+//
// layerwidget.cpp: Layer add/remove/use widget
//
// Part of the Architektonas Project
#include "global.h"
#include "layeritemwidget.h"
-
LayerWidget::LayerWidget(void): QWidget(),
addLayer(new QToolButton), removeLayer(new QToolButton),
editLayer(new QToolButton), layerUp(new QToolButton),
layerDown(new QToolButton), list(new QListWidget)
{
- LayerItemWidget * liw = new LayerItemWidget("Background");
QListWidgetItem * qlwi = new QListWidgetItem(list);
+ LayerItemWidget * liw = new LayerItemWidget("Background", false, false, qlwi);
list->setItemWidget(qlwi, liw);
-// QToolButton * pb1 = new QToolButton;
-// QToolButton * pb2 = new QToolButton;
-// QToolButton * pb3 = new QToolButton;
-// QToolButton * pb4 = new QToolButton;
-// QToolButton * pb5 = new QToolButton;
-
addLayer->setIcon(QIcon(":/res/layer-add.png"));
removeLayer->setIcon(QIcon(":/res/layer-delete.png"));
editLayer->setIcon(QIcon(":/res/layer-edit.png"));
setLayout(mainLayout);
connect(list, SIGNAL(currentRowChanged(int)), this, SLOT(HandleLayerSelected(int)));
+ connect(list, SIGNAL(itemDoubleClicked(QListWidgetItem *)), this, SLOT(HandleDblClick(QListWidgetItem *)));
connect(addLayer, SIGNAL(clicked()), this, SLOT(AddLayer()));
connect(removeLayer, SIGNAL(clicked()), this, SLOT(DeleteLayer()));
connect(editLayer, SIGNAL(clicked()), this, SLOT(EditLayer()));
connect(layerUp, SIGNAL(clicked()), this, SLOT(MoveLayerUp()));
connect(layerDown, SIGNAL(clicked()), this, SLOT(MoveLayerDown()));
+ connect(liw, SIGNAL(HideToggled(QListWidgetItem *, bool)), this, SLOT(HandleHideToggle(QListWidgetItem *, bool)));
+ connect(liw, SIGNAL(LockToggled(QListWidgetItem *, bool)), this, SLOT(HandleLockToggle(QListWidgetItem *, bool)));
+
list->setCurrentRow(0);
-}
+ // We set global variables here, since we are 'in charge' of them (mostly)
+ Global::activeLayer = 0;
+ Global::numLayers = 1;
+ Global::layerHidden.clear();
+ Global::layerLocked.clear();
+ Global::layerName.clear();
+ Global::layerHidden.push_back(false);
+ Global::layerLocked.push_back(false);
+ Global::layerName.push_back("Background");
+}
LayerWidget::~LayerWidget()
{
}
+void LayerWidget::Reload(void)
+{
+ list->clear();
+
+ for(int i=0; i<Global::numLayers; i++)
+ {
+ QListWidgetItem * qlwi = new QListWidgetItem();
+ LayerItemWidget * liw = new LayerItemWidget(Global::layerName[i].c_str(), Global::layerHidden[i], Global::layerLocked[i], qlwi);
+ list->insertItem(0, qlwi);
+ list->setItemWidget(qlwi, liw);
+
+ // Set up SIGNAL/SLOTs for this LayerItemWidget
+ connect(liw, SIGNAL(HideToggled(QListWidgetItem *, bool)), this, SLOT(HandleHideToggle(QListWidgetItem *, bool)));
+ connect(liw, SIGNAL(LockToggled(QListWidgetItem *, bool)), this, SLOT(HandleLockToggle(QListWidgetItem *, bool)));
+ }
+
+ int layer = (Global::numLayers - Global::activeLayer) - 1;
+ list->setCurrentRow(layer, QItemSelectionModel::SelectCurrent);
+ SetButtonStates();
+}
void LayerWidget::HandleLayerSelected(int currentRow)
{
-//printf("LayerWidget::HandleLayerSelected(): currentRow = %i\n", currentRow);
-// emit(LayerSelected(currentRow));
+ // If LayerWidget is empty, bail out
+ if (currentRow == -1)
+ return;
- QListWidgetItem * qlwi = list->item(currentRow);
- LayerItemWidget * li = (LayerItemWidget *)list->itemWidget(qlwi);
- Global::activeLayer = currentRow;
- Global::layerIsLocked = li->editibility->isChecked();
+ // This is numbered opposite of how it's presented. In other words, the
+ // bottom of the list is 0, and items above it count upwards. So like this:
+ //
+ // (2) Layer #2
+ // (1) Layer #1
+ // (0) Background
+ //
+ // which is the opposite of the internal numbering.
