X-Git-Url: http://shamusworld.gotdns.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fusing-the-presonus-faderport.html;h=53d405d3d35508c9fb7ea0376e54286040bfd4ed;hb=0a8cc26fd7fb17c6adb9519916f606752309edfc;hp=62d9089fab8d49d73f1d61c9bdf990c27e238481;hpb=dfec6899ef2a121ccf2ff1d47008e7ac4844cf70;p=ardour-manual diff --git a/include/using-the-presonus-faderport.html b/include/using-the-presonus-faderport.html index 62d9089..53d405d 100644 --- a/include/using-the-presonus-faderport.html +++ b/include/using-the-presonus-faderport.html @@ -39,15 +39,21 @@ ports where your Faderport is connected.
- -
+ + +Once you select the input and output port, Ardour will initialize the Faderport and it will be ready to use. You only need do this once: once these ports are connected and your session has been saved, the connections will be made automatically in this and other future sessions. +
You do not need to use the power supply that comes with the Faderport but without it, the fader will not be motorized. This @@ -62,10 +68,10 @@ The Faderport's controls can be divided into three groups:
The transport buttons all work as you would expect. -
Rewind | +
When pressed on its own, starts the transport moving backwards. Successive presses speed up the "rewind" behaviour. @@ -95,9 +101,9 @@ If pressed while also holding the Shift button, the playhead will move to the session start marker. - - |
---|---|
Fast Forward | +
When pressed on its own, starts the transport moving faster than normal. Successive presses speed up the "fast forward" behaviour. @@ -106,23 +112,23 @@ If pressed while also holding the Shift button, the playhead will move to the session end marker. - - |
Stop | +
Stops the transport. Also used in combination with the Rewind
button to "return to zero".
-
- |
Play | +
Starts the transport. If pressed while the transport is
already rolling at normal speed, causes the playhead to jump to
the start of the last "roll" and continue rolling ("Poor man's
looping").
-
- |
Record Enable | +Toggles the global record enable setting + |
-
Mix | +
Possible actions include:
|
---|---|
Proj | +
Possible actions include:
|
Trns | +
Possible actions include:
|
Undo/Redo | +
Undo Causes the last operation carried out in the editor to be
- undone. When pressed in conjuction with the Shift button, it
- causes the most recent undone operation to be re-done.
-
- |
Punch | +
When pressed on its own, toggles punch recording. If there is no punch range set for the session, this will do nothing. @@ -205,20 +211,20 @@ When pressed in conjunction with the Shift button, this moves the playhead to the previous Marker - - |
User | +
See above. Any and all GUI-initiated actions can be driven with - by pressing this button on its own, or with a "long" press. + by pressing this button on its own, or with a "long" press. When pressed in conjunction with the Shift button, this will move the playhead to the next marker. - - |
Loop | +
When pressed on its own, this toggles loop playback. If the Ardour preference "Loop-is-mode" is enabled, this does nothing @@ -230,40 +236,40 @@ create a new (unnamed) marker at the current playhead position. - - + |
-
Mute | +
This toggles the mute setting of the currently controlled
track/bus. The button will be lit if the track/bus is muted.
-
- |
---|---|
Solo | +
This toggles the solo (or listen) setting of the currently
controlled track/bus. The button will be lit if the track/bus is
soloed (or set to listen mode).
-
- |
Rec | +
This toggles the record-enabled setting of the currently
controlled track/bus. The button will be lit if the track is
record-enabled. This button will do nothing if the Faderport is
controlling a bus.
-
- |
Fader | +
The fader controls the gain applied to the currently controlled
track/bus. If the Faderport is powered, changing the gain in
Ardour's GUI or via another control surface, or via automation,
- will result in the fader moving under its own control.
-
- |
Knob/Dial/Encoder | +
The knob controls 1 or 2 pan settings for the current controlled track/bus. When used alone, turning the knob controls @@ -283,32 +289,32 @@ in order to modify the input gain for the currently controlled track. - - |
Read | +
Enables playback/use of fader automation data by the controlled track/bus.
-
- |
Write | +
Puts the fader for the controlled track/bus into automation
write mode. While the transport is rolling, all fader changes
will be recorded to the fader automation lane for the relevant track/bus.
-
- |
Touch | +
Puts the fader for the controlled track/bus into automation
touch mode. While the transport is rolling, touching the fader
will initiate recording all fader changes until the fader is
released. When the fader is not being touched, existing
automation data will be played/used to control the gain level.
-
- |
Off | +This disables all automation modes for the currently controlled track/bus. Existing automation data will be left unmodified by any fader changes, and will not be used for controlling gain. - - + |
-
Left (arrow) | +
This causes the Ardour GUI to select the previous track/bus
(using the current visual order in the editor window), which
will in turn cause the Faderport to control that track. If there
is no previous track/bus, the selected track/bus is left
unchanged, and the Faderport continues to control it.
-
- |
---|---|
Right (arrow) | +
This causes the Ardour GUI to select the next track/bus
(using the current visual order in the editor window), which
will in turn cause the Faderport to control that track. If there
is no next track/bus, the selected track/bus is left
unchanged, and the Faderport continues to control it.
-
- |
Output | +
Pressing the Output button causes the Faderport to control the fader, pan, mute and solo settings of the Master bus. If @@ -362,11 +368,11 @@ where it is no longer apparent what is being controlled and what will happen if you try to change it. - - |
Bank | +The "Bank" button is currently not used by Ardour - - + |