Converts <img> to <figure> where it makes sense

diff --git a/include/audiomidi-busses-mixer-strips.html b/include/audiomidi-busses-mixer-strips.html
index 48e0f3c5d793dd52c5ee9dc637be12dbebe82f18..1733671c2b71d180e18a7d08e445c662e54898a4 100644 (file)
--- a/include/audiomidi-busses-mixer-strips.html
+++ b/include/audiomidi-busses-mixer-strips.html
@@ -1,6 +1,9 @@
 
 <figure class="right">
-    <img src="/images/bus-mixer-strip.png" alt="A bus mixer strip">
+    <img src="/images/bus-mixer-strip.png" alt="">
+     <figcaption>
+      A bus mixer strip
+    </figcaption>
 </figure>
 
 <p>
@@ -76,7 +79,13 @@
 
 <h3>Connecting a track to a bus via its outputs</h3>
 
-<img class="left" src="/images/connecting_bus_output.png" alt="Connecting a bus through a track's outputs">
+<figure class="left">
+    <img src="/images/connecting_bus_output.png" alt="Connecting a bus through a track's outputs">
+    <figcaption>
+      Connecting a bus through a track's outputs
+    </figcaption>
+</figure>
+
 <p>
        Connecting the output(s) of a track to the input(s) of the bus sends
        <em>all</em> the audio/MIDI to the bus. In the mixer strip, select (at the
@@ -97,7 +106,13 @@
 
 <h3>Connecting a track to a bus via Sends</h3>
 
-<img class="left" src="/images/connecting_bus_send.png" alt="Connecting a bus through a send">
+<figure class="left">
+    <img src="/images/connecting_bus_send.png" alt="Connecting a bus through a send">
+    <figcaption>
+      Connecting a bus through a send
+    </figcaption>
+</figure>
+
 <p>
        This allows not to interrupt the natural flow of the signal, i.e. the track will
   still output to what its connected to (e.g. Master). The signal is "tapped" at

diff --git a/include/audiomidi-mixer-strips.html b/include/audiomidi-mixer-strips.html
index 25ccb2234393586b58de128bc5b119d49a19c23f..35a0a9ae93c787b6ade22b6be1fa954fc3e3c477 100644 (file)
--- a/include/audiomidi-mixer-strips.html
+++ b/include/audiomidi-mixer-strips.html
@@ -1,6 +1,10 @@
 
-<img class="right" src="/images/mixer-1-strip-numbered.png" alt="A mixer strip">
-
+<figure class="right">
+       <img src="/images/mixer-1-strip-numbered.png" alt="A mixer strip">
+       <figcaption>
+      A mixer strip
+       </figcaption>
+</figure>
 <p>
   A <dfn>mixer strip</dfn> in Ardour is a vertical view of the track, from a
   mixing point of view. This view is convenient to deal with I/O, effects,

diff --git a/include/automation-nomenclature.html b/include/automation-nomenclature.html
index 264423a3f1e5a1881c5c17f5d8735bd2a0696d05..6fa06cc7ee967ef931a9bc7dd482ea6f13579ffc 100644 (file)
--- a/include/automation-nomenclature.html
+++ b/include/automation-nomenclature.html
@@ -1,7 +1,8 @@
 
 <figure class=right>
-<img src="/images/automation-fader1.png">
-<figcaption class=center>An example of a fader automation lane (below) with its associated track (above).</figcaption>
+       <img src="/images/automation-fader1.png" alt="An example of a fader automation lane (below) with its associated track (above).">
+       <figcaption class=center>An example of a fader automation lane (below) with its associated track (above).
+       </figcaption>
 </figure>
 
 <p>

diff --git a/include/behringer-devices-in-mackielogic-control-mode.html b/include/behringer-devices-in-mackielogic-control-mode.html
index 80b4669ca12ea8d3bdec6d118286d48c06e1445a..386a66281d1051fa95eca69dcab642407cbbd0ba 100644 (file)
--- a/include/behringer-devices-in-mackielogic-control-mode.html
+++ b/include/behringer-devices-in-mackielogic-control-mode.html
@@ -329,7 +329,13 @@ The surface can be broken into 8 groups of controls:
   "Behringer X-Touch Mini" map included with Ardour. The control layout in Mackie Control
   mode is shown below.
 </p>
-<img alt="X-Touch Mini MC mode layout" src="/images/xtouch-mini-mcp.png">
+
+<figure>
+  <img alt="X-Touch Mini MC mode layout" src="/images/xtouch-mini-mcp.png">
+  <figcaption>
+    X-Touch Mini MC mode layout
+  </figcaption>
+</figure>
 
 <p class=fixme>Missing content</p>
 

diff --git a/include/comparing-aux-sends-and-subgroups.html b/include/comparing-aux-sends-and-subgroups.html
index 8d36478b07f022541d3430700c1fd2f43951e665..7341be3fd68852fba6424713abb6dfdd398f4881 100644 (file)
--- a/include/comparing-aux-sends-and-subgroups.html
+++ b/include/comparing-aux-sends-and-subgroups.html
@@ -9,11 +9,24 @@
   and are typically used to create a separate mix to send to (for example)
   monitors or headphones (for performer monitor mixes):
 </p>
-<img width="300px" src="/images/aux_routing.png" alt="aux signal routing" />
+
+<figure>
+  <img width="300px" src="/images/aux_routing.png" alt="Aux signal routing">
+  <figcaption>
+    Aux signal routing
+  </figcaption>
+</figure>
+
 <p>
   <dfn>Subgroups</dfn> usually remove the original signal routing to the main mix and
   replace it with a new one that delivers the output of the subgroup bus to
   the main mix instead.
 </p>
-<img width="300px" src="/images/subgroup_routes.png" alt="sub group signal routing" />
+
+<figure>
+  <img width="300px" src="/images/subgroup_routes.png" alt="sub group signal routing">
+  <figcaption>
+    Sub group signal routing
+  </figcaption>
+</figure>
 

