//
// Originally by David Raingeard (Cal2)
// GCC/SDL port by Niels Wagenaar (Linux/WIN32) and Carwin Jones (BeOS)
-// Cleanups and endian wrongness amelioration by James L. Hammons
+// Cleanups and endian wrongness amelioration by James Hammons
// Note: Endian wrongness probably stems from the MAME origins of this emu and
// the braindead way in which MAME handled memory when this was written. :-)
//
-// JLH = James L. Hammons
+// JLH = James Hammons
//
// WHO WHEN WHAT
// --- ---------- -----------------------------------------------------------
#include "eeprom.h"
#include "event.h"
#include "gpu.h"
-//#include "gui.h"
#include "jerry.h"
#include "joystick.h"
#include "log.h"
-#include "m68k.h"
+#include "m68000/m68kinterface.h"
//#include "memory.h"
#include "mmu.h"
#include "settings.h"
#include "tom.h"
-#include "video.h"
#define CPU_DEBUG
//Do this in makefile??? Yes! Could, but it's easier to define here...
#define ABORT_ON_ILLEGAL_INSTRUCTIONS
//#define ABORT_ON_OFFICIAL_ILLEGAL_INSTRUCTION
#define CPU_DEBUG_MEMORY
+//#define LOG_CD_BIOS_CALLS
// Private function prototypes
extern int effect_start2, effect_start3, effect_start4, effect_start5, effect_start6;
#endif
+// Really, need to include memory.h for this, but it might interfere with some stuff...
+extern uint8 jagMemSpace[];
+
+// Internal variables
+
uint32 jaguar_active_memory_dumps = 0;
uint32 jaguarMainROMCRC32, jaguarROMSize, jaguarRunAddress;
-
-bool BIOSLoaded = false;
-bool CDBIOSLoaded = false;
+bool jaguarCartInserted = false;
+bool lowerField = false;
#ifdef CPU_DEBUG_MEMORY
uint8 writeMemMax[0x400000], writeMemMin[0x400000];
void M68KInstructionHook(void)
{
uint32 m68kPC = m68k_get_reg(NULL, M68K_REG_PC);
+// Temp, for comparing...
+{
+/* static char buffer[2048];//, mem[64];
+ m68k_disassemble(buffer, m68kPC, M68K_CPU_TYPE_68000);
+ printf("%08X: %s\n", m68kPC, buffer);//*/
+}
+//JaguarDasm(m68kPC, 1);
+//Testing Hover Strike...
+#if 0
+//Dasm(regs.pc, 1);
+static int hitCount = 0;
+static int inRoutine = 0;
+static int instSeen;
+
+//if (regs.pc == 0x80340A)
+if (m68kPC == 0x803416)
+{
+ hitCount++;
+ inRoutine = 1;
+ instSeen = 0;
+ printf("%i: $80340A start. A0=%08X, A1=%08X ", hitCount, m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1));
+}
+else if (m68kPC == 0x803422)
+{
+ inRoutine = 0;
+ printf("(%i instructions)\n", instSeen);
+}
+
+if (inRoutine)
+ instSeen++;
+#endif
// For tracebacks...
// Ideally, we'd save all the registers as well...
static char buffer[2048];
for(int i=0; i<0x400; i++)
{
- m68k_disassemble(buffer, pcQueue[(pcQPtr + i) & 0x3FF], M68K_CPU_TYPE_68000);
+ m68k_disassemble(buffer, pcQueue[(pcQPtr + i) & 0x3FF], 0);//M68K_CPU_TYPE_68000);
WriteLog("\t%08X: %s\n", pcQueue[(pcQPtr + i) & 0x3FF], buffer);
}
WriteLog("\n");
WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
for(int i=0; i<10; i++)
WriteLog("%06X: %08X\n", topOfStack - (i * 4), JaguarReadLong(topOfStack - (i * 4)));
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VIDEO)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
M68K_show_context();
LogDone();
exit(0);
}
+ // Disassemble everything
+/* {
+ static char buffer[2048];
+ m68k_disassemble(buffer, m68kPC, M68K_CPU_TYPE_68000);
+ WriteLog("%08X: %s", m68kPC, buffer);
+ WriteLog("\t\tA0=%08X, A1=%08X, D0=%08X, D1=%08X\n",
+ m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1),
+ m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1));
+ }//*/
/* if (m68kPC >= 0x807EC4 && m68kPC <= 0x807EDB)
{
static char buffer[2048];
if (m68kPC == 0x82E1A)
{
static char buffer[2048];
- m68k_disassemble(buffer, m68kPC, M68K_CPU_TYPE_68000);
+ m68k_disassemble(buffer, m68kPC, 0);//M68K_CPU_TYPE_68000);
WriteLog("--> [Routine start] %08X: %s", m68kPC, buffer);
WriteLog("\t\tA0=%08X, A1=%08X, D0=%08X(cmd), D1=%08X(# bytes), D2=%08X\n",
m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1),
WriteLog("--> [Calling BusWrite2] D2: %08X\n", m68k_get_reg(NULL, M68K_REG_D2));
// m68k_set_reg(M68K_REG_D2, 0x12345678);
}//*/
+
+#ifdef LOG_CD_BIOS_CALLS
/*
CD_init:: -> $3000
BIOS_VER:: -> $3004
WriteLog("\t\tA0=%08X, A1=%08X, D0=%08X, D1=%08X, D2=%08X\n",
m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1),
