// cd_bios_boot("C:\\ftp\\jaguar\\cd\\primalrage.cdi");
// cd_bios_boot("C:\\ftp\\jaguar\\cd\\Dragons Lair.cdi");
-// NTSC PAL
-// GPU/DSP/video clock rate 26.590906 26.593900
-// 68000 clock rate 13.295453 13.296950
-// (clock rates in MHz)
-
// Should these be hardwired or read from VP?
jaguar_screen_scanlines = (hardwareTypeNTSC ? 524 : 624);
//Should the divisor be 50 for PAL??? Let's try it!
- m68k_cycles_per_scanline = (hardwareTypeNTSC ? 13295453 : 13296950) / (jaguar_screen_scanlines * (hardwareTypeNTSC ? 60 : 50));
+ m68k_cycles_per_scanline = (hardwareTypeNTSC ? M68K_CLOCK_RATE_NTSC : M68K_CLOCK_RATE_PAL) / (jaguar_screen_scanlines * (hardwareTypeNTSC ? 60 : 50));
gpu_cycles_per_scanline = dsp_cycles_per_scanline
- = (hardwareTypeNTSC ? 26590906 : 26593900) / (jaguar_screen_scanlines * (hardwareTypeNTSC ? 60 : 50));
+ = (hardwareTypeNTSC ? RISC_CLOCK_RATE_NTSC : RISC_CLOCK_RATE_PAL) / (jaguar_screen_scanlines * (hardwareTypeNTSC ? 60 : 50));
-#ifdef SOUND_OUTPUT
- ws_audio_init();
-#endif
+//#ifdef SOUND_OUTPUT
+// ws_audio_init();
+//#endif
m68k_set_cpu_type(M68K_CPU_TYPE_68000);
gpu_init();
WriteLog("Jaguar: VBL interrupt is %s\n", ((tom_irq_enabled(IRQ_VBLANK)) && (jaguar_interrupt_handler_is_valid(64))) ? "enabled" : "disabled");
M68K_show_context();
//#endif
-#ifdef SOUND_OUTPUT
- ws_audio_done();
-#endif
+//#ifdef SOUND_OUTPUT
+// ws_audio_done();
+//#endif
cd_bios_done();
cdrom_done();
tom_done();
}
// WriteLog("jaguar_reset():\n");
-#ifdef SOUND_OUTPUT
- ws_audio_reset();
-#endif
+//#ifdef SOUND_OUTPUT
+// ws_audio_reset();
+//#endif
cd_bios_reset();
tom_reset();
jerry_reset();
dsp_exec(dsp_cycles_per_scanline);
backbuffer += tom_width;
}
-#ifdef SOUND_OUTPUT
- system_sound_update();
-#endif
+//#ifdef SOUND_OUTPUT
+// system_sound_update();
+//#endif
}
//
}
}
-#ifdef SOUND_OUTPUT
- system_sound_update();
-#endif
+//#ifdef SOUND_OUTPUT
+// system_sound_update();
+//#endif
}
// Temp debugging stuff
static int32 jerry_timer_2_counter;
static uint32 jerry_i2s_interrupt_divide = 8;
-static int32 jerry_i2s_interrupt_timer = -1;
-static int32 jerry_i2s_interrupt_cycles_per_scanline = 0;
+static int32 jerry_i2s_interrupt_timer = -1;
+static int32 jerry_i2s_interrupt_cycles_per_scanline = 0;
void jerry_i2s_exec(uint32 cycles)
{
+ // Why is it called this? Instead of SCLK?
jerry_i2s_interrupt_divide &= 0xFF;
if (jerry_i2s_interrupt_timer == -1)
{
uint32 jerry_i2s_int_freq = (26591000 / 64) / (jerry_i2s_interrupt_divide + 1);
+//Note: The formula is system_clock_freq / (2 * (N + 1)), and to get 16 bits each of
+// left & right channel, ...
