uint32 jaguar_active_memory_dumps = 0;
uint32 jaguarMainROMCRC32, jaguarROMSize, jaguarRunAddress;
-
-bool BIOSLoaded = false;
-bool CDBIOSLoaded = false;
-
-uint32 * backbuffer;
+bool jaguarCartInserted = false;
+bool lowerField = false;
#ifdef CPU_DEBUG_MEMORY
uint8 writeMemMax[0x400000], writeMemMin[0x400000];
void M68KInstructionHook(void)
{
uint32 m68kPC = m68k_get_reg(NULL, M68K_REG_PC);
+// Temp, for comparing...
+{
+/* static char buffer[2048];//, mem[64];
+ m68k_disassemble(buffer, m68kPC, M68K_CPU_TYPE_68000);
+ printf("%08X: %s\n", m68kPC, buffer);//*/
+}
+//JaguarDasm(m68kPC, 1);
+//Testing Hover Strike...
+#if 0
+//Dasm(regs.pc, 1);
+static int hitCount = 0;
+static int inRoutine = 0;
+static int instSeen;
+
+//if (regs.pc == 0x80340A)
+if (m68kPC == 0x803416)
+{
+ hitCount++;
+ inRoutine = 1;
+ instSeen = 0;
+ printf("%i: $80340A start. A0=%08X, A1=%08X ", hitCount, m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1));
+}
+else if (m68kPC == 0x803422)
+{
+ inRoutine = 0;
+ printf("(%i instructions)\n", instSeen);
+}
+
+if (inRoutine)
+ instSeen++;
+#endif
// For tracebacks...
// Ideally, we'd save all the registers as well...
WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
for(int i=0; i<10; i++)
WriteLog("%06X: %08X\n", topOfStack - (i * 4), JaguarReadLong(topOfStack - (i * 4)));
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VIDEO)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
M68K_show_context();
LogDone();
exit(0);
}
+ // Disassemble everything
+/* {
+ static char buffer[2048];
+ m68k_disassemble(buffer, m68kPC, M68K_CPU_TYPE_68000);
+ WriteLog("%08X: %s", m68kPC, buffer);
+ WriteLog("\t\tA0=%08X, A1=%08X, D0=%08X, D1=%08X\n",
+ m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1),
+ m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1));
+ }//*/
/* if (m68kPC >= 0x807EC4 && m68kPC <= 0x807EDB)
{
static char buffer[2048];
WriteLog("M68K: Top of stack: %08X. Stack trace:\n", JaguarReadLong(topOfStack));
for(int i=0; i<10; i++)
WriteLog("%06X: %08X\n", topOfStack - (i * 4), JaguarReadLong(topOfStack - (i * 4)));
- WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VBLANK)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
+ WriteLog("Jaguar: VBL interrupt is %s\n", ((TOMIRQEnabled(IRQ_VIDEO)) && (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled");
M68K_show_context();
//temp
}
#endif
+void ShowM68KContext(void)
+{
+ printf("\t68K PC=%06X\n", m68k_get_reg(NULL, M68K_REG_PC));
+
+ for(int i=M68K_REG_D0; i<=M68K_REG_D7; i++)
+ {
+ printf("D%i = %08X ", i-M68K_REG_D0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_D3 || i == M68K_REG_D7)
+ printf("\n");
+ }
+
+ for(int i=M68K_REG_A0; i<=M68K_REG_A7; i++)
+ {
+ printf("A%i = %08X ", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_A3 || i == M68K_REG_A7)
+ printf("\n");
+ }
+
+ uint32_t currpc = m68k_get_reg(NULL, M68K_REG_PC);
+ uint32_t disPC = currpc - 30;
+ char buffer[128];
+
+ do
+ {
+ uint32_t oldpc = disPC;
+ disPC += m68k_disassemble(buffer, disPC, 0);
+ printf("%s%08X: %s\n", (oldpc == currpc ? ">" : " "), oldpc, buffer);
+ }
+ while (disPC < (currpc + 10));
+}
+
//
// Musashi 68000 read/write/IRQ functions
//
// Tracing the IPL lines on the Jaguar schematic yields the following:
// IPL1 is connected to INTL on TOM (OUT to 68K)
// IPL0-2 are also tied to Vcc via 4.7K resistors!