m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1), m68k_get_reg(NULL, M68K_REG_D2));
-//*/
+#endif
+
#ifdef ABORT_ON_ILLEGAL_INSTRUCTIONS
- if (!m68k_is_valid_instruction(m68k_read_memory_16(m68kPC), M68K_CPU_TYPE_68000))
+ if (!m68k_is_valid_instruction(m68k_read_memory_16(m68kPC), 0))//M68K_CPU_TYPE_68000))
{
#ifndef ABORT_ON_OFFICIAL_ILLEGAL_INSTRUCTION
if (m68k_read_memory_16(m68kPC) == 0x4AFC)
WriteLog("\nM68K encountered an illegal instruction at %08X!!!\n\nAborting!\n", m68kPC);
uint32 topOfStack = m68k_get_reg(NULL, M68K_REG_A7);
WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
+ uint32 address = topOfStack - (4 * 4 * 3);
+
for(int i=0; i<10; i++)
- WriteLog("%06X: %08X\n", topOfStack - (i * 4), JaguarReadLong(topOfStack - (i * 4)));
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ {
+ WriteLog("%06X:", address);
+
+ for(int j=0; j<4; j++)
+ {
+ WriteLog(" %08X", JaguarReadLong(address));
+ address += 4;
+ }
+
+ WriteLog("\n");
+ }
+
+ WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VIDEO)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
M68K_show_context();
//temp
}
#endif
+void ShowM68KContext(void)
+{
+ printf("\t68K PC=%06X\n", m68k_get_reg(NULL, M68K_REG_PC));
+
+ for(int i=M68K_REG_D0; i<=M68K_REG_D7; i++)
+ {
+ printf("D%i = %08X ", i-M68K_REG_D0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_D3 || i == M68K_REG_D7)
+ printf("\n");
+ }
+
+ for(int i=M68K_REG_A0; i<=M68K_REG_A7; i++)
+ {
+ printf("A%i = %08X ", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_A3 || i == M68K_REG_A7)
+ printf("\n");
+ }
+
+ uint32_t currpc = m68k_get_reg(NULL, M68K_REG_PC);
+ uint32_t disPC = currpc - 30;
+ char buffer[128];
+
+ do
+ {
+ uint32_t oldpc = disPC;
+ disPC += m68k_disassemble(buffer, disPC, 0);
+ printf("%s%08X: %s\n", (oldpc == currpc ? ">" : " "), oldpc, buffer);
+ }
+ while (disPC < (currpc + 10));
+}
+
//
-// Musashi 68000 read/write/IRQ functions
+// Custom UAE 68000 read/write/IRQ functions
//
+#if 0
+IRQs:
+=-=-=
+
+ IPL Name Vector Control
+ ---------+---------------+---------------+---------------
+ 2 VBLANK IRQ $100 INT1 bit #0
+ 2 GPU IRQ $100 INT1 bit #1
+ 2 HBLANK IRQ $100 INT1 bit #2
+ 2 Timer IRQ $100 INT1 bit #3
+
+ Note: Both timer interrupts (JPIT && PIT) are on the same INT1 bit.
+ and are therefore indistinguishable.
+
+ A typical way to install a LEVEL2 handler for the 68000 would be
+ something like this, you gotta supply "last_line" and "handler".
+ Note that the interrupt is auto vectored thru $100 (not $68)
+
+
+ V_AUTO = $100
+ VI = $F004E
+ INT1 = $F00E0
+ INT2 = $F00E2
+
+ IRQS_HANDLED=$909 ;; VBLANK and TIMER
+
+ move.w #$2700,sr ;; no IRQs please
+ move.l #handler,V_AUTO ;; install our routine
+
+ move.w #last_line,VI ;; scanline where IRQ should occur
+ ;; should be 'odd' BTW
+ move.w #IRQS_HANDLE&$FF,INT1 ;; enable VBLANK + TIMER
+ move.w #$2100,sr ;; enable IRQs on the 68K
+ ...
+
+handler:
+ move.w d0,-(a7)
+ move.w INT1,d0
+ btst.b #0,d0
+ bne.b .no_blank
+
+ ...
+
+.no_blank:
+ btst.b #3,d0
+ beq.b .no_timer
+
+ ...
+
+.no_timer:
+ move.w #IRQS_HANDLED,INT1 ; clear latch, keep IRQ alive
+ move.w #0,INT2 ; let GPU run again
+ move.w (a7)+,d0
+ rte
+
+ As you can see, if you have multiple INT1 interrupts coming in,
+ you need to check the lower byte of INT1, to see which interrupt
+ happened.
+#endif
int irq_ack_handler(int level)
{
- int vector = M68K_INT_ACK_AUTOVECTOR;
+ // Tracing the IPL lines on the Jaguar schematic yields the following:
+ // IPL1 is connected to INTL on TOM (OUT to 68K)
+ // IPL0-2 are also tied to Vcc via 4.7K resistors!
+ // (DINT on TOM goes into DINT on JERRY (IN Tom from Jerry))
+ // There doesn't seem to be any other path to IPL0 or 2 on the schematic, which means
+ // that *all* IRQs to the 68K are routed thru TOM at level 2. Which means they're all maskable.
// The GPU/DSP/etc are probably *not* issuing an NMI, but it seems to work OK...
+ // They aren't, and this causes problems with a, err, specific ROM. :-D
- if (level == 7)
+ if (level == 2)
{
- m68k_set_irq(0); // Clear the IRQ...
- vector = 64; // Set user interrupt #0
+ m68k_set_irq(0); // Clear the IRQ (NOTE: Without this, the BIOS fails)...
+ return 64; // Set user interrupt #0
}
- return vector;
+ return M68K_INT_ACK_AUTOVECTOR;
}
//#define USE_NEW_MMU
unsigned int m68k_read_memory_8(unsigned int address)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
- if ((address >= 0x000000) && (address <= 0x3FFFFF))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFF))
{
if (startMemLog)
readMem[address] = 1;
#ifndef USE_NEW_MMU
unsigned int retVal = 0;
- if ((address >= 0x000000) && (address <= 0x3FFFFF))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFF))
retVal = jaguarMainRAM[address];
// else if ((address >= 0x800000) && (address <= 0xDFFFFF))
else if ((address >= 0x800000) && (address <= 0xDFFEFF))
retVal = jaguarMainROM[address - 0x800000];
else if ((address >= 0xE00000) && (address <= 0xE3FFFF))
- retVal = jaguarBootROM[address - 0xE00000];
+// retVal = jaguarBootROM[address - 0xE00000];
+// retVal = jaguarDevBootROM1[address - 0xE00000];
+ retVal = jagMemSpace[address];
else if ((address >= 0xDFFF00) && (address <= 0xDFFFFF))
retVal = CDROMReadByte(address);
else if ((address >= 0xF00000) && (address <= 0xF0FFFF))
unsigned int m68k_read_memory_16(unsigned int address)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
/* if ((address >= 0x000000) && (address <= 0x3FFFFE))
{
#ifndef USE_NEW_MMU
unsigned int retVal = 0;
- if ((address >= 0x000000) && (address <= 0x3FFFFE))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFE))
// retVal = (jaguar_mainRam[address] << 8) | jaguar_mainRam[address+1];
retVal = GET16(jaguarMainRAM, address);
// else if ((address >= 0x800000) && (address <= 0xDFFFFE))
else if ((address >= 0x800000) && (address <= 0xDFFEFE))
retVal = (jaguarMainROM[address - 0x800000] << 8) | jaguarMainROM[address - 0x800000 + 1];
else if ((address >= 0xE00000) && (address <= 0xE3FFFE))
- retVal = (jaguarBootROM[address - 0xE00000] << 8) | jaguarBootROM[address - 0xE00000 + 1];
+// retVal = (jaguarBootROM[address - 0xE00000] << 8) | jaguarBootROM[address - 0xE00000 + 1];
+// retVal = (jaguarDevBootROM1[address - 0xE00000] << 8) | jaguarDevBootROM1[address - 0xE00000 + 1];
+ retVal = (jagMemSpace[address] << 8) | jagMemSpace[address + 1];
else if ((address >= 0xDFFF00) && (address <= 0xDFFFFE))
retVal = CDROMReadWord(address, M68K);
else if ((address >= 0xF00000) && (address <= 0xF0FFFE))
unsigned int m68k_read_memory_32(unsigned int address)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
//; So, it seems that it stores the returned DWORD at $51136 and $FB074.
/* if (address == 0x51136 || address == 0xFB074 || address == 0x1AF05E)
WriteLog("[RM32 PC=%08X] Addr: %08X, val: %08X\n", m68k_get_reg(NULL, M68K_REG_PC), address, (m68k_read_memory_16(address) << 16) | m68k_read_memory_16(address + 2));//*/
void m68k_write_memory_8(unsigned int address, unsigned int value)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
- if ((address >= 0x000000) && (address <= 0x3FFFFF))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFF))
{
if (startMemLog)
{
}
}
#endif
+/*if (address == 0x4E00)
+ WriteLog("M68K: Writing %02X at %08X, PC=%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
//if ((address >= 0x1FF020 && address <= 0x1FF03F) || (address >= 0x1FF820 && address <= 0x1FF83F))
// WriteLog("M68K: Writing %02X at %08X\n", value, address);
//WriteLog("[WM8 PC=%08X] Addr: %08X, val: %02X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);
/*if (effect_start)
if (address >= 0x18FA70 && address < (0x18FA70 + 8000))
WriteLog("M68K: Byte %02X written at %08X by 68K\n", value, address);//*/
+//$53D0
+/*if (address >= 0x53D0 && address <= 0x53FF)
+ printf("M68K: Writing byte $%02X at $%08X, PC=$%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
+//Testing AvP on UAE core...
+//000075A0: FFFFF80E B6320220 (BITMAP)
+/*if (address == 0x75A0 && value == 0xFF)
+ printf("M68K: (8) Tripwire hit...\n");//*/
#ifndef USE_NEW_MMU
- if ((address >= 0x000000) && (address <= 0x3FFFFF))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFF))
jaguarMainRAM[address] = value;
else if ((address >= 0xDFFF00) && (address <= 0xDFFFFF))
CDROMWriteByte(address, value, M68K);
void m68k_write_memory_16(unsigned int address, unsigned int value)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
- if ((address >= 0x000000) && (address <= 0x3FFFFE))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFE))
{
if (startMemLog)
{
}
}
#endif
+/*if (address == 0x4E00)
+ WriteLog("M68K: Writing %02X at %08X, PC=%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
//if ((address >= 0x1FF020 && address <= 0x1FF03F) || (address >= 0x1FF820 && address <= 0x1FF83F))
// WriteLog("M68K: Writing %04X at %08X\n", value, address);
//WriteLog("[WM16 PC=%08X] Addr: %08X, val: %04X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);
/* if (address == 0x51136 || address == 0x51138 || address == 0xFB074 || address == 0xFB076
|| address == 0x1AF05E)
WriteLog("[WM16 PC=%08X] Addr: %08X, val: %04X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);//*/
+//$53D0
+/*if (address >= 0x53D0 && address <= 0x53FF)
+ printf("M68K: Writing word $%04X at $%08X, PC=$%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
+//Testing AvP on UAE core...
+//000075A0: FFFFF80E B6320220 (BITMAP)
+/*if (address == 0x75A0 && value == 0xFFFF)
+{
+ printf("\nM68K: (16) Tripwire hit...\n");
+ ShowM68KContext();
+}//*/
#ifndef USE_NEW_MMU
- if ((address >= 0x000000) && (address <= 0x3FFFFE))
+ // Note that the Jaguar only has 2M of RAM, not 4!
+ if ((address >= 0x000000) && (address <= 0x1FFFFE))
{
/* jaguar_mainRam[address] = value >> 8;
jaguar_mainRam[address + 1] = value & 0xFF;*/
void m68k_write_memory_32(unsigned int address, unsigned int value)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
+/*if (address == 0x4E00)
+ WriteLog("M68K: Writing %02X at %08X, PC=%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
//WriteLog("--> [WM32]\n");
/*if (address == 0x0100)//64*4)
WriteLog("M68K: Wrote dword to VI vector value %08X...\n", value);//*/
doGPUDis = true;//*/
/* if (address == 0x51136 || address == 0xFB074)
WriteLog("[WM32 PC=%08X] Addr: %08X, val: %02X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);//*/
+//Testing AvP on UAE core...
+//000075A0: FFFFF80E B6320220 (BITMAP)
+/*if (address == 0x75A0 && (value & 0xFFFF0000) == 0xFFFF0000)
+{
+ printf("\nM68K: (32) Tripwire hit...\n");
+ ShowM68KContext();
+}//*/
#ifndef USE_NEW_MMU
m68k_write_memory_16(address, value >> 16);
void M68K_show_context(void)
{
- WriteLog("\t68K PC=%06X\n", m68k_get_reg(NULL, M68K_REG_PC));
+ WriteLog("68K PC=%06X\n", m68k_get_reg(NULL, M68K_REG_PC));
+
for(int i=M68K_REG_D0; i<=M68K_REG_D7; i++)
- WriteLog("\tD%i = %08X\n", i-M68K_REG_D0, m68k_get_reg(NULL, (m68k_register_t)i));
- WriteLog("\n");
+ {
+ WriteLog("D%i = %08X ", i-M68K_REG_D0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_D3 || i == M68K_REG_D7)
+ WriteLog("\n");
+ }
+
for(int i=M68K_REG_A0; i<=M68K_REG_A7; i++)
- WriteLog("\tA%i = %08X\n", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
+ {
+ WriteLog("A%i = %08X ", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_A3 || i == M68K_REG_A7)
+ WriteLog("\n");
+ }
WriteLog("68K disasm\n");
// jaguar_dasm(s68000readPC()-0x1000,0x20000);
WriteLog("..................\n");
- if (TOMIRQEnabled(IRQ_VBLANK))
+ if (TOMIRQEnabled(IRQ_VIDEO))
{
- WriteLog("vblank int: enabled\n");
+ WriteLog("video int: enabled\n");
JaguarDasm(JaguarGetHandler(64), 0x200);
}
else
- WriteLog("vblank int: disabled\n");
+ WriteLog("video int: disabled\n");
WriteLog("..................\n");
for(int i=0; i<256; i++)
- WriteLog("handler %03i at $%08X\n", i, (unsigned int)JaguarGetHandler(i));
+ {
+ WriteLog("handler %03i at ", i);//$%08X\n", i, (unsigned int)JaguarGetHandler(i));
+ uint32 address = (uint32)JaguarGetHandler(i);
+
+ if (address == 0)
+ WriteLog(".........\n");
+ else
+ WriteLog("$%08X\n", address);
+ }
}
//
pc += Dasm68000((char *)mem, buffer, 0);
WriteLog("%08X: %s\n", oldpc, buffer);//*/
oldpc = pc;
- pc += m68k_disassemble(buffer, pc, M68K_CPU_TYPE_68000);
+ pc += m68k_disassemble(buffer, pc, 0);//M68K_CPU_TYPE_68000);
WriteLog("%08X: %s\n", oldpc, buffer);//*/
}
#endif
uint8 data = 0x00;
offset &= 0xFFFFFF;
- if (offset < 0x400000)
+ if (offset < 0x200000)
data = jaguarMainRAM[offset & 0x3FFFFF];
else if ((offset >= 0x800000) && (offset < 0xC00000))
data = jaguarMainROM[offset - 0x800000];
else if ((offset >= 0xDFFF00) && (offset <= 0xDFFFFF))
data = CDROMReadByte(offset, who);
else if ((offset >= 0xE00000) && (offset < 0xE40000))
- data = jaguarBootROM[offset & 0x3FFFF];
+// data = jaguarBootROM[offset & 0x3FFFF];
+// data = jaguarDevBootROM1[offset & 0x3FFFF];
+ data = jagMemSpace[offset];
else if ((offset >= 0xF00000) && (offset < 0xF10000))
data = TOMReadByte(offset, who);
else if ((offset >= 0xF10000) && (offset < 0xF20000))
uint16 JaguarReadWord(uint32 offset, uint32 who/*=UNKNOWN*/)
{
offset &= 0xFFFFFF;
- if (offset <= 0x3FFFFE)
+ if (offset <= 0x1FFFFE)
{
- return (jaguarMainRAM[(offset+0) & 0x3FFFFF] << 8) | jaguarMainRAM[(offset+1) & 0x3FFFFF];
+ return (jaguarMainRAM[(offset+0) & 0x1FFFFF] << 8) | jaguarMainRAM[(offset+1) & 0x1FFFFF];
}
else if ((offset >= 0x800000) && (offset <= 0xBFFFFE))
{
else if ((offset >= 0xDFFF00) && (offset <= 0xDFFFFE))
return CDROMReadWord(offset, who);
else if ((offset >= 0xE00000) && (offset <= 0xE3FFFE))
- return (jaguarBootROM[(offset+0) & 0x3FFFF] << 8) | jaguarBootROM[(offset+1) & 0x3FFFF];
+// return (jaguarBootROM[(offset+0) & 0x3FFFF] << 8) | jaguarBootROM[(offset+1) & 0x3FFFF];
+// return (jaguarDevBootROM1[(offset+0) & 0x3FFFF] << 8) | jaguarDevBootROM1[(offset+1) & 0x3FFFF];
+ return (jagMemSpace[offset + 0] << 8) | jagMemSpace[offset + 1];
else if ((offset >= 0xF00000) && (offset <= 0xF0FFFE))
return TOMReadWord(offset, who);
else if ((offset >= 0xF10000) && (offset <= 0xF1FFFE))
void JaguarWriteByte(uint32 offset, uint8 data, uint32 who/*=UNKNOWN*/)
{
+/* if (offset >= 0x4E00 && offset < 0x4E04)
+ WriteLog("JWB: Byte %02X written at %08X by %s\n", data, offset, whoName[who]);//*/
//Need to check for writes in the range of $18FA70 + 8000...
/*if (effect_start)
if (offset >= 0x18FA70 && offset < (0x18FA70 + 8000))
WriteLog("JWB: Byte %02X written at %08X by %s\n", data, offset, whoName[who]);//*/
offset &= 0xFFFFFF;
- if (offset < 0x400000)
+ if (offset < 0x200000)
{
- jaguarMainRAM[offset & 0x3FFFFF] = data;
+ jaguarMainRAM[offset & 0x1FFFFF] = data;
return;
}
else if ((offset >= 0xDFFF00) && (offset <= 0xDFFFFF))
uint32 starCount;
void JaguarWriteWord(uint32 offset, uint16 data, uint32 who/*=UNKNOWN*/)
{
+/* if (offset >= 0x4E00 && offset < 0x4E04)
+ WriteLog("JWW: Word %04X written at %08X by %s\n", data, offset, whoName[who]);//*/
/*if (offset == 0x0100)//64*4)
WriteLog("M68K: %s wrote word to VI vector value %04X...\n", whoName[who], data);
if (offset == 0x0102)//64*4)
offset &= 0xFFFFFF;
- if (offset <= 0x3FFFFE)
+ if (offset <= 0x1FFFFE)
{
/*
GPU Table (CD BIOS)
if (offset == 0x11D31A + 0x48000 || offset == 0x11D31A)
WriteLog("JWW: %s writing star %04X at %08X...\n", whoName[who], data, offset);//*/
- jaguarMainRAM[(offset+0) & 0x3FFFFF] = data >> 8;
- jaguarMainRAM[(offset+1) & 0x3FFFFF] = data & 0xFF;
+ jaguarMainRAM[(offset+0) & 0x1FFFFF] = data >> 8;
+ jaguarMainRAM[(offset+1) & 0x1FFFFF] = data & 0xFF;
return;
}
else if (offset >= 0xDFFF00 && offset <= 0xDFFFFE)
JaguarWriteWord(offset+2, data & 0xFFFF, who);
}
+void JaguarSetScreenBuffer(uint32 * buffer)
+{
+ // This is in TOM, but we set it here...
+ screenBuffer = buffer;
+}
+
+void JaguarSetScreenPitch(uint32 pitch)
+{
+ // This is in TOM, but we set it here...
+ screenPitch = pitch;
+}
+
//
// Jaguar console initialization
//
memset(writeMemMin, 0xFF, 0x400000);
memset(writeMemMax, 0x00, 0x400000);
#endif
- memset(jaguarMainRAM, 0x00, 0x400000);
+ memset(jaguarMainRAM, 0x00, 0x200000);
// memset(jaguar_mainRom, 0xFF, 0x200000); // & set it to all Fs...
// memset(jaguar_mainRom, 0x00, 0x200000); // & set it to all 0s...
//NOTE: This *doesn't* fix FlipOut...
//Seems to want $01010101... Dunno why. Investigate!
memset(jaguarMainROM, 0x01, 0x600000); // & set it to all 01s...
// memset(jaguar_mainRom, 0xFF, 0x600000); // & set it to all Fs...
+ lowerField = false; // Reset the lower field flag
+//temp, for crappy crap that sux
+memset(jaguarMainRAM + 0x804, 0xFF, 4);
- m68k_set_cpu_type(M68K_CPU_TYPE_68000);
+// m68k_set_cpu_type(M68K_CPU_TYPE_68000);
+ m68k_pulse_reset(); // Need to do this so UAE disasm doesn't segfault on exit
GPUInit();
DSPInit();
TOMInit();
}
//New timer based code stuffola...
-void ScanlineCallback(void);
+void HalflineCallback(void);
void RenderCallback(void);
-//extern uint32 * backbuffer;
void JaguarReset(void)
{
-//NOTE: This causes a (virtual) crash if this is set in the config but not found... !!! FIX !!!
- if (vjs.useJaguarBIOS)
- memcpy(jaguarMainRAM, jaguarBootROM, 8);
+ // New timer base code stuffola...
+ InitializeEventList();
+//Need to change this so it uses the single RAM space and load the BIOS
+//into it somewhere...
+//Also, have to change this here and in JaguarReadXX() currently
+ // Only use the system BIOS if it's available...! (it's always available now!)
+ // AND only if a jaguar cartridge has been inserted.
+ if (vjs.useJaguarBIOS && jaguarCartInserted && !vjs.hardwareTypeAlpine)
+ memcpy(jaguarMainRAM, jagMemSpace + 0xE00000, 8);
else
SET32(jaguarMainRAM, 4, jaguarRunAddress);
m68k_pulse_reset(); // Reset the 68000
WriteLog("Jaguar: 68K reset. PC=%06X SP=%08X\n", m68k_get_reg(NULL, M68K_REG_PC), m68k_get_reg(NULL, M68K_REG_A7));
- // New timer base code stuffola...