+ Global::activeLayer = (Global::numLayers - currentRow) - 1;
// Set button states to sane values
SetButtonStates();
}
+//
+// What happens here is that for every QListWidgetItem we make, we connect it
+// to these handlers. But we only have to worry about that when adding and
+// moving a layer. However, when toggling states, we need to toggle the global
+// state variables too.
+//
+void LayerWidget::HandleHideToggle(QListWidgetItem * qlwi, bool state)
+{
+ int currentRow = list->row(qlwi);
+ int layer = (Global::numLayers - currentRow) - 1;
+ std::vector<bool>::iterator i = Global::layerHidden.begin() + layer;
+ (*i) = state;
+//printf("Item #%i, new hide state is %s\n", currentRow, (state ? "ON" : "off"));
+//printf("LayerWidget: New hide state of layer %i is %s.\n", layer, (state ? "ON" : "off"));
+ // We do this last, because otherwise the Document would get the wrong state
+ emit LayerToggled();
+}
+
+void LayerWidget::HandleLockToggle(QListWidgetItem * qlwi, bool state)
+{
+ int currentRow = list->row(qlwi);
+ int layer = (Global::numLayers - currentRow) - 1;
+ std::vector<bool>::iterator i = Global::layerLocked.begin() + layer;
+ (*i) = state;
+// printf("Item #%i, new lock state is %s\n", list->row(qlwi), (state ? "ON" : "off"));
+}
+
+void LayerWidget::HandleDblClick(QListWidgetItem * /*qlwi*/)
+{
+ EditLayer();
+}
void LayerWidget::AddLayer(void)
{
+ // We always stick the newest layer at the top of the list (visually, the
+ // top of the list is the end, the bottom is the beginning)...
int count = list->count();
QString text = QString("Layer #%1").arg(count);
- LayerItemWidget * liw = new LayerItemWidget(text);
QListWidgetItem * qlwi = new QListWidgetItem();
+ LayerItemWidget * liw = new LayerItemWidget(text, false, false, qlwi);
list->insertItem(0, qlwi);
list->setItemWidget(qlwi, liw);
+ // Set up SIGNAL/SLOTs for this LayerItemWidget
+ connect(liw, SIGNAL(HideToggled(QListWidgetItem *, bool)), this, SLOT(HandleHideToggle(QListWidgetItem *, bool)));
+ connect(liw, SIGNAL(LockToggled(QListWidgetItem *, bool)), this, SLOT(HandleLockToggle(QListWidgetItem *, bool)));
+
SetButtonStates();
-}
+ // Fix up the global state
+ Global::layerHidden.push_back(false);
+ Global::layerLocked.push_back(false);
+ Global::layerName.push_back(text.toUtf8().data());
+ Global::numLayers++;
+}
void LayerWidget::DeleteLayer(void)
{
if (numItems == 1)
return;
+ // N.B.: This *must* go before the item removal because that causes
+ // HandleLayerSelected() to be fired off which causes the numbers to
+ // be off. You have been warned!
+ // Tell the DrawingView to delete this layer in its Container:
+ emit LayerDeleted(Global::activeLayer);
+
+ int currentRow = list->currentRow();
QListWidgetItem * qlwi = list->currentItem();
list->removeItemWidget(qlwi);
delete qlwi;
SetButtonStates();
- // N.B.: Also, we need to delete the layer in the Drawing as well!
+ // Fix up the global state
+ int layer = (Global::numLayers - currentRow) - 1;
+ Global::layerHidden.erase(Global::layerHidden.begin() + layer);
+ Global::layerLocked.erase(Global::layerLocked.begin() + layer);
+ Global::layerName.erase(Global::layerName.begin() + layer);
+ Global::numLayers--;
+
+ // If we're deleting from the top of the list, we have to decrement the
+ // active layer # by 1 (since we count upward from the bottom of the list).
+ if (currentRow == 0)
+ Global::activeLayer--;
}
-
void LayerWidget::EditLayer(void)
{
// Get the LayerItemWidget so we can edit it (its name, anyway)...
QString result = QInputDialog::getText(this, tr("Edit Layer Name"), tr("Layer Name:"), QLineEdit::Normal, s, &ok);
if (ok && !result.isEmpty())
+ {
li->name->setText(result);
-}
+ // We don't reverse the layer # here, like elsewhere, because we're
+ // using the layer # directly instead of having to translate it from
+ // the widget.
