//
// DSP core
//
-// by Cal2
+// Originally by David Raingeard
// GCC/SDL port by Niels Wagenaar (Linux/WIN32) and Caz (BeOS)
-// Extensive cleanups/rewrites by James L. Hammons
+// Extensive cleanups/rewrites by James Hammons
+// (C) 2010 Underground Software
+//
+// JLH = James Hammons <jlhamm@acm.org>
+//
+// Who When What
+// --- ---------- -------------------------------------------------------------
+// JLH 01/16/2010 Created this log ;-)
+// JLH 11/26/2011 Added fixes for LOAD/STORE alignment issues
//
-#include <SDL.h> // Used only for SDL_GetTicks...
#include "dsp.h"
-#define DSP_DEBUG
-#define DSP_DEBUG_IRQ
+#include <SDL.h> // Used only for SDL_GetTicks...
+#include <stdlib.h>
+#include <time.h>
+#include "dac.h"
+#include "gpu.h"
+#include "jagdasm.h"
+#include "jaguar.h"
+#include "jerry.h"
+#include "log.h"
+#include "m68000/m68kinterface.h"
+//#include "memory.h"
+
+
+// Seems alignment in loads & stores was off...
+#define DSP_CORRECT_ALIGNMENT
+//#define DSP_CORRECT_ALIGNMENT_STORE
+
+//#define DSP_DEBUG
+//#define DSP_DEBUG_IRQ
+//#define DSP_DEBUG_PL2
+//#define DSP_DEBUG_STALL
+//#define DSP_DEBUG_CC
+#define NEW_SCOREBOARD
// Disassembly definitions
+#if 0
+#define DSP_DIS_ABS
#define DSP_DIS_ADD
#define DSP_DIS_ADDC
#define DSP_DIS_ADDQ
#define DSP_DIS_MOVEI
#define DSP_DIS_MOVEQ
#define DSP_DIS_MOVEFA
+#define DSP_DIS_MOVEPC // Pipeline only!
#define DSP_DIS_MOVETA
#define DSP_DIS_MULT
#define DSP_DIS_NEG
#define DSP_DIS_SUBQT
#define DSP_DIS_XOR
//*/
-//bool doDSPDis = false;
-bool doDSPDis = true;
-
+bool doDSPDis = false;
+//bool doDSPDis = true;
+#endif
/*
No dis yet:
+ load_r14_ri 1229448
*/
+// Pipeline structures
+
+const bool affectsScoreboard[64] =
+{
+ true, true, true, true,
+ true, true, true, true,
+ true, true, true, true,
+ true, false, true, true,
+
+ true, true, false, true,
+ false, true, true, true,
+ true, true, true, true,
+ true, true, false, false,
+
+ true, true, true, true,
+ false, true, true, true,
+ true, true, true, true,
+ true, false, false, false,
+
+ true, false, false, true,
+ false, false, true, true,
+ true, false, true, true,
+ false, false, false, true
+};
+
+struct PipelineStage
+{
+ uint16 instruction;
+ uint8 opcode, operand1, operand2;
+ uint32 reg1, reg2, areg1, areg2;
+ uint32 result;
+ uint8 writebackRegister;
+ // General memory store...