- InitializeEventList();
- TOMResetBackbuffer(backbuffer);
+ lowerField = false; // Reset the lower field flag
// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time
+// SetCallbackTime(ScanlineCallback, 31.77775);
+ SetCallbackTime(HalflineCallback, (vjs.hardwareTypeNTSC ? 31.777777777 : 32.0));
}
void JaguarDone(void)
// for(int i=M68K_REG_A0; i<=M68K_REG_A7; i++)
// WriteLog("\tA%i = 0x%.8x\n", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
int32 topOfStack = m68k_get_reg(NULL, M68K_REG_A7);
- WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
+ WriteLog("M68K: Top of stack: %08X -> (%08X). Stack trace:\n", topOfStack, JaguarReadLong(topOfStack));
+#if 0
for(int i=-2; i<9; i++)
WriteLog("%06X: %08X\n", topOfStack + (i * 4), JaguarReadLong(topOfStack + (i * 4)));
+#else
+ uint32 address = topOfStack - (4 * 4 * 3);
+
+ for(int i=0; i<10; i++)
+ {
+ WriteLog("%06X:", address);
+
+ for(int j=0; j<4; j++)
+ {
+ WriteLog(" %08X", JaguarReadLong(address));
+ address += 4;
+ }
+
+ WriteLog("\n");
+ }
+#endif
/* WriteLog("\nM68000 disassembly at $802288...\n");
jaguar_dasm(0x802288, 3);
WriteLog("\n");//*/
// WriteLog("Jaguar: CD BIOS version %04X\n", JaguarReadWord(0x3004));
- WriteLog("Jaguar: Interrupt enable = %02X\n", TOMReadByte(0xF000E1) & 0x1F);
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ WriteLog("Jaguar: Interrupt enable = $%02X\n", TOMReadByte(0xF000E1, JAGUAR) & 0x1F);
+ WriteLog("Jaguar: Video interrupt is %s (line=%u)\n", ((TOMIRQEnabled(IRQ_VIDEO))
+ && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled", TOMReadWord(0xF0004E, JAGUAR));
M68K_show_context();
//#endif
+#if 0 // This is drawn already...
+ WriteLog("Jaguar: 68K AutoVector table:\n", JaguarReadWord(0x3004));
+ for(uint32 i=0x64; i<=0x7C; i+=4)
+ WriteLog(" #%u: %08X\n", (i-0x64)/4, JaguarReadLong(i));
+#endif
+
CDROMDone();
GPUDone();
DSPDone();
TOMDone();
JERRYDone();
-}
-
-//
-// Main Jaguar execution loop (1 frame)
-//
-void JaguarExecute(uint32 * backbuffer, bool render)
-{
- uint16 vp = TOMReadWord(0xF0003E) + 1;
- uint16 vi = TOMReadWord(0xF0004E);
-//Using WO registers is OK, since we're the ones controlling access--there's nothing wrong here! ;-)
-//Though we shouldn't be able to do it using TOMReadWord... !!! FIX !!!
-
-// uint16 vdb = TOMReadWord(0xF00046);
-//Note: This is the *definite* end of the display, though VDE *might* be less than this...
-// uint16 vbb = TOMReadWord(0xF00040);
-//It seems that they mean it when they say that VDE is the end of object processing.
-//However, we need to be able to tell the OP (or TOM) that we've reached the end of the
-//buffer and not to write any more pixels... !!! FIX !!!
-// uint16 vde = TOMReadWord(0xF00048);
-
- uint16 refreshRate = (vjs.hardwareTypeNTSC ? 60 : 50);
- uint32 m68kClockRate = (vjs.hardwareTypeNTSC ? M68K_CLOCK_RATE_NTSC : M68K_CLOCK_RATE_PAL);
-//Not sure the above is correct, since the number of lines and timings given in the JTRM
-//seem to indicate the refresh rate is *half* the above...
-// uint16 refreshRate = (vjs.hardwareTypeNTSC ? 30 : 25);
- // Should these be hardwired or read from VP? Yes, from VP!
- uint32 M68KCyclesPerScanline = m68kClockRate / (vp * refreshRate);
- uint32 RISCCyclesPerScanline = m68kClockRate / (vp * refreshRate);
-
- TOMResetBackbuffer(backbuffer);
-/*extern int effect_start;
-if (effect_start)
- WriteLog("JagExe: VP=%u, VI=%u, CPU CPS=%u, GPU CPS=%u\n", vp, vi, M68KCyclesPerScanline, RISCCyclesPerScanline);//*/
-
-//extern int start_logging;
- for(uint16 i=0; i<vp; i++)
- {
- // Increment the horizontal count (why? RNG? Besides which, this is *NOT* cycle accurate!)
- TOMWriteWord(0xF00004, (TOMReadWord(0xF00004) + 1) & 0x7FF);
-
- TOMWriteWord(0xF00006, i); // Write the VC
-
-// if (i == vi) // Time for Vertical Interrupt?
-//Not sure if this is correct...
-//Seems to be, kinda. According to the JTRM, this should only fire on odd lines in non-interlace mode...
-//Which means that it normally wouldn't go when it's zero.
- if (i == vi && i > 0 && TOMIRQEnabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
- {
- // We don't have to worry about autovectors & whatnot because the Jaguar
- // tells you through its HW registers who sent the interrupt...
- TOMSetPendingVideoInt();
- m68k_set_irq(7);
- }
-
-//if (start_logging)
-// WriteLog("About to execute M68K (%u)...\n", i);
- m68k_execute(M68KCyclesPerScanline);
-//if (start_logging)
-// WriteLog("About to execute TOM's PIT (%u)...\n", i);
- TOMExecPIT(RISCCyclesPerScanline);
-//if (start_logging)
-// WriteLog("About to execute JERRY's PIT (%u)...\n", i);
- JERRYExecPIT(RISCCyclesPerScanline);
-//if (start_logging)
-// WriteLog("About to execute JERRY's SSI (%u)...\n", i);
- JERRYI2SExec(RISCCyclesPerScanline);
- BUTCHExec(RISCCyclesPerScanline);
-//if (start_logging)
-// WriteLog("About to execute GPU (%u)...\n", i);
- GPUExec(RISCCyclesPerScanline);
-
- if (vjs.DSPEnabled)
- {
- if (vjs.usePipelinedDSP)
- DSPExecP2(RISCCyclesPerScanline); // Pipelined DSP execution (3 stage)...
