#include "fileio.h"
//#include <stdio.h>
+#include <errno.h>
#include <stdlib.h>
-#include "container.h"
+#include <string.h>
+#include <vector>
+//#include "arc.h"
+//#include "circle.h"
+//#include "container.h"
+//#include "dimension.h"
+//#include "line.h"
+#include "structs.h"
+
+/*
+How to handle connected objects
+-------------------------------
+
+Every Object has a vector<Object *> which enumerates all Objects connected to
+the one we're looking at. So it looks like we'll have to take a two pass
+approach to loading and saving.
+
+Basically, in the saving case, first we write out all objects, keeping a
+pointer-to-index-number record. Second, we loop through all the objects we
+wrote out, writing connection lists. Format (indices are 1-based):
+
+CONNECTIONS
+1: 12 3
+3: 1
+12: 1
+ENDCONNECTIONS
+
+In the reading case, we do pretty much the same: we construct pointer-to-index-
+number list, then read the connection list. The PTIN connects the index to the
+Object pointers we've created. Then we simply call the Object's Connect()
+function to connect the objects.
+
+Small problem though: How does a Dimension know which points on a Line it's
+connected to? This approach tells the Dimension it's connected to the Line and
+the Line that it's connected to the Dimension, but not which points.
+
+How to handle them then? Do we list the point with the Object pointed at? A
+Line can contain an infinite number of points to connect with besides its
+endpoints.
+
+So with each connection Object in the vector, there would also have to be a
+corresponding point to go with it, that would be gotten from the other Object's
+Connect() function. Or, instead of a point, a parameter value?
+
+Doing that, with the Line and a parameter "t", if t == 0 we have endpoint 1.
+if t == 1, then we have endpoint 2. With a Circle, the parameter is a number
+between 0 and 1 (scaled to 0 to 2π). With an Arc, the parameter goes from 0 to
+1, 0 being enpoint 1 and 1 being endpoint 2.
+
+How does this work for moving objects that are connected? Again, with the Line
+and Dimension. The Line's connections looks like this:
+
+Object *: dim1, t = 0
+Object *: dim1, t = 1
+
+Dimension looks like this:
+
+Object *: line1, t = 0
+Object *: line1, t = 1
+
+For Dimensions, it can query the connected object (if any) using something like
+GetPointForParameter(). That way it can figure out where its endpoints are. If
+there is no connected point, then it uses its internal point.
+
+
+Dimensions are special cases of lines: They have exactly *two* points and none
+in between. Therefore, the Dimension object only needs to have two points. But
+those points can be connected to multiple objects. The can also be connected to
+no points/Objects too.
+
+How to describe them and their connections (or lack thereof)?
+
+Would have to be a 2nd pass, after all objects have been written out in order.
+Then you could do something like:
+
+DIMCONNECTIONS
+8 (the Dimension #): 1 (the Object # for point 1) 1 (the Object # for point 2)
+ENDDIMCONNECTIONS
+
+
+
+Connection attributes: E.g., between a Line a Circle, it can be tangent,
+perpendicular, or an arbitrary angle. How to encode that information? It's not
+intrinsic to either the Line or the Circle, but is a function of the
+relationship between them by virtue of their connection.
+
+
+OTHER CONSIDERATIONS:
+---------------------
+
+ - Need to figure out how to store the Layer list (should layer list be optional?)
+ - Need to figure out how to store the Block list and blocks
+
+
+*/
+
+enum ObjectTypeFile { OTFContainer, OTFContainerEnd, OTFLine, OTFCircle, OTFArc, OTFDimension,
+ OTFPolygon, OTFText, OTFImage, OTFBlock, OTFEndOfFile };
/*static*/ bool FileIO::SaveAtnsFile(FILE * file, Container * object)
{
-// QString filename2 = QFileDialog::getSaveFileName(NULL, tr("Save Drawing"),
-// "", tr("Architektonas files (*.drawing)"));
+ /* Approach: loop through the container, doing a depth-first traversal. Any extra
+ containers found are looped through until there aren't any more down, then
+ ordinary objects are described. This can be handled by a virtual Object function
+ that reports the object by itself if it's a non-Container, otherwise it
+ enumerates all objects within itself. */
+ fprintf(file, "ARCHITEKTONAS DRAWING V1.0\n");
+#if 0
+ object->Enumerate(file);
+ fprintf(file, "END\n");
+ return true;
+#else
return false;
+#endif
}
-/*static*/ bool FileIO::LoadAtnsFile(FILE * file, Container * object)
+/*static*/ bool FileIO::LoadAtnsFile(FILE * file, Container * drawing)
{
-// QString filename2 = QFileDialog::getOpenFileName(NULL, tr("Open Drawing"),
-// "", tr("Architektonas files (*.drawing)"));
+// char buffer[256];
+ float version;
+
+ fscanf(file, "ARCHITEKTONAS DRAWING V%f", &version);
+
+//printf("Load: version = %f\n", version);
+ if (version != 1.0)
+ return false;
+ /* Approach: read each object in the file, one by one. If the object is a Container,
+ add objects to it until an "endContainer" marker is found. This will require a
+ stack to maintain the current Container. */
+#if 0
+ std::vector<Container *> containerStack;
+ Container * currentTopContainer = drawing;//new Container(Vector(0, 0));
+ Object * object;
+// ObjectType objectType;
+ int objectType;
+
+ while (!feof(file))
+ {
+ if (FileIO::GetObjectFromFile(file, currentTopContainer, &object, &objectType) == false)
+ return false;
+
+ // object->type down below can be replaced with objType.
