// --- ---------- -------------------------------------------------------------
// JLH 12/23/2009 Created this file
// JLH 12/20/2010 Added settings, menus & toolbars
+// JLH 07/05/2011 Added CD BIOS functionality to GUI
//
// FIXED:
//
+// - Add dbl click/enter to select in cart list, ESC to dimiss [DONE]
+// - Autoscan/autoload all available BIOS from 'software' folder [DONE]
+// - Add 1 key jumping in cartridge list (press 'R', jumps to carts starting with 'R', etc) [DONE]
//
// STILL TO BE DONE:
//
-// - Autoscan/autoload all available BIOS from 'software' folder
// - Controller configuration
// - Remove SDL dependencies (sound, mainly) from Jaguar core lib
-// - Add 1 key jumping in cartridge list (press 'R', jumps to carts starting with 'R', etc)
-// - Add dbl click/enter to select in cart list, ESC to dimiss
+// - Fix inconsistency with trailing slashes in paths (eeproms needs one, software doesn't)
//
-/*
-For BIOS autoscan, infrastructure is already there in filethread.cpp; just need to figure out
-if we want to scan every time, or stuff filenames found into the config file, or what.
-Should filethread emit signal that's intercepted here? Maybe...
-*/
-
// Uncomment this for debugging...
//#define DEBUG
//#define DEBUGFOO // Various tool debugging...
#include "generaltab.h"
#include "version.h"
+#include "dac.h"
#include "jaguar.h"
#include "tom.h"
#include "log.h"
// use, we can drop it in anywhere and use it as-is.
MainWin::MainWin(): running(false), powerButtonOn(false), showUntunedTankCircuit(true),
- cartridgeLoaded(false), CDActive(false)
+ cartridgeLoaded(false), CDActive(false)//, alpineLoadSuccessful(false)
{
videoWidget = new GLWidget(this);
setCentralWidget(videoWidget);
setWindowIcon(QIcon(":/res/vj-icon.png"));
// setWindowTitle("Virtual Jaguar v2.0.0");
- setWindowTitle("Virtual Jaguar " VJ_RELEASE_VERSION );
+
+ QString title = QString(tr("Virtual Jaguar " VJ_RELEASE_VERSION ));
+
+ if (vjs.hardwareTypeAlpine)
+ title += QString(tr(" - Alpine Mode"));
+
+ setWindowTitle(title);
aboutWin = new AboutWindow(this);
filePickWin = new FilePickerWindow(this);
configAct->setShortcut(QKeySequence(tr("Ctrl+c")));
connect(configAct, SIGNAL(triggered()), this, SLOT(Configure()));
- useCDAct = new QAction(QIcon(":/res/generic.png"), tr("&Use CD Unit"), this);
+ useCDAct = new QAction(QIcon(":/res/compact-disc.png"), tr("&Use CD Unit"), this);
useCDAct->setStatusTip(tr("Use Jaguar Virtual CD unit"));
// useCDAct->setShortcut(QKeySequence(tr("Ctrl+c")));
useCDAct->setCheckable(true);
WriteLog("VJ: Using built in BIOS/CD BIOS...\n");
memcpy(jaguarBootROM, jagBootROM, 0x20000);
memcpy(jaguarCDBootROM, jagCDROM, 0x40000);
- BIOSLoaded = CDBIOSLoaded = true;
+// BIOSLoaded = CDBIOSLoaded = true;
+ biosAvailable |= (BIOS_NORMAL | BIOS_CD);
#else
// What would be nice here would be a way to check if the BIOS was loaded so that we
// could disable the pushbutton on the Misc Options menu... !!! FIX !!! [DONE here, but needs to be fixed in GUI as well!]
- WriteLog("VJ: About to attempt to load BIOSes...\n");
+// WriteLog("VJ: About to attempt to load BIOSes...\n");
//This is short-circuiting the file finding thread... ??? WHY ???
//Not anymore. Was related to a QImage object creation/corruption bug elsewhere.
- BIOSLoaded = (JaguarLoadROM(jaguarBootROM, vjs.jagBootPath) == 0x20000 ? true : false);
- WriteLog("VJ: BIOS is %savailable...\n", (BIOSLoaded ? "" : "not "));
- CDBIOSLoaded = (JaguarLoadROM(jaguarCDBootROM, vjs.CDBootPath) == 0x40000 ? true : false);
- WriteLog("VJ: CD BIOS is %savailable...\n", (CDBIOSLoaded ? "" : "not "));
+// BIOSLoaded = (JaguarLoadROM(jaguarBootROM, vjs.jagBootPath) == 0x20000 ? true : false);
+// WriteLog("VJ: BIOS is %savailable...\n", (BIOSLoaded ? "" : "not "));
+// CDBIOSLoaded = (JaguarLoadROM(jaguarCDBootROM, vjs.CDBootPath) == 0x40000 ? true : false);
+// WriteLog("VJ: CD BIOS is %savailable...\n", (CDBIOSLoaded ? "" : "not "));
#endif
filePickWin->ScanSoftwareFolder(allowUnknownSoftware);
+
+ // Load up the default ROM if in Alpine mode:
+ if (vjs.hardwareTypeAlpine)
+ {
+ bool romLoaded = JaguarLoadFile(vjs.alpineROMPath);
+
+ // If regular load failed, try just a straight file load
+ // (Dev only! I don't want people to start getting lazy with their releases again! :-P)
+ if (!romLoaded)
+ romLoaded = AlpineLoadFile(vjs.alpineROMPath);
+
+ if (romLoaded)
+ WriteLog("Alpine Mode: Successfully loaded file \"%s\".\n", vjs.alpineROMPath);
+ else
+ WriteLog("Alpine Mode: Unable to load file \"%s\"!\n", vjs.alpineROMPath);
+
+ // Attempt to load/run the ABS file...
+ LoadSoftware(vjs.absROMPath);
+ }
}
void MainWin::closeEvent(QCloseEvent * event)
{
+ JaguarDone();
WriteSettings();
event->accept(); // ignore() if can't close for some reason
}
|| (e->key() == vjs.p1KeyBindings[BUTTON_D] && joypad_0_buttons[BUTTON_U]))
return;
#else
- if (e->key() == vjs.p1KeyBindings[BUTTON_L] && joypad_0_buttons[BUTTON_R])
+ if (e->key() == (int)vjs.p1KeyBindings[BUTTON_L] && joypad_0_buttons[BUTTON_R])
joypad_0_buttons[BUTTON_R] = 0;
- if (e->key() == vjs.p1KeyBindings[BUTTON_R] && joypad_0_buttons[BUTTON_L])
+ if (e->key() == (int)vjs.p1KeyBindings[BUTTON_R] && joypad_0_buttons[BUTTON_L])
joypad_0_buttons[BUTTON_L] = 0;
- if (e->key() == vjs.p1KeyBindings[BUTTON_U] && joypad_0_buttons[BUTTON_D])
+ if (e->key() == (int)vjs.p1KeyBindings[BUTTON_U] && joypad_0_buttons[BUTTON_D])
joypad_0_buttons[BUTTON_D] = 0;
- if (e->key() == vjs.p1KeyBindings[BUTTON_D] && joypad_0_buttons[BUTTON_U])
+ if (e->key() == (int)vjs.p1KeyBindings[BUTTON_D] && joypad_0_buttons[BUTTON_U])
joypad_0_buttons[BUTTON_U] = 0;
#endif
// No bad combos exist, let's stuff the emulator key buffers...!
for(int i=BUTTON_FIRST; i<=BUTTON_LAST; i++)
{
- if (e->key() == vjs.p1KeyBindings[i])
+ if (e->key() == (int)vjs.p1KeyBindings[i])
joypad_0_buttons[i] = (uint8)state;
}
}
return;
QString before = vjs.ROMPath;
+ QString alpineBefore = vjs.alpineROMPath;
+ QString absBefore = vjs.absROMPath;
+ bool audioBefore = vjs.audioEnabled;
dlg.UpdateVJSettings();
QString after = vjs.ROMPath;
+ QString alpineAfter = vjs.alpineROMPath;
+ QString absAfter = vjs.absROMPath;
+ bool audioAfter = vjs.audioEnabled;
bool allowOld = allowUnknownSoftware;
//ick.
if ((before != after) || (allowOld != allowUnknownSoftware))
filePickWin->ScanSoftwareFolder(allowUnknownSoftware);
+ // If the "Alpine" ROM is changed, then let's load it...
+ if (alpineBefore != alpineAfter)
+ {
+ if (!JaguarLoadFile(vjs.alpineROMPath) || !AlpineLoadFile(vjs.alpineROMPath))
+ {
+ // Oh crap, we couldn't get the file! Alert the media!
+ QMessageBox msg;
+ msg.setText(QString(tr("Could not load file \"%1\"!")).arg(vjs.alpineROMPath));
+ msg.setIcon(QMessageBox::Warning);
+ msg.exec();
+ }
+ }
+
+ // If the "ABS" ROM is changed, then let's load it...
+ if (absBefore != absAfter)
+ {
+ if (!JaguarLoadFile(vjs.absROMPath))
+ {
+ // Oh crap, we couldn't get the file! Alert the media!
