X-Git-Url: http://shamusworld.gotdns.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=include%2Fmuting-and-soloing.html;h=f2ee084885d6573bc73ebd7fc29a89601c2e8d14;hb=f77cf8ad16a6d89f8fd3c8a0751edfa2da829495;hp=5b685379993b018650a38f8b7216ba16a6a32fbe;hpb=081e7af0b6f6dec0ca685d3a538eacf20394c2cc;p=ardour-manual

diff --git a/include/muting-and-soloing.html b/include/muting-and-soloing.html
index 5b68537..f2ee084 100644
--- a/include/muting-and-soloing.html
+++ b/include/muting-and-soloing.html
@@ -8,12 +8,12 @@
 
 <h2>Without a monitor bus</h2>
 <p>
-  If you are using Ardour without a monitor bus, there is only one way
+  When using Ardour without a monitor bus, there is only one way
   in which mute and solo will work:</p>
 <ul>
   <li>
     Mute on a track or bus will mute that track on the master bus,
-     so that it will not be heard.
+    so that it will not be heard.
   </li>
   <li>
     Solo on a track or bus will solo that track or bus and mute all
@@ -24,10 +24,10 @@
 
 <h2>With a monitor bus</h2>
 <p>
-  For setups with a monitor bus, you have more options, mostly
+  For setups with a monitor bus, more options are available, mostly
   governed by the setting of the
   <kbd class="option">Solo controls are Listen controls</kbd> option
-  in <kbd class="menu">Edit &gt; Preferences &gt; Solo / mute.
+  in <kbd class="menu">Edit &gt; Preferences &gt; Mixer.</kbd>
 </p>
 <p>
   With <kbd class="optoff">Solo controls are Listen controls</kbd>
@@ -36,12 +36,13 @@
   bus is fed from the master bus, so it sees the same thing.
 </p>
 <p>
-  With <kbc class="option">Solo controls are Listen controls</kbd>
+  With <kbd class="option">Solo controls are Listen controls</kbd>
   ticked, the master and monitor busses behave differently. In this
   mode, solo controls are more properly called <dfn>listen</dfn>
   controls, and Ardour's solo buttons will change their legend from
-  <samp>S</samp> to either <samp>A</samp> or <samp>P</samp> to
-  reflect this.
+  <kbd class="menu">S</kbd> for Solo to show the listening point,
+  either <kbd class="menu">A</kbd> for After fader or
+  <kbd class="menu">P</kbd> for Pre fader.
 </p>
 <p>
   Now, without any mute or listen, the monitor bus remains fed by
@@ -69,7 +70,12 @@
 <p>
   The solo-mute arrangement with a monitor bus is shown below:
 </p>
-<img src="/images/solo-mute.png" alt="mute/solo signal flow" />
+
+<figure class="center">
+  <img src="/images/solo-mute.png" alt="mute/solo signal flow">
+  <figcaption>Mute/solo signal flow</figcaption>
+</figure>
+
 <p>
   Here we have a number of tracks or busses (in orange). Each one has an
   output which feeds the master bus. In addition, each has PFL and AFL
@@ -80,12 +86,12 @@
 </p>
 <p>
   In this scheme Solo has no effect other than to mute other non-soloed tracks;
-  with solo (rather then listen), the monitor out is fed from the master bus.
+  with solo (rather than listen), the monitor out is fed from the master bus.
 </p>
 
 <h2>Other solo options</h2>
 <p>
-  <kbd class="menu">Edit &gt; Preferences &gt;  Solo / Mute</kbd> has some
+  <kbd class="menu">Edit &gt; Preferences &gt;  Mixer</kbd> has some
   more solo options:
 </p>
 
@@ -94,37 +100,40 @@
   When using solo-in-place (SiP), in other words when soloed tracks are being
   listened to on the master bus, this fader specifies the gain that will be
   applied to other tracks in order to mute them. Setting this level to
-  -&infin;&nbsp;dB will mean that other tracks will not be heard at all; setting to
-  some higher value less than 0dB means that other non-soloed tracks will be h
-  eard, just reduced in volume compared to the soloed tracks. Using a value
-  larger than -&infin;&nbsp;dB is sometimes called "Solo-In-Front" by other DAWs, because
+  &minus;&infin;&nbsp;dB will mean that other tracks will not be heard at all; setting to
+  some higher value less than 0dB means that other non-soloed tracks will be heard, just
+  reduced in volume compared to the soloed tracks. Using a value
+  larger than &minus;&infin;&nbsp;dB is sometimes called "Solo-In-Front" by other DAWs, because
   the listener has the sense that soloed material is "in front" of other
   material. In Ardour, this is not a distinct mode, but instead the mute cut
-  control offers any level of "in-front-ness" that you might want to use.
+  control offers any level of "in-front-ness" that is desired.
 </p>
+
 <h3>Exclusive solo</h3>
 <p>
   If this is enabled, only one track or bus will ever be soloed at once; soloing
   track B while track A is currently soloed will un-solo track A before soloing
   track B.
 </p>
+
 <h3>Show solo muting</h3>
 <p>
   If this is enabled, the mute button of tracks and busses will be drawn
   outlined to indicate that the track or bus is muted because something else
-  is soloed. This is enabled by default, and we recommend that you leave it
-  that way unless you are extremely comfortable with Ardour's mute/solo
+  is soloed. This is enabled by default, and it is recommended to leave it
+  that way unless extremely comfortable with Ardour's mute/solo
   behaviour.
 </p>
+
 <h3>Soloing overrides muting</h3>
 <p>
   If this is enabled, a track or bus that is both soloed and muted will behave
   as if it is soloed.
 </p>
-<h3>Mute affects…</h3>
+
+<h3>Mute affects&hellip;</h3>
 <p>
   These options dictate whether muting the track will affect various routes out
   of the track; through the sends, through the control outputs (to the monitor
   bus) and to the main outputs.
 </p>
-