+ // Above could be: bool FileIO::GetObjectFromFile(FILE *, Object *, ObjectType *);
+ // where the return value tells if it's a valid object, Object * returns the
+ // reconstructed object and ObjectType * returns the object type.
+
+ if (objectType == OTFEndOfFile)
+ {
+//printf("Load: container size = %li\n", drawing->objects.size());
+ return true;
+ }
+ else if (objectType == OTFContainer)
+ {
+ containerStack.push_back(currentTopContainer);
+ currentTopContainer = new Container(Vector(0, 0), currentTopContainer);
+ }
+ else if (objectType == OTFContainerEnd)
+ {
+ Container * containerToAdd = currentTopContainer;
+ currentTopContainer = containerStack.back();
+ containerStack.pop_back();
+ currentTopContainer->Add(containerToAdd);
+ }
+ else
+ {
+ currentTopContainer->Add(object);
+//printf("Load: Adding object. Container size = %li (%li)\n", drawing->objects.size(), currentTopContainer->objects.size());
+ }
+ }
+
+ return false;
+#else
return false;
+#endif
}
+/*static*/ bool FileIO::GetObjectFromFile(FILE * file, Object * parent, Object ** object, int * objectType)
+{
+#if 0
+ char buffer[256];
+ int foundLayer = 0;
+ int num = fscanf(file, "%s", buffer);
+ bool recognized = false;
+ *object = NULL;
+//printf("FileIO: fscanf returned %i, buffer = \"%s\"\n", num, buffer);
+
+// The following fugliness is for troubleshooting. Can remove later.
+ if ((strcmp(buffer, "END") != 0) && (strcmp(buffer, "ENDCONTAINER") != 0))
+{
+errno = 0;
+ num = fscanf(file, " %i ", &foundLayer);
+//printf("FileIO: fscanf returned %i, foundLayer = %i\n", num, foundLayer);
+if (errno)
+{
+ if (errno == EAGAIN)
+ printf("EAGAIN\n");
+ else if (errno == EBADF)
+ printf("EBADF\n");
+ else if (errno == EILSEQ)
+ printf("EILSEQ\n");
+ else if (errno == EINTR)
+ printf("EINTR\n");
+ else if (errno == EINVAL)
+ printf("EINVAL\n");
+ else if (errno == ENOMEM)
+ printf("ENOMEM\n");
+ else if (errno == ERANGE)
+ printf("ERANGE\n");
+ else
+ printf("errno = %i\n", errno);
+}
+}
+
+ if (strcmp(buffer, "LINE") == 0)
+ {
+//printf(" Found LINE.\n");
+ recognized = true;
+ Vector v1, v2;
+ fscanf(file, "(%lf,%lf) (%lf,%lf)", &v1.x, &v1.y, &v2.x, &v2.y);
+//printf(" Number of params recognized: %i\n", n);
+ *object = new Line(v1, v2, parent);
+ *objectType = OTFLine;
+ }
+ else if (strcmp(buffer, "CIRCLE") == 0)
+ {
+ recognized = true;
+ Vector v;
+ double r;
+ fscanf(file, "(%lf,%lf) %lf", &v.x, &v.y, &r);
+ *object = new Circle(v, r, parent);
+ *objectType = OTFCircle;
+ }
+ else if (strcmp(buffer, "ARC") == 0)
+ {
+ recognized = true;
+ Vector v;
+ double r, a1, a2;
+ fscanf(file, "(%lf,%lf) %lf, %lf, %lf", &v.x, &v.y, &r, &a1, &a2);
+ *object = new Arc(v, r, a1, a2, parent);
+ *objectType = OTFArc;
+ }
+ else if (strcmp(buffer, "DIMENSION") == 0)
+ {
+ recognized = true;
+ Vector v1, v2;
+ DimensionType type;
+ fscanf(file, "(%lf,%lf) (%lf,%lf) %i", &v1.x, &v1.y, &v2.x, &v2.y, &type);
+ *object = new Dimension(v1, v2, type, parent);
+ *objectType = OTFDimension;
+ }
+ else if (strcmp(buffer, "CONTAINER") == 0)
+ {
+ recognized = true;
+ *objectType = OTFContainer;
+ }
+ else if (strcmp(buffer, "ENDCONTAINER") == 0)
+ {
+ recognized = true;
+ *objectType = OTFContainerEnd;
+ }
+ else if (strcmp(buffer, "END") == 0)
+ {
+ recognized = true;
+ *objectType = OTFEndOfFile;
+ }
+
+ if (*object)
+ (*object)->layer = foundLayer;
+
+ return recognized;
+#else
+ return false;
+#endif
+}
+
projects / architektonas / blobdiff