diff --git a/include/copying-versus-linking.html b/include/copying-versus-linking.html
index cbe8844e239e8acae4168a67fb0116f4dbe75645..b86e77e09d7ae0d9d8a07488f63be42fd1d370b8 100644 (file)
--- a/include/copying-versus-linking.html
+++ b/include/copying-versus-linking.html
@@ -38,11 +38,11 @@
 </p>
 <table>
   <tr>
-    <td><img src="/images/225-ARDOUR_1_2_1.png"></td>
+    <td><kbd class="option">Copy file to session</kbd></td>
     <td>This file will be imported in the audio/MIDI folder of the session.</td>
   </tr>
   <tr>
-    <td><img src="/images/226-ARDOUR_1_2_1.png"></td>
+    <td><kbd class="optoff">Copy file to session</kbd></td>
     <td>This file won't be copied.</td>
   </tr>
 </table>

diff --git a/include/edit-point-control.html b/include/edit-point-control.html
index 7b2bae518223080005dab952e9bca853ef666106..05877bf4d98cbbe8018a953b22b4aab00653eab0 100644 (file)
--- a/include/edit-point-control.html
+++ b/include/edit-point-control.html
@@ -1,6 +1,9 @@
 
 <figure class="left">
   <img src="/images/toolbar-editpoint.png" alt="Editor toolbar's Edit Point">
+  <figcaption>
+               Editor toolbar's Edit Point
+  </figcaption>
 </figure>
 
 <p>

diff --git a/include/fades-tab.html b/include/fades-tab.html
index 789aabef5e76253587e55f5fabe70619953a1c02..cc8ba3f62aeaaee27581054c88ee507f6d5267e7 100644 (file)
--- a/include/fades-tab.html
+++ b/include/fades-tab.html
@@ -1,5 +1,10 @@
 
-<img src="/images/a4_session_properties_fades.png" alt="session properties fades tab"/>
+<figure>
+    <img src="/images/a4_session_properties_fades.png" alt="Session properties fades tab">
+    <figcaption>
+      Session properties fades tab
+    </figcaption>
+</figure>
 
 <p>
   Change how Ardour works with region crossfades.

diff --git a/include/filenames-tab.html b/include/filenames-tab.html
index a3a1907a47774bf6ddcba859efc038ae6a187faa..cb728dea9130dd0f6cf881b3d62bc23847ed03e1 100644 (file)
--- a/include/filenames-tab.html
+++ b/include/filenames-tab.html
@@ -1,5 +1,10 @@
 
-<img src="/images/a4_session_properties_filenames.png" alt="session properties filenames tab"/>
+<figure>
+    <img src="/images/a4_session_properties_filenames.png" alt="Session properties filenames tab">
+    <figcaption>
+      Session properties filenames tab
+    </figcaption>
+</figure>
 
 <p>
   This tab is used to change how Ardour names recorded regions.

diff --git a/include/grid-controls.html b/include/grid-controls.html
index 95a1c9f8eafbcb4361e5f6ec7be004e1c6bb7b58..4d064428c4cb3fc489ae1314e5b7b4543697a977 100644 (file)
--- a/include/grid-controls.html
+++ b/include/grid-controls.html
@@ -1,5 +1,10 @@
 
-<img class="left" src="/images/toolbar-grid.png" alt="Editor toolbar's grid">
+<figure class="left">
+       <img src="/images/toolbar-grid.png" alt="Editor toolbar's grid">
+       <figcaption>
+               Editor toolbar's grid.
+       </figcaption>
+</figure>
 
 <p>
   Ardour's editor utilizes a <dfn>grid</dfn> to assist in the placement of regions

diff --git a/include/import-dialog.html b/include/import-dialog.html
index 888515c15c667b34c208a487f89d546ad2bbb9d7..9ecf155d45346947745e6f478db779e8f753721f 100644 (file)
--- a/include/import-dialog.html
+++ b/include/import-dialog.html
@@ -1,5 +1,10 @@
 
-<img class="right" src="/images/import-window.png" alt="The import window">
+<figure class="right">
+       <img src="/images/import-window.png" alt="The import window">
+       <figcaption>
+               The import window.
+       </figcaption>
+</figure>
 
 <p>
   Many sessions will require the use of <dfn>existing material</dfn>,

diff --git a/include/locations-tab.html b/include/locations-tab.html
index 35f0413b3435ed9e9ade2898c025dca958c2fab9..c324762507088a39df8685c9d191b94bac3e9dcf 100644 (file)
--- a/include/locations-tab.html
+++ b/include/locations-tab.html
@@ -1,5 +1,10 @@
 
-<img src="/images/a4_session_properties_locations.png" alt="session properties locations tab"/>
+<figure>
+  <img src="/images/a4_session_properties_locations.png" alt="Session properties locations tab">
+  <figcaption>
+    Session properties locations tab
+  </figcaption>
+</figure>
 
 <p>
   These options add file locations that will be searched to find the audio and

diff --git a/include/master-bus-strip.html b/include/master-bus-strip.html
index e1876fdcf282c8ef4f428e29174ef205d489813c..5f0e5f2621771a055131a5c81a81686515b3731c 100644 (file)
--- a/include/master-bus-strip.html
+++ b/include/master-bus-strip.html
@@ -1,5 +1,8 @@
 <figure class="right">
   <img src="/images/master-strip.png" alt="The Master strip in the mixer">
+  <figcaption>
+               The Master strip in the mixer
+  </figcaption>
 </figure>
 
 <p>

diff --git a/include/media-tab.html b/include/media-tab.html
index d26943d505a33e1ad50e2aec76be053d4d25ea09..880f4ec06f0e638d44fda3dbd2909fc9f8417ed1 100644 (file)
--- a/include/media-tab.html
+++ b/include/media-tab.html
@@ -1,5 +1,10 @@
 
-<img src="/images/a4_session_properties_media.png" alt="session properties media tab"/>
+<figure class="right">
+  <img src="/images/a4_session_properties_media.png" alt="Session properties media tab">
+  <figcaption>
+               Session properties media tab
+  </figcaption>
+</figure>
 
