From a10b4bfe209f3323a5bd5e7bdd9303f3e78bd4da Mon Sep 17 00:00:00 2001 From: Ed Ward Date: Tue, 22 Jun 2021 23:14:55 +0200 Subject: [PATCH] Use the proper html entity for infinity --- include/foldback-strip.html | 4 ++-- include/monitor-section.html | 6 +++--- include/muting-and-soloing.html | 4 ++-- include/osc-control-for-ardour-4.7-and-prior.html | 2 +- include/osc58-controlling-ardour-with-osc.html | 2 +- 5 files changed, 9 insertions(+), 9 deletions(-) diff --git a/include/foldback-strip.html b/include/foldback-strip.html index 8f63678..296e5f8 100644 --- a/include/foldback-strip.html +++ b/include/foldback-strip.html @@ -127,7 +127,7 @@ same as the gain of the track or bus the send comes from for the current Foldback bus
  • Set sends gain to -inf sets the gain on all sends - for the current Foldback bus to -inf (the lowest gain possible)
    • + for the current Foldback bus to &minus∞ (the lowest gain possible)
  • Set sends gain to 0dB sets the gain on all sends for the current Foldback bus to 0dB
    • @@ -149,7 +149,7 @@ on the send to be the same as the gain of the track or bus the send comes from for the current Foldback bus
  • Set send gain to -inf sets the send gain - for the current Foldback bus to -inf (the lowest gain possible)
    • + for the current Foldback bus to &minus∞ (the lowest gain possible)
  • Set send gain to 0dB sets the send gain for the current Foldback bus to 0dB
  • Remove This Send removes the send from the diff --git a/include/monitor-section.html b/include/monitor-section.html index 4348b53..1181018 100644 --- a/include/monitor-section.html +++ b/include/monitor-section.html @@ -92,9 +92,9 @@ The rotary control has a range of 0dB to +10dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience. SiP CutOnly relevant to Solo in Place mode. This sets the level that all muted tracks - or busses will be muted by. By default it is -∞ i.e. the non soloed tracks are totally inaudible. + or busses will be muted by. By default it is −∞ i.e. the non soloed tracks are totally inaudible. The level can be raised to make the other tracks audible, though dimmed. This is also sometimes referred - to Solo in Front. The rotary control has a range of -inf to +0dB and can be set at any point + to Solo in Front. The rotary control has a range of &minus∞ to +0dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience. @@ -133,7 +133,7 @@

    Global Monitor level

    - This control sets the level for Monitor Section output. The rotary control has a range of -∞ + This control sets the level for Monitor Section output. The rotary control has a range of &minus∞ to +6dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience.

    diff --git a/include/muting-and-soloing.html b/include/muting-and-soloing.html index fc93ddd..c2a6721 100644 --- a/include/muting-and-soloing.html +++ b/include/muting-and-soloing.html @@ -99,10 +99,10 @@ When using solo-in-place (SiP), in other words when soloed tracks are being listened to on the master bus, this fader specifies the gain that will be applied to other tracks in order to mute them. Setting this level to - -∞ dB will mean that other tracks will not be heard at all; setting to + &minus∞ dB will mean that other tracks will not be heard at all; setting to some higher value less than 0dB means that other non-soloed tracks will be heard, just reduced in volume compared to the soloed tracks. Using a value - larger than -∞ dB is sometimes called "Solo-In-Front" by other DAWs, because + larger than &minus∞ dB is sometimes called "Solo-In-Front" by other DAWs, because the listener has the sense that soloed material is "in front" of other material. In Ardour, this is not a distinct mode, but instead the mute cut control offers any level of "in-front-ness" that is desired. diff --git a/include/osc-control-for-ardour-4.7-and-prior.html b/include/osc-control-for-ardour-4.7-and-prior.html index 7a60396..cc450c2 100644 --- a/include/osc-control-for-ardour-4.7-and-prior.html +++ b/include/osc-control-for-ardour-4.7-and-prior.html @@ -98,7 +98,7 @@ here"/> /ardour/routes/recenable rid rec_st where rec_st is a bool/int representing the desired rec state of the track /ardour/routes/gainabs rid gain_abs - where gain_abs is a float ranging from 0 to 2 (0 being -infinite, 1 being 0dB and 2 being +6dB). + where gain_abs is a float ranging from 0 to 2 (0 being &minus∞, 1 being 0dB and 2 being +6dB). /ardour/routes/gaindB rid gain_db where gain_db is a float ranging from -400 to 6 representing the desired gain of the track in dB. /ardour/routes/trimabs rid trim_abs diff --git a/include/osc58-controlling-ardour-with-osc.html b/include/osc58-controlling-ardour-with-osc.html index 0e84e09..239e01e 100644 --- a/include/osc58-controlling-ardour-with-osc.html +++ b/include/osc58-controlling-ardour-with-osc.html @@ -201,7 +201,7 @@ here"/> Gainmode is an int: