//#define JERRY_DEBUG
static uint8 * jerry_ram_8;
-//static uint16 *jerry_ram_16;
-//static uint8 * jerry_wave_rom;
-
-//#define JERRY_CONFIG jerry_ram_16[0x4002>>1]
#define JERRY_CONFIG 0x4002
uint8 analog_x, analog_y;
static int32 jerry_timer_2_counter;
static uint32 jerry_i2s_interrupt_divide = 8;
-static int32 jerry_i2s_interrupt_timer = -1;
-static int32 jerry_i2s_interrupt_cycles_per_scanline = 0;
-
+static int32 jerry_i2s_interrupt_timer = -1;
+uint32 jerryI2SCycles;
+uint32 jerryIntPending;
+//This approach is probably wrong, since the timer is continuously counting down, though
+//it might only be a problem if the # of interrupts generated is greater than 1--the M68K's
+//timeslice should be running during that phase... (The DSP needs to be aware of this!)
void jerry_i2s_exec(uint32 cycles)
{
+ extern uint16 serialMode; // From DAC.CPP
+ if (!(serialMode & 0x01)) // INTERNAL flag
+ return;
+
+ // Why is it called this? Instead of SCLK? Shouldn't this be read from DAC.CPP???
+//Yes, it should. !!! FIX !!!
jerry_i2s_interrupt_divide &= 0xFF;
if (jerry_i2s_interrupt_timer == -1)
{
- uint32 jerry_i2s_int_freq = (26591000 / 64) / (jerry_i2s_interrupt_divide + 1);
- jerry_i2s_interrupt_cycles_per_scanline = 13300000 / jerry_i2s_int_freq;
- jerry_i2s_interrupt_timer = jerry_i2s_interrupt_cycles_per_scanline;
- //fprintf(log_get(),"jerry: i2s interrupt rate set to %i hz (every %i cpu clock cycles) jerry_i2s_interrupt_divide=%i\n",jerry_i2s_int_freq,jerry_i2s_interrupt_cycles_per_scanline,jerry_i2s_interrupt_divide);
- pcm_set_sample_rate(jerry_i2s_int_freq);
+ // We don't have to divide the RISC clock rate by this--the reason is a bit
+ // convoluted. Will put explanation here later...
+// What's needed here is to find the ratio of the frequency to the number of clock cycles
+// in one second. For example, if the sample rate is 44100, we divide the clock rate by
+// this: 26590906 / 44100 = 602 cycles.
+// Which means, every 602 cycles that go by we have to generate an interrupt.
+ jerryI2SCycles = 32 * (2 * (jerry_i2s_interrupt_divide + 1));
}
+
jerry_i2s_interrupt_timer -= cycles;
- // note : commented since the sound doesn't work properly else
- if (1)//jerry_i2s_interrupt_timer<=0)
+ if (jerry_i2s_interrupt_timer <= 0)
{
- // i2s interrupt
- dsp_check_if_i2s_interrupt_needed();
- //fprintf(log_get(),"jerry_i2s_interrupt_timer=%i, generating an i2s interrupt\n",jerry_i2s_interrupt_timer);
- jerry_i2s_interrupt_timer += jerry_i2s_interrupt_cycles_per_scanline;
+ DSPSetIRQLine(DSPIRQ_SSI, ASSERT_LINE);
+ jerry_i2s_interrupt_timer += jerryI2SCycles;
+ if (jerry_i2s_interrupt_timer < 0)
+ WriteLog("JERRY: Missed generating an interrupt (missed %u)!\n", (-jerry_i2s_interrupt_timer / jerryI2SCycles) + 1);
}
}
void jerry_reset_i2s_timer(void)
{
- //fprintf(log_get(),"i2s: reseting\n");
+ //WriteLog("i2s: reseting\n");
+//This is really SCLK... !!! FIX !!!