 <p>
   Change how sound is stored on disk. These options do not change how sound is handled

diff --git a/include/metadata.html b/include/metadata.html
index 5d6fa1f032bdc4fa3129cb9f0c7b79dd0725212a..4823674c45c4eaebdf195c32dc06f180ac61c31c 100644 (file)
--- a/include/metadata.html
+++ b/include/metadata.html
@@ -5,7 +5,12 @@
 
 <h2>Edit Session Metadata Dialog</h2>
 
-<img src="/images/edit-session-metadata.png" />
+<figure>
+  <img src="/images/edit-session-metadata.png" alt="The session metadata editor">
+  <figcaption>
+               The session metadata editor
+  </figcaption>
+</figure>
 
 <p class=fixme>Add content</p>
 

diff --git a/include/meterbridge-tab.html b/include/meterbridge-tab.html
index ef7f339e5eb7b706863aee01644453f1f2e90403..4348ca8bdf5f8def2454924e8a52beafd33d8857 100644 (file)
--- a/include/meterbridge-tab.html
+++ b/include/meterbridge-tab.html
@@ -4,7 +4,12 @@
   This tab changes what additional controls are also displayed.
 </p>
 
-<img src="/images/a4_session_properties_meterbridge.png" alt="session properties meterbridge tab"/>
+<figure>
+  <img src="/images/a4_session_properties_meterbridge.png" alt="Session properties meterbridge tab">
+  <figcaption>
+               Session properties meterbridge tab
+  </figcaption>
+</figure>
 
 <ul>
   <li>
@@ -18,5 +23,9 @@
   </li>
 </ul>
 
-<img src="/images/a4_meterbridge_full.png" alt="image of meterbidge with all options on"/>
-
+<figure>
+  <img src="/images/a4_meterbridge_full.png" alt="Meterbidge with all options on">
+  <figcaption>
+               Meterbidge with all options on
+  </figcaption>
+</figure>

diff --git a/include/monitor-section.html b/include/monitor-section.html
index 00ac9c2ed948be0d244f11c448eeb2e96a7c32ec..7cf3ed276515ac07f30dcf7f1cfda74aa4d96aca 100644 (file)
--- a/include/monitor-section.html
+++ b/include/monitor-section.html
@@ -1,5 +1,10 @@
 
-<img class="right" src="/images/monitoring-strip.png" alt="The Monitoring strip">
+<figure class="right">
+    <img src="/images/monitoring-strip.png" alt="The Monitoring strip">
+    <figcaption>
+      The Monitoring strip
+    </figcaption>
+</figure>
 
 <p>
   The <dfn>Monitor section</dfn> is an optional feature that provides Control Room/Monitor Speaker outputs. It can be activated for the current session in the

diff --git a/include/monitor-signal-flow.html b/include/monitor-signal-flow.html
index 4354c248af072f174336dd7f02cbdff8686b92f3..84b4eef8269c678e1d3cb1968fca3c3442495f7c 100644 (file)
--- a/include/monitor-signal-flow.html
+++ b/include/monitor-signal-flow.html
@@ -2,8 +2,14 @@
 <p>There are three basic ways to approach monitoring: </p>
 
 <h3>External Monitoring</h3>
-<img class="right"
-src="/images/external-monitoring.png" />
+
+<figure class="right">
+    <img src="/images/external-monitoring.png" alt="External monitoring">
+    <figcaption class="center">
+      External monitoring
+    </figcaption>
+</figure>
+
 <p>When using <dfn>external monitoring</dfn>, Ardour plays no role in
   monitoring at all. Perhaps the recording set-up has an external mixer which
   can be used to set up monitor mixes, or perhaps the sound-card being used
@@ -11,19 +17,33 @@ src="/images/external-monitoring.png" />
   latency.  On the other hand it requires external hardware, and the monitoring
   settings are less flexible and not saved with the session.</p>
 
-<h3>JACK-Based Hardware Monitoring</h3>
-<img class="right" src="/images/jack-monitoring.png" />
+<h3 class="clear">JACK-Based Hardware Monitoring</h3>
+
+<figure class="right">
+    <img src="/images/jack-monitoring.png" alt="Hardware Monitoring">
+    <figcaption class="center">
+      Hardware Monitoring
+    </figcaption>
+</figure>
+
 <p>Some sound cards have the ability
   to mix signals from their inputs to their outputs with very low or even zero
   latency, a feature called <dfn>hardware monitoring</dfn>.
-  Furthermore, on some cards this function can be controlled by JACK.  This is a nice arrangement,
+  Furthermore, on some cards this function can be controlled by JACK. This is a nice arrangement,
   if the sound card supports it, as it combines the convenience of having the
   monitoring controlled by Ardour with the low latency operation of doing it
   externally.
 </p>
 
-<h3>Software Monitoring</h3>
-<img class="right" src="/images/ardour-monitoring.png" />
+<h3 class="clear">Software Monitoring</h3>
+
+<figure class="right">
+    <img src="/images/ardour-monitoring.png" alt="Software Monitoring">
+    <figcaption class="center">
+      Software Monitoring
+    </figcaption>
+</figure>
+
 <p>With the <dfn>software monitoring</dfn> approach, all monitoring is
   performed by Ardour&mdash;it makes track inputs available at track
   outputs, governed by various controls. This approach will almost always have

diff --git a/include/nudge-controls.html b/include/nudge-controls.html
index 9720ae8d97b3a43b3470a855d9d1bd8b1047e55c..96e735aa828e0f981d87207056ab9ffa05889e94 100644 (file)
--- a/include/nudge-controls.html
+++ b/include/nudge-controls.html
@@ -1,5 +1,10 @@
 
-<img class="left" src="/images/toolbar-nudge.png" alt="Editor toolbar's Nudge">
+<figure class="left">
+  <img src="/images/toolbar-nudge.png" alt="Editor toolbar's Nudge">
+  <figcaption>
+    Editor toolbar's Nudge
+  </figcaption>
+</figure>
 
 <p>
   The <dfn>nudge controls</dfn> will move the selected region(s) by a fixed amount of time. The left and right buttons move either backward or forward in time, and the small clock to the left of these buttons sets the amount of time to nudge by. As with all other clocks, you can right-click on the clock to choose the time representation you want to use.