- // (DINT on TOM goes into DINT on JERRY (IN from Jerry))
+ // (DINT on TOM goes into DINT on JERRY (IN Tom from Jerry))
// There doesn't seem to be any other path to IPL0 or 2 on the schematic, which means
// that *all* IRQs to the 68K are routed thru TOM at level 2. Which means they're all maskable.
unsigned int m68k_read_memory_8(unsigned int address)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
if ((address >= 0x000000) && (address <= 0x3FFFFF))
{
unsigned int m68k_read_memory_16(unsigned int address)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
/* if ((address >= 0x000000) && (address <= 0x3FFFFE))
{
unsigned int m68k_read_memory_32(unsigned int address)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
//; So, it seems that it stores the returned DWORD at $51136 and $FB074.
/* if (address == 0x51136 || address == 0xFB074 || address == 0x1AF05E)
WriteLog("[RM32 PC=%08X] Addr: %08X, val: %08X\n", m68k_get_reg(NULL, M68K_REG_PC), address, (m68k_read_memory_16(address) << 16) | m68k_read_memory_16(address + 2));//*/
void m68k_write_memory_8(unsigned int address, unsigned int value)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
if ((address >= 0x000000) && (address <= 0x3FFFFF))
{
}
}
#endif
+/*if (address == 0x4E00)
+ WriteLog("M68K: Writing %02X at %08X, PC=%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
//if ((address >= 0x1FF020 && address <= 0x1FF03F) || (address >= 0x1FF820 && address <= 0x1FF83F))
// WriteLog("M68K: Writing %02X at %08X\n", value, address);
//WriteLog("[WM8 PC=%08X] Addr: %08X, val: %02X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);
/*if (effect_start)
if (address >= 0x18FA70 && address < (0x18FA70 + 8000))
WriteLog("M68K: Byte %02X written at %08X by 68K\n", value, address);//*/
+//$53D0
+/*if (address >= 0x53D0 && address <= 0x53FF)
+ printf("M68K: Writing byte $%02X at $%08X, PC=$%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
+//Testing AvP on UAE core...
+//000075A0: FFFFF80E B6320220 (BITMAP)
+/*if (address == 0x75A0 && value == 0xFF)
+ printf("M68K: (8) Tripwire hit...\n");//*/
#ifndef USE_NEW_MMU
if ((address >= 0x000000) && (address <= 0x3FFFFF))
void m68k_write_memory_16(unsigned int address, unsigned int value)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
#ifdef CPU_DEBUG_MEMORY
if ((address >= 0x000000) && (address <= 0x3FFFFE))
{
}
}
#endif
+/*if (address == 0x4E00)
+ WriteLog("M68K: Writing %02X at %08X, PC=%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
//if ((address >= 0x1FF020 && address <= 0x1FF03F) || (address >= 0x1FF820 && address <= 0x1FF83F))
// WriteLog("M68K: Writing %04X at %08X\n", value, address);
//WriteLog("[WM16 PC=%08X] Addr: %08X, val: %04X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);
/* if (address == 0x51136 || address == 0x51138 || address == 0xFB074 || address == 0xFB076
|| address == 0x1AF05E)
WriteLog("[WM16 PC=%08X] Addr: %08X, val: %04X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);//*/
+//$53D0
+/*if (address >= 0x53D0 && address <= 0x53FF)
+ printf("M68K: Writing word $%04X at $%08X, PC=$%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
+//Testing AvP on UAE core...
+//000075A0: FFFFF80E B6320220 (BITMAP)
+/*if (address == 0x75A0 && value == 0xFFFF)
+{
+ printf("\nM68K: (16) Tripwire hit...\n");
+ ShowM68KContext();
+}//*/
#ifndef USE_NEW_MMU
if ((address >= 0x000000) && (address <= 0x3FFFFE))
void m68k_write_memory_32(unsigned int address, unsigned int value)
{
+ // Musashi does this automagically for you, UAE core does not :-P
+ address &= 0x00FFFFFF;
+/*if (address == 0x4E00)
+ WriteLog("M68K: Writing %02X at %08X, PC=%08X\n", value, address, m68k_get_reg(NULL, M68K_REG_PC));//*/
//WriteLog("--> [WM32]\n");
/*if (address == 0x0100)//64*4)
WriteLog("M68K: Wrote dword to VI vector value %08X...\n", value);//*/
doGPUDis = true;//*/
/* if (address == 0x51136 || address == 0xFB074)
WriteLog("[WM32 PC=%08X] Addr: %08X, val: %02X\n", m68k_get_reg(NULL, M68K_REG_PC), address, value);//*/
+//Testing AvP on UAE core...