jerry_i2s_interrupt_divide = 8;
jerry_i2s_interrupt_timer = -1;
}
jerry_timer_1_counter = (1 + jerry_timer_1_prescaler) * (1 + jerry_timer_1_divider);
// if (jerry_timer_1_counter)
-// fprintf(log_get(),"jerry: reseting timer 1 to 0x%.8x (%i)\n",jerry_timer_1_counter,jerry_timer_1_counter);
+// WriteLog("jerry: reseting timer 1 to 0x%.8x (%i)\n",jerry_timer_1_counter,jerry_timer_1_counter);
}
void jerry_reset_timer_2(void)
jerry_timer_2_counter = ((1 + jerry_timer_2_prescaler) * (1 + jerry_timer_2_divider));
// if (jerry_timer_2_counter)
-// fprintf(log_get(),"jerry: reseting timer 2 to 0x%.8x (%i)\n",jerry_timer_2_counter,jerry_timer_2_counter);
+// WriteLog("jerry: reseting timer 2 to 0x%.8x (%i)\n",jerry_timer_2_counter,jerry_timer_2_counter);
}
void jerry_pit_exec(uint32 cycles)
if (jerry_timer_1_counter <= 0)
{
- dsp_set_irq_line(2, 1);
+ DSPSetIRQLine(DSPIRQ_TIMER0, ASSERT_LINE);
jerry_reset_timer_1();
}
if (jerry_timer_2_counter <= 0)
{
- dsp_set_irq_line(3, 1);
+ DSPSetIRQLine(DSPIRQ_TIMER1, ASSERT_LINE);
jerry_reset_timer_2();
}
}
-void jerry_wave_rom_init(void)
-{
-// memory_malloc_secure((void **)&jerry_wave_rom, 0x1000, "jerry wave rom");
-// uint32 * jaguar_wave_rom_32 = (uint32 *)jerry_wave_rom;
-
- // use real wave table dump
-// JLH: Looks like this WT dump is in the wrong endian (For the Jaguar, that is)...
-// memcpy(jerry_wave_rom, wave_table, 0x1000);
-
- // reverse byte ordering
-// JLH: Actually, this does nothing...
-/* for(int i=0; i<0x400; i++)
- {
- uint32 data = jaguar_wave_rom_32[i];
- data = ((data & 0xFF000000) >> 24) | ((data & 0x0000FF00) << 8)
- | ((data & 0x00FF0000) >> 8) | ((data & 0x000000FF) << 24);
- }*/
-// Why the need for an extra buffer to hold it, when it already exists in the form of wave_table???
-// Also, there was a memory leak, since it was never deallocated... (jerry_wave_rom)
-
- // Copy it to DSP RAM
-//WAS: memcpy(&jerry_ram_8[0xD000], jerry_wave_rom, 0x1000);
- memcpy(&jerry_ram_8[0xD000], wave_table, 0x1000);
-}
-
void jerry_init(void)
{
- //fprintf(log_get(),"jerry_init()\n");
clock_init();
anajoy_init();
joystick_init();
- eeprom_init();
- memory_malloc_secure((void **)&jerry_ram_8, 0x10000, "jerry ram");
-// jerry_ram_16 = (uint16 *)jerry_ram_8;
- jerry_wave_rom_init();
+ DACInit();
+//This should be handled with the cart initialization...
+// eeprom_init();
+ memory_malloc_secure((void **)&jerry_ram_8, 0x10000, "JERRY RAM/ROM");
+ memcpy(&jerry_ram_8[0xD000], wave_table, 0x1000);
}
void jerry_reset(void)
{
- //fprintf(log_get(),"jerry_reset()\n");
clock_reset();
anajoy_reset();
joystick_reset();
eeprom_reset();
jerry_reset_i2s_timer();
+ DACReset();
- memset(jerry_ram_8, 0x00, 0x10000);
- jerry_ram_8[JERRY_CONFIG+1] |= 0x10; // NTSC (bit 4)
+ memset(jerry_ram_8, 0x00, 0xD000); // Don't clear out the Wavetable ROM...!