diff --git a/include/osc58-using-the-setup-dialog.html b/include/osc58-using-the-setup-dialog.html
index 5c440d290520468dd5fa191e8d2f596312fc0ef2..121a7652f4ad031adf74b20502abbacc09776dbe 100644 (file)
--- a/include/osc58-using-the-setup-dialog.html
+++ b/include/osc58-using-the-setup-dialog.html
@@ -24,10 +24,14 @@
 </p>
 <h2>Dialog settings</h2>
 <h3>OSC setup tab</h3>
-<p>
-<img alt="the OSC configuration dialog"
-     src="/images/osc-dialog.png">
-</p>
+
+<figure>
+       <img alt="The OSC configuration dialog" src="/images/osc-dialog.png">
+       <figcaption>
+               The OSC configuration dialog
+       </figcaption>
+</figure>
+
 <h4>Connection:</h4>
 <p>
   This field is informational only. It shows where Ardour will receive
@@ -37,10 +41,14 @@
   port up and will keep trying up to 10 ports up.
 </p>
 <h4>Port Mode:</h4>
-<p>
-<img alt="Port Mode Dropdown"
-     src="/images/osc-portmode.png">
-</p>
+
+<figure>
+       <img alt="Port Mode Dropdown" src="/images/osc-portmode.png">
+       <figcaption>
+               Port Mode Dropdown
+       </figcaption>
+</figure>
+
 <p>
   This drop down allows the choice of Auto or Manual outbound port
   setting. The Auto port mode, will send OSC messages back to
@@ -82,10 +90,14 @@
        controllable.
 </p>
 <h4>Gain Mode:</h4>
-<p>
-<img alt="Gain Mode Dropdown"
-     src="/images/osc-gainmode.png">
-</p>
+
+<figure>
+       <img alt="Gain Mode Dropdown" src="/images/osc-gainmode.png">
+       <figcaption>
+               Gain Mode Dropdown
+       </figcaption>
+</figure>
+
 <p>
   Sets the faders (and sends faders) feedback math to position where a
   value between 0 and 1 represents the fader position of the same fader
@@ -95,19 +107,27 @@
   fader is being adjusted and then return the name text.
 </p>
 <h4>Debug:</h4>
-<p>
-<img alt="Debug Mode Dropdown"
-     src="/images/osc-debug.png">
-</p>
+
+<figure>
+       <img alt="Debug Mode Dropdown" src="/images/osc-debug.png">
+       <figcaption>
+               Debug Mode Dropdown
+       </figcaption>
+</figure>
+
 <p>
   For debugging purposes this allows logging either all OSC messages
   Ardour receives or invalid messages received or none.
 </p>
 <h4>Preset:</h4>
-<p>
-<img alt="Preset Loader"
-     src="/images/osc-preset.png">
-</p>
+
+<figure>
+       <img alt="Preset Loader" src="/images/osc-preset.png">
+       <figcaption>
+               Preset Loader
+       </figcaption>
+</figure>
+
 <p>
   Ardour now allows the use of preset settings. The default settings
   used are the settings from the last session or the factory defaults
@@ -134,10 +154,14 @@
   so having correct defaults allows one "Connect" button rather than 4.
 </p>
 <h3>Default Strip Types tab</h3>
-<p>
-<img alt="the Default Strip Types tab"
-     src="/images/osc-strip-types.png">
-</p>
+
+<figure>
+       <img alt="The Default Strip Types tab" src="/images/osc-strip-types.png">
+       <figcaption>
+               The Default Strip Types tab
+       </figcaption>
+</figure>
+
 <p>
   This allows selecting which of Ardour's mixer strips will be available
   for control. The Factory default is all strips except master, monitor
@@ -150,10 +174,14 @@
   controlled by a VCA are hidden, but one of those tracks needs a tweak.
 </p>
 <h3>Default Feedback tab</h3>
-<p>
-<img alt="the Default Feedback tab"
-     src="/images/osc-feedbackdefault.png">
-</p>
+
+<figure>
+       <img alt="The Default Feedback tab" src="/images/osc-feedbackdefault.png">
+       <figcaption>
+               The Default Feedback tab
+       </figcaption>
+</figure>
+
 <p>
   This allows setting up which controls provide feedback. The Factory
   default is none. If the controller is unable to receive feedback, this

diff --git a/include/other-toolbar-items.html b/include/other-toolbar-items.html
index 66cef71712c5ba29eb8619d2ee008992fc412138..e0199951a660f3fcf3c6d26f03a2c492173eb7c2 100644 (file)
--- a/include/other-toolbar-items.html
+++ b/include/other-toolbar-items.html
@@ -1,6 +1,11 @@
 <h2 id="monitor-options">The Monitor Options</h2>
 
-<img src="/images/input-mode-buttons.png" alt="The Monitor options">
+<figure>
+       <img alt="The Monitor options" src="/images/input-mode-buttons.png">
+       <figcaption>
+               The Monitor options
+       </figcaption>
+</figure>
 
 <p>
   These buttons allow switching the monitoring mode globally, for all the tracks at once.
@@ -23,7 +28,12 @@
 
 <h2 id="playhead_options">The Playhead Options</h2>
 
-<img src="/images/playhead-options.png" alt="The playhead options">
+<figure>
+       <img alt="The playhead options" src="/images/playhead-options.png">
+       <figcaption>
+               The playhead options
+       </figcaption>
+</figure>
 
 <p>
   Those 2 buttons control the behaviour of the playhead:
@@ -35,7 +45,12 @@
 
 <h2 id="status_indicators">The Status indicators</h2>
 
-<img src="/images/status_buttons.png" alt="The Status buttons">
+<figure>
+       <img alt="The Status buttons" src="/images/status_buttons.png">
+       <figcaption>
+               The Status buttons
+       </figcaption>
+</figure>
 
 <p>
   The <dfn>Status</dfn> buttons show the current session state:
@@ -49,7 +64,12 @@
 