+//
+//WriteLog("SCLK: Setting serial clock freqency to %u Hz...\n", jerry_i2s_int_freq);
+//WriteLog("SCLK: Real serial clock freqency would be %u Hz (N=%u)...\n", 26590906 / (2 * (jerry_i2s_interrupt_divide + 1)), jerry_i2s_interrupt_divide);
+//WTF is this???
jerry_i2s_interrupt_cycles_per_scanline = 13300000 / jerry_i2s_int_freq;
jerry_i2s_interrupt_timer = jerry_i2s_interrupt_cycles_per_scanline;
//WriteLog("jerry: i2s interrupt rate set to %i hz (every %i cpu clock cycles) jerry_i2s_interrupt_divide=%i\n",jerry_i2s_int_freq,jerry_i2s_interrupt_cycles_per_scanline,jerry_i2s_interrupt_divide);
- pcm_set_sample_rate(jerry_i2s_int_freq);
+//No need, we write it directly pcm_set_sample_rate(jerry_i2s_int_freq);
}
jerry_i2s_interrupt_timer -= cycles;
// note : commented since the sound doesn't work properly else
+// !!! FIX !!!
if (1)//jerry_i2s_interrupt_timer<=0)
{
// i2s interrupt
clock_init();
anajoy_init();
joystick_init();
+ DACInit();
//This should be handled with the cart initialization...
// eeprom_init();
memory_malloc_secure((void **)&jerry_ram_8, 0x10000, "JERRY RAM/ROM");
memcpy(&jerry_ram_8[0xD000], wave_table, 0x1000);
-
-/*for(int i=0; i<0x1000; i++)
- WriteLog("WT byte, JERRY byte: %02X, %02X\n", wave_table[i], jerry_ram_8[0xD000+i]);//*/
}
void jerry_reset(void)
joystick_reset();
eeprom_reset();
jerry_reset_i2s_timer();
+ DACReset();
memset(jerry_ram_8, 0x00, 0xD000); // Don't clear out the Wavetable ROM...!
jerry_ram_8[JERRY_CONFIG+1] |= 0x10; // NTSC (bit 4)
jerry_timer_2_divider = 0xFFFF;
jerry_timer_1_counter = 0;
jerry_timer_2_counter = 0;
-
}
void jerry_done(void)
clock_done();
anajoy_done();
joystick_done();
+ DACDone();
eeprom_done();
}
//
// JERRY byte access (read)
//
-
unsigned jerry_byte_read(unsigned int offset)
{
#ifdef JERRY_DEBUG
//
// JERRY word access (read)
//
-
unsigned jerry_word_read(unsigned int offset)
{
#ifdef JERRY_DEBUG
//
// JERRY byte access (write)
//
-
void jerry_byte_write(unsigned offset, unsigned data)
{
#ifdef JERRY_DEBUG
dsp_byte_write(offset, data);
return;
}
+ // SCLK ($F1A150--8 bits wide)
else if ((offset >= 0xF1A152) && (offset <= 0xF1A153))
{
// WriteLog("i2s: writing 0x%.2x to SCLK\n",data);
//
// JERRY word access (write)
//
-
void jerry_word_write(unsigned offset, unsigned data)
{
#ifdef JERRY_DEBUG
dsp_word_write(offset, data);
return;
}
- else if (offset == 0xF1A152)
+ else if (offset == 0xF1A152) // Bottom half of SCLK ($F1A150)
{
// WriteLog("i2s: writing 0x%.4x to SCLK\n",data);
jerry_i2s_interrupt_divide = data & 0xFF;
// Need to handle (unaligned) cases???
return;
}
- else if ((offset >= 0xF1A148) && (offset < 0xF1A150))
+ // LTXD/RTXD/SCLK/SMODE $F1A148/4C/50/54 (really 16-bit registers...)
