X-Git-Url: http://shamusworld.gotdns.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=src%2Ffileio.h;fp=src%2Ffileio.h;h=db11d87edbfdb47aaba6e8a370117192e5772093;hb=63762cef81da80d12773c646a3b3154e3ae1d0fc;hp=0000000000000000000000000000000000000000;hpb=31d2453ee7e0b2f8b550fdc17f13b92bb9fab7ee;p=apple2

diff --git a/src/fileio.h b/src/fileio.h
new file mode 100644
index 0000000..db11d87
--- /dev/null
+++ b/src/fileio.h
@@ -0,0 +1,133 @@
+#ifndef __FILEIO_H__
+#define __FILEIO_H__
+
+#include <SDL.h>
+#include <stdio.h>
+#include <stdint.h>
+
+// N.B.: All 32/16-bit values are stored in little endian.  Which means, to
+//       read/write them safely, we need to use translators as this code may or
+//       may not be compiled on an architecture that supports little endian
+//       natively.
+
+struct WOZ1Track
+{
+	uint8_t bits[6646];
+	uint16_t byteCount;
+	uint16_t bitCount;
+	uint16_t splicePoint;
+	uint8_t spliceNibble;
+	uint8_t spliceBitCount;
+	uint16_t reserved;
+};
+
+struct WOZMetadata
+{
+	uint8_t metaTag[4];		// "META"
+	uint32_t metaSize;		// Size of the META chunk
+	uint8_t data[];			// Variable length array of metadata
+};
+
+struct WOZ1
+{
+	// Header
+	uint8_t magic[8];		// "WOZ1" $FF $0A $0D $0A
+	uint32_t crc32;			// CRC32 of the remaining data in the file
+
+	// INFO chunk
+	uint8_t infoTag[4];		// "INFO"
+	uint32_t infoSize;		// Always 60 bytes long
+	uint8_t infoVersion;	// Currently 1
+	uint8_t diskType;		// 1 = 5 1/4", 2 = 3 1/2"
+	uint8_t writeProtected;	// 1 = write protected disk
+	uint8_t synchronized;	// 1 = cross-track sync was used during imaging
+	uint8_t cleaned;		// 1 = fake bits removed from image
+	uint8_t creator[32];	// Software that made this image, padded with 0x20
+	uint8_t pad1[23];		// Padding to 60 bytes
+
+	// TMAP chunk
+	uint8_t tmapTag[4];		// "TMAP"
+	uint32_t tmapSize;		// Always 160 bytes long
+	uint8_t tmap[160];		// Track map, with empty tracks set to $FF
+
+	// TRKS chunk
+	uint8_t trksTag[4];		// "TRKS"
+	uint32_t trksSize;		// Varies, depending on # of tracks imaged
+	WOZ1Track track[];		// Variable length array for the track data proper
+};
+
+struct WOZTrack2
+{
+	uint16_t startingBlock;	// 512 byte block # where this track starts (relative to the start of the file)
+	uint16_t blockCount;	// # of blocks in this track
+	uint32_t bitCount;		// # of bits in this track
+};
+
+struct WOZ2
+{
+	// Header
+	uint8_t magic[8];		// "WOZ2" $FF $0A $0D $0A
+	uint32_t crc32;			// CRC32 of the remaining data in the file
+
+	// INFO chunk
+	uint8_t infoTag[4];		// "INFO"
+	uint32_t infoSize;		// Always 60 bytes long
+	uint8_t infoVersion;	// Currently 1
+	uint8_t diskType;		// 1 = 5 1/4", 2 = 3 1/2"
+	uint8_t writeProtected;	// 1 = write protected disk
+	uint8_t synchronized;	// 1 = cross-track sync was used during imaging
+	uint8_t cleaned;		// 1 = fake bits removed from image
+	uint8_t creator[32];	// Software that made this image, padded with 0x20
+	uint8_t diskSides;		// 5 1/4" disks always have 1 side (v2 from here on)
+	uint8_t bootSectorFmt;	// 5 1/4" only (0=unknown, 1=16 sector, 2=13 sector, 3=both)
+	uint8_t optimalBitTmg;	// In ticks, standard for 5 1/4" is 32 (4 µs)
+	uint16_t compatibleHW;	// Bitfield showing hardware compatibility (1=][, 2=][+, 4=//e (unenh), 8=//c, 16=//e (enh), 32=IIgs, 64=//c+, 128=///, 256=///+)
+	uint16_t requiredRAM;	// Minimum size in K, 0=unknown
+	uint16_t largestTrack;	// Number of 512 byte blocks used by largest track
+	uint8_t pad1[14];		// Padding to 60 bytes
+
+	// TMAP chunk
+	uint8_t tmapTag[4];		// "TMAP"
+	uint32_t tmapSize;		// Always 160 bytes long
+	uint8_t tmap[160];		// Track map, with empty tracks set to $FF
+
+	// TRKS chunk
+	uint8_t trksTag[4];		// "TRKS"
+	uint32_t trksSize;		// Varies, depending on # of tracks imaged
+	WOZTrack2 track[160];	// Actual track info (corresponding to TMAP data)
+	uint8_t data[];			// Variable length array for the track data proper
+};
+
+// Exported functions
+uint8_t * ReadFile(const char * filename, uint32_t * size);
+void InitWOZ2Headers(WOZ2 &);
+uint8_t * InitWOZ(uint32_t * pSize = NULL);
+uint8_t * UpconvertWOZ1ToWOZ2(uint8_t * woz1Data, uint32_t woz1Size, uint32_t * newSize);
+uint8_t CheckWOZType(const uint8_t * wozData, uint32_t wozSize);
+bool CheckWOZIntegrity(const uint8_t * wozData, uint32_t wozSize);
+bool SaveWOZ(const char * filename, WOZ2 * woz, uint32_t size);
+
+// Static in-line functions, for clarity & speed, mostly for reading values out
+// of the WOZ struct, which stores its data in LE; some for swapping variables
+static inline uint16_t Uint16LE(uint16_t v)
+{
+#if SDL_BYTEORDER == SDL_BIG_ENDIAN
+	return ((v & 0xFF) << 8) | ((v & 0xFF00) >> 8);
+#else
+	return v;
+#endif
+}
+
+
+static inline uint32_t Uint32LE(uint32_t v)
+{
+#if SDL_BYTEORDER == SDL_BIG_ENDIAN
+	return ((v & 0xFF) << 24) | ((v & 0xFF00) << 8)
+		| ((v & 0xFF0000) >> 8) | ((v & 0xFF000000) >> 24);
+#else
+	return v;
+#endif
+}
+
+#endif	// __FILEIO_H__
+