+//000075A0: FFFFF80E B6320220 (BITMAP)
+/*if (address == 0x75A0 && (value & 0xFFFF0000) == 0xFFFF0000)
+{
+ printf("\nM68K: (32) Tripwire hit...\n");
+ ShowM68KContext();
+}//*/
#ifndef USE_NEW_MMU
m68k_write_memory_16(address, value >> 16);
void M68K_show_context(void)
{
- WriteLog("\t68K PC=%06X\n", m68k_get_reg(NULL, M68K_REG_PC));
+ WriteLog("68K PC=%06X\n", m68k_get_reg(NULL, M68K_REG_PC));
+
for(int i=M68K_REG_D0; i<=M68K_REG_D7; i++)
- WriteLog("\tD%i = %08X\n", i-M68K_REG_D0, m68k_get_reg(NULL, (m68k_register_t)i));
- WriteLog("\n");
+ {
+ WriteLog("D%i = %08X ", i-M68K_REG_D0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_D3 || i == M68K_REG_D7)
+ WriteLog("\n");
+ }
+
for(int i=M68K_REG_A0; i<=M68K_REG_A7; i++)
- WriteLog("\tA%i = %08X\n", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
+ {
+ WriteLog("A%i = %08X ", i-M68K_REG_A0, m68k_get_reg(NULL, (m68k_register_t)i));
+
+ if (i == M68K_REG_A3 || i == M68K_REG_A7)
+ WriteLog("\n");
+ }
WriteLog("68K disasm\n");
// jaguar_dasm(s68000readPC()-0x1000,0x20000);
WriteLog("..................\n");
- if (TOMIRQEnabled(IRQ_VBLANK))
+ if (TOMIRQEnabled(IRQ_VIDEO))
{
WriteLog("video int: enabled\n");
JaguarDasm(JaguarGetHandler(64), 0x200);
void JaguarWriteByte(uint32 offset, uint8 data, uint32 who/*=UNKNOWN*/)
{
+/* if (offset >= 0x4E00 && offset < 0x4E04)
+ WriteLog("JWB: Byte %02X written at %08X by %s\n", data, offset, whoName[who]);//*/
//Need to check for writes in the range of $18FA70 + 8000...
/*if (effect_start)
if (offset >= 0x18FA70 && offset < (0x18FA70 + 8000))
uint32 starCount;
void JaguarWriteWord(uint32 offset, uint16 data, uint32 who/*=UNKNOWN*/)
{
+/* if (offset >= 0x4E00 && offset < 0x4E04)
+ WriteLog("JWW: Word %04X written at %08X by %s\n", data, offset, whoName[who]);//*/
/*if (offset == 0x0100)//64*4)
WriteLog("M68K: %s wrote word to VI vector value %04X...\n", whoName[who], data);
if (offset == 0x0102)//64*4)
JaguarWriteWord(offset+2, data & 0xFFFF, who);
}
+void JaguarSetScreenBuffer(uint32 * buffer)
+{
+ // This is in TOM, but we set it here...
+ screenBuffer = buffer;
+}
+
+void JaguarSetScreenPitch(uint32 pitch)
+{
+ // This is in TOM, but we set it here...
+ screenPitch = pitch;
+}
+
//
// Jaguar console initialization
//
//Seems to want $01010101... Dunno why. Investigate!
memset(jaguarMainROM, 0x01, 0x600000); // & set it to all 01s...
// memset(jaguar_mainRom, 0xFF, 0x600000); // & set it to all Fs...
+ lowerField = false; // Reset the lower field flag
m68k_set_cpu_type(M68K_CPU_TYPE_68000);
+ m68k_pulse_reset(); // Need to do this so UAE disasm doesn't segfault on exit
GPUInit();
DSPInit();
TOMInit();
}
//New timer based code stuffola...
-void ScanlineCallback(void);
+void HalflineCallback(void);
void RenderCallback(void);
-//extern uint32 * backbuffer;
void JaguarReset(void)
{
//Need to change this so it uses the single RAM space and load the BIOS
//into it somewhere...
//Also, have to change this here and in JaguarReadXX() currently
// Only use the system BIOS if it's available...! (it's always available now!)
- if (vjs.useJaguarBIOS && !vjs.hardwareTypeAlpine)
+ // AND only if a jaguar cartridge has been inserted.