+ uint32 address;
+ uint32 value;
+ uint8 type;
+};
+
+#define TYPE_BYTE 0
+#define TYPE_WORD 1
+#define TYPE_DWORD 2
+#define PIPELINE_STALL 64 // Set to # of opcodes + 1
+#ifndef NEW_SCOREBOARD
+bool scoreboard[32];
+#else
+uint8 scoreboard[32];
+#endif
+uint8 plPtrFetch, plPtrRead, plPtrExec, plPtrWrite;
+PipelineStage pipeline[4];
+bool IMASKCleared = false;
+
// DSP flags (old--have to get rid of this crap)
#define CINT0FLAG 0x00200
static void dsp_opcode_add(void);
static void dsp_opcode_addc(void);
static void dsp_opcode_addq(void);
-static void dsp_opcode_addqmod(void);
+static void dsp_opcode_addqmod(void);
static void dsp_opcode_addqt(void);
static void dsp_opcode_and(void);
static void dsp_opcode_bclr(void);
static void dsp_opcode_load_r14_ri(void);
static void dsp_opcode_load_r15_indexed(void);
static void dsp_opcode_load_r15_ri(void);
-static void dsp_opcode_mirror(void);
+static void dsp_opcode_mirror(void);
static void dsp_opcode_mmult(void);
static void dsp_opcode_move(void);
static void dsp_opcode_movei(void);
static void dsp_opcode_ror(void);
static void dsp_opcode_rorq(void);
static void dsp_opcode_xor(void);
-static void dsp_opcode_sat16s(void);
-static void dsp_opcode_sat32s(void);
+static void dsp_opcode_sat16s(void);
+static void dsp_opcode_sat32s(void);
static void dsp_opcode_sh(void);
static void dsp_opcode_sha(void);
static void dsp_opcode_sharq(void);
static void dsp_opcode_sub(void);
static void dsp_opcode_subc(void);
static void dsp_opcode_subq(void);
-static void dsp_opcode_subqmod(void);
+static void dsp_opcode_subqmod(void);
static void dsp_opcode_subqt(void);
uint8 dsp_opcode_cycles[64] =
{
- 3, 3, 3, 3,
- 3, 3, 3, 3,
- 3, 3, 3, 3,
- 3, 3, 3, 3,
- 3, 3, 1, 3,
- 1, 18, 3, 3,
- 3, 3, 3, 3,
- 3, 3, 3, 3,
- 3, 3, 2, 2,
- 2, 2, 3, 4,
- 5, 4, 5, 6,
- 6, 1, 1, 1,
- 1, 2, 2, 2,
- 1, 1, 9, 3,
- 3, 1, 6, 6,
- 2, 2, 3, 3
-};
+ 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 1, 3, 1, 18, 3, 3,
+ 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 2, 2, 2, 2, 3, 4,
+ 5, 4, 5, 6, 6, 1, 1, 1,
+ 1, 2, 2, 2, 1, 1, 9, 3,
+ 3, 1, 6, 6, 2, 2, 3, 3
+};//*/
+//Here's a QnD kludge...
+//This is wrong, wrong, WRONG, but it seems to work for the time being...
+//(That is, it fixes Flip Out which relies on GPU timing rather than semaphores. Bad developers! Bad!)
+//What's needed here is a way to take pipeline effects into account (including pipeline stalls!)...
+/*uint8 dsp_opcode_cycles[64] =
+{
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 9, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 2,
+ 2, 2, 2, 3, 3, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 4, 1,
+ 1, 1, 3, 3, 1, 1, 1, 1
+};//*/
void (* dsp_opcode[64])() =
-{
+{
dsp_opcode_add, dsp_opcode_addc, dsp_opcode_addq, dsp_opcode_addqt,
dsp_opcode_sub, dsp_opcode_subc, dsp_opcode_subq, dsp_opcode_subqt,
dsp_opcode_neg, dsp_opcode_and, dsp_opcode_or, dsp_opcode_xor,
dsp_opcode_store_r14_ri, dsp_opcode_store_r15_ri, dsp_opcode_nop, dsp_opcode_addqmod,
};
-uint32 dsp_opcode_use[64];
+uint32 dsp_opcode_use[65];
-char * dsp_opcode_str[65]=
-{
+const char * dsp_opcode_str[65]=
+{
"add", "addc", "addq", "addqt",
"sub", "subc", "subq", "subqt",
"neg", "and", "or", "xor",
static uint32 dsp_data_organization;
uint32 dsp_control;
static uint32 dsp_div_control;
-static uint8 dsp_flag_z, dsp_flag_n, dsp_flag_c;
-static uint32 * dsp_reg, * dsp_alternate_reg;
-static uint32 * dsp_reg_bank_0, * dsp_reg_bank_1;
+static uint8 dsp_flag_z, dsp_flag_n, dsp_flag_c;
+static uint32 * dsp_reg = NULL, * dsp_alternate_reg = NULL;
+static uint32 dsp_reg_bank_0[32], dsp_reg_bank_1[32];
static uint32 dsp_opcode_first_parameter;
static uint32 dsp_opcode_second_parameter;
#define CLR_ZN (dsp_flag_z = dsp_flag_n = 0)
#define CLR_ZNC (dsp_flag_z = dsp_flag_n = dsp_flag_c = 0)
#define SET_Z(r) (dsp_flag_z = ((r) == 0))
-#define SET_N(r) (dsp_flag_n = (((UINT32)(r) >> 31) & 0x01))
-#define SET_C_ADD(a,b) (dsp_flag_c = ((UINT32)(b) > (UINT32)(~(a))))
-#define SET_C_SUB(a,b) (dsp_flag_c = ((UINT32)(b) > (UINT32)(a)))
+#define SET_N(r) (dsp_flag_n = (((uint32)(r) >> 31) & 0x01))
+#define SET_C_ADD(a,b) (dsp_flag_c = ((uint32)(b) > (uint32)(~(a))))
+#define SET_C_SUB(a,b) (dsp_flag_c = ((uint32)(b) > (uint32)(a)))
#define SET_ZN(r) SET_N(r); SET_Z(r)
#define SET_ZNC_ADD(a,b,r) SET_N(r); SET_Z(r); SET_C_ADD(a,b)
#define SET_ZNC_SUB(a,b,r) SET_N(r); SET_Z(r); SET_C_SUB(a,b)
-uint32 dsp_convert_zero[32] = { 32,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31 };
-uint8 * dsp_branch_condition_table = NULL;
-static uint16 * mirror_table = NULL;
-static uint8 * dsp_ram_8 = NULL;
+uint32 dsp_convert_zero[32] = {
+ 32, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
+ 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31
+};
+uint8 dsp_branch_condition_table[32 * 8];
+static uint16 mirror_table[65536];
+static uint8 dsp_ram_8[0x2000];
#define BRANCH_CONDITION(x) dsp_branch_condition_table[(x) + ((jaguar_flags & 7) << 5)]
FILE * dsp_fp;
+#ifdef DSP_DEBUG_CC
+// Comparison core vars (used only for core comparison! :-)
+static uint64 count = 0;
+static uint8 ram1[0x2000], ram2[0x2000];
+static uint32 regs1[64], regs2[64];
+static uint32 ctrl1[14], ctrl2[14];
+#endif
+
// Private function prototypes
void DSPDumpRegisters(void);
void dsp_reset_stats(void)
{
- for(int i=0; i<64; i++)
+ for(int i=0; i<65; i++)
dsp_opcode_use[i] = 0;
}
-void dsp_releaseTimeslice(void)
+void DSPReleaseTimeslice(void)
{
//This does absolutely nothing!!! !!! FIX !!!
dsp_releaseTimeSlice_flag = 1;
void dsp_build_branch_condition_table(void)
{
- // Allocate the mirror table
- if (!mirror_table)
- mirror_table = (uint16 *)malloc(65536 * sizeof(mirror_table[0]));
-
// Fill in the mirror table
- if (mirror_table)
- for(int i=0; i<65536; i++)
- mirror_table[i] = ((i >> 15) & 0x0001) | ((i >> 13) & 0x0002) |
- ((i >> 11) & 0x0004) | ((i >> 9) & 0x0008) |
- ((i >> 7) & 0x0010) | ((i >> 5) & 0x0020) |
- ((i >> 3) & 0x0040) | ((i >> 1) & 0x0080) |
- ((i << 1) & 0x0100) | ((i << 3) & 0x0200) |
- ((i << 5) & 0x0400) | ((i << 7) & 0x0800) |
- ((i << 9) & 0x1000) | ((i << 11) & 0x2000) |
- ((i << 13) & 0x4000) | ((i << 15) & 0x8000);
-
- if (!dsp_branch_condition_table)
- {
- dsp_branch_condition_table = (uint8 *)malloc(32 * 8 * sizeof(dsp_branch_condition_table[0]));
-
- // Fill in the condition table
- if (dsp_branch_condition_table)
+ for(int i=0; i<65536; i++)
+ {
+ mirror_table[i] = ((i >> 15) & 0x0001) | ((i >> 13) & 0x0002)
+ | ((i >> 11) & 0x0004) | ((i >> 9) & 0x0008)
+ | ((i >> 7) & 0x0010) | ((i >> 5) & 0x0020)