 <h2 id="mode_selector">The Mode Selector</h2>
 
-<img src="/images/mode-selector_scripts_meter.png" alt="The Status buttons">
+<figure>
+       <img alt="The Mode Selector" src="/images/mode-selector_scripts_meter.png">
+       <figcaption>
+               The Mode Selector
+       </figcaption>
+</figure>
 
 <p>
   The Mode Selector allows switching between the Editor and Mixer windows.

diff --git a/include/processor-box.html b/include/processor-box.html
index 7c931fad873a7cca397c9d4931c8d9407b5e17a6..11e30c9513d81d234b6e098c8604bc73c01b7cec 100644 (file)
--- a/include/processor-box.html
+++ b/include/processor-box.html
@@ -1,7 +1,9 @@
 
-<figure class=right>
-<img src="/images/processor-box.png" alt="the Processor Box" />
-<figcaption class=center>Processor Box.</figcaption>
+<figure class="right">
+       <img src="/images/processor-box.png" alt="the Processor Box">
+       <figcaption class="center">
+               Processor Box.
+       </figcaption>
 </figure>
 
 <p>

diff --git a/include/pushpull-trimming.html b/include/pushpull-trimming.html
index d4e3fafd40c980a0e7002af0cc14768eca7d2bb5..b18a7e5778bdc97bf9e92f456b6ebdb3c4884eb9 100644 (file)
--- a/include/pushpull-trimming.html
+++ b/include/pushpull-trimming.html
@@ -15,9 +15,9 @@
 </p>
 
 <figure>
-  <img src="/images/before-trim.png" alt="region arrangement before trim" />
-  <img src="/images/after-trim.png" alt="region arrangement after a trim" />
-  <img src="/images/after-push-trim.png" alt="region arrangement after a push trim" />
+  <img src="/images/before-trim.png" alt="region arrangement before trim">
+  <img src="/images/after-trim.png" alt="region arrangement after a trim">
+  <img src="/images/after-push-trim.png" alt="region arrangement after a push trim">
   <figcaption>
     Trimming vs. push/pull trimming. Before trimming, After a simple trim, After a push/pull trim
   </figcaption>

diff --git a/include/selection-and-punch-clocks.html b/include/selection-and-punch-clocks.html
index e811019532412c477c1d72475e389e4f5a8232f4..b7a9cc00a279ca33c47ca588e3373ec22dea0310 100644 (file)
--- a/include/selection-and-punch-clocks.html
+++ b/include/selection-and-punch-clocks.html
@@ -1,6 +1,11 @@
 <h2 id="selection_clocks">The Selection Clocks</h2>
 
-<img src="/images/selection-clocks.png" alt="The range clocks">
+<figure>
+    <img src="/images/selection-clocks.png" alt="The range clocks">
+    <figcaption>
+      The range clocks
+    </figcaption>
+</figure>
 
 <p>
   The current <dfn>selection range</dfn>, as set with the <a href="@@toolbox">Range Mode tool</a>,

diff --git a/include/session-misc-tab.html b/include/session-misc-tab.html
index 22b3e17478be2bdf835b6929f9441bb127710793..6b0af80c6f4e20929d670ee2565d9c109153dbaf 100644 (file)
--- a/include/session-misc-tab.html
+++ b/include/session-misc-tab.html
@@ -3,7 +3,12 @@
   This tab has several things that don't fit on the other tabs.
 </p>
 
-<img src="/images/a4_session_properties_misc.png" alt="session properties misc tab"/>
+<figure>
+    <img src="/images/a4_session_properties_misc.png" alt="Session properties misc tab">
+    <figcaption>
+      Session properties misc tab
+    </figcaption>
+</figure>
 
 <ul>
   <li>

diff --git a/include/status-bar.html b/include/status-bar.html
index de5a60052c6013e8c2fecd04e3db866fa8c0c7c7..4079eaa1592ac9e65e3a8dfd56d257e0e49112db 100644 (file)
--- a/include/status-bar.html
+++ b/include/status-bar.html
@@ -1,5 +1,10 @@
 
-<img src="/images/status-bar.png" alt="The Status Bar">
+<figure>
+  <img src="/images/status-bar.png" alt="The Status Bar">
+  <figcaption>
+    The Status Bar
+  </figcaption>
+</figure>
 
 <p>The status bar is an informative bar at the top of the window, showing:</p>
 

diff --git a/include/summary.html b/include/summary.html
index 4d626cdf7fee8ff686d6944ebab68f5c911c548f..3c9134aa2dc16a2c31c15d28f4d206b5ff8ef301 100644 (file)
--- a/include/summary.html
+++ b/include/summary.html
@@ -1,5 +1,10 @@
 
-<img src="/images/summary.png" alt="Ardour's Summary">
+<figure>
+  <img src="/images/summary.png" alt="Ardour's Summary">
+  <figcaption>
+    Ardour's Summary
+  </figcaption>
+</figure>
 
 <p>
   The <dfn>Summary</dfn> is a global overview of the session, allowing for a good "bird's eye" view of where in time and tracks the work happens.

diff --git a/include/sync-tab.html b/include/sync-tab.html
index a3610604ff411fb96ea218e93591c09f5b8d009f..686fa8017ee84f4f0daafdb856bedb33675860fe 100644 (file)
--- a/include/sync-tab.html
+++ b/include/sync-tab.html
@@ -1,5 +1,10 @@
 
-<img src="/images/a4_session_properties_sync.png" alt="session properties sync tab"/>
+<figure>
+  <img src="/images/a4_session_properties_sync.png" alt="Session properties sync tab">
+  <figcaption>
+    Session properties sync tab
+  </figcaption>
+</figure>
 
 <p>
   This tab is used to modify the timecode settings when working with video to

diff --git a/include/timecode-generators-and-slaves.html b/include/timecode-generators-and-slaves.html
index 1efff007644b52efe3a0ee0383b1b27a8806163e..955f26ffe3145348a36f1c240a63087bc0e3eb29 100644 (file)
--- a/include/timecode-generators-and-slaves.html
+++ b/include/timecode-generators-and-slaves.html
@@ -230,7 +230,7 @@
 </p>
 
