uint32 jaguar_active_memory_dumps = 0;
uint32 jaguarMainROMCRC32, jaguarROMSize, jaguarRunAddress;
-
-bool BIOSLoaded = false;
-bool CDBIOSLoaded = false;
-
-uint32 * backbuffer;
+bool jaguarCartInserted = false;
#ifdef CPU_DEBUG_MEMORY
uint8 writeMemMax[0x400000], writeMemMin[0x400000];
WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
for(int i=0; i<10; i++)
WriteLog("%06X: %08X\n", topOfStack - (i * 4), JaguarReadLong(topOfStack - (i * 4)));
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VIDEO)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
M68K_show_context();
LogDone();
exit(0);
WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
for(int i=0; i<10; i++)
WriteLog("%06X: %08X\n", topOfStack - (i * 4), JaguarReadLong(topOfStack - (i * 4)));
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VIDEO)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
M68K_show_context();
//temp
WriteLog("..................\n");
- if (TOMIRQEnabled(IRQ_VBLANK))
+ if (TOMIRQEnabled(IRQ_VIDEO))
{
WriteLog("video int: enabled\n");
JaguarDasm(JaguarGetHandler(64), 0x200);
JaguarWriteWord(offset+2, data & 0xFFFF, who);
}
+void JaguarSetScreenBuffer(uint32 * buffer)
+{
+ // This is in TOM, but we set it here...
+ screenBuffer = buffer;
+}
+
+void JaguarSetScreenPitch(uint32 pitch)
+{
+ // This is in TOM, but we set it here...
+ screenPitch = pitch;
+}
+
//
// Jaguar console initialization
//
//New timer based code stuffola...
void ScanlineCallback(void);
void RenderCallback(void);
-//extern uint32 * backbuffer;
void JaguarReset(void)
{
//Need to change this so it uses the single RAM space and load the BIOS
//into it somewhere...
//Also, have to change this here and in JaguarReadXX() currently
// Only use the system BIOS if it's available...! (it's always available now!)
- if (vjs.useJaguarBIOS && !vjs.hardwareTypeAlpine)
+ // AND only if a jaguar cartridge has been inserted.
+ if (vjs.useJaguarBIOS && jaguarCartInserted && !vjs.hardwareTypeAlpine)
memcpy(jaguarMainRAM, jagMemSpace + 0xE00000, 8);
else
SET32(jaguarMainRAM, 4, jaguarRunAddress);
// New timer base code stuffola...
InitializeEventList();
- TOMResetBackbuffer(backbuffer);
// SetCallbackTime(ScanlineCallback, 63.5555);
SetCallbackTime(ScanlineCallback, 31.77775);
// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
// WriteLog("Jaguar: CD BIOS version %04X\n", JaguarReadWord(0x3004));
WriteLog("Jaguar: Interrupt enable = $%02X\n", TOMReadByte(0xF000E1, JAGUAR) & 0x1F);
- WriteLog("Jaguar: Video interrupt is %s (line=%u)\n", ((TOMIRQEnabled(IRQ_VBLANK))
+ WriteLog("Jaguar: Video interrupt is %s (line=%u)\n", ((TOMIRQEnabled(IRQ_VIDEO))
&& (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled", TOMReadWord(0xF0004E, JAGUAR));
M68K_show_context();
//#endif
JaguarDasm(0x802000, 6000);
WriteLog("\n");//*/
#endif
+/* WriteLog("\n\nM68000 disassembly at $080000...\n");
+ JaguarDasm(0x080000, 10000);
+ WriteLog("\n");//*/
}
//
uint32 M68KCyclesPerScanline = m68kClockRate / (vp * refreshRate);
uint32 RISCCyclesPerScanline = m68kClockRate / (vp * refreshRate);
- TOMResetBackbuffer(backbuffer);
/*extern int effect_start;
if (effect_start)
WriteLog("JagExe: VP=%u, VI=%u, CPU CPS=%u, GPU CPS=%u\n", vp, vi, M68KCyclesPerScanline, RISCCyclesPerScanline);//*/
{
// Increment the horizontal count (why? RNG? Besides which, this is *NOT* cycle accurate!)
TOMWriteWord(0xF00004, (TOMReadWord(0xF00004, JAGUAR) + 1) & 0x7FF, JAGUAR);
-
TOMWriteWord(0xF00006, i, JAGUAR); // Write the VC
-// if (i == vi) // Time for Vertical Interrupt?
//Not sure if this is correct...
//Seems to be, kinda. According to the JTRM, this should only fire on odd lines in non-interlace mode...
//Which means that it normally wouldn't go when it's zero.
- if (i == vi && i > 0 && TOMIRQEnabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
+ if (i == vi && i > 0 && TOMIRQEnabled(IRQ_VIDEO)) // Time for Vertical Interrupt?