+ QMessageBox msg;
+ msg.setText(QString(tr("Could not load file \"%1\"!")).arg(vjs.absROMPath));
+ msg.setIcon(QMessageBox::Warning);
+ msg.exec();
+ }
+ }
+
+ // If the "Enable audio" checkbox changed, then we have to re-init the DAC...
+ if (audioBefore != audioAfter)
+ {
+ DACDone();
+ DACInit();
+ }
+
// Just in case we crash before a clean exit...
WriteSettings();
}
pauseAct->setDisabled(true);
showUntunedTankCircuit = true;
running = true;
+ // This is just in case the ROM we were playing was in a narrow or wide field mode,
+ // so the untuned tank sim doesn't look wrong. :-)
+ TOMReset();
}
else
{
if (!CDActive)
{
- showUntunedTankCircuit = (cartridgeLoaded ? false : true);
+ showUntunedTankCircuit = false;//(cartridgeLoaded ? false : true);
pauseAct->setChecked(false);
pauseAct->setDisabled(!cartridgeLoaded);
}
else
{
+// Should check for cartridgeLoaded here as well...!
+// We can clear it when toggling CDActive on, so that when we power cycle it does the
+// expected thing. Otherwise, if we use the file picker to insert a cart, we expect
+// to run the cart! Maybe have a RemoveCart function that only works if the CD unit
+// is active?
showUntunedTankCircuit = false;
pauseAct->setChecked(false);
pauseAct->setDisabled(false);
memcpy(jagMemSpace + 0x800000, jaguarCDBootROM, 0x40000);
+ setWindowTitle(QString("Virtual Jaguar " VJ_RELEASE_VERSION
+ " - Now playing: Jaguar CD"));
}
//(Err, what's so crappy about this? It seems to do what it's supposed to...)
if (!running)
{
-#if 0
- for(uint32_t x=0; x<videoWidget->rasterWidth; x++)
- for(uint32_t y=0; y<videoWidget->rasterHeight; y++)
- videoWidget->buffer[(y * videoWidget->textureWidth) + x] = 0x00000000;
-#else
-// for(uint32_t i=0; i<TOMGetVideoModeWidth() * 256; i++)
- for(uint32_t i=0; i<videoWidget->textureWidth * 256; i++)
+ for(uint32_t i=0; i<(uint32_t)(videoWidget->textureWidth * 256); i++)
{
uint32_t pixel = backbuffer[i];
-// uint8_t b = (pixel >> 16) & 0xFF, g = (pixel >> 8) & 0xFF, r = pixel & 0xFF;
uint8_t r = (pixel >> 24) & 0xFF, g = (pixel >> 16) & 0xFF, b = (pixel >> 8) & 0xFF;
pixel = ((r + g + b) / 3) & 0x00FF;
-// backbuffer[i] = 0xFF000000 | (pixel << 16) | (pixel << 8);
backbuffer[i] = 0x000000FF | (pixel << 16) | (pixel << 8);
}
-// memcpy(videoWidget->buffer, backbuffer, videoWidget->rasterHeight * videoWidget->rasterWidth);
memcpy(videoWidget->buffer, backbuffer, videoWidget->rasterHeight * videoWidget->textureWidth * sizeof(uint32_t));
-#endif
videoWidget->updateGL();
}
SET32(jaguarMainRAM, 0, 0x00200000); // Set top of stack...
cartridgeLoaded = (JaguarLoadFile(file.toAscii().data()) ? true : false);
+ uint8_t * biosPointer = jaguarBootROM;
+
+ if (vjs.hardwareTypeAlpine)
+ {
+ if (biosAvailable & BIOS_STUB1)
+// memcpy(jagMemSpace + 0xE00000, jaguarDevBootROM1, 0x20000);
+ biosPointer = jaguarDevBootROM1;
+ else if (biosAvailable & BIOS_STUB2)
+// memcpy(jagMemSpace + 0xE00000, jaguarDevBootROM2, 0x20000);
+ biosPointer = jaguarDevBootROM2;
+ }
+// else
+// memcpy(jagMemSpace + 0xE00000, jaguarBootROM, 0x20000);
+
+ memcpy(jagMemSpace + 0xE00000, biosPointer, 0x20000);
+
powerAct->setDisabled(false);
powerAct->setChecked(true);
powerButtonOn = false;
TogglePowerState();
-// QString newTitle = QString("Virtual Jaguar v2.0.0 - Now playing: %1")
- QString newTitle = QString("Virtual Jaguar " VJ_RELEASE_VERSION
- " - Now playing: %1")
- .arg(filePickWin->GetSelectedPrettyName());
- setWindowTitle(newTitle);
+ if (!vjs.hardwareTypeAlpine)
+ {