+ | ((i >> 3) & 0x0040) | ((i >> 1) & 0x0080)
+ | ((i << 1) & 0x0100) | ((i << 3) & 0x0200)
+ | ((i << 5) & 0x0400) | ((i << 7) & 0x0800)
+ | ((i << 9) & 0x1000) | ((i << 11) & 0x2000)
+ | ((i << 13) & 0x4000) | ((i << 15) & 0x8000);
+ }
+
+ // Fill in the condition table
+ for(int i=0; i<8; i++)
+ {
+ for(int j=0; j<32; j++)
{
- for(int i=0; i<8; i++)
- {
- for(int j=0; j<32; j++)
- {
- int result = 1;
- if (j & 1)
- if (i & ZERO_FLAG)
- result = 0;
- if (j & 2)
- if (!(i & ZERO_FLAG))
- result = 0;
- if (j & 4)
- if (i & (CARRY_FLAG << (j >> 4)))
- result = 0;
- if (j & 8)
- if (!(i & (CARRY_FLAG << (j >> 4))))
- result = 0;
- dsp_branch_condition_table[i * 32 + j] = result;
- }
- }
+ int result = 1;
+
+ if ((j & 1) && (i & ZERO_FLAG))
+ result = 0;
+
+ if ((j & 2) && (!(i & ZERO_FLAG)))
+ result = 0;
+
+ if ((j & 4) && (i & (CARRY_FLAG << (j >> 4))))
+ result = 0;
+
+ if ((j & 8) && (!(i & (CARRY_FLAG << (j >> 4)))))
+ result = 0;
+
+ dsp_branch_condition_table[i * 32 + j] = result;
}
}
}
}
return JaguarReadByte(offset, who);
-}
+}
uint16 DSPReadWord(uint32 offset, uint32 who/*=UNKNOWN*/)
{
if (offset==0xF1B2C2) return(0x0000);
}
*/
- // pour permettre à wolfenstein 3d de tourner sans le dsp
+ // pour permettre � wolfenstein 3d de tourner sans le dsp
/* if ((offset==0xF1B0D0)||(offset==0xF1B0D2))
return(0);
*/
- // pour permettre à nba jam de tourner sans le dsp
+ // pour permettre � nba jam de tourner sans le dsp
/* if (jaguar_mainRom_crc32==0x4faddb18)
{
if (offset==0xf1b2c0) return(0);
offset &= 0x3F;
switch (offset)
{
- case 0x00: /*dsp_flag_c?(dsp_flag_c=1):(dsp_flag_c=0);
- dsp_flag_z?(dsp_flag_z=1):(dsp_flag_z=0);
- dsp_flag_n?(dsp_flag_n=1):(dsp_flag_n=0);*/
-
- dsp_flags = (dsp_flags & 0xFFFFFFF8) | (dsp_flag_n << 2) | (dsp_flag_c << 1) | dsp_flag_z;
- return dsp_flags & 0xFFFFC1FF;
+ case 0x00:
+ dsp_flags = (dsp_flags & 0xFFFFFFF8) | (dsp_flag_n << 2) | (dsp_flag_c << 1) | dsp_flag_z;
+ return dsp_flags & 0xFFFFC1FF;
case 0x04: return dsp_matrix_control;
case 0x08: return dsp_pointer_to_matrix;
case 0x0C: return dsp_data_organization;
/* if (dsp_in_exec == 0)
{
m68k_end_timeslice();
- gpu_releaseTimeslice();
+ dsp_releaseTimeslice();
}*/
return;
}
{
uint32 reg = offset & 0x1C;
int bytenum = offset & 0x03;
-
+
if ((reg >= 0x1C) && (reg <= 0x1F))
dsp_div_control = (dsp_div_control & (~(0xFF << (bytenum << 3)))) | (data << (bytenum << 3));
else
//This looks funky. !!! FIX !!!
uint32 old_data = DSPReadLong(offset&0xFFFFFFC, who);
bytenum = 3 - bytenum; // convention motorola !!!
- old_data = (old_data & (~(0xFF << (bytenum << 3)))) | (data << (bytenum << 3));
+ old_data = (old_data & (~(0xFF << (bytenum << 3)))) | (data << (bytenum << 3));
DSPWriteLong(offset & 0xFFFFFFC, old_data, who);
}
return;
// WriteLog("dsp: writing %.4x at 0x%.8x\n",data,offset);
if ((offset >= DSP_WORK_RAM_BASE) && (offset < DSP_WORK_RAM_BASE+0x2000))
{
+/*if (offset == 0xF1B2F4)
+{
+ WriteLog("DSP: %s is writing %04X at location 0xF1B2F4 (DSP_PC: %08X)...\n", whoName[who], data, dsp_pc);
+}//*/
offset -= DSP_WORK_RAM_BASE;
dsp_ram_8[offset] = data >> 8;
dsp_ram_8[offset+1] = data & 0xFF;
{
// WriteLog("dsp: writing %.4x at 0x%.8x\n",data,offset+DSP_WORK_RAM_BASE);
m68k_end_timeslice();
- gpu_releaseTimeslice();
+ dsp_releaseTimeslice();
}*/
+//CC only!