{
// We don't have to worry about autovectors & whatnot because the Jaguar
// tells you through its HW registers who sent the interrupt...
//
// New Jaguar execution stack
+// This executes 1 frame's worth of code.
//
-
-#if 0
-
-void JaguarExecuteNew(void)
-{
- extern bool finished, showGUI;
- extern bool debounceRunKey;
- // Pass a message to the "joystick" code to debounce the ESC key...
- debounceRunKey = true;
- finished = false;
-/* InitializeEventList();
- TOMResetBackbuffer(backbuffer);
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time//*/
-// uint8 * keystate = SDL_GetKeyState(NULL);
-
- do
- {
- double timeToNextEvent = GetTimeToNextEvent();
-//WriteLog("JEN: Time to next event (%u) is %f usec (%u RISC cycles)...\n", nextEvent, timeToNextEvent, USEC_TO_RISC_CYCLES(timeToNextEvent));
-
- m68k_execute(USEC_TO_M68K_CYCLES(timeToNextEvent));
- gpu_exec(USEC_TO_RISC_CYCLES(timeToNextEvent));
-
- if (vjs.DSPEnabled)
- {
- if (vjs.usePipelinedDSP)
- DSPExecP2(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Pipelined DSP execution (3 stage)...
- else
- DSPExec(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Ordinary non-pipelined DSP
- }
-
- HandleNextEvent();
-
-// if (keystate[SDLK_ESCAPE])
-// break;
-
-// SDL_PumpEvents(); // Needed to keep the keystate current...
- }
- while (!finished);
-}
-
-void ScanlineCallback(void)
-{
- uint16 vc = TOMReadWord(0xF00006, JAGUAR);
- uint16 vp = TOMReadWord(0xF0003E, JAGUAR) + 1;
- uint16 vi = TOMReadWord(0xF0004E, JAGUAR);
-// uint16 vbb = TOMReadWord(0xF00040, JAGUAR);
- vc++;
-
- if (vc >= vp)
- vc = 0;
-
-//WriteLog("SLC: Currently on line %u (VP=%u)...\n", vc, vp);
- TOMWriteWord(0xF00006, vc, JAGUAR);
-
-//This is a crappy kludge, but maybe it'll work for now...
-//Maybe it's not so bad, since the IRQ happens on a scanline boundary...
- if (vc == vi && vc > 0 && tom_irq_enabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
- {
- // We don't have to worry about autovectors & whatnot because the Jaguar
- // tells you through its HW registers who sent the interrupt...
- tom_set_pending_video_int();
- m68k_set_irq(2);
- }
-
- TOMExecScanline(vc, true);
-
-//Change this to VBB???
-//Doesn't seem to matter (at least for Flip Out & I-War)
- if (vc == 0)
-// if (vc == vbb)
- {
-joystick_exec();
-
- RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
- }//*/
-
-// if (vc == 0)
-// TOMResetBackbuffer(backbuffer);
-
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-}
-
-#else
-
bool frameDone;
void JaguarExecuteNew(void)
{
-// extern bool finished, showGUI;
-// extern bool debounceRunKey;
- // Pass a message to the "joystick" code to debounce the ESC key...
-// debounceRunKey = true;
-// finished = false;
-/* InitializeEventList();
- TOMResetBackbuffer(backbuffer);
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time//*/
-// uint8 * keystate = SDL_GetKeyState(NULL);
frameDone = false;
do
}
HandleNextEvent();
-
-// if (keystate[SDLK_ESCAPE])
-// break;
-
-// SDL_PumpEvents(); // Needed to keep the keystate current...
}
while (!frameDone);
}
//This is a crappy kludge, but maybe it'll work for now...
//Maybe it's not so bad, since the IRQ happens on a scanline boundary...
- if (vc == vi && vc > 0 && TOMIRQEnabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
+ if (vc == vi && vc > 0 && TOMIRQEnabled(IRQ_VIDEO)) // Time for Vertical Interrupt?
{
// We don't have to worry about autovectors & whatnot because the Jaguar
// tells you through its HW registers who sent the interrupt...
// if (vc == vbb)
{
JoystickExec();
-//We comment this out so that the GUI can manage this instead. Which is how it should be anyway.
-// RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
frameDone = true;
}//*/
-// if (vc == 0)
-// TOMResetBackbuffer(backbuffer);
-
// SetCallbackTime(ScanlineCallback, 63.5555);
SetCallbackTime(ScanlineCallback, 31.77775);
}
-#endif
-
// This isn't currently used, but maybe it should be...
+/*
+Nah, the scanline based code is good enough, and runs in 1 frame. The GUI
+handles all the rest, so this isn't needed. :-P
+*/
void RenderCallback(void)
{
-// RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time
}
projects / virtualjaguar / blobdiff