#include "jaguar.h"
#include "jerry.h"
#include "log.h"
-#include "m68k.h"
+#include "m68000/m68kinterface.h"
//#include "memory.h"
bool doDSPDis = false;
//bool doDSPDis = true;
#endif
+bool doDSPDis = false;
+//#define DSP_DIS_JR
+//#define DSP_DIS_JUMP
/*
No dis yet:
static void dsp_opcode_subq(void);
static void dsp_opcode_subqmod(void);
static void dsp_opcode_subqt(void);
+static void dsp_opcode_illegal(void);
uint8 dsp_opcode_cycles[64] =
{
dsp_opcode_mirror, dsp_opcode_store_r14_indexed, dsp_opcode_store_r15_indexed, dsp_opcode_move_pc,
dsp_opcode_jump, dsp_opcode_jr, dsp_opcode_mmult, dsp_opcode_mtoi,
dsp_opcode_normi, dsp_opcode_nop, dsp_opcode_load_r14_ri, dsp_opcode_load_r15_ri,
- dsp_opcode_store_r14_ri, dsp_opcode_store_r15_ri, dsp_opcode_nop, dsp_opcode_addqmod,
+ dsp_opcode_store_r14_ri, dsp_opcode_store_r15_ri, dsp_opcode_illegal, dsp_opcode_addqmod,
};
uint32 dsp_opcode_use[65];
static uint32 dsp_div_control;
static uint8 dsp_flag_z, dsp_flag_n, dsp_flag_c;
static uint32 * dsp_reg = NULL, * dsp_alternate_reg = NULL;
-static uint32 dsp_reg_bank_0[32], dsp_reg_bank_1[32];
+uint32 dsp_reg_bank_0[32], dsp_reg_bank_1[32];
static uint32 dsp_opcode_first_parameter;
static uint32 dsp_opcode_second_parameter;
32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31
};
+
uint8 dsp_branch_condition_table[32 * 8];
static uint16 mirror_table[65536];
static uint8 dsp_ram_8[0x2000];
WriteLog("DSP: ReadWord--Attempt to read from DSP register file by %s!\n", whoName[who]);
//???
offset &= 0xFFFFFFFE;
- // jaguar cd bios
-/* if (jaguar_mainRom_crc32==0xa74a97cd)
- {
- if (offset==0xF1A114) return(0x0000);
- if (offset==0xF1A116) return(0x0000);
- if (offset==0xF1B000) return(0x1234);
- if (offset==0xF1B002) return(0x5678);
- }*/
-/*
- if (jaguar_mainRom_crc32==0x7ae20823)
- {
- if (offset==0xF1B9D8) return(0x0000);
- if (offset==0xF1B9Da) return(0x0000);
- if (offset==0xF1B2C0) return(0x0000);
- if (offset==0xF1B2C2) return(0x0000);
- }
-*/
- // pour permettre � wolfenstein 3d de tourner sans le dsp
-/* if ((offset==0xF1B0D0)||(offset==0xF1B0D2))
- return(0);
-*/
-
- // pour permettre � nba jam de tourner sans le dsp
-/* if (jaguar_mainRom_crc32==0x4faddb18)
- {
- if (offset==0xf1b2c0) return(0);
- if (offset==0xf1b2c2) return(0);
- if (offset==0xf1b240) return(0);
- if (offset==0xf1b242) return(0);
- if (offset==0xF1B340) return(0);
- if (offset==0xF1B342) return(0);
- if (offset==0xF1BAD8) return(0);
- if (offset==0xF1BADA) return(0);
- if (offset==0xF1B040) return(0);
- if (offset==0xF1B042) return(0);
- if (offset==0xF1B0C0) return(0);
- if (offset==0xF1B0C2) return(0);
- if (offset==0xF1B140) return(0);
- if (offset==0xF1B142) return(0);
- if (offset==0xF1B1C0) return(0);
- if (offset==0xF1B1C2) return(0);
- }*/
if (offset >= DSP_WORK_RAM_BASE && offset <= DSP_WORK_RAM_BASE+0x1FFF)
{
offset &= 0x3F;
switch (offset)
{
- case 0x00: /*dsp_flag_c?(dsp_flag_c=1):(dsp_flag_c=0);
- dsp_flag_z?(dsp_flag_z=1):(dsp_flag_z=0);
- dsp_flag_n?(dsp_flag_n=1):(dsp_flag_n=0);*/
-
- dsp_flags = (dsp_flags & 0xFFFFFFF8) | (dsp_flag_n << 2) | (dsp_flag_c << 1) | dsp_flag_z;
- return dsp_flags & 0xFFFFC1FF;
+ case 0x00:
+ dsp_flags = (dsp_flags & 0xFFFFFFF8) | (dsp_flag_n << 2) | (dsp_flag_c << 1) | dsp_flag_z;
+ return dsp_flags & 0xFFFFC1FF;
case 0x04: return dsp_matrix_control;
case 0x08: return dsp_pointer_to_matrix;