 <figure class="center">
-  <img src="/images/ltc-transport-alignment.png" alt="LTC frame alignment"/>
+  <img src="/images/ltc-transport-alignment.png" alt="LTC frame alignment">
   <figcaption>
     LTC frame alignment for the 525/60 TV standard
   </figcaption>

diff --git a/include/timecode-tab.html b/include/timecode-tab.html
index 99c899df1061001a2dfa3b50357acb54181edde4..133d063215f9c8b766ae9dd618801fe123537584 100644 (file)
--- a/include/timecode-tab.html
+++ b/include/timecode-tab.html
@@ -1,5 +1,10 @@
 
-<img src="/images/a4_session_properties_timecode.png" alt="session properties timecode tab"/>
+<figure>
+  <img src="/images/a4_session_properties_timecode.png" alt="Session properties timecode tab">
+  <figcaption>
+    Session properties timecode tab
+  </figcaption>
+</figure>
 
 <p>
   This tab is used to change how Ardour interprets and manipulates timecode.

diff --git a/include/toolbox.html b/include/toolbox.html
index 3bfa4e5899400d8120a850a69a2a3d34c2fb3127..60a561fc565b738831177efd56976c936e0eae02 100644 (file)
--- a/include/toolbox.html
+++ b/include/toolbox.html
@@ -1,5 +1,10 @@
 
-<img src="/images/toolbar-tools.png" alt="Editor toolbar's tools, aka toolbox">
+<figure>
+  <img src="/images/toolbar-tools.png" alt="Editor toolbar's tools, aka toolbox">
+  <figcaption>
+    Editor toolbar's tools, aka toolbox
+  </figcaption>
+</figure>
 
 <h2>Global Edit mode</h2>
 

diff --git a/include/track-types.html b/include/track-types.html
index eb2a0edb63c8d6992a133edba85416458aed91c5..1a3894ce2408048bdce175482cbaa9120e96f52f 100644 (file)
--- a/include/track-types.html
+++ b/include/track-types.html
@@ -75,8 +75,14 @@
   suggested for normal
   use.</td></tr>
 </table>
-<img class="right" src="/images/a3_nonlayered_example.png" alt="normal and non-layered overdubbing comparision"
-/>
+
+<figure class="right">
+  <img src="/images/a3_nonlayered_example.png" alt="Normal and non-layered overdubbing comparision">
+  <figcaption>
+    Normal and non-layered overdubbing comparision
+  </figcaption>
+</figure>
+
 <p>
   The screenshot on the right shows the subtle difference between an overdub
   in <dfn>normal mode</dfn> (upper track) and one in <dfn>non-layered mode</dfn>

diff --git a/include/transport-bar.html b/include/transport-bar.html
index 65c14f852e76b6a95a63eeb28b2484129b57d68c..444d189399b4a1e2a1d532e350349510e26083fa 100644 (file)
--- a/include/transport-bar.html
+++ b/include/transport-bar.html
@@ -5,7 +5,12 @@
   playback and recording.
 </p>
 
-<img src="/images/transport.png" alt="The transport controls">
+<figure>
+  <img src="/images/transport.png" alt="The transport controls">
+  <figcaption>
+    The transport controls
+  </figcaption>
+</figure>
 
 <p>
   This bar is made of (from left to right):

diff --git a/include/transport-clocks.html b/include/transport-clocks.html
index 35b8717729f2c02679e55b8f6cfc2ea1e4cd7a88..57f607c825c29cefa0353a1ce5bd807a026bd116 100644 (file)
--- a/include/transport-clocks.html
+++ b/include/transport-clocks.html
@@ -1,5 +1,10 @@
 
-<img src="/images/new_main_clocks.png" alt="An image of the transport clocks in Ardour" />
+<figure>
+  <img src="/images/new_main_clocks.png" alt="The transport clocks in Ardour">
+  <figcaption>
+    The transport clocks in Ardour
+  </figcaption>
+</figure>
 
 <p>
   <dfn>Clocks</dfn> in Ardour are used to display <dfn>time values</dfn> precisely.
@@ -77,6 +82,11 @@
   the same clock during active recording.
 </p>
 
-<a href="/images/bigclock.png"><img src="/images/bigclock.png" height="100" alt="an image of the big clock filling a screen"></a>
-<a href="/images/bigclock-recording.png"><img src="/images/bigclock-recording.png" height="100" alt="an image of the big clock while recording"></a>
+<figure>
+  <a href="/images/bigclock.png"><img src="/images/bigclock.png" height="100" alt="The big clock filling a screen"></a>
+  <a href="/images/bigclock-recording.png"><img src="/images/bigclock-recording.png" height="100" alt="The big clock while recording"></a>
+  <figcaption>
+    The Big Clock, with no transport rolling (left) and recording (right).
+  </figcaption>
+</figure>
 

diff --git a/include/using-more-than-one-audio-device.html b/include/using-more-than-one-audio-device.html
index 9ac57e73dfe5e4fdeda616290a19dee032cd7f77..5c0d17e608bbaa1196a8d926654088d43e6da1e8 100644 (file)
--- a/include/using-more-than-one-audio-device.html
+++ b/include/using-more-than-one-audio-device.html
@@ -25,7 +25,10 @@
 </p>
 
 <p>
-  Thus, in an ideal world, a single device with a single clock and all the inputs, outputs and other features needed should be used. Of course, there are those who like to point out that this is not an ideal world, and believe that software should make up for this.
+  Thus, in an ideal world, a single device with a single clock and all the inputs,
+  outputs and other features needed should be used. Of course, there are those
+  who like to point out that this is not an ideal world, and believe that software
+  should make up for this.
 </p>
 
 <h2>OS X</h2>

diff --git a/include/using-the-ableton-push-2.html b/include/using-the-ableton-push-2.html
index 903ac229d7c35a55ddd47bc26e6bda554ff5dd78..88f417c401c7508b469248ce0ca83e7087190aaa 100644 (file)
--- a/include/using-the-ableton-push-2.html
+++ b/include/using-the-ableton-push-2.html
@@ -1,7 +1,11 @@
 
-<p>
-  <img alt="the Ableton Push 2 surface" src="/images/push2-main.jpg">
-</p>
+<figure>
+  <img src="/images/push2-main.jpg" alt="The Ableton Push 2 surface">
+  <figcaption>
+    The Ableton Push 2 surface
+  </figcaption>
+</figure>
+
 <p>
   Since version 5.4, Ardour has had extensive support for the Ableton
   Push2. This is an expensive but beautifully engineered control
@@ -44,11 +48,15 @@
   aftertouch or polyphonic pressure messages. You can alter this
   setting via the Push 2 GUI, accessed by double-clicking on the "Push
   2" entry in the control surfaces list.
-<p>
-<img alt="the Push 2 configuration dialog"
-     src="/images/push2-gui.png">
 </p>
 
+<figure>
+  <img src="/images/push2-gui.png" alt="The Push 2 configuration dialog">
+  <figcaption>
+    The Push 2 configuration dialog
+  </figcaption>
+</figure>
+
 <h2>Basic Concepts</h2>
 <p>
   With the Push 2 support in Ardour 5.4, you can do the following
@@ -99,10 +107,14 @@
   them, the video display and the 8 buttons below that are combined to
   provide a global view of the session mix.
 </p>
-<p>
-  <img alt="global mix mode on Push2 screen"
-       src="/images/push2-globalmix.png">
-</p>
+
+<figure>
+  <img src="/images/push2-globalmix.png" alt="Global mix mode on Push2 screen">
+  <figcaption>
+    Global mix mode on Push2 screen
+  </figcaption>
+</figure>
+
 <p>
   The upper buttons are labelled by text in the video display just
   below them. Pressing one of the buttons changes the function of the
@@ -231,10 +243,14 @@
   Press the Scale button to enter Scale mode. The display will look
   like this:
 </p>
-<p>
-  <img alt="track mix mode on Push2 screen"
-       src="/images/push2-scale.png">
-</p>
+
+<figure>
+  <img src="/images/push2-scale.png" alt="Track mix mode on Push2 screen">
+  <figcaption>
+    Track mix mode on Push2 screen
+  </figcaption>
+</figure>
+
 <p>
   In the center, 37 scales are presented. Scroll through them by
   either using the cursor/arrow keys to the lower right of the

diff --git a/include/using-the-presonus-faderport.html b/include/using-the-presonus-faderport.html
index 7d8bbfeb2dc2b7236273b70626d34790cc9fa0fb..53d405d3d35508c9fb7ea0376e54286040bfd4ed 100644 (file)
--- a/include/using-the-presonus-faderport.html
+++ b/include/using-the-presonus-faderport.html
@@ -39,9 +39,14 @@
   ports where your Faderport is connected.
 </p>
 <p>
-<img alt="the Faderport configuration dialog"
-     src="/images/faderport_dialog.png">
-</p>
+
+<figure>
+  <img src="/images/faderport_dialog.png" alt="The Faderport configuration dialog">
+  <figcaption>
+    The Faderport configuration dialog
+  </figcaption>
+</figure>
+
 <p>
   Once you select the input and output port, Ardour will initialize
   the Faderport and it will be ready to use. You only need do this

diff --git a/include/using-the-presonus-faderport8.html b/include/using-the-presonus-faderport8.html
index 286f899458b057eabda339c82a90785ed11533d1..a4ea5ed9172b2c1d65e9f395d84fd61a3d3f5cbc 100644 (file)
--- a/include/using-the-presonus-faderport8.html
+++ b/include/using-the-presonus-faderport8.html
@@ -49,8 +49,10 @@
   future sessions.
 <p>
 <figure class="center">
-  <img alt="FaderPort8 Control Surface Settings Dialog"
-       src="/images/fp8_settings.png"/>
+  <img alt="FaderPort8 Control Surface Settings Dialog" src="/images/fp8_settings.png">
+  <figcaption>
+               FaderPort8 Control Surface Settings Dialog
+  </figcaption>
 </figure>
 
 <h2>Using the FaderPort 8</h2>
@@ -78,8 +80,10 @@
 
 <h3>Transport Buttons</h3>
 <figure class="left">
-  <img alt="FaderPort8 Transport Buttons"
-       src="/images/fp8_transport.png"/>
+  <img alt="FaderPort8 Transport Buttons" src="/images/fp8_transport.png">
+  <figcaption>
+               FaderPort8 Transport Buttons
+  </figcaption>
 </figure>
 <ol class="inside">
   <li><kbd class="def">Stop</kbd>: Stops the transport. Press twice to return to
@@ -108,8 +112,10 @@
   With exception of <kbd>Click</kbd> the seven modes are exclusive (radio buttons).
 </p>
 <figure class="left">
-  <img alt="FaderPort8 Navigation Buttons"
-       src="/images/fp8_navigation.png"/>
+  <img alt="FaderPort8 Navigation Buttons" src="/images/fp8_navigation.png">
+  <figcaption>
+               FaderPort8 Navigation Buttons
+  </figcaption>
 </figure>
 <ol class="inside">
   <li><kbd class="def">Channel</kbd>: The <kbd>Prev</kbd> / <kbd>Next</kbd>
@@ -171,8 +177,10 @@
 
 <h3>Shift Button</h3>
 <figure class="left">
-  <img alt="the FaderPort8 Shift Button"
-       src="/images/fp8_shift_large.png"/>
+  <img alt="The FaderPort8 Shift Button" src="/images/fp8_shift_large.png">
+  <figcaption>
+               The FaderPort8 Shift Button
+  </figcaption>
 </figure>
 <p>
   The two <kbd>Shift</kbd> buttons are identical, they're copied to provide
@@ -197,8 +205,10 @@
   (Note: with the 1.01 firmware these buttons always act on press.)
 </p>
 <figure class="left">
-  <img alt="FaderPort8 Fader Mode Buttons"
-       src="/images/fp8_fadermode.png"/>
+  <img alt="FaderPort8 Fader Mode Buttons" src="/images/fp8_fadermode.png">
+  <figcaption>
+               FaderPort8 Fader Mode Buttons
+  </figcaption>
 </figure>
 <ol class="inside">
   <li><kbd class="def">Track</kbd>: In Track-mode, the motorized faders display
@@ -258,8 +268,10 @@
 
 <h3>Channel Strip</h3>
 <figure class="left">
-  <img alt="The FaderPort8 Channel Strip"
-       src="/images/fp8_strip.png"/>
+  <img alt="The FaderPort8 Channel Strip" src="/images/fp8_strip.png">
+  <figcaption>
+               The FaderPort8 Channel Strip
+  </figcaption>
 </figure>
 <ul class="inside">
   <li><strong>Touch-Sensitive Fader</strong>: The fader can be used to control
@@ -324,8 +336,10 @@
   channel-strips.
 </p>
 <figure class="left">
-  <img alt="FaderPort8 Mix Management Buttons"
-       src="/images/fp8_mixmanage.png"/>
+  <img alt="FaderPort8 Mix Management Buttons" src="/images/fp8_mixmanage.png">
+  <figcaption>
+               FaderPort8 Mix Management Buttons
+  </figcaption>
 </figure>
 <ol class="inside">
   <li><kbd class="def">Audio</kbd>: View Audio Tracks only.</li>
@@ -364,8 +378,10 @@
   and pan automation modes respectively.
 </p>
 <figure class="left">
-  <img alt="FaderPort8 Automation Buttons"
-       src="/images/fp8_automation.png"/>
+  <img alt="FaderPort8 Automation Buttons" src="/images/fp8_automation.png">
+  <figcaption>
+               FaderPort8 Automation Buttons
+  </figcaption>
 </figure>
 <ol class="inside">
   <li><kbd class="def">Latch</kbd>: Currently not available in Ardour.</li>
@@ -400,8 +416,10 @@
 
 <h3>Miscellaneous</h3>
 <figure class="left">
-  <img alt="FaderPort8 Misc Buttons"
-       src="/images/fp8_misc.png"/>
+  <img alt="FaderPort8 Misc Buttons" src="/images/fp8_misc.png">
+  <figcaption>
+               FaderPort8 Misc Buttons
+  </figcaption>
 </figure>
 <ul class="inside">
   <li><kbd class="def">Solo Clear</kbd>: Reset all solo controls in the
@@ -479,6 +497,6 @@ The above also applies to Ardour-derivatives Harrison-Mixbus and Mixbus 32C with
     When editing those processors, the parameters follows track selection (for other plugins this is not possible since they may not be present).
   </li>
   <li>
-    Fader mode <strong>Sends</strong> shows mixbus-assigns first (before any optional aux-sends). The master-bus-assign is available on the "S"olo button of the right-most strip. 
+    Fader mode <strong>Sends</strong> shows mixbus-assigns first (before any optional aux-sends). The master-bus-assign is available on the "S"olo button of the right-most strip.
   </li>
 </ul>

diff --git a/include/vbap-panner.html b/include/vbap-panner.html
index 4da43e2dbcb96e8bc8218a23043deaf7e12db07f..1d89a43f3c92b725ac5726c9518944f75eb1fae7 100644 (file)
--- a/include/vbap-panner.html
+++ b/include/vbap-panner.html
@@ -82,7 +82,6 @@
   </figcaption>
 </figure>
 
-<!--<a href="/images/VBAP-panner-10.png"><img src="/images/VBAP-panner-10.png" class="right" style="width:150px;" alt="The VBAP panner with 10 outputs, in experimental 3D mode"></a>-->
 <p>
   For tracks with 10 outputs, Ardour will currently assume a 3-dimensional
   speaker layout corresponding to Auro-3D 10.1, which is a horizontal 5.1

diff --git a/include/working-with-extenders.html b/include/working-with-extenders.html
index eb0ea66c3873edfc5e72f82d7dc1e32fa6247b2b..8ae1a8c75523457aea1727ba8b34ac00774fe2c5 100644 (file)
--- a/include/working-with-extenders.html
+++ b/include/working-with-extenders.html
@@ -49,8 +49,14 @@
   and the bottom is the rightmost. The GUI shows explicitly the position
   of the main or master surface within the group of surfaces.
 </p>
-<p><img alt="the Mackie Control Device Dialog"
-     src="/images/mcp-extender-position.png"></p>
+
+<figure>
+  <img src="/images/mcp-extender-position.png" alt="The Mackie Control Device Dialog">
+  <figcaption>
+    The Mackie Control Device Dialog
+  </figcaption>
+</figure>
+
 <p>
   The <code>MasterPosition</code> value is the position the master unit
   (with the master fader) is located at within the group of surfaces.

diff --git a/include/zoom-controls.html b/include/zoom-controls.html
index 86dd7566faa1910914434886d3043131cd4957c2..87b3a857c9a8fde73a9bcd1b7cc7a6c0c6cab00e 100644 (file)
--- a/include/zoom-controls.html
+++ b/include/zoom-controls.html
@@ -1,5 +1,10 @@
 
-<img class="left" src="/images/toolbar-zoom.png" alt="Editor toolbar's zoom">
+<figure class="left">
+  <img src="/images/toolbar-zoom.png" alt="Editor toolbar's zoom">
+  <figcaption>
+    Editor toolbar's zoom
+  </figcaption>
+</figure>
 
 <p>The zoom controls allow to navigate the session along both the time and track axes.</p>
 

diff --git a/source/images/225-ARDOUR_1_2_1.png b/source/images/225-ARDOUR_1_2_1.png
deleted file mode 100644 (file)
index 040d50f..0000000
Binary files a/source/images/225-ARDOUR_1_2_1.png and /dev/null differ

diff --git a/source/images/226-ARDOUR_1_2_1.png b/source/images/226-ARDOUR_1_2_1.png
deleted file mode 100644 (file)
index a14b839..0000000
Binary files a/source/images/226-ARDOUR_1_2_1.png and /dev/null differ