+ if (vjs.useJaguarBIOS && jaguarCartInserted && !vjs.hardwareTypeAlpine)
memcpy(jaguarMainRAM, jagMemSpace + 0xE00000, 8);
else
SET32(jaguarMainRAM, 4, jaguarRunAddress);
m68k_pulse_reset(); // Reset the 68000
WriteLog("Jaguar: 68K reset. PC=%06X SP=%08X\n", m68k_get_reg(NULL, M68K_REG_PC), m68k_get_reg(NULL, M68K_REG_A7));
+ lowerField = false; // Reset the lower field flag
// New timer base code stuffola...
InitializeEventList();
- TOMResetBackbuffer(backbuffer);
// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time
+// SetCallbackTime(ScanlineCallback, 31.77775);
+ SetCallbackTime(HalflineCallback, (vjs.hardwareTypeNTSC ? 31.777777777 : 32.0));
}
void JaguarDone(void)
// WriteLog("Jaguar: CD BIOS version %04X\n", JaguarReadWord(0x3004));
WriteLog("Jaguar: Interrupt enable = $%02X\n", TOMReadByte(0xF000E1, JAGUAR) & 0x1F);
- WriteLog("Jaguar: Video interrupt is %s (line=%u)\n", ((TOMIRQEnabled(IRQ_VBLANK))
+ WriteLog("Jaguar: Video interrupt is %s (line=%u)\n", ((TOMIRQEnabled(IRQ_VIDEO))
&& (JaguarInterruptHandlerIsValid(64))) ? "enabled" : "disabled", TOMReadWord(0xF0004E, JAGUAR));
M68K_show_context();
//#endif
JaguarDasm(0x89CA56, 0x200);
WriteLog("-------------------------------------------\n");
JaguarDasm(0x802B48, 0x200);
+ WriteLog("\n\nM68000 disassembly at $802000...\n");
+ JaguarDasm(0x802000, 6000);
+ WriteLog("\n");//*/
#endif
+/* WriteLog("\n\nM68000 disassembly at $4000...\n");
+ JaguarDasm(0x4000, 10000);
+ WriteLog("\n");//*/
+// WriteLog("\n\nM68000 disassembly at $802000...\n");
+// JaguarDasm(0x800830, 0x1000);
}
//
//seem to indicate the refresh rate is *half* the above...
// uint16 refreshRate = (vjs.hardwareTypeNTSC ? 30 : 25);
// Should these be hardwired or read from VP? Yes, from VP!
+ // Err, actually, they should be hardwired, and hardwired to a set # of
+ // lines as well...
uint32 M68KCyclesPerScanline = m68kClockRate / (vp * refreshRate);
uint32 RISCCyclesPerScanline = m68kClockRate / (vp * refreshRate);
- TOMResetBackbuffer(backbuffer);
/*extern int effect_start;
if (effect_start)
WriteLog("JagExe: VP=%u, VI=%u, CPU CPS=%u, GPU CPS=%u\n", vp, vi, M68KCyclesPerScanline, RISCCyclesPerScanline);//*/
{
// Increment the horizontal count (why? RNG? Besides which, this is *NOT* cycle accurate!)
TOMWriteWord(0xF00004, (TOMReadWord(0xF00004, JAGUAR) + 1) & 0x7FF, JAGUAR);
-
TOMWriteWord(0xF00006, i, JAGUAR); // Write the VC
-// if (i == vi) // Time for Vertical Interrupt?
//Not sure if this is correct...
//Seems to be, kinda. According to the JTRM, this should only fire on odd lines in non-interlace mode...
//Which means that it normally wouldn't go when it's zero.
- if (i == vi && i > 0 && TOMIRQEnabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
+ if (i == vi && i > 0 && TOMIRQEnabled(IRQ_VIDEO)) // Time for Vertical Interrupt?
{
// We don't have to worry about autovectors & whatnot because the Jaguar
// tells you through its HW registers who sent the interrupt...
BUTCHExec(RISCCyclesPerScanline);
//if (start_logging)
// WriteLog("About to execute GPU (%u)...\n", i);
- GPUExec(RISCCyclesPerScanline);
+ if (vjs.GPUEnabled)
+ GPUExec(RISCCyclesPerScanline);
if (vjs.DSPEnabled)
{
//if (start_logging)
// WriteLog("About to execute OP (%u)...\n", i);
- TOMExecScanline(i, render);
+ TOMExecHalfline(i, render);
}
}
//
// New Jaguar execution stack
+// This executes 1 frame's worth of code.
//
-
-#if 0
-
-void JaguarExecuteNew(void)
-{
- extern bool finished, showGUI;
- extern bool debounceRunKey;
- // Pass a message to the "joystick" code to debounce the ESC key...