+#ifdef DSP_DEBUG_CC
+SET16(ram1, offset, data),
+SET16(ram2, offset, data);
+#endif
+//!!!!!!!!
return;
}
else if ((offset >= DSP_CONTROL_RAM_BASE) && (offset < DSP_CONTROL_RAM_BASE+0x20))
if ((offset & 0x1C) == 0x1C)
{
if (offset & 0x03)
- dsp_div_control = (dsp_div_control&0xffff0000)|(data&0xffff);
+ dsp_div_control = (dsp_div_control & 0xFFFF0000) | (data & 0xFFFF);
else
- dsp_div_control = (dsp_div_control&0xffff)|((data&0xffff)<<16);
+ dsp_div_control = (dsp_div_control & 0xFFFF) | ((data & 0xFFFF) << 16);
}
else
{
- uint32 old_data = DSPReadLong(offset & 0xffffffc, who);
+ uint32 old_data = DSPReadLong(offset & 0xFFFFFFC, who);
+
if (offset & 0x03)
- old_data = (old_data&0xffff0000)|(data&0xffff);
+ old_data = (old_data & 0xFFFF0000) | (data & 0xFFFF);
else
- old_data = (old_data&0xffff)|((data&0xffff)<<16);
- DSPWriteLong(offset & 0xffffffc, old_data, who);
+ old_data = (old_data & 0xFFFF) | ((data & 0xFFFF) << 16);
+
+ DSPWriteLong(offset & 0xFFFFFFC, old_data, who);
}
+
return;
}
}//*/
offset -= DSP_WORK_RAM_BASE;
SET32(dsp_ram_8, offset, data);
+//CC only!
+#ifdef DSP_DEBUG_CC
+SET32(ram1, offset, data),
+SET32(ram2, offset, data);
+#endif
+//!!!!!!!!
return;
}
else if (offset >= DSP_CONTROL_RAM_BASE && offset <= (DSP_CONTROL_RAM_BASE + 0x1F))
case 0x00:
{
#ifdef DSP_DEBUG
- WriteLog("DSP: Writing %08X to DSP_FLAGS by %s...\n", data, whoName[who]);
+ WriteLog("DSP: Writing %08X to DSP_FLAGS by %s (REGPAGE is %sset)...\n", data, whoName[who], (dsp_flags & REGPAGE ? "" : "not "));
#endif
- bool IMASKCleared = (dsp_flags & IMASK) && !(data & IMASK);
- dsp_flags = data;
+// bool IMASKCleared = (dsp_flags & IMASK) && !(data & IMASK);
+ IMASKCleared = (dsp_flags & IMASK) && !(data & IMASK);
+ // NOTE: According to the JTRM, writing a 1 to IMASK has no effect; only the
+ // IRQ logic can set it. So we mask it out here to prevent problems...
+ dsp_flags = data & (~IMASK);
dsp_flag_z = dsp_flags & 0x01;
dsp_flag_c = (dsp_flags >> 1) & 0x01;
dsp_flag_n = (dsp_flags >> 2) & 0x01;
DSPUpdateRegisterBanks();
dsp_control &= ~((dsp_flags & CINT04FLAGS) >> 3);
dsp_control &= ~((dsp_flags & CINT5FLAG) >> 1);
- if (IMASKCleared) // If IMASK was cleared,
+
+// NB: This is just a wild hairy-assed guess as to what the playback frequency is.
+// It can be timed to anything really, anything that writes to L/RTXD at a regular
+// interval. Most things seem to use either the I2S interrupt or the TIMER 0
+// interrupt, so that's what we check for here. Just know that this approach
+// can be easily fooled!
+// Note also that if both interrupts are enabled, the I2S freq will win. :-P
+
+// Further Note:
+// The impetus for this "fix" was Cybermorph, which sets the SCLK to 7 which is an
+// audio frequency > 48 KHz. However, it stuffs the L/RTXD registers using TIMER0.
+// So, while this works, it's a by-product of the lame way in which audio is currently
+// handled. Hopefully, once we run the DSP in the host audio IRQ, this problem will
+// go away of its own accord. :-P
+// Or does it? It seems the I2S interrupt isn't on with Cybermorph, so something
+// weird is going on here...
+// Maybe it works like this: It acknowledges the 1st interrupt, but never clears it.
+// So subsequent interrupts come into the chip, but they're never serviced but the
+// I2S subsystem keeps going.
+// After some testing on real hardware, it seems that if you enable TIMER0 and EXTERNAL
+// IRQs on J_INT ($F10020), you don't have to run an I2S interrupt on the DSP. Also,
+// It seems that it's only stable for values of SCLK <= 9.