+ else if (offset >= 0xF1A148 && offset <= 0xF1A156)
{
- pcm_word_write(offset - 0xF1A148, data);
+ DACWriteWord(offset, data);
return;
}
else if ((offset >= 0xF10010) && (offset < 0xF10016))
}
else if ((offset >= 0xF17C00) && (offset < 0xF17C02))
{
+//I think this was removed from the Jaguar. If so, then we don't need this...!
anajoy_word_write(offset, data);
return;
}
//#endif
#include <time.h>
#include <SDL.h>
-#include "SDLptc.h"
+//#include "SDLptc.h"
#include "jaguar.h"
void main_screen_switch(void);
#define BUTTON_6 14
#define BUTTON_3 15
-
#define BUTTON_A 16
#define BUTTON_B 17
#define BUTTON_C 18
bool keyHeld1 = false, keyHeld2 = false, keyHeld3 = false;
int objectPtr = 0;
+
+void main_screen_switch(void)
+{
+ extern SDL_Surface * mainSurface;
+ extern Uint32 mainSurfaceFlags;
+ extern bool fullscreen;
+
+ fullscreen = !fullscreen;
+ mainSurfaceFlags &= ~SDL_FULLSCREEN;
+ if (fullscreen)
+ mainSurfaceFlags |= SDL_FULLSCREEN;
+
+//???Should we do this???
+// SDL_FreeSurface(mainSurface);
+ mainSurface = SDL_SetVideoMode(tom_width, tom_height, 16, mainSurfaceFlags);
+
+ if (mainSurface == NULL)
+ {
+ WriteLog("Joystick: SDL is unable to set the video mode: %s\n", SDL_GetError());
+ exit(1);
+ }
+
+ SDL_WM_SetCaption("Virtual Jaguar", "Virtual Jaguar");
+/* if (fullscreen)
+ console.option("fullscreen output");
+ else
+ console.option("windowed output");*/
+
+// console.close();
+// console.open("Virtual Jaguar", tom_width, tom_height, format);
+}
+
void joystick_init(void)
{
joystick_reset();
void joystick_exec(void)
{
+ extern SDL_Joystick * joystick;
+ extern bool useJoystick;
uint8 * keystate = SDL_GetKeyState(NULL);
- extern Console console;
+// extern Console console;
memset(joypad_0_buttons, 0, 21);
memset(joypad_1_buttons, 0, 21);
blit_start_log = 0;
iLeft = iRight = false;
- if ((keystate[SDLK_LALT]) & (keystate[SDLK_RETURN]))
+ if ((keystate[SDLK_LALT] || keystate[SDLK_RALT]) & keystate[SDLK_RETURN])
main_screen_switch();
/* Added/Changed by SDLEMU (http://sdlemu.ngemu.com) */
/* Added/Changed by SDLEMU (http://sdlemu.ngemu.com */
/* Joystick support */
- if (console.JoyEnabled() == 1)
+// if (console.JoyEnabled() == 1)
+ if (useJoystick)
{
- int16 x = SDL_JoystickGetAxis(console.joystick, 0),
- y = SDL_JoystickGetAxis(console.joystick, 1);
+// int16 x = SDL_JoystickGetAxis(console.joystick, 0),
+// y = SDL_JoystickGetAxis(console.joystick, 1);
+ int16 x = SDL_JoystickGetAxis(joystick, 0),
+ y = SDL_JoystickGetAxis(joystick, 1);
if (x > 16384)
joypad_0_buttons[BUTTON_R] = 0x01;
if (y < -16384)
joypad_0_buttons[BUTTON_U] = 0x01;
- if (SDL_JoystickGetButton(console.joystick, 0) == SDL_PRESSED)
+// if (SDL_JoystickGetButton(console.joystick, 0) == SDL_PRESSED)
+ if (SDL_JoystickGetButton(joystick, 0) == SDL_PRESSED)
joypad_0_buttons[BUTTON_A] = 0x01;
- if (SDL_JoystickGetButton(console.joystick, 1) == SDL_PRESSED)
+// if (SDL_JoystickGetButton(console.joystick, 1) == SDL_PRESSED)
+ if (SDL_JoystickGetButton(joystick, 1) == SDL_PRESSED)
joypad_0_buttons[BUTTON_B] = 0x01;
- if (SDL_JoystickGetButton(console.joystick, 2) == SDL_PRESSED)
+// if (SDL_JoystickGetButton(console.joystick, 2) == SDL_PRESSED)
+ if (SDL_JoystickGetButton(joystick, 2) == SDL_PRESSED)
joypad_0_buttons[BUTTON_C] = 0x01;
}
// ------------------------------------------------------------
#include <SDL.h>
-#include "SDLptc.h"
+//#include "SDLptc.h"
#include "tom.h"
#include "gpu.h"
#include "objectp.h"
#define BG 0x58
//This can be defined in the makefile as well...
