+ 
+ Personal monitoring can allow a performer with a smart phone to set - their personal monitor mix for a floor wedge or inear monitoring. + their personal monitor mix for a floor wedge or in-ear monitoring. In Ardour 5.6 OSC commands to allow this were added.
+ Most phone OSC applets (TouchOSC, Control) require manual port to be set. + There are certainly more controls than needed. Using send enables for + example, may lead to wasted time discovering why a send has no sound. + A good easy to use controller that fits on most phones while still + being controllable even with big fingers might look like: +
+|
+
+ |
+
+
+ |
+
+ Ardour is not limited to talking to one personal monitor controller + at a time, but is able to deal with many simultaneously, each controlling + it's own Aux bus. +
The send controls and feedback all have the send id (1 to n) in line as part of the OSC path. So the path for the second send would be @@ -53,56 +84,55 @@ most surfaces used for this will only be able to handle one parameter.
| /cue/connect | +Returns a list of aux busses and connects to the first. |
|---|---|
| /cue/aux aux-number | +where aux-number is an integer or float which is the aux bus + number this surface will use. |
| /cue/next_aux | +Sets the the aux bus to one bus higher. |
| /cue/previous_aux | +Sets the aux to one bus lower. This can also be used as a "connect" + button to save space in a phone layout. |
| /cue/fader position | +where position is a float for the position of the fader + between 0.0 and 1.0. |
| /cue/mute state | +where state is a float of 0.0 for mute off and 1.0 for the Aux bus mute on. |
| /cue/send/fader/id position | +where position is a float for the position of the fader + between 0.0 and 1.0. |
| /cue/send/enable/id state | +where state is a float of 0.0 for disable and 1.0 for enable. |
| /cue/name name | +where name is a string that is the name of the currently + selected aux bus. |
|---|---|
| /cue/name/id name | +where name is a string that is the name of the aux bus + that id belongs to. |
| /cue/fader position | +where position is a float from 0.0 to 1.0 that shows the + fader position for the selected aux bus. |
| /cue/mute state | +where state is a float of 0.0 or 1.0 that shows the state + of the mute for the selected aux bus. |
| /cue/signal activity | +where activity is a float of 0.0 or 1.0 that shows audio + activity for the selected aux bus. |
| /cue/send/name/id name | +where name is a string that is the name of the channel + that send id belongs to. |
| /cue/send/fader/id position | +where position is a float from 0.0 to 1.0 that is the position + for the fader for the send that id belongs to. |
| /cue/send/enable/id state | +where state is a float of 0.0 or 1.0 that is the state + of the enable for the send that id belongs to. |
While a fader is being adjusted, the corresponding /*/name text will give the level in db.