+
+// All of the preceeding is moot now; we run the DSP in the host audio IRQ. This means
+// that we don't actually need this stuff anymore. :-D
+#if 0
+ if (data & INT_ENA1) // I2S interrupt
+ {
+ int freq = GetCalculatedFrequency();
+//This happens too often to be useful...
+// WriteLog("DSP: Setting audio freqency to %u Hz...\n", freq);
+ DACSetNewFrequency(freq);
+ }
+ else if (data & INT_ENA2) // TIMER 0 interrupt
+ {
+ int freq = JERRYGetPIT1Frequency();
+//This happens too often to be useful...
+// WriteLog("DSP: Setting audio freqency to %u Hz...\n", freq);
+ DACSetNewFrequency(freq);
+ }
+#endif
+
+/* if (IMASKCleared) // If IMASK was cleared,
#ifdef DSP_DEBUG_IRQ
{
WriteLog("DSP: Finished interrupt.\n");
DSPHandleIRQs(); // see if any other interrupts need servicing!
#ifdef DSP_DEBUG_IRQ
}
+#endif//*/
+#if 0
+ if (/*4-8, 16*/data & 0x101F0)
+ WriteLog("DSP: %s is enabling interrupts %s%s%s%s%s%s\n", whoName[who],
+ (data & 0x010 ? "CPU " : ""), (data & 0x020 ? "I2S " : ""),
+ (data & 0x040 ? "TIMER0 " : ""), (data & 0x080 ? "TIMER1 " : ""),
+ (data & 0x100 ? "EXT0 " : ""), (data & 0x10000 ? "EXT1" : ""));
+/*if (data & 0x00020) // CD BIOS DSP code...
+{
+//001AC1BA: movea.l #$1AC200, A0
+//001AC1C0: move.l #$1AC68C, D0
+ char buffer[512];
+
+ WriteLog("\n---[DSP code at 00F1B97C]---------------------------\n");
+ uint32 j = 0xF1B97C;//0x1AC200;
+ while (j <= 0xF1BE08)//0x1AC68C)
+ {
+ uint32 oldj = j;
+ j += dasmjag(JAGUAR_DSP, buffer, j);
+// WriteLog("\t%08X: %s\n", oldj+0xD6F77C, buffer);
+ WriteLog("\t%08X: %s\n", oldj, buffer);
+ }
+}//*/
#endif
break;
}
dsp_matrix_control = data;
break;
case 0x08:
- // According to JTRM, only lines 2-11 are adressable, the rest being
+ // According to JTRM, only lines 2-11 are addressable, the rest being
// hardwired to $F1Bxxx.
dsp_pointer_to_matrix = 0xF1B000 | (data & 0x000FFC);
break;
#ifdef DSP_DEBUG
WriteLog("DSP: Setting DSP PC to %08X by %s%s\n", dsp_pc, whoName[who], (DSP_RUNNING ? " (DSP is RUNNING!)" : ""));//*/
#endif
+//CC only!
+#ifdef DSP_DEBUG_CC
+if (who != DSP)
+ ctrl1[0] = ctrl2[0] = data;
+#endif
+//!!!!!!!!
break;
case 0x14:
- {
+ {
+//#ifdef DSP_DEBUG
+WriteLog("Write to DSP CTRL by %s: %08X (DSP PC=$%08X)\n", whoName[who], data, dsp_pc);
+//#endif
+ bool wasRunning = DSP_RUNNING;
// uint32 dsp_was_running = DSP_RUNNING;
// Check for DSP -> CPU interrupt
if (data & CPUINT)
{
-// WriteLog("DSP: DSP -> CPU interrupt\n");
+#ifdef DSP_DEBUG
+ WriteLog("DSP: DSP -> CPU interrupt\n");
+#endif
// This was WRONG
-// Why do we check for a valid handler at 64? Isn't that the Jag programmer's responsibility?
- if (JERRYIRQEnabled(IRQ2_DSP) && jaguar_interrupt_handler_is_valid(64))
+// Why do we check for a valid handler at 64? Isn't that the Jag programmer's responsibility? (YES)
+#warning "!!! DSP IRQs that go to the 68K have to be routed thru TOM !!! FIX !!!"
+ if (JERRYIRQEnabled(IRQ2_DSP))// && jaguar_interrupt_handler_is_valid(64))
{
JERRYSetPendingIRQ(IRQ2_DSP);
- dsp_releaseTimeslice();
- m68k_set_irq(7); // Set 68000 NMI...