- debounceRunKey = true;
- finished = false;
-/* InitializeEventList();
- TOMResetBackbuffer(backbuffer);
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time//*/
-// uint8 * keystate = SDL_GetKeyState(NULL);
-
- do
- {
- double timeToNextEvent = GetTimeToNextEvent();
-//WriteLog("JEN: Time to next event (%u) is %f usec (%u RISC cycles)...\n", nextEvent, timeToNextEvent, USEC_TO_RISC_CYCLES(timeToNextEvent));
-
- m68k_execute(USEC_TO_M68K_CYCLES(timeToNextEvent));
- gpu_exec(USEC_TO_RISC_CYCLES(timeToNextEvent));
-
- if (vjs.DSPEnabled)
- {
- if (vjs.usePipelinedDSP)
- DSPExecP2(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Pipelined DSP execution (3 stage)...
- else
- DSPExec(USEC_TO_RISC_CYCLES(timeToNextEvent)); // Ordinary non-pipelined DSP
- }
-
- HandleNextEvent();
-
-// if (keystate[SDLK_ESCAPE])
-// break;
-
-// SDL_PumpEvents(); // Needed to keep the keystate current...
- }
- while (!finished);
-}
-
-void ScanlineCallback(void)
-{
- uint16 vc = TOMReadWord(0xF00006, JAGUAR);
- uint16 vp = TOMReadWord(0xF0003E, JAGUAR) + 1;
- uint16 vi = TOMReadWord(0xF0004E, JAGUAR);
-// uint16 vbb = TOMReadWord(0xF00040, JAGUAR);
- vc++;
-
- if (vc >= vp)
- vc = 0;
-
-//WriteLog("SLC: Currently on line %u (VP=%u)...\n", vc, vp);
- TOMWriteWord(0xF00006, vc, JAGUAR);
-
-//This is a crappy kludge, but maybe it'll work for now...
-//Maybe it's not so bad, since the IRQ happens on a scanline boundary...
- if (vc == vi && vc > 0 && tom_irq_enabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
- {
- // We don't have to worry about autovectors & whatnot because the Jaguar
- // tells you through its HW registers who sent the interrupt...
- tom_set_pending_video_int();
- m68k_set_irq(2);
- }
-
- TOMExecScanline(vc, true);
-
-//Change this to VBB???
-//Doesn't seem to matter (at least for Flip Out & I-War)
- if (vc == 0)
-// if (vc == vbb)
- {
-joystick_exec();
-
- RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
- }//*/
-
-// if (vc == 0)
-// TOMResetBackbuffer(backbuffer);
-
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-}
-
-#else
-
bool frameDone;
void JaguarExecuteNew(void)
{
-// extern bool finished, showGUI;
-// extern bool debounceRunKey;
- // Pass a message to the "joystick" code to debounce the ESC key...
-// debounceRunKey = true;
-// finished = false;
-/* InitializeEventList();
- TOMResetBackbuffer(backbuffer);
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
-// SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time//*/
-// uint8 * keystate = SDL_GetKeyState(NULL);
frameDone = false;
do
//WriteLog("JEN: Time to next event (%u) is %f usec (%u RISC cycles)...\n", nextEvent, timeToNextEvent, USEC_TO_RISC_CYCLES(timeToNextEvent));
m68k_execute(USEC_TO_M68K_CYCLES(timeToNextEvent));
- GPUExec(USEC_TO_RISC_CYCLES(timeToNextEvent));
+
+ if (vjs.GPUEnabled)
+ GPUExec(USEC_TO_RISC_CYCLES(timeToNextEvent));
if (vjs.DSPEnabled)
{
}
HandleNextEvent();
-
-// if (keystate[SDLK_ESCAPE])
-// break;
-
-// SDL_PumpEvents(); // Needed to keep the keystate current...
}
while (!frameDone);
}
-void ScanlineCallback(void)
+#define USE_CORRECT_PAL_TIMINGS
+// A lot of confusion comes from here...
+// The thing to keep in mind is that the VC is advanced every HALF line, regardless
+// of whether the display is interlaced or not. The only difference with an
+// interlaced display is that the high bit of VC will be set when the lower
+// field is being rendered. (NB: The high bit of VC is ALWAYS set on the lower field,
+// regardless of whether it's in interlace mode or not.
+// NB2: Seems it doens't always, not sure what the constraint is...)
