X-Git-Url: http://shamusworld.gotdns.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=src%2Fvideo.cpp;h=65a9fdde3f41923a33e74dcc4d7b92d5fa28d938;hb=ba85b1c5daf45e9d78201fb80542b79eb6f8c92d;hp=aa694451f1f5b26a37664b7292e09f091db01787;hpb=e38df3d3caf3c101357c49715139ceb6e1eac1e2;p=virtualjaguar diff --git a/src/video.cpp b/src/video.cpp index aa69445..65a9fdd 100644 --- a/src/video.cpp +++ b/src/video.cpp @@ -15,13 +15,21 @@ //And now, they do! :-) SDL_Surface * surface, * mainSurface; Uint32 mainSurfaceFlags; -int16 * backbuffer; +//int16 * backbuffer; +uint32 * backbuffer; SDL_Joystick * joystick; // One of the reasons why OpenGL is slower then normal SDL rendering, is because // the data is being pumped into the buffer every frame with a overflow as result. // So, we going tot render every 1 frame instead of every 0 frame. -int frame_ticker = 0; + +// [Shamus] This isn't the case. OpenGL is slower because 60 frames a second is a +// lot of data to pump through the system. In any case, frameskip is probably +// a good idea for now, since most systems are probably too slow to run at +// 60 FPS. But doing so will have some nasty side effects in some games. +// You have been warned! + +int frame_ticker = vjs.frameSkip; // // Create SDL/OpenGL surfaces @@ -57,17 +65,29 @@ bool InitVideo(void) if (vjs.fullscreen) mainSurfaceFlags |= SDL_FULLSCREEN; - if (!vjs.useOpenGL) +/* if (!vjs.useOpenGL) // mainSurface = SDL_SetVideoMode(VIRTUAL_SCREEN_WIDTH, VIRTUAL_SCREEN_HEIGHT_NTSC, 16, mainSurfaceFlags); mainSurface = SDL_SetVideoMode(VIRTUAL_SCREEN_WIDTH, (vjs.hardwareTypeNTSC ? VIRTUAL_SCREEN_HEIGHT_NTSC : VIRTUAL_SCREEN_HEIGHT_PAL), 16, mainSurfaceFlags); else - // When OpenGL is used, we're going to use a standard resolution of 640x480. - // This way we have good scaling functionality and when the screen is resized - // because of the NTSC <-> PAL resize, we only have to re-create the texture - // instead of initializing the entire OpenGL texture en screens. - mainSurface = SDL_SetVideoMode(640, 480, 16, mainSurfaceFlags); + // When OpenGL is used, we're going to use a standard resolution of 640x480. + // This way we have good scaling functionality and when the screen is resized + // because of the NTSC <-> PAL resize, we only have to re-create the texture + // instead of initializing the entire OpenGL texture en screens. + mainSurface = SDL_SetVideoMode(640, 480, 16, mainSurfaceFlags);//*/ +//24BPP + if (!vjs.useOpenGL) +// mainSurface = SDL_SetVideoMode(VIRTUAL_SCREEN_WIDTH, VIRTUAL_SCREEN_HEIGHT_NTSC, 16, mainSurfaceFlags); + mainSurface = SDL_SetVideoMode(VIRTUAL_SCREEN_WIDTH, + (vjs.hardwareTypeNTSC ? VIRTUAL_SCREEN_HEIGHT_NTSC : VIRTUAL_SCREEN_HEIGHT_PAL), + 32, mainSurfaceFlags); + else + // When OpenGL is used, we're going to use a standard resolution of 640x480. + // This way we have good scaling functionality and when the screen is resized + // because of the NTSC <-> PAL resize, we only have to re-create the texture + // instead of initializing the entire OpenGL texture en screens. + mainSurface = SDL_SetVideoMode(640, 480, 32, mainSurfaceFlags);//*/ if (mainSurface == NULL) { @@ -78,9 +98,17 @@ bool InitVideo(void) SDL_WM_SetCaption("Virtual Jaguar", "Virtual Jaguar"); // Create the primary SDL display (16 BPP, 5/5/5 RGB format) - surface = SDL_CreateRGBSurface(SDL_SWSURFACE, VIRTUAL_SCREEN_WIDTH, +/* surface = SDL_CreateRGBSurface(SDL_SWSURFACE, VIRTUAL_SCREEN_WIDTH, (vjs.hardwareTypeNTSC ? VIRTUAL_SCREEN_HEIGHT_NTSC : VIRTUAL_SCREEN_HEIGHT_PAL), - 16, 0x7C00, 0x03E0, 0x001F, 0); + 16, 0x7C00, 0x03E0, 0x001F, 0);//*/ +//24BPP + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, VIRTUAL_SCREEN_WIDTH, + (vjs.hardwareTypeNTSC ? VIRTUAL_SCREEN_HEIGHT_NTSC : VIRTUAL_SCREEN_HEIGHT_PAL), 32, +#if SDL_BYTEORDER == SDL_BIG_ENDIAN + 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF); +#else + 0x000000FF, 0x0000FF00, 0x00FF0000, 0xFF000000); +#endif//*/ if (surface == NULL) { @@ -89,15 +117,15 @@ bool InitVideo(void) } if (vjs.useOpenGL) - // Let us setup OpenGL and our rendering texture. We give the src (surface) and the - // dst (mainSurface) display as well as the automatic bpp selection as options so that - // our texture is automaticly created :) - sdlemu_init_opengl(surface, mainSurface, 1 /*method*/, - vjs.glFilter /*texture type (linear, nearest)*/, - NULL /* Automatic bpp selection based upon src */); - + // Let us setup OpenGL and our rendering texture. We give the src (surface) and the + // dst (mainSurface) display as well as the automatic bpp selection as options so that + // our texture is automaticly created :) + sdlemu_init_opengl(surface, mainSurface, 1 /*method*/, + vjs.glFilter /*texture type (linear, nearest)*/, + 0 /* Automatic bpp selection based upon src */); // Initialize Joystick support under SDL + if (vjs.useJoystick) { if (SDL_NumJoysticks() <= 0) @@ -120,11 +148,17 @@ bool InitVideo(void) // Set up the backbuffer //To be safe, this should be 1280 * 625 * 2... // backbuffer = (int16 *)malloc(845 * 525 * sizeof(int16)); - backbuffer = (int16 *)malloc(1280 * 625 * sizeof(int16)); +/* backbuffer = (int16 *)malloc(1280 * 625 * sizeof(int16)); // memset(backbuffer, 0x44, VIRTUAL_SCREEN_WIDTH * VIRTUAL_SCREEN_HEIGHT_NTSC * sizeof(int16)); memset(backbuffer, 0x44, VIRTUAL_SCREEN_WIDTH * (vjs.hardwareTypeNTSC ? VIRTUAL_SCREEN_HEIGHT_NTSC : VIRTUAL_SCREEN_HEIGHT_PAL) - * sizeof(int16)); + * sizeof(int16));//*/ +//24BPP + backbuffer = (uint32 *)malloc(1280 * 625 * sizeof(uint32)); +// memset(backbuffer, 0x44, VIRTUAL_SCREEN_WIDTH * VIRTUAL_SCREEN_HEIGHT_NTSC * sizeof(int16)); + memset(backbuffer, 0x44, VIRTUAL_SCREEN_WIDTH * + (vjs.hardwareTypeNTSC ? VIRTUAL_SCREEN_HEIGHT_NTSC : VIRTUAL_SCREEN_HEIGHT_PAL) + * sizeof(uint32)); return true; } @@ -151,21 +185,25 @@ void RenderBackbuffer(void) while (SDL_LockSurface(surface) < 0) SDL_Delay(10); - memcpy(surface->pixels, backbuffer, tom_getVideoModeWidth() * tom_getVideoModeHeight() * 2); +// memcpy(surface->pixels, backbuffer, tom_getVideoModeWidth() * tom_getVideoModeHeight() * 2); + memcpy(surface->pixels, backbuffer, tom_getVideoModeWidth() * tom_getVideoModeHeight() * 4); if (SDL_MUSTLOCK(surface)) SDL_UnlockSurface(surface); - if (vjs.useOpenGL) { - // One of the reasons why OpenGL is slower then normal SDL rendering, is because - // the data is being pumped into the buffer every frame with a overflow as result. - // So, we going tot render every 1 fps instead of every 0 fps. - if ( frame_ticker != 0 ) { - sdlemu_draw_texture(mainSurface, surface, 1/*1=GL_QUADS*/); - frame_ticker = 0; // Reset frame_ticker to 0 otherwise we won't get - // backrendering "frameskip". - } else - frame_ticker = frame_ticker + 1; + if (vjs.useOpenGL) + { + // One of the reasons why OpenGL is slower then normal SDL rendering, is because + // the data is being pumped into the buffer every frame with a overflow as result. + // So, we going to render every 1 fps instead of every 0 fps. + // [Shamus] This is isn't why it's slower--see top of file for explanation... ;-) + if (frame_ticker == 0) + { + sdlemu_draw_texture(mainSurface, surface, 1/*1=GL_QUADS*/); + frame_ticker = vjs.frameSkip; // Reset frame_ticker + } + else + frame_ticker--; } else { @@ -183,7 +221,14 @@ void ResizeScreen(uint32 width, uint32 height) char window_title[256]; SDL_FreeSurface(surface); - surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, 16, 0x7C00, 0x03E0, 0x001F, 0); +// surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, 16, 0x7C00, 0x03E0, 0x001F, 0); +//24BPP + surface = SDL_CreateRGBSurface(SDL_SWSURFACE, width, height, 32, +#if SDL_BYTEORDER == SDL_BIG_ENDIAN + 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF); +#else + 0x000000FF, 0x0000FF00, 0x00FF0000, 0xFF000000); +#endif//*/ if (surface == NULL) { @@ -195,12 +240,12 @@ void ResizeScreen(uint32 width, uint32 height) if (vjs.useOpenGL) { - // Recreate the texture because of the NTSC <-> PAL screen resize. - sdlemu_create_texture( surface, mainSurface, vjs.glFilter , NULL); + // Recreate the texture because of the NTSC <-> PAL screen resize. + sdlemu_create_texture(surface, mainSurface, vjs.glFilter, 0); } else { - mainSurface = SDL_SetVideoMode(width, height, 16, mainSurfaceFlags); + mainSurface = SDL_SetVideoMode(width, height, 32, mainSurfaceFlags); if (mainSurface == NULL) { @@ -216,9 +261,17 @@ void ResizeScreen(uint32 width, uint32 height) // // Return the screen's pitch // -uint32 GetSDLScreenPitch(void) +/*uint32 GetSDLScreenPitch(void) { return surface->pitch; +}*/ + +// +// Return the screen's width in pixels +// +uint32 GetSDLScreenWidthInPixels(void) +{ + return surface->pitch / 4; // Pitch / 4 since we're in 32BPP mode } // @@ -236,7 +289,7 @@ void ToggleFullscreen(void) if (vjs.fullscreen) mainSurfaceFlags |= SDL_FULLSCREEN; - mainSurface = SDL_SetVideoMode(tom_width, tom_height, 16, mainSurfaceFlags); + mainSurface = SDL_SetVideoMode(tom_width, tom_height, 32, mainSurfaceFlags); if (mainSurface == NULL) {