+ DSPReleaseTimeslice();
+ m68k_set_irq(2); // Set 68000 IPL 2...
}
data &= ~CPUINT;
}
WriteLog("DSP: CPU -> DSP interrupt\n");
#endif
m68k_end_timeslice();
- gpu_releaseTimeslice();
+ DSPReleaseTimeslice();
DSPSetIRQLine(DSPIRQ_CPU, ASSERT_LINE);
data &= ~DSPINT0;
}
// Protect writes to VERSION and the interrupt latches...
uint32 mask = VERSION | INT_LAT0 | INT_LAT1 | INT_LAT2 | INT_LAT3 | INT_LAT4 | INT_LAT5;
dsp_control = (dsp_control & mask) | (data & ~mask);
+//CC only!
+#ifdef DSP_DEBUG_CC
+if (who != DSP)
+ ctrl1[8] = ctrl2[8] = dsp_control;
+#endif
+//!!!!!!!!
// if dsp wasn't running but is now running
// execute a few cycles
DSPExec(1);
#endif
#ifdef DSP_DEBUG
-WriteLog("Write to DSP CTRL: %08X ", data);
if (DSP_RUNNING)
WriteLog(" --> Starting to run at %08X by %s...", dsp_pc, whoName[who]);
else
WriteLog(" --> Stopped by %s! (DSP PC: %08X)", whoName[who], dsp_pc);
WriteLog("\n");
#endif // DSP_DEBUG
-//This isn't exactly right either--we don't know if it was the M68K or the GPU writing here...
+//This isn't exactly right either--we don't know if it was the M68K or the DSP writing here...
// !!! FIX !!! [DONE]
if (DSP_RUNNING)
{
if (who == M68K)
m68k_end_timeslice();
- else if (who == GPU)
- gpu_releaseTimeslice();
+ else if (who == DSP)
+ DSPReleaseTimeslice();
- FlushDSPPipeline();
+ if (!wasRunning)
+ FlushDSPPipeline();
//DSPDumpDisassembly();
}
break;
}
//
-// Check for an handle any asserted DSP IRQs
+// Check for and handle any asserted DSP IRQs
//
void DSPHandleIRQs(void)
{
if (!bits) // Bail if nothing is enabled
return;
- int which = 0; // Determine which interrupt
+ int which = 0; // Determine which interrupt
if (bits & 0x01)
which = 0;
if (bits & 0x02)
which = 5;
#ifdef DSP_DEBUG_IRQ
- WriteLog("DSP: Generating interrupt #%i...\n", which);
+ WriteLog("DSP: Generating interrupt #%i...", which);
#endif
+//temp... !!!!!
+//if (which == 0) doDSPDis = true;
+
+ // NOTE: Since the actual Jaguar hardware injects the code sequence below
+ // directly into the pipeline, it has the side effect of ensuring that the
+ // instruction interrupted also gets to do its writeback. We simulate that
+ // behavior here.
+/* if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFF)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ scoreboard[pipeline[plPtrWrite].operand2] = false;
+ }//*/
+//This should be execute (or should it?--not sure now!)
+//Actually, the way this is called now, this should be correct (i.e., the plPtrs advance,
+//and what just executed is now in the Write position...). So why didn't it do the
+//writeback into register 0?
+#ifdef DSP_DEBUG_IRQ
+WriteLog("--> Pipeline dump [DSP_PC=%08X]...\n", dsp_pc);
+WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister, dsp_opcode_str[pipeline[plPtrRead].opcode]);
+WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister, dsp_opcode_str[pipeline[plPtrExec].opcode]);
+WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister, dsp_opcode_str[pipeline[plPtrWrite].opcode]);
+#endif
+ if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFF)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFE)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+ else
+ {
+ if (pipeline[plPtrWrite].type == TYPE_BYTE)
+ JaguarWriteByte(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else if (pipeline[plPtrWrite].type == TYPE_WORD)
+ JaguarWriteWord(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else
+ JaguarWriteLong(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ }
+ }
+
+#ifndef NEW_SCOREBOARD
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ scoreboard[pipeline[plPtrWrite].operand2] = false;
+#else
+//Yup, sequential MOVEQ # problem fixing (I hope!)...
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ if (scoreboard[pipeline[plPtrWrite].operand2])
+ scoreboard[pipeline[plPtrWrite].operand2]--;
+#endif
+ }
+
dsp_flags |= IMASK;
+//CC only!