+ std::vector<std::string>::iterator i = Global::layerName.begin() + Global::activeLayer;
+ (*i) = result.toUtf8().data();
+ }
+}
void LayerWidget::MoveLayerUp(void)
{
QListWidgetItem * qlwi = list->currentItem();
LayerItemWidget * li = (LayerItemWidget *)list->itemWidget(qlwi);
QString s = li->name->text();
- bool visible = li->visibility->isChecked();
- bool editible = li->editibility->isChecked();
+ bool visible = li->invisible->isChecked();
+ bool editible = li->locked->isChecked();
// We have to make a new LayerItemWidget because it destroys the old one!
list->takeItem(currentRow);
list->insertItem(currentRow - 1, qlwi);
- li = new LayerItemWidget(s, visible, editible);
+ li = new LayerItemWidget(s, visible, editible, qlwi);
list->setItemWidget(qlwi, li);
list->setCurrentItem(qlwi);
-}
+ // Set up SIGNAL/SLOTs for this LayerItemWidget
+ connect(li, SIGNAL(HideToggled(QListWidgetItem *, bool)), this, SLOT(HandleHideToggle(QListWidgetItem *, bool)));
+ connect(li, SIGNAL(LockToggled(QListWidgetItem *, bool)), this, SLOT(HandleLockToggle(QListWidgetItem *, bool)));
+
+ // Fix up the global state...
+ // N.B.: Because we handle the button states correctly, we should never
+ // have a situation where the reference in the vector is bad.
+ int layer = (Global::numLayers - currentRow) - 1;
+ bool old = Global::layerHidden[layer];
+ Global::layerHidden[layer] = Global::layerHidden[layer + 1];
+ Global::layerHidden[layer + 1] = old;
+ old = Global::layerLocked[layer];
+ Global::layerLocked[layer] = Global::layerLocked[layer + 1];
+ Global::layerLocked[layer + 1] = old;
+ std::string oldStr = Global::layerName[layer];
+ Global::layerName[layer] = Global::layerName[layer + 1];
+ Global::layerName[layer + 1] = oldStr;
+ // We also have to tell the document to shuffle its layers too
+ emit LayersSwapped(layer, layer + 1);
+}
void LayerWidget::MoveLayerDown(void)
{
QListWidgetItem * qlwi = list->currentItem();
LayerItemWidget * li = (LayerItemWidget *)list->itemWidget(qlwi);
QString s = li->name->text();
- bool visible = li->visibility->isChecked();
- bool editible = li->editibility->isChecked();
+ bool visible = li->invisible->isChecked();
+ bool editible = li->locked->isChecked();
// We have to make a new LayerItemWidget because it destroys the old one!
list->takeItem(currentRow);
list->insertItem(currentRow + 1, qlwi);
- li = new LayerItemWidget(s, visible, editible);
+ li = new LayerItemWidget(s, visible, editible, qlwi);
list->setItemWidget(qlwi, li);
list->setCurrentItem(qlwi);
-}
+ // Set up SIGNAL/SLOTs for this LayerItemWidget
+ connect(li, SIGNAL(HideToggled(QListWidgetItem *, bool)), this, SLOT(HandleHideToggle(QListWidgetItem *, bool)));
+ connect(li, SIGNAL(LockToggled(QListWidgetItem *, bool)), this, SLOT(HandleLockToggle(QListWidgetItem *, bool)));
+
+ // Fix up the global state...
+ // N.B.: Because we handle the button states correctly, we should never
+ // have a situation where the reference in the vector is bad.
+ int layer = (Global::numLayers - currentRow) - 1;
+ bool old = Global::layerHidden[layer];
+ Global::layerHidden[layer] = Global::layerHidden[layer - 1];
+ Global::layerHidden[layer - 1] = old;
+ old = Global::layerLocked[layer];
+ Global::layerLocked[layer] = Global::layerLocked[layer - 1];
+ Global::layerLocked[layer - 1] = old;
+ std::string oldStr = Global::layerName[layer];
+ Global::layerName[layer] = Global::layerName[layer - 1];
+ Global::layerName[layer - 1] = oldStr;
+ // We also have to tell the document to shuffle its layers too
+ emit LayersSwapped(layer, layer - 1);
+}
//
// Set button states in this widget to sane values
layerUp->setEnabled(currentRow == 0 ? false : true);
removeLayer->setEnabled(numItems == 1 ? false : true);
}
-
projects / architektonas / blobdiff