- else
- DSPExec(RISCCyclesPerScanline); // Ordinary non-pipelined DSP
-// DSPExecComp(RISCCyclesPerScanline); // Comparison core
- }
-//if (start_logging)
-// WriteLog("About to execute OP (%u)...\n", i);
- TOMExecScanline(i, render);
- }
+ // temp, until debugger is in place
+//00802016: jsr $836F1A.l
+//0080201C: jsr $836B30.l
+//00802022: jsr $836B18.l
+//00802028: jsr $8135F0.l
+//00813C1E: jsr $813F76.l
+//00802038: jsr $836D00.l
+//00802098: jsr $8373A4.l
+//008020A2: jsr $83E24A.l
+//008020BA: jsr $83E156.l
+//008020C6: jsr $83E19C.l
+//008020E6: jsr $8445E8.l
+//008020EC: jsr $838C20.l
+//0080211A: jsr $838ED6.l
+//00802124: jsr $89CA56.l
+//0080212A: jsr $802B48.l
+#if 0
+ WriteLog("-------------------------------------------\n");
+ JaguarDasm(0x8445E8, 0x200);
+ WriteLog("-------------------------------------------\n");
+ JaguarDasm(0x838C20, 0x200);
+ WriteLog("-------------------------------------------\n");
+ JaguarDasm(0x838ED6, 0x200);
+ WriteLog("-------------------------------------------\n");
+ JaguarDasm(0x89CA56, 0x200);
+ WriteLog("-------------------------------------------\n");
+ JaguarDasm(0x802B48, 0x200);
+ WriteLog("\n\nM68000 disassembly at $802000...\n");
+ JaguarDasm(0x802000, 6000);
+ WriteLog("\n");//*/
+#endif
+/* WriteLog("\n\nM68000 disassembly at $6004...\n");
+ JaguarDasm(0x6004, 10000);
+ WriteLog("\n");//*/
+// WriteLog("\n\nM68000 disassembly at $802000...\n");
+// JaguarDasm(0x802000, 0x1000);
+// WriteLog("\n\nM68000 disassembly at $4100...\n");
+// JaguarDasm(0x4100, 200);
+// WriteLog("\n\nM68000 disassembly at $800800...\n");
+// JaguarDasm(0x800800, 0x1000);
}
+
// Temp debugging stuff
void DumpMainMemory(void)
fclose(fp);
}
+
uint8 * GetRamPtr(void)
{
return jaguarMainRAM;
}
+
//
// New Jaguar execution stack
+// This executes 1 frame's worth of code.
//
-
-#if 0
-
-void JaguarExecuteNew(void)
-{
- extern bool finished, showGUI;
- extern bool debounceRunKey;
- // Pass a message to the "joystick" code to debounce the ESC key...
- debounceRunKey = true;
- finished = false;
-/* InitializeEventList();
- TOMResetBackbuffer(backbuffer);
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time//*/
-// uint8 * keystate = SDL_GetKeyState(NULL);
-
- do
- {
- double timeToNextEvent = GetTimeToNextEvent();
-//WriteLog("JEN: Time to next event (%u) is %f usec (%u RISC cycles)...\n", nextEvent, timeToNextEvent, USEC_TO_RISC_CYCLES(timeToNextEvent));
-
- m68k_execute(USEC_TO_M68K_CYCLES(timeToNextEvent));
- gpu_exec(USEC_TO_RISC_CYCLES(timeToNextEvent));
-
- if (vjs.DSPEnabled)
- {
- if (vjs.usePipelinedDSP)
- DSPExecP2(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Pipelined DSP execution (3 stage)...
- else
- DSPExec(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Ordinary non-pipelined DSP
- }
-
- HandleNextEvent();
-
-// if (keystate[SDLK_ESCAPE])
-// break;
-
-// SDL_PumpEvents(); // Needed to keep the keystate current...
- }
- while (!finished);
-}
-
-void ScanlineCallback(void)
-{
- uint16 vc = TOMReadWord(0xF00006);
- uint16 vp = TOMReadWord(0xF0003E) + 1;
- uint16 vi = TOMReadWord(0xF0004E);
-// uint16 vbb = TOMReadWord(0xF00040);
- vc++;
-
- if (vc >= vp)
- vc = 0;
-
-//WriteLog("SLC: Currently on line %u (VP=%u)...\n", vc, vp);
- TOMWriteWord(0xF00006, vc);
-
-//This is a crappy kludge, but maybe it'll work for now...
-//Maybe it's not so bad, since the IRQ happens on a scanline boundary...
- if (vc == vi && vc > 0 && tom_irq_enabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
- {
- // We don't have to worry about autovectors & whatnot because the Jaguar
- // tells you through its HW registers who sent the interrupt...
- tom_set_pending_video_int();
- m68k_set_irq(7);
- }
-
- TOMExecScanline(vc, true);
-
-//Change this to VBB???
-//Doesn't seem to matter (at least for Flip Out & I-War)
- if (vc == 0)
-// if (vc == vbb)
- {
-joystick_exec();
-
- RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
- }//*/
-
-// if (vc == 0)
-// TOMResetBackbuffer(backbuffer);
-
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-}
-
-#else
-
bool frameDone;
void JaguarExecuteNew(void)
{
-// extern bool finished, showGUI;
-// extern bool debounceRunKey;
- // Pass a message to the "joystick" code to debounce the ESC key...