case 0x0C: return dsp_data_organization;
if ((offset & 0x1C) == 0x1C)
{
if (offset & 0x03)
- dsp_div_control = (dsp_div_control&0xffff0000)|(data&0xffff);
+ dsp_div_control = (dsp_div_control & 0xFFFF0000) | (data & 0xFFFF);
else
- dsp_div_control = (dsp_div_control&0xffff)|((data&0xffff)<<16);
+ dsp_div_control = (dsp_div_control & 0xFFFF) | ((data & 0xFFFF) << 16);
}
else
{
- uint32 old_data = DSPReadLong(offset & 0xffffffc, who);
+ uint32 old_data = DSPReadLong(offset & 0xFFFFFFC, who);
+
if (offset & 0x03)
- old_data = (old_data&0xffff0000)|(data&0xffff);
+ old_data = (old_data & 0xFFFF0000) | (data & 0xFFFF);
else
- old_data = (old_data&0xffff)|((data&0xffff)<<16);
- DSPWriteLong(offset & 0xffffffc, old_data, who);
+ old_data = (old_data & 0xFFFF) | ((data & 0xFFFF) << 16);
+
+ DSPWriteLong(offset & 0xFFFFFFC, old_data, who);
}
+
return;
}
#endif
// bool IMASKCleared = (dsp_flags & IMASK) && !(data & IMASK);
IMASKCleared = (dsp_flags & IMASK) && !(data & IMASK);
- dsp_flags = data;
+ // NOTE: According to the JTRM, writing a 1 to IMASK has no effect; only the
+ // IRQ logic can set it. So we mask it out here to prevent problems...
+ dsp_flags = data & (~IMASK);
dsp_flag_z = dsp_flags & 0x01;
dsp_flag_c = (dsp_flags >> 1) & 0x01;
dsp_flag_n = (dsp_flags >> 2) & 0x01;
// IRQs on J_INT ($F10020), you don't have to run an I2S interrupt on the DSP. Also,
// It seems that it's only stable for values of SCLK <= 9.
+// All of the preceeding is moot now; we run the DSP in the host audio IRQ. This means
+// that we don't actually need this stuff anymore. :-D
+#if 0
if (data & INT_ENA1) // I2S interrupt
{
int freq = GetCalculatedFrequency();
// WriteLog("DSP: Setting audio freqency to %u Hz...\n", freq);
DACSetNewFrequency(freq);
}
+#endif
/* if (IMASKCleared) // If IMASK was cleared,
#ifdef DSP_DEBUG_IRQ
break;
}
case 0x18:
+WriteLog("DSP: Modulo data %08X written by %s.\n", data, whoName[who]);
dsp_modulo = data;
break;
case 0x1C:
dsp_reg = dsp_reg_bank_1, dsp_alternate_reg = dsp_reg_bank_0;
else
dsp_reg = dsp_reg_bank_0, dsp_alternate_reg = dsp_reg_bank_1;
+
+#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Register bank #%s active.\n", (bank ? "1" : "0"));
+#endif
}
//
return;
int which = 0; // Determine which interrupt
+
if (bits & 0x01)
which = 0;
if (bits & 0x02)
if (bits & 0x20)
which = 5;
-#ifdef DSP_DEBUG_IRQ
- WriteLog("DSP: Generating interrupt #%i...", which);
-#endif
-
- dsp_flags |= IMASK;
+ dsp_flags |= IMASK; // Force Bank #0
//CC only!
#ifdef DSP_DEBUG_CC
ctrl1[4] = dsp_flags;
#endif
//!!!!!!!!
+#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Bank 0: R30=%08X, R31=%08X\n", dsp_reg_bank_0[30], dsp_reg_bank_0[31]);
+ WriteLog("DSP: Bank 1: R30=%08X, R31=%08X\n", dsp_reg_bank_1[30], dsp_reg_bank_1[31]);
+#endif
DSPUpdateRegisterBanks();
#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Bank 0: R30=%08X, R31=%08X\n", dsp_reg_bank_0[30], dsp_reg_bank_0[31]);
+ WriteLog("DSP: Bank 1: R30=%08X, R31=%08X\n", dsp_reg_bank_1[30], dsp_reg_bank_1[31]);
+#endif
+
+#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Generating interrupt #%i...", which);
WriteLog(" [PC will return to %08X, R31 = %08X]\n", dsp_pc, dsp_reg[31]);
#endif
// move pc,r30 ; address of interrupted code
// store r30,(r31) ; store return address
dsp_reg[31] -= 4;
+ dsp_reg[30] = dsp_pc - 2; // -2 because we've executed the instruction already
+
//CC only!