-//(It's easier to do it here...)
+//(It's easier to do it here, though...)
//#define TOM_DEBUG
extern uint32 jaguar_mainRom_crc32;
-extern Console console;
-extern Surface * surface;
+//extern Console console;
+//extern Surface * surface;
extern uint8 objectp_running;
static uint8 * tom_ram_8;
uint32 TOMGetSDLScreenPitch(void)
{
- return surface->pitch();
+ extern SDL_Surface * surface;
+
+ return surface->pitch;
}
//
{
op_init();
blitter_init();
- pcm_init();
+//This should be done by JERRY! pcm_init();
memory_malloc_secure((void **)&tom_ram_8, 0x4000, "TOM RAM");
tom_reset();
// Setup the non-stretchy scanline rendering...
void tom_done(void)
{
op_done();
- pcm_done();
+//This should be done by JERRY! pcm_done();
blitter_done();
WriteLog("TOM: Resolution %i x %i %s\n", tom_getVideoModeWidth(), tom_getVideoModeHeight(),
videoMode_to_str[tom_getVideoMode()]);
op_reset();
blitter_reset();
- pcm_reset();
+//This should be done by JERRY! pcm_reset();
memset(tom_ram_8, 0x00, 0x4000);
if ((width != tom_width) || (height != tom_height))
{
- ws_audio_done();
+ extern SDL_Surface * surface, * mainSurface;
+ extern Uint32 mainSurfaceFlags;
+// ws_audio_done();
static char window_title[256];
- delete surface;
+// delete surface;
tom_width = width, tom_height = height;
- Format format(16, 0x007C00, 0x00003E0, 0x0000001F);
- surface = new Surface(tom_width, tom_height, format);
- console.close();
- sprintf(window_title, "Virtual Jaguar (%i x %i)", (int)tom_width, (int)tom_height);
- console.open(window_title, width, tom_height, format);
+// Format format(16, 0x007C00, 0x00003E0, 0x0000001F);
+// surface = new Surface(tom_width, tom_height, format);
+ SDL_FreeSurface(surface);
+ surface = SDL_CreateRGBSurface(SDL_SWSURFACE, tom_width, tom_height,
+ 16, 0x7C00, 0x03E0, 0x001F, 0);
+ if (surface == NULL)
+ {
+ WriteLog("TOM: Could not create primary SDL surface: %s", SDL_GetError());
+ exit(1);
+ }
- ws_audio_init();
- ws_audio_reset();
+ sprintf(window_title, "Virtual Jaguar (%i x %i)", (int)tom_width, (int)tom_height);
+// console.close();
+// console.open(window_title, width, tom_height, format);
+//???Should we do this???
+// SDL_FreeSurface(mainSurface);
+ mainSurface = SDL_SetVideoMode(tom_width, tom_height, 16, mainSurfaceFlags);
+
+ if (mainSurface == NULL)
+ {
+ WriteLog("Joystick: SDL is unable to set the video mode: %s\n", SDL_GetError());
+ exit(1);
+ }
+
+ SDL_WM_SetCaption(window_title, window_title);
+
+// ws_audio_init();
+// ws_audio_reset();
}
}
}
// Cleanups/fixes by James L. Hammons
//
-//
-// Important info:
-//
-// NTSC PAL
-// GPU/DSP/video clock rate 26.590906 26.593900
-// 68000 clock rate 13.295453 13.296950
-// (clock rates in MHz)
-//
-
// Added by SDLEMU (http://sdlemu.ngemu.com)
// Added for GCC UNIX compatibility
#ifdef __GCCUNIX__
#include <time.h>
#include <SDL.h>
-#include "SDLptc.h"
+//#include "SDLptc.h" // Ick! Aargh! Bleah!