-// debounceRunKey = true;
-// finished = false;
-/* InitializeEventList();
- TOMResetBackbuffer(backbuffer);
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time//*/
-// uint8 * keystate = SDL_GetKeyState(NULL);
frameDone = false;
do
//WriteLog("JEN: Time to next event (%u) is %f usec (%u RISC cycles)...\n", nextEvent, timeToNextEvent, USEC_TO_RISC_CYCLES(timeToNextEvent));
m68k_execute(USEC_TO_M68K_CYCLES(timeToNextEvent));
- GPUExec(USEC_TO_RISC_CYCLES(timeToNextEvent));
- if (vjs.DSPEnabled)
- {
- if (vjs.usePipelinedDSP)
- DSPExecP2(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Pipelined DSP execution (3 stage)...
- else
- DSPExec(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Ordinary non-pipelined DSP
- }
+ if (vjs.GPUEnabled)
+ GPUExec(USEC_TO_RISC_CYCLES(timeToNextEvent));
HandleNextEvent();
-
-// if (keystate[SDLK_ESCAPE])
-// break;
-
-// SDL_PumpEvents(); // Needed to keep the keystate current...
}
while (!frameDone);
}
-void ScanlineCallback(void)
+
+#define USE_CORRECT_PAL_TIMINGS
+// A lot of confusion comes from here...
+// The thing to keep in mind is that the VC is advanced every HALF line, regardless
+// of whether the display is interlaced or not. The only difference with an
+// interlaced display is that the high bit of VC will be set when the lower
+// field is being rendered. (NB: The high bit of VC is ALWAYS set on the lower field,
+// regardless of whether it's in interlace mode or not.
+// NB2: Seems it doens't always, not sure what the constraint is...)
+//
+// Normally, TVs will render a full frame in 1/30s (NTSC) or 1/25s (PAL) by
+// rendering two fields that are slighty vertically offset from each other.
+// Each field is created in 1/60s (NTSC) or 1/50s (PAL), and every other line
+// is rendered in this mode so that each field, when overlaid on each other,
+// will yield the final picture at the full resolution for the full frame.
+//
+// We execute a half frame in each timeslice (1/60s NTSC, 1/50s PAL).
+// Since the number of lines in a FULL frame is 525 for NTSC, 625 for PAL,
+// it will be half this number for a half frame. BUT, since we're counting
+// HALF lines, we double this number and we're back at 525 for NTSC, 625 for PAL.
+//
+// Scanline times are 63.5555... μs in NTSC and 64 μs in PAL
+// Half line times are, naturally, half of this. :-P
+void HalflineCallback(void)
{
- uint16 vc = TOMReadWord(0xF00006);
- uint16 vp = TOMReadWord(0xF0003E) + 1;
- uint16 vi = TOMReadWord(0xF0004E);
-// uint16 vbb = TOMReadWord(0xF00040);
+//OK, this is hardwired to run in NTSC, and for who knows how long.
+//Need to fix this so that it does a half-line in the correct amount of time
+//and number of lines, depending on which mode we're in. [FIXED]
+ uint16 vc = TOMReadWord(0xF00006, JAGUAR);
+ uint16 vp = TOMReadWord(0xF0003E, JAGUAR) + 1;
+ uint16 vi = TOMReadWord(0xF0004E, JAGUAR);
+// uint16 vbb = TOMReadWord(0xF00040, JAGUAR);
vc++;
- if (vc >= vp)
+#ifdef USE_CORRECT_PAL_TIMINGS
+ // Each # of lines is for a full frame == 1/30s (NTSC), 1/25s (PAL).
+ // So we cut the number of half-lines in a frame in half. :-P
+ uint16 numHalfLines = ((vjs.hardwareTypeNTSC ? 525 : 625) * 2) / 2;
+
+ if ((vc & 0x7FF) >= numHalfLines)
+#else
+ if ((vc & 0x7FF) >= vp)
+#endif
+ {
vc = 0;
+// lowerField = !lowerField;
+
+ // If we're rendering the lower field, set the high bit (#12, counting
+ // from 1) of VC
+ if (lowerField)
+ vc = 0x0800;
+ }
//WriteLog("SLC: Currently on line %u (VP=%u)...\n", vc, vp);
- TOMWriteWord(0xF00006, vc);
+ TOMWriteWord(0xF00006, vc, JAGUAR);
//This is a crappy kludge, but maybe it'll work for now...
//Maybe it's not so bad, since the IRQ happens on a scanline boundary...
- if (vc == vi && vc > 0 && TOMIRQEnabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
+ if ((vc & 0x7FF) == vi && (vc & 0x7FF) > 0 && TOMIRQEnabled(IRQ_VIDEO)) // Time for Vertical Interrupt?
{
// We don't have to worry about autovectors & whatnot because the Jaguar
// tells you through its HW registers who sent the interrupt...
TOMSetPendingVideoInt();
- m68k_set_irq(7);
+ m68k_set_irq(2);
}
- TOMExecScanline(vc, true);
+ TOMExecHalfline(vc, true);
//Change this to VBB???
//Doesn't seem to matter (at least for Flip Out & I-War)
- if (vc == 0)
+ if ((vc & 0x7FF) == 0)
// if (vc == vbb)
{
JoystickExec();
-//We comment this out so that the GUI can manage this instead. Which is how it should be anyway.
-// RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
frameDone = true;
}//*/
-// if (vc == 0)
-// TOMResetBackbuffer(backbuffer);
-
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
+#ifdef USE_CORRECT_PAL_TIMINGS
+ SetCallbackTime(HalflineCallback, (vjs.hardwareTypeNTSC ? 31.777777777 : 32.0));
+#else
+// SetCallbackTime(HalflineCallback, 63.5555);
+ SetCallbackTime(HalflineCallback, 31.77775);
+#endif
}
-#endif
// This isn't currently used, but maybe it should be...
+/*
+Nah, the scanline based code is good enough, and runs in 1 frame. The GUI
+handles all the rest, so this isn't needed. :-P
+*/
void RenderCallback(void)
{
- RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time
}
projects / virtualjaguar / blobdiff