+ QString newTitle = QString("Virtual Jaguar " VJ_RELEASE_VERSION " - Now playing: %1")
+ .arg(filePickWin->GetSelectedPrettyName());
+ setWindowTitle(newTitle);
+ }
}
void MainWin::ToggleCDUsage(void)
vjs.frameSkip = settings.value("frameSkip", 0).toInt();
vjs.useJaguarBIOS = settings.value("useJaguarBIOS", false).toBool();
vjs.DSPEnabled = settings.value("DSPEnabled", false).toBool();
+ vjs.audioEnabled = settings.value("audioEnabled", true).toBool();
vjs.usePipelinedDSP = settings.value("usePipelinedDSP", false).toBool();
vjs.fullscreen = settings.value("fullscreen", false).toBool();
vjs.useOpenGL = settings.value("useOpenGL", true).toBool();
vjs.glFilter = settings.value("glFilterType", 0).toInt();
vjs.renderType = settings.value("renderType", 0).toInt();
- strcpy(vjs.jagBootPath, settings.value("JagBootROM", "./bios/[BIOS] Atari Jaguar (USA, Europe).zip").toString().toAscii().data());
- strcpy(vjs.CDBootPath, settings.value("CDBootROM", "./bios/jagcd.rom").toString().toAscii().data());
- strcpy(vjs.EEPROMPath, settings.value("EEPROMs", "./eeproms").toString().toAscii().data());
- strcpy(vjs.ROMPath, settings.value("ROMs", "./software").toString().toAscii().data());
+ vjs.allowWritesToROM = settings.value("writeROM", false).toBool();
+// strcpy(vjs.jagBootPath, settings.value("JagBootROM", "./bios/[BIOS] Atari Jaguar (USA, Europe).zip").toString().toAscii().data());
+// strcpy(vjs.CDBootPath, settings.value("CDBootROM", "./bios/jagcd.rom").toString().toAscii().data());
+ strcpy(vjs.EEPROMPath, settings.value("EEPROMs", "./eeproms/").toString().toAscii().data());
+ strcpy(vjs.ROMPath, settings.value("ROMs", "./software/").toString().toAscii().data());
+ strcpy(vjs.alpineROMPath, settings.value("DefaultROM", "").toString().toAscii().data());
+ strcpy(vjs.absROMPath, settings.value("DefaultABS", "").toString().toAscii().data());
WriteLog("MainWin: Paths\n");
-WriteLog(" jagBootPath = \"%s\"\n", vjs.jagBootPath);
-WriteLog(" CDBootPath = \"%s\"\n", vjs.CDBootPath);
-WriteLog(" EEPROMPath = \"%s\"\n", vjs.EEPROMPath);
-WriteLog(" ROMPath = \"%s\"\n", vjs.ROMPath);
+//WriteLog(" jagBootPath = \"%s\"\n", vjs.jagBootPath);
+//WriteLog(" CDBootPath = \"%s\"\n", vjs.CDBootPath);
+WriteLog(" EEPROMPath = \"%s\"\n", vjs.EEPROMPath);
+WriteLog(" ROMPath = \"%s\"\n", vjs.ROMPath);
+WriteLog("AlpineROMPath = \"%s\"\n", vjs.alpineROMPath);
+WriteLog(" absROMPath = \"%s\"\n", vjs.absROMPath);
// Keybindings in order of U, D, L, R, C, B, A, Op, Pa, 0-9, #, *
vjs.p1KeyBindings[BUTTON_U] = settings.value("p1k_up", Qt::Key_Up).toInt();
settings.setValue("frameSkip", vjs.frameSkip);
settings.setValue("useJaguarBIOS", vjs.useJaguarBIOS);
settings.setValue("DSPEnabled", vjs.DSPEnabled);
+ settings.setValue("audioEnabled", vjs.audioEnabled);
settings.setValue("usePipelinedDSP", vjs.usePipelinedDSP);
settings.setValue("fullscreen", vjs.fullscreen);
settings.setValue("useOpenGL", vjs.useOpenGL);
settings.setValue("glFilterType", vjs.glFilter);
settings.setValue("renderType", vjs.renderType);
+ settings.setValue("writeROM", vjs.allowWritesToROM);
settings.setValue("JagBootROM", vjs.jagBootPath);
settings.setValue("CDBootROM", vjs.CDBootPath);
settings.setValue("EEPROMs", vjs.EEPROMPath);
settings.setValue("ROMs", vjs.ROMPath);
+ settings.setValue("DefaultROM", vjs.alpineROMPath);
+ settings.setValue("DefaultABS", vjs.absROMPath);
settings.setValue("p1k_up", vjs.p1KeyBindings[BUTTON_U]);
settings.setValue("p1k_down", vjs.p1KeyBindings[BUTTON_D]);
projects / virtualjaguar / blobdiff