+#ifdef DSP_DEBUG_CC
+ctrl2[4] = dsp_flags;
+#endif
+//!!!!!!!!
DSPUpdateRegisterBanks();
+#ifdef DSP_DEBUG_IRQ
+// WriteLog(" [PC will return to %08X, R31 = %08X]\n", dsp_pc, dsp_reg[31]);
+ WriteLog(" [PC will return to %08X, R31 = %08X]\n", dsp_pc - (pipeline[plPtrExec].opcode == 38 ? 6 : (pipeline[plPtrExec].opcode == PIPELINE_STALL ? 0 : 2)), dsp_reg[31]);
+#endif
- // subqt #4,r31 ; pre-decrement stack pointer
- // move pc,r30 ; address of interrupted code
+ // subqt #4,r31 ; pre-decrement stack pointer
+ // move pc,r30 ; address of interrupted code
// store r30,(r31) ; store return address
dsp_reg[31] -= 4;
- DSPWriteLong(dsp_reg[31], dsp_pc - 2, DSP);
+//CC only!
+#ifdef DSP_DEBUG_CC
+regs2[31] -= 4;
+#endif
+//!!!!!!!!
+//This might not come back to the right place if the instruction was MOVEI #. !!! FIX !!!
+//But, then again, JTRM says that it adds two regardless of what the instruction was...
+//It missed the place that it was supposed to come back to, so this is WRONG!
+//
+// Look at the pipeline when an interrupt occurs (instructions of foo, bar, baz):
+//
+// R -> baz (<- PC points here)
+// E -> bar (when it should point here!)
+// W -> foo
+//
+// 'Foo' just completed executing as per above. PC is pointing to the instruction 'baz'
+// which means (assuming they're all 2 bytes long) that the code below will come back on
+// instruction 'baz' instead of 'bar' which is the next instruction to execute in the
+// instruction stream...
+
+// DSPWriteLong(dsp_reg[31], dsp_pc - 2, DSP);
+ DSPWriteLong(dsp_reg[31], dsp_pc - 2 - (pipeline[plPtrExec].opcode == 38 ? 6 : (pipeline[plPtrExec].opcode == PIPELINE_STALL ? 0 : 2)), DSP);
+//CC only!
+#ifdef DSP_DEBUG_CC
+SET32(ram2, regs2[31] - 0xF1B000, dsp_pc - 2 - (pipeline[plPtrExec].opcode == 38 ? 6 : (pipeline[plPtrExec].opcode == PIPELINE_STALL ? 0 : 2)));
+#endif
+//!!!!!!!!
- // movei #service_address,r30 ; pointer to ISR entry
- // jump (r30) ; jump to ISR
+ // movei #service_address,r30 ; pointer to ISR entry
+ // jump (r30) ; jump to ISR
// nop
dsp_pc = dsp_reg[30] = DSP_WORK_RAM_BASE + (which * 0x10);
+//CC only!
+#ifdef DSP_DEBUG_CC
+ctrl2[0] = regs2[30] = dsp_pc;
+#endif
+//!!!!!!!!
FlushDSPPipeline();
}
+//
+// Non-pipelined version...
+//
+void DSPHandleIRQsNP(void)
+{
+//CC only!
+#ifdef DSP_DEBUG_CC
+ memcpy(dsp_ram_8, ram1, 0x2000);
+ memcpy(dsp_reg_bank_0, regs1, 32 * 4);
+ memcpy(dsp_reg_bank_1, ®s1[32], 32 * 4);
+ dsp_pc = ctrl1[0];
+ dsp_acc = ctrl1[1];
+ dsp_remain = ctrl1[2];
+ dsp_modulo = ctrl1[3];
+ dsp_flags = ctrl1[4];
+ dsp_matrix_control = ctrl1[5];
+ dsp_pointer_to_matrix = ctrl1[6];
+ dsp_data_organization = ctrl1[7];
+ dsp_control = ctrl1[8];
+ dsp_div_control = ctrl1[9];
+ IMASKCleared = ctrl1[10];
+ dsp_flag_z = ctrl1[11];
+ dsp_flag_n = ctrl1[12];
+ dsp_flag_c = ctrl1[13];
+DSPUpdateRegisterBanks();
+#endif
+//!!!!!!!!
+ if (dsp_flags & IMASK) // Bail if we're already inside an interrupt
+ return;
+
+ // Get the active interrupt bits (latches) & interrupt mask (enables)
+ uint32 bits = ((dsp_control >> 10) