+++ /dev/null
-/******************************************************************************
-**
-** Module Name: wnaspi32.h
-**
-** Description: Header file for ASPI for Win32. This header includes
-** macro and type declarations, and can be included without
-** modification when using Borland C++ or Microsoft Visual
-** C++ with 32-bit compilation. If you are using a different
-** compiler then you MUST ensure that structures are packed
-** onto byte alignments, and that C++ name mangling is turned
-** off.
-**
-** Notes: This file created using 4 spaces per tab.
-**
-******************************************************************************/
-
-#ifndef __WNASPI32_H__
-#define __WNASPI32_H__
-
-// Make sure structures are packed and undecorated.
-
-#ifdef __BORLANDC__
-#pragma option -a1
-#endif //__BORLANDC__
-
-#ifdef _MSC_VER
-#pragma pack(1)
-#endif //__MSC_VER
-
-#ifdef __GCCWIN32__
-#pragma pack(1)
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif //__cplusplus
-
-//*****************************************************************************
-// %%% SCSI MISCELLANEOUS EQUATES %%%
-//*****************************************************************************
-
-#define SENSE_LEN 14 // Default sense buffer length
-#define SRB_DIR_SCSI 0x00 // Direction determined by SCSI
-#define SRB_POSTING 0x01 // Enable ASPI posting
-#define SRB_ENABLE_RESIDUAL_COUNT 0x04 // Enable residual byte count reporting
-#define SRB_DIR_IN 0x08 // Transfer from SCSI target to host
-#define SRB_DIR_OUT 0x10 // Transfer from host to SCSI target
-#define SRB_EVENT_NOTIFY 0x40 // Enable ASPI event notification
-
-#define RESIDUAL_COUNT_SUPPORTED 0x02 // Extended buffer flag
-#define MAX_SRB_TIMEOUT 108000lu // 30 hour maximum timeout in s
-#define DEFAULT_SRB_TIMEOUT 108000lu // Max timeout by default
-
-
-//*****************************************************************************
-// %%% ASPI Command Definitions %%%
-//*****************************************************************************
-
-#define SC_HA_INQUIRY 0x00 // Host adapter inquiry
-#define SC_GET_DEV_TYPE 0x01 // Get device type
-#define SC_EXEC_SCSI_CMD 0x02 // Execute SCSI command
-#define SC_ABORT_SRB 0x03 // Abort an SRB
-#define SC_RESET_DEV 0x04 // SCSI bus device reset
-#define SC_SET_HA_PARMS 0x05 // Set HA parameters
-#define SC_GET_DISK_INFO 0x06 // Get Disk information
-#define SC_RESCAN_SCSI_BUS 0x07 // ReBuild SCSI device map
-#define SC_GETSET_TIMEOUTS 0x08 // Get/Set target timeouts
-
-//*****************************************************************************
-// %%% SRB Status %%%
-//*****************************************************************************
-
-#define SS_PENDING 0x00 // SRB being processed
-#define SS_COMP 0x01 // SRB completed without error
-#define SS_ABORTED 0x02 // SRB aborted
-#define SS_ABORT_FAIL 0x03 // Unable to abort SRB
-#define SS_ERR 0x04 // SRB completed with error
-
-#define SS_INVALID_CMD 0x80 // Invalid ASPI command
-#define SS_INVALID_HA 0x81 // Invalid host adapter number
-#define SS_NO_DEVICE 0x82 // SCSI device not installed
-
-#define SS_INVALID_SRB 0xE0 // Invalid parameter set in SRB
-#define SS_OLD_MANAGER 0xE1 // ASPI manager doesn't support Windows
-#define SS_BUFFER_ALIGN 0xE1 // Buffer not aligned (replaces OLD_MANAGER in Win32)
-#define SS_ILLEGAL_MODE 0xE2 // Unsupported Windows mode
-#define SS_NO_ASPI 0xE3 // No ASPI managers resident
-#define SS_FAILED_INIT 0xE4 // ASPI for windows failed init
-#define SS_ASPI_IS_BUSY 0xE5 // No resources available to execute cmd
-#define SS_BUFFER_TOO_BIG 0xE6 // Buffer size too big to handle!
-#define SS_MISMATCHED_COMPONENTS 0xE7 // The DLLs/EXEs of ASPI don't version check
-#define SS_NO_ADAPTERS 0xE8 // No host adapters to manage
-#define SS_INSUFFICIENT_RESOURCES 0xE9 // Couldn't allocate resources needed to init
-#define SS_ASPI_IS_SHUTDOWN 0xEA // Call came to ASPI after PROCESS_DETACH
-#define SS_BAD_INSTALL 0xEB // The DLL or other components are installed wrong
-
-//*****************************************************************************
-// %%% Host Adapter Status %%%
-//*****************************************************************************
-
-#define HASTAT_OK 0x00 // Host adapter did not detect an // error
-#define HASTAT_SEL_TO 0x11 // Selection Timeout
-#define HASTAT_DO_DU 0x12 // Data overrun data underrun
-#define HASTAT_BUS_FREE 0x13 // Unexpected bus free
-#define HASTAT_PHASE_ERR 0x14 // Target bus phase sequence // failure
-#define HASTAT_TIMEOUT 0x09 // Timed out while SRB was waiting to beprocessed.
-#define HASTAT_COMMAND_TIMEOUT 0x0B // Adapter timed out processing SRB.
-#define HASTAT_MESSAGE_REJECT 0x0D // While processing SRB, the // adapter received a MESSAGE
-#define HASTAT_BUS_RESET 0x0E // A bus reset was detected.
-#define HASTAT_PARITY_ERROR 0x0F // A parity error was detected.
-#define HASTAT_REQUEST_SENSE_FAILED 0x10 // The adapter failed in issuing
-
-//*****************************************************************************
-// %%% SRB - HOST ADAPTER INQUIRY - SC_HA_INQUIRY (0) %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_HA_INQUIRY
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 ASPI request flags
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved, MUST = 0
- BYTE HA_Count; // 08/008 Number of host adapters present
- BYTE HA_SCSI_ID; // 09/009 SCSI ID of host adapter
- BYTE HA_ManagerId[16]; // 0A/010 String describing the manager
- BYTE HA_Identifier[16]; // 1A/026 String describing the host adapter
- BYTE HA_Unique[16]; // 2A/042 Host Adapter Unique parameters
- WORD HA_Rsvd1; // 3A/058 Reserved, MUST = 0
-}
-SRB_HAInquiry, *PSRB_HAInquiry, FAR *LPSRB_HAInquiry;
-
-//*****************************************************************************
-// %%% SRB - GET DEVICE TYPE - SC_GET_DEV_TYPE (1) %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_GET_DEV_TYPE
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 Reserved, MUST = 0
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved, MUST = 0
- BYTE SRB_Target; // 08/008 Target's SCSI ID
- BYTE SRB_Lun; // 09/009 Target's LUN number
- BYTE SRB_DeviceType; // 0A/010 Target's peripheral device type
- BYTE SRB_Rsvd1; // 0B/011 Reserved, MUST = 0
-}
-SRB_GDEVBlock, *PSRB_GDEVBlock, FAR *LPSRB_GDEVBlock;
-
-//*****************************************************************************
-// %%% SRB - EXECUTE SCSI COMMAND - SC_EXEC_SCSI_CMD (2) %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_EXEC_SCSI_CMD
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 ASPI request flags
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved
- BYTE SRB_Target; // 08/008 Target's SCSI ID
- BYTE SRB_Lun; // 09/009 Target's LUN number
- WORD SRB_Rsvd1; // 0A/010 Reserved for Alignment
- DWORD SRB_BufLen; // 0C/012 Data Allocation Length
- BYTE FAR *SRB_BufPointer; // 10/016 Data Buffer Pointer
- BYTE SRB_SenseLen; // 14/020 Sense Allocation Length
- BYTE SRB_CDBLen; // 15/021 CDB Length
- BYTE SRB_HaStat; // 16/022 Host Adapter Status
- BYTE SRB_TargStat; // 17/023 Target Status
- VOID FAR *SRB_PostProc; // 18/024 Post routine
- BYTE SRB_Rsvd2[20]; // 1C/028 Reserved, MUST = 0
- BYTE CDBByte[16]; // 30/048 SCSI CDB
- BYTE SenseArea[SENSE_LEN+2]; // 50/064 Request Sense buffer
-}
-SRB_ExecSCSICmd, *PSRB_ExecSCSICmd, FAR *LPSRB_ExecSCSICmd;
-
-//*****************************************************************************
-// %%% SRB - ABORT AN SRB - SC_ABORT_SRB (3) %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_ABORT_SRB
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 Reserved
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved
- VOID FAR *SRB_ToAbort; // 08/008 Pointer to SRB to abort
-}
-SRB_Abort, *PSRB_Abort, FAR *LPSRB_Abort;
-
-//*****************************************************************************
-// %%% SRB - BUS DEVICE RESET - SC_RESET_DEV (4) %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_RESET_DEV
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 ASPI request flags
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved
- BYTE SRB_Target; // 08/008 Target's SCSI ID
- BYTE SRB_Lun; // 09/009 Target's LUN number
- BYTE SRB_Rsvd1[12]; // 0A/010 Reserved for Alignment
- BYTE SRB_HaStat; // 16/022 Host Adapter Status
- BYTE SRB_TargStat; // 17/023 Target Status
- VOID FAR *SRB_PostProc; // 18/024 Post routine
- BYTE SRB_Rsvd2[36]; // 1C/028 Reserved, MUST = 0
-}
-SRB_BusDeviceReset, *PSRB_BusDeviceReset, FAR *LPSRB_BusDeviceReset;
-
