X-Git-Url: http://shamusworld.gotdns.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fosc58-personal-monitoring-control.html;h=b092dd94f8f4a708292cdb4876c9b54528834455;hb=ca8c53473dfbcb7d4b483a5ce792bbf4b5caffe8;hp=2c948c370bfdeee31727f502343ba1971e06f84c;hpb=2098e011e638b5c86c56e68df7757975fc4d728f;p=ardour-manual diff --git a/include/osc58-personal-monitoring-control.html b/include/osc58-personal-monitoring-control.html index 2c948c3..b092dd9 100644 --- a/include/osc58-personal-monitoring-control.html +++ b/include/osc58-personal-monitoring-control.html @@ -18,7 +18,7 @@
  • Connect the output of that bus to one of the audio interface's playback ports that is not otherwise used. OSC - will now include this bus in it's list of aux buses as it + will now include this bus in it's list of aux busses as it no longer has it's output connected to the Master bus.
  • @@ -53,56 +53,54 @@ most surfaces used for this will only be able to handle one parameter.

    Commands

    -
    -
    /cue/connect
    -
    Returns a list of aux buses.
    -
    /cue/aux aux-number
    -
    where aux-number is an integer which is the aux bus - number this surface will use.
    -
    /cue/next_aux
    -
    Sets the the aux bus to one bus higher.
    -
    /cue/previous_aux
    -
    Sets the aux to one bus lower.
    -
    /cue/connect
    -
    Returns a list of aux buses.
    -
    /cue/fader position
    -
    where position is a float for the position of the fader - between 0.0 and 1.0.
    -
    /cue/mute state
    -
    where state is a float of 0.0 for mute off and 1.0 for mute on.
    -
    /cue/send/fader/id position
    -
    where position is a float for the position of the fader - between 0.0 and 1.0.
    -
    /cue/send/enable/id state
    -
    where state is a float of 0.0 for disable and 1.0 for enable.
    -
    + + + + + + + + + + + + + + + + + +
    /cue/connectReturns a list of aux busses.
    /cue/aux aux-numberwhere aux-number is an integer which is the aux bus + number this surface will use.
    /cue/next_auxSets the the aux bus to one bus higher.
    /cue/previous_auxSets the aux to one bus lower.
    /cue/fader positionwhere position is a float for the position of the fader + between 0.0 and 1.0.
    /cue/mute statewhere state is a float of 0.0 for mute off and 1.0 for mute on.
    /cue/send/fader/id positionwhere position is a float for the position of the fader + between 0.0 and 1.0.
    /cue/send/enable/id statewhere state is a float of 0.0 for disable and 1.0 for enable.

    Feedback

    -
    -
    /cue/name name
    -
    where name is a string that is the name of the currently - selected aux bus.
    -
    /cue/name/id name
    -
    where name is a string that is the name of the aux bus - that id belongs to.
    -
    /cue/fader position
    -
    where position is a float from 0.0 to 1.0 that shows the - fader position for the selected aux bus.
    -
    /cue/mute state
    -
    where state is a float of 0.0 or 1.0 that shows the state - of the mute for the selected aux bus.
    -
    /cue/signal activity
    -
    where activity is a float of 0.0 or 1.0 that shows audio - activity for the selected aux bus.
    -
    /cue/send/name/id name
    -
    where name is a string that is the name of the channel - that send id belongs to.
    -
    /cue/send/fader/id position
    -
    where position is a float from 0.0 to 1.0 that is the position - for the fader for the send that id belongs to.
    -
    /cue/send/enable/id state
    -
    where state is a float of 0.0 or 1.0 that is the state - of the enable for the send that id belongs to.
    -
    + + + + + + + + + + + + + + + + + +
    /cue/name namewhere name is a string that is the name of the currently + selected aux bus.
    /cue/name/id namewhere name is a string that is the name of the aux bus + that id belongs to.
    /cue/fader positionwhere position is a float from 0.0 to 1.0 that shows the + fader position for the selected aux bus.
    /cue/mute statewhere state is a float of 0.0 or 1.0 that shows the state + of the mute for the selected aux bus.
    /cue/signal activitywhere activity is a float of 0.0 or 1.0 that shows audio + activity for the selected aux bus.
    /cue/send/name/id namewhere name is a string that is the name of the channel + that send id belongs to.
    /cue/send/fader/id positionwhere position is a float from 0.0 to 1.0 that is the position + for the fader for the send that id belongs to.
    /cue/send/enable/id statewhere state is a float of 0.0 or 1.0 that is the state + of the enable for the send that id belongs to.

    While a fader is being adjusted, the corresponding /*/name text will give the level in db.