#include "jaguar.h"
#include "crc32.h"
#include "unzip.h"
// Uncomment this for speed control
//#define SPEED_CONTROL
-//
// Private function prototypes
-//
uint32 JaguarLoadROM(uint8 *, char *);
void JaguarLoadCart(uint8 *, char *);
-//
+// External variables
+
+//These two should be local!
+extern bool jaguar_use_bios;
+extern bool dsp_enabled;
+
+extern uint8 * jaguar_mainRam;
+extern uint8 * jaguar_bootRom;
+extern uint8 * jaguar_mainRom;
+
// Various paths
-//
-//static char *jaguar_bootRom_path="c:/jaguarEmu/newload.img";
static char * jaguar_bootRom_path = "./bios/jagboot.rom";
+//static char *jaguar_bootRom_path="c:/jaguarEmu/newload.img";
//static char *jaguar_bootRom_path="./bios/JagOS.bin";
char * jaguar_eeproms_path = "./eeproms/";
char jaguar_boot_dir[1024];
-//static char romLoadDialog_filePath[1024];
+SDL_Surface * surface, * mainSurface;
+SDL_Joystick * joystick;
+Uint32 mainSurfaceFlags = SDL_SWSURFACE;
-Console console;
-Surface * surface;
-Format format(16, 0x007C00, 0x00003E0, 0x0000001F);
+//Console console;
+//Surface * surface;
+//Format format(16, 0x007C00, 0x00003E0, 0x0000001F);
bool finished = false;
bool fullscreen = false;
bool hardwareTypeNTSC = true; // Set to false for PAL
-//
-// External variables
-//
+bool useJoystick = false;
-extern bool jaguar_use_bios;
-extern bool dsp_enabled;
-extern uint8 * jaguar_mainRam;
-extern uint8 * jaguar_bootRom;
-extern uint8 * jaguar_mainRom;
-
-
-void main_screen_switch(void)
-{
- fullscreen = !fullscreen;
- if (fullscreen)
- console.option("fullscreen output");
- else
- console.option("windowed output");
- console.close();
- console.open("Virtual Jaguar", tom_width, tom_height, format);
-}
// Added/changed by SDLEMU http://sdlemu.ngemu.com
-uint32 totalFrames;//so we can grab this from somewhere else...
+uint32 totalFrames;//so we can grab this from elsewhere...
int main(int argc, char * argv[])
{
uint32 startTime;//, totalFrames;//, endTime;//, w, h;
printf("Portions massaged by James L. Hammons (WIN32)\n");
printf("Contact: http://sdlemu.ngemu.com/ | sdlemu@ngemu.com\n");
- console.option("windowed output");
+// console.option("windowed output");
// BIOS is now ON by default--use the -nobios switch to turn it off!
jaguar_use_bios = true;
haveCart = true; // It looks like we have a cartridge!
if (!strcmp(argv[i], "-fullscreen"))
- {
+// {
fullscreen = true;
- console.option("fullscreen output");
- }
+// console.option("fullscreen output");
+// }
- if (!strcmp(argv[i], "-window"))
- console.option("windowed output");
+//We *don't* need this option!