jerry_timer_1_prescaler = 0xFFFF;
jerry_timer_2_prescaler = 0xFFFF;
jerry_timer_1_divider = 0xFFFF;
jerry_timer_2_divider = 0xFFFF;
jerry_timer_1_counter = 0;
jerry_timer_2_counter = 0;
-
}
void jerry_done(void)
{
- //fprintf(log_get(),"jerry_done()\n");
+ WriteLog("JERRY: M68K Interrupt control ($F10020) = %04X\n", GET16(jerry_ram_8, 0x20));
memory_free(jerry_ram_8);
clock_done();
anajoy_done();
joystick_done();
+ DACDone();
eeprom_done();
}
+bool JERRYIRQEnabled(int irq)
+{
+ // Read the word @ $F10020
+ return jerry_ram_8[0x21] & (1 << irq);
+}
+
+void JERRYSetPendingIRQ(int irq)
+{
+ // This is the shadow of INT (it's a split RO/WO register)
+ jerryIntPending |= (1 << irq);
+}
+
//
// JERRY byte access (read)
//
-
-unsigned jerry_byte_read(unsigned int offset)
+uint8 JERRYReadByte(uint32 offset, uint32 who/*=UNKNOWN*/)
{
#ifdef JERRY_DEBUG
- fprintf(log_get(),"jerry: reading byte at 0x%.6x\n",offset);
+ WriteLog("JERRY: Reading byte at %06X\n", offset);
#endif
- if ((offset >= dsp_control_ram_base) && (offset < dsp_control_ram_base+0x20))
- return dsp_byte_read(offset);
- else if ((offset >= dsp_work_ram_base) && (offset < dsp_work_ram_base+0x2000))
- return dsp_byte_read(offset);
- else if ((offset >= 0xF10000) && (offset <= 0xF10007))
+ if ((offset >= DSP_CONTROL_RAM_BASE) && (offset < DSP_CONTROL_RAM_BASE+0x20))
+ return DSPReadByte(offset, who);
+ else if ((offset >= DSP_WORK_RAM_BASE) && (offset < DSP_WORK_RAM_BASE+0x2000))
+ return DSPReadByte(offset, who);
+ else if (offset >= 0xF10000 && offset <= 0xF10007)
{
switch(offset & 0x07)
{
return jerry_timer_2_divider & 0xFF;
}
}
- else if ((offset >= 0xF10010) && (offset <= 0xf10015))
+ else if (offset >= 0xF10010 && offset <= 0xF10015)
return clock_byte_read(offset);
- else if ((offset >= 0xF17C00) && (offset <= 0xF17C01))
+ else if (offset >= 0xF17C00 && offset <= 0xF17C01)
return anajoy_byte_read(offset);
- else if ((offset >= 0xF14000) && (offset <= 0xF14003))
+ else if (offset >= 0xF14000 && offset <= 0xF14003)
{
return joystick_byte_read(offset) | eeprom_byte_read(offset);
}
- else if ((offset >= 0xF14000) && (offset <= 0xF1A0FF))
+ else if (offset >= 0xF14000 && offset <= 0xF1A0FF)
return eeprom_byte_read(offset);
return jerry_ram_8[offset & 0xFFFF];
//
// JERRY word access (read)
//
-
-unsigned jerry_word_read(unsigned int offset)
+uint16 JERRYReadWord(uint32 offset, uint32 who/*=UNKNOWN*/)
{
#ifdef JERRY_DEBUG
- fprintf(log_get(),"jerry: reading word at 0x%.6x\n",offset);
+ WriteLog("JERRY: Reading word at %06X\n", offset);
#endif
- if ((offset >= dsp_control_ram_base) && (offset < dsp_control_ram_base+0x20))
- return dsp_word_read(offset);
- else if ((offset >= dsp_work_ram_base) && (offset < dsp_work_ram_base+0x2000))
- return dsp_word_read(offset);
+ if ((offset >= DSP_CONTROL_RAM_BASE) && (offset < DSP_CONTROL_RAM_BASE+0x20))
+ return DSPReadWord(offset, who);
+ else if (offset >= DSP_WORK_RAM_BASE && offset <= DSP_WORK_RAM_BASE + 0x1FFF)
+ return DSPReadWord(offset, who);
else if ((offset >= 0xF10000) && (offset <= 0xF10007))
{
switch(offset & 0x07)
else if ((offset >= 0xF10010) && (offset <= 0xF10015))
return clock_word_read(offset);
else if (offset == 0xF10020)
- return 0x00;
+ return jerryIntPending;
else if ((offset >= 0xF17C00) && (offset <= 0xF17C01))
return anajoy_word_read(offset);
else if (offset == 0xF14000)
{
- //fprintf(log_get(),"reading 0x%.4x from 0xf14000\n");
+ //WriteLog("reading 0x%.4x from 0xf14000\n");
return (joystick_word_read(offset) & 0xFFFE) | eeprom_word_read(offset);
}
else if ((offset >= 0xF14002) && (offset < 0xF14003))
else if ((offset >= 0xF14000) && (offset <= 0xF1A0FF))
return eeprom_word_read(offset);
-// This is never executed!
-/* offset &= 0xFFFF;
- if (offset==0x4002)
- return(0xffff);*/
+/*if (offset >= 0xF1D000)
+ WriteLog("JERRY: Reading word at %08X [%04X]...\n", offset, ((uint16)jerry_ram_8[(offset+0)&0xFFFF] << 8) | jerry_ram_8[(offset+1)&0xFFFF]);//*/
-/* uint16 data = jerry_ram_8[offset+0];
- data <<= 8;
- data |= jerry_ram_8[offset+1];
- return data;*/
+ offset &= 0xFFFF; // Prevent crashing...!
return ((uint16)jerry_ram_8[offset+0] << 8) | jerry_ram_8[offset+1];
}
//
// JERRY byte access (write)
//
-
-void jerry_byte_write(unsigned offset, unsigned data)
+void JERRYWriteByte(uint32 offset, uint8 data, uint32 who/*=UNKNOWN*/)
{
#ifdef JERRY_DEBUG
- fprintf(log_get(),"jerry: writing byte %.2x at 0x%.6x\n",data,offset);
+ WriteLog("jerry: writing byte %.2x at 0x%.6x\n",data,offset);
#endif
- if ((offset >= dsp_control_ram_base) && (offset < dsp_control_ram_base+0x20))
+ if ((offset >= DSP_CONTROL_RAM_BASE) && (offset < DSP_CONTROL_RAM_BASE+0x20))
{
- dsp_byte_write(offset, data);
+ DSPWriteByte(offset, data, who);
return;
}
- else if ((offset >= dsp_work_ram_base) && (offset < dsp_work_ram_base+0x2000))
+ else if ((offset >= DSP_WORK_RAM_BASE) && (offset < DSP_WORK_RAM_BASE+0x2000))
{
- dsp_byte_write(offset, data);
+ DSPWriteByte(offset, data, who);
return;
}
+ // SCLK ($F1A150--8 bits wide)
else if ((offset >= 0xF1A152) && (offset <= 0xF1A153))
{
-// fprintf(log_get(),"i2s: writing 0x%.2x to SCLK\n",data);
+// WriteLog("JERRY: Writing %02X to SCLK...\n", data);
if ((offset & 0x03) == 2)
jerry_i2s_interrupt_divide = (jerry_i2s_interrupt_divide & 0x00FF) | ((uint32)data << 8);
else
jerry_i2s_interrupt_timer = -1;
jerry_i2s_exec(0);
- return;
+// return;
}
- else if ((offset >= 0xF10000) && (offset <= 0xF10007))
+ // LTXD/RTXD/SCLK/SMODE $F1A148/4C/50/54 (really 16-bit registers...)
+ else if (offset >= 0xF1A148 && offset <= 0xF1A157)
+ {
+ DACWriteByte(offset, data);
+ return;
+ }
+ else if (offset >= 0xF10000 && offset <= 0xF10007)
{
- switch(offset & 0x07)
+ switch (offset & 0x07)
{
case 0:
jerry_timer_1_prescaler = (jerry_timer_1_prescaler & 0x00FF) | (data << 8);
jerry_reset_timer_1();
break;
- case 1: { jerry_timer_1_prescaler=(jerry_timer_1_prescaler&0xff00)|(data); jerry_reset_timer_1(); return; }
+ case 1:
+ jerry_timer_1_prescaler = (jerry_timer_1_prescaler & 0xFF00) | (data);
+ jerry_reset_timer_1();
+ break;
case 2: { jerry_timer_1_divider=(jerry_timer_1_divider&0x00ff)|(data<<8); jerry_reset_timer_1(); return; }
case 3: { jerry_timer_1_divider=(jerry_timer_1_divider&0xff00)|(data); jerry_reset_timer_1(); return; }
case 4: { jerry_timer_2_prescaler=(jerry_timer_2_prescaler&0x00ff)|(data<<8); jerry_reset_timer_2(); return; }
return;
}
+//Need to protect write attempts to Wavetable ROM (F1D000-FFF)
+ if (offset >= 0xF1D000 && offset <= 0xF1DFFF)
+ return;
+
jerry_ram_8[offset & 0xFFFF] = data;
}
//
// JERRY word access (write)
//
-
-void jerry_word_write(unsigned offset, unsigned data)
+void JERRYWriteWord(uint32 offset, uint16 data, uint32 who/*=UNKNOWN*/)
{
#ifdef JERRY_DEBUG
- fprintf(log_get(), "JERRY: Writing word %04X at %06X\n", data, offset);
+ WriteLog( "JERRY: Writing word %04X at %06X\n", data, offset);
#endif
- if ((offset >= dsp_control_ram_base) && (offset < dsp_control_ram_base+0x20))
+ if ((offset >= DSP_CONTROL_RAM_BASE) && (offset < DSP_CONTROL_RAM_BASE+0x20))
{
- dsp_word_write(offset, data);
+ DSPWriteWord(offset, data, who);
return;
}
- else if ((offset >= dsp_work_ram_base) && (offset < dsp_work_ram_base+0x2000))
+ else if ((offset >= DSP_WORK_RAM_BASE) && (offset < DSP_WORK_RAM_BASE+0x2000))
{
- dsp_word_write(offset, data);
+ DSPWriteWord(offset, data, who);
return;
}
- else if (offset == 0xF1A152)
+ else if (offset == 0xF1A152) // Bottom half of SCLK ($F1A150)
{
-// fprintf(log_get(),"i2s: writing 0x%.4x to SCLK\n",data);
- jerry_i2s_interrupt_divide = data & 0xFF;
+ WriteLog("JERRY: Writing %04X to SCLK (by %s)...\n", data, whoName[who]);
+ jerry_i2s_interrupt_divide = (uint8)data;
jerry_i2s_interrupt_timer = -1;
jerry_i2s_exec(0);
+
+ DACWriteWord(offset, data);
+ return;
+ }
+ // LTXD/RTXD/SCLK/SMODE $F1A148/4C/50/54 (really 16-bit registers...)
+ else if (offset >= 0xF1A148 && offset <= 0xF1A156)
+ {
+ DACWriteWord(offset, data);
+ return;
}
else if ((offset >= 0xF10000) && (offset <= 0xF10007))
{
// Need to handle (unaligned) cases???
return;
}
- else if ((offset >= 0xF1A148) && (offset < 0xF1A150))
- {
- pcm_word_write(offset - 0xF1A148, data);
- return;
- }
else if ((offset >= 0xF10010) && (offset < 0xF10016))
{
clock_word_write(offset, data);
return;
}
+ // JERRY -> 68K interrupt enables/latches (need to be handled!)
+ else if (offset >= 0xF10020 && offset <= 0xF10022)
+ {
+ }
else if ((offset >= 0xF17C00) && (offset < 0xF17C02))
{
+//I think this was removed from the Jaguar. If so, then we don't need this...!
anajoy_word_write(offset, data);
return;
}
return;
}
+//Need to protect write attempts to Wavetable ROM (F1D000-FFF)
+ if (offset >= 0xF1D000 && offset <= 0xF1DFFF)
+ return;
+
jerry_ram_8[(offset+0) & 0xFFFF] = (data >> 8) & 0xFF;
jerry_ram_8[(offset+1) & 0xFFFF] = data & 0xFF;
}