+//
+// Normally, TVs will render a full frame in 1/30s (NTSC) or 1/25s (PAL) by
+// rendering two fields that are slighty vertically offset from each other.
+// Each field is created in 1/60s (NTSC) or 1/50s (PAL), and every other line
+// is rendered in this mode so that each field, when overlaid on each other,
+// will yield the final picture at the full resolution for the full frame.
+//
+// We execute a half frame in each timeslice (1/60s NTSC, 1/50s PAL).
+// Since the number of lines in a FULL frame is 525 for NTSC, 625 for PAL,
+// it will be half this number for a half frame. BUT, since we're counting
+// HALF lines, we double this number and we're back at 525 for NTSC, 625 for PAL.
+//
+// Scanline times are 63.5555... µs in NTSC and 64 µs in PAL
+// Half line times are, naturally, half of this. :-P
+void HalflineCallback(void)
{
+//OK, this is hardwired to run in NTSC, and for who knows how long.
+//Need to fix this so that it does a half-line in the correct amount of time
+//and number of lines, depending on which mode we're in. [FIXED]
uint16 vc = TOMReadWord(0xF00006, JAGUAR);
uint16 vp = TOMReadWord(0xF0003E, JAGUAR) + 1;
uint16 vi = TOMReadWord(0xF0004E, JAGUAR);
// uint16 vbb = TOMReadWord(0xF00040, JAGUAR);
vc++;
- if (vc >= vp)
+#ifdef USE_CORRECT_PAL_TIMINGS
+ // Each # of lines is for a full frame == 1/30s (NTSC), 1/25s (PAL).
+ // So we cut the number of half-lines in a frame in half. :-P
+ uint16 numHalfLines = ((vjs.hardwareTypeNTSC ? 525 : 625) * 2) / 2;
+
+ if ((vc & 0x7FF) >= numHalfLines)
+#else
+ if ((vc & 0x7FF) >= vp)
+#endif
+ {
vc = 0;
+// lowerField = !lowerField;
+
+ // If we're rendering the lower field, set the high bit (#12, counting
+ // from 1) of VC
+ if (lowerField)
+ vc = 0x0800;
+ }
//WriteLog("SLC: Currently on line %u (VP=%u)...\n", vc, vp);
TOMWriteWord(0xF00006, vc, JAGUAR);
//This is a crappy kludge, but maybe it'll work for now...
//Maybe it's not so bad, since the IRQ happens on a scanline boundary...
- if (vc == vi && vc > 0 && TOMIRQEnabled(IRQ_VBLANK)) // Time for Vertical Interrupt?
+ if ((vc & 0x7FF) == vi && (vc & 0x7FF) > 0 && TOMIRQEnabled(IRQ_VIDEO)) // Time for Vertical Interrupt?
{
// We don't have to worry about autovectors & whatnot because the Jaguar
// tells you through its HW registers who sent the interrupt...
m68k_set_irq(2);
}
- TOMExecScanline(vc, true);
+ TOMExecHalfline(vc, true);
//Change this to VBB???
//Doesn't seem to matter (at least for Flip Out & I-War)
- if (vc == 0)
+ if ((vc & 0x7FF) == 0)
// if (vc == vbb)
{
JoystickExec();
-//We comment this out so that the GUI can manage this instead. Which is how it should be anyway.
-// RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
frameDone = true;
}//*/
-// if (vc == 0)
-// TOMResetBackbuffer(backbuffer);
-
-// SetCallbackTime(ScanlineCallback, 63.5555);
- SetCallbackTime(ScanlineCallback, 31.77775);
-}
-
+#ifdef USE_CORRECT_PAL_TIMINGS
+ SetCallbackTime(HalflineCallback, (vjs.hardwareTypeNTSC ? 31.777777777 : 32.0));
+#else
+// SetCallbackTime(HalflineCallback, 63.5555);
+ SetCallbackTime(HalflineCallback, 31.77775);
#endif
+}
// This isn't currently used, but maybe it should be...
+/*
+Nah, the scanline based code is good enough, and runs in 1 frame. The GUI
+handles all the rest, so this isn't needed. :-P
+*/
void RenderCallback(void)
{
-// RenderBackbuffer();
- TOMResetBackbuffer(backbuffer);
// SetCallbackTime(RenderCallback, 33303.082); // # Scanlines * scanline time
SetCallbackTime(RenderCallback, 16651.541); // # Scanlines * scanline time
}
projects / virtualjaguar / blobdiff