+/* if (!strcmp(argv[i], "-window"))
+// console.option("windowed output");
+ fullscreen = false;*/
if (!strcmp(argv[i], "-joystick"))
- console.option("joystick enabled");
+// console.option("joystick enabled");
+ useJoystick = true;
if (!strcmp(argv[i], "-joyport"))
{
{
printf("Usage: \n\n");
printf("vj [romfile] [switches]\n");
- printf(" -? or -help : Display usage and switches \n");
- printf(" -fullscreen : Enable fullscreen mode \n");
- printf(" -window : Enable windowed mode (default) \n");
- printf(" -frameskip 1-10 : Enable frameskip 1 (default) - 10 \n");
- printf(" -joystick : Enable joystick/gamepad \n");
- printf(" -joyport 0-3 : Select desired joystick port \n");
- printf(" -nobios : Boot cart without using Jaguar BIOS ROM \n");
- printf(" -dspon : Force VJ to use the DSP \n");
- printf(" -pal : Force VJ to PAL mode (default is NTSC) \n");
+ printf(" -? or -help : Display usage and switches \n");
+ printf(" -fullscreen : Enable fullscreen mode (windowed default)\n");
+ printf(" -frameskip 1-10 : Enable frameskip 1 (default) - 10 \n");
+ printf(" -joystick : Enable joystick/gamepad \n");
+ printf(" -joyport 0-3 : Select desired joystick port \n");
+ printf(" -nobios : Boot cart without using Jaguar BIOS ROM \n");
+ printf(" -dspon : Force VJ to use the DSP \n");
+ printf(" -pal : Force VJ to PAL mode (default is NTSC) \n");
printf("\nInvoking Virtual Jagaur with no ROM file will cause it to boot up\n");
printf("with the Jaguar BIOS.\n");
- return true;
+ return 1;
}
}
// Get the cartridge ROM (if passed in)
if (haveCart)
- {
JaguarLoadCart(jaguar_mainRom, argv[1]);
- eeprom_init();
- }
jaguar_reset();
- // Setting up the backbuffer
+ // Set up the backbuffer
int16 * backbuffer = (int16 *)malloc(845 * 525 * sizeof(int16));
memset(backbuffer, 0xAA, tom_getVideoModeWidth() * tom_getVideoModeHeight() * sizeof(int16));
- // Setting up the primary SDL display
- surface = new Surface(tom_getVideoModeWidth(), tom_getVideoModeHeight(), format);
+ // Set up SDL library
+ if (SDL_Init(SDL_INIT_VIDEO | SDL_INIT_JOYSTICK | SDL_INIT_AUDIO | SDL_INIT_TIMER | SDL_INIT_NOPARACHUTE) < 0)
+ {
+ WriteLog("VJ: Could not initialize the SDL library: %s", SDL_GetError());
+ exit(1);
+ }
+
+ // Let's get proper info about the platform we're running on.
+ const SDL_VideoInfo * info = SDL_GetVideoInfo();
+
+ if (!info)
+ {
+ WriteLog("VJ: SDL is unable to get the video query: %s\n", SDL_GetError());
+ exit(1);
+ }
+
+ if (info->hw_available)
+ mainSurfaceFlags = SDL_HWSURFACE | SDL_HWPALETTE | SDL_DOUBLEBUF;
+
+ if (info->blit_hw)
+ mainSurfaceFlags |= SDL_HWACCEL;
+
+ if (fullscreen)
+ mainSurfaceFlags |= SDL_FULLSCREEN;
+
+ // Note: mainSurface is *never* used again!
+ //Not true--had to look at what's what here...
+ mainSurface = SDL_SetVideoMode(tom_getVideoModeWidth(), tom_getVideoModeHeight(), 16, mainSurfaceFlags);
+
+ if (mainSurface == NULL)
+ {
+ WriteLog("VJ: SDL is unable to set the video mode: %s\n", SDL_GetError());
+ exit(1);
+ }
+
+ SDL_WM_SetCaption("Virtual Jaguar", "Virtual Jaguar");
+
+ // Create the primary SDL display (16 BPP, 5/5/5 RGB format)
+// surface = new Surface(tom_getVideoModeWidth(), tom_getVideoModeHeight(), format);
+//Format format(16, 0x007C00, 0x00003E0, 0x0000001F);
+ surface = SDL_CreateRGBSurface(SDL_SWSURFACE, tom_getVideoModeWidth(),
+ tom_getVideoModeHeight(), 16, 0x7C00, 0x03E0, 0x001F, 0);
+ if (surface == NULL)
+ {
+ WriteLog("VJ: Could not create primary SDL surface: %s", SDL_GetError());
+ exit(1);
+ }
// Initialize Joystick support under SDL
- if (console.JoyEnabled() == 1)
+// if (console.JoyEnabled() == 1)
+ if (useJoystick)
{
if (SDL_NumJoysticks() <= 0)
{
- console.option("joystick disabled");
+// console.option("joystick disabled");
+ useJoystick = false;
printf("No joystick(s) or joypad(s) detected on your system. Using keyboard...\n");
}
else
{
- if ((console.joystick = SDL_JoystickOpen(nJoyport)) == 0)
+// if ((console.joystick = SDL_JoystickOpen(nJoyport)) == 0)
+ if ((joystick = SDL_JoystickOpen(nJoyport)) == 0)
{
- console.option("joystick disabled");
+// console.option("joystick disabled");
+ useJoystick = false;
printf("Unable to open a Joystick on port: %d\n", (int)nJoyport);
}
else
}
// Open the display and start emulating some 3l337 Atari Jaguar games :P
- console.open("Virtual Jaguar", tom_getVideoModeWidth(), tom_getVideoModeHeight(), format);
-
+// console.open("Virtual Jaguar", tom_getVideoModeWidth(), tom_getVideoModeHeight(), format);
+
totalFrames = 0;
startTime = clock();
nNormalLast = 0; // Last value of timeGetTime()
// Simple frameskip
if (nFrame == nFrameskip)
{
- int32 * vs = (int32 *)surface->lock();
- memcpy(vs, backbuffer, tom_width * tom_height * 2);
- surface->unlock();
- surface->copy(console);
- console.update();
+// int32 * vs = (int32 *)surface->lock();
+ if (SDL_MUSTLOCK(surface))
+ while (SDL_LockSurface(surface) < 0)
+ SDL_Delay(10);
+// uint8 * vs = (Uint8 *)surface->pixels;
+// memcpy(vs, backbuffer, tom_width * tom_height * 2);
+ memcpy(surface->pixels, backbuffer, tom_width * tom_height * 2);
+// surface->unlock();
+ if (SDL_MUSTLOCK(surface))
+ SDL_UnlockSurface(surface);
+// surface->copy(console);
+ SDL_Rect srcrect, dstrect;
+ srcrect.x = srcrect.y = 0, srcrect.w = surface->w, srcrect.h = surface->h;
+ dstrect.x = dstrect.y = 0, dstrect.w = surface->w, dstrect.h = surface->h;
+// SDL_LowerBlit(surface, &srcrect, dst.surface, &dstrect);
+ SDL_BlitSurface(surface, &srcrect, mainSurface, &dstrect);
+// dst.updates[dst.nupdates++] = dstrect;
+// console.update();
+ SDL_Flip(mainSurface);
+// nupdates = 0;
+
nFrame = 0;
}
else
int elapsedTime = clock() - startTime;
int fps = (1000 * totalFrames) / elapsedTime;
fprintf(log_get(), "Statistics: %i FPS\n", fps);
-
- if (console.JoyEnabled() == 1) {}
-
+
jaguar_done();
version_done();
memory_done();
log_done();
- console.close(); // Close SDL items as last!
+// console.close(); // Close SDL items as last!
+ SDL_JoystickClose(joystick);
+ SDL_FreeSurface(surface);
+ SDL_QuitSubSystem(SDL_INIT_VIDEO | SDL_INIT_JOYSTICK | SDL_INIT_AUDIO | SDL_INIT_TIMER);
+ SDL_Quit();
return 0;
}
uint32 romsize = JaguarLoadROM(mem, path);
jaguar_mainRom_crc32 = crc32_calcCheckSum(jaguar_mainRom, romsize);
WriteLog( "CRC: %08X\n", (unsigned int)jaguar_mainRom_crc32);
+ eeprom_init();
}