
+ </dl>
</p>
+
+<h2>Track Mix</h2>
+
+
+<h2>Specific Button/Knob Functions</h2>
+
+<p>
+ In addition to the layouts described above, many (but not all) of
+ the buttons and knobs around the edges of the Push 2 will carry out
+ various functions related to their (illuminated) label. As of Ardour
+ 5.4, this includes:
+ <ul>
+ <li>Metronome (button and adjacent knob)</li>
+ <li>Undo/Redo</li>
+ <li>Duplicate</li>
+ <li>Delete</li>
+ <li>Double Loop</li>
+ <li>Quantize</li>
+ <li>Duplicate</li>
+ <li>Rec-Enable</li>
+ <li>Play</li>
+ <li>Add Track</li>
+ <li>Browse</li>
+ <li>Master</li>
+ <li>Cursor arrows</li>
+ <li>Repeat</li>
+ <li>Scale</li>
+ <li>Layout</li>
+ <li>Octave buttons</li>
+ <li>Page buttons</li>
+ <li>Master knob</li>
+ </ul>
+</p>
+
projects / ardour-manual-diverged / commitdiff