-//*****************************************************************************
-// %%% SRB - GET DISK INFORMATION - SC_GET_DISK_INFO %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_GET_DISK_INFO
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 Reserved, MUST = 0
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved, MUST = 0
- BYTE SRB_Target; // 08/008 Target's SCSI ID
- BYTE SRB_Lun; // 09/009 Target's LUN number
- BYTE SRB_DriveFlags; // 0A/010 Driver flags
- BYTE SRB_Int13HDriveInfo; // 0B/011 Host Adapter Status
- BYTE SRB_Heads; // 0C/012 Preferred number of heads translation
- BYTE SRB_Sectors; // 0D/013 Preferred number of sectors translation
- BYTE SRB_Rsvd1[10]; // 0E/014 Reserved, MUST = 0
-}
-SRB_GetDiskInfo, *PSRB_GetDiskInfo, FAR *LPSRB_GetDiskInfo;
-
-//*****************************************************************************
-// %%% SRB - RESCAN SCSI BUS(ES) ON SCSIPORT %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_RESCAN_SCSI_BUS
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 Reserved, MUST = 0
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved, MUST = 0
-}
-SRB_RescanPort, *PSRB_RescanPort, FAR *LPSRB_RescanPort;
-
-//*****************************************************************************
-// %%% SRB - GET/SET TARGET TIMEOUTS %%%
-//*****************************************************************************
-
-typedef struct // Offset
-{ // HX/DEC
- BYTE SRB_Cmd; // 00/000 ASPI command code = SC_GETSET_TIMEOUTS
- BYTE SRB_Status; // 01/001 ASPI command status byte
- BYTE SRB_HaId; // 02/002 ASPI host adapter number
- BYTE SRB_Flags; // 03/003 ASPI request flags
- DWORD SRB_Hdr_Rsvd; // 04/004 Reserved, MUST = 0
- BYTE SRB_Target; // 08/008 Target's SCSI ID
- BYTE SRB_Lun; // 09/009 Target's LUN number
- DWORD SRB_Timeout; // 0A/010 Timeout in half seconds
-}
-SRB_GetSetTimeouts, *PSRB_GetSetTimeouts, FAR *LPSRB_GetSetTimeouts;
-
-//*****************************************************************************
-// %%% ASPIBUFF - Structure For Controllng I/O Buffers %%%
-//*****************************************************************************
-
-typedef struct tag_ASPI32BUFF // Offset
-{ // HX/DEC
- PBYTE AB_BufPointer; // 00/000 Pointer to the ASPI allocated buffer
- DWORD AB_BufLen; // 04/004 Length in bytes of the buffer
- DWORD AB_ZeroFill; // 08/008 Flag set to 1 if buffer should be zeroed
- DWORD AB_Reserved; // 0C/012 Reserved
-}
-ASPI32BUFF, *PASPI32BUFF, FAR *LPASPI32BUFF;
-
-//*****************************************************************************
-// %%% PROTOTYPES - User Callable ASPI for Win32 Functions %%%
-//*****************************************************************************
-
-typedef void *LPSRB;
-
-#if defined(__BORLANDC__)
-
-DWORD _import GetASPI32SupportInfo( void );
-DWORD _import SendASPI32Command( LPSRB );
-BOOL _import GetASPI32Buffer( PASPI32BUFF );
-BOOL _import FreeASPI32Buffer( PASPI32BUFF );
-BOOL _import TranslateASPI32Address( PDWORD, PDWORD );
-
-#elif defined(_MSC_VER)
-
-__declspec(dllimport) DWORD GetASPI32SupportInfo( void );
-__declspec(dllimport) DWORD SendASPI32Command( LPSRB );
-__declspec(dllimport) BOOL GetASPI32Buffer( PASPI32BUFF );
-__declspec(dllimport) BOOL FreeASPI32Buffer( PASPI32BUFF );
-__declspec(dllimport) BOOL TranslateASPI32Address( PDWORD, PDWORD );
-
-#else
-
-extern DWORD GetASPI32SupportInfo( void );
-extern DWORD GetASPI32Command( LPSRB );
-extern BOOL GetASPI32Buffer( PASPI32BUFF );
-extern BOOL FreeASPI32Buffer( PASPI32BUFF );
-extern BOOL TranslateASPI32Address( PDWORD, PDWORD );
-
-#endif
-
-// Restore compiler default packing and close off the C declarations.
-
-#ifdef __BORLANDC__
-#pragma option -a.
-#endif //__BORLANDC__
-
-#ifdef _MSC_VER
-#pragma pack()
-#endif //_MSC_VER
-
-#ifdef __GCCWIN32__
-#pragma pack()
-#endif
-
-#ifdef __cplusplus
-}
-#endif //__cplusplus
-
-#endif //__WNASPI32_H__
projects / virtualjaguar / blobdiff