#ifdef DSP_DEBUG_CC
regs1[31] -= 4;
#endif
//!!!!!!!!
- DSPWriteLong(dsp_reg[31], dsp_pc - 2, DSP);
+// DSPWriteLong(dsp_reg[31], dsp_pc - 2, DSP);
+ DSPWriteLong(dsp_reg[31], dsp_reg[30], DSP);
//CC only!
#ifdef DSP_DEBUG_CC
SET32(ram1, regs1[31] - 0xF1B000, dsp_pc - 2);
if (state)
{
dsp_control |= mask; // Set the latch bit
- DSPHandleIRQs();
+#warning !!! No checking done to see if we're using pipelined DSP or not !!!
+// DSPHandleIRQs();
+ DSPHandleIRQsNP();
//CC only!
#ifdef DSP_DEBUG_CC
ctrl1[8] = ctrl2[8] = dsp_control;
for(int j=0; j<8; j++)
{
WriteLog("\tR%02i = %08X R%02i = %08X R%02i = %08X R%02i = %08X\n",
- (j << 2) + 0, dsp_reg_bank_0[(j << 2) + 0],
- (j << 2) + 1, dsp_reg_bank_0[(j << 2) + 1],
- (j << 2) + 2, dsp_reg_bank_0[(j << 2) + 2],
- (j << 2) + 3, dsp_reg_bank_0[(j << 2) + 3]);
+ (j << 2) + 0, dsp_reg_bank_0[(j << 2) + 0],
+ (j << 2) + 1, dsp_reg_bank_0[(j << 2) + 1],
+ (j << 2) + 2, dsp_reg_bank_0[(j << 2) + 2],
+ (j << 2) + 3, dsp_reg_bank_0[(j << 2) + 3]);
}
WriteLog("Registers bank 1\n");
for(int j=0; j<8; j++)
{
WriteLog("\tR%02i = %08X R%02i = %08X R%02i = %08X R%02i = %08X\n",
- (j << 2) + 0, dsp_reg_bank_1[(j << 2) + 0],
- (j << 2) + 1, dsp_reg_bank_1[(j << 2) + 1],
- (j << 2) + 2, dsp_reg_bank_1[(j << 2) + 2],
- (j << 2) + 3, dsp_reg_bank_1[(j << 2) + 3]);
+ (j << 2) + 0, dsp_reg_bank_1[(j << 2) + 0],
+ (j << 2) + 1, dsp_reg_bank_1[(j << 2) + 1],
+ (j << 2) + 2, dsp_reg_bank_1[(j << 2) + 2],
+ (j << 2) + 3, dsp_reg_bank_1[(j << 2) + 3]);
}
}
if (dsp_opcode_use[i])
WriteLog("\t%s %i\n", dsp_opcode_str[i], dsp_opcode_use[i]);
}//*/
-
-// memory_free(dsp_ram_8);
-// memory_free(dsp_reg_bank_0);
-// memory_free(dsp_reg_bank_1);
-// if (dsp_branch_condition_table)
-// free(dsp_branch_condition_table);
-
-// if (mirror_table)
-// free(mirror_table);
}
//static uint32 pcQueue[32], ptrPCQ = 0;
void DSPExec(int32 cycles)
{
-/*HACKS!!! -> if (cycles != 1 && jaguar_mainRom_crc32 == 0xba74c3ed)
- dsp_check_if_i2s_interrupt_needed();*/
-
#ifdef DSP_SINGLE_STEPPING
if (dsp_control & 0x18)
{
if (IMASKCleared) // If IMASK was cleared,
{
#ifdef DSP_DEBUG_IRQ
- WriteLog("DSP: Finished interrupt.\n");
+ WriteLog("DSP: Finished interrupt. PC=$%06X\n", dsp_pc);
#endif
DSPHandleIRQsNP(); // See if any other interrupts are pending!
IMASKCleared = false;
if (doDSPDis)
WriteLog("%06X: SHLQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, 32 - IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
+ // NB: This instruction is the *only* one that does (32 - immediate data).
int32 r1 = 32 - IMM_1;
uint32 res = RN << r1;
SET_ZN(res); dsp_flag_c = (RN >> 31) & 1;
SET_ZN(res);
}
+void dsp_opcode_illegal(void)
+{
+ // Don't know what it does, but it does *something*...
+ WriteLog("%06X: illegal %u, %u [NCZ:%u%u%u]\n", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z);
+}
+
//
// New pipelined DSP core
//
projects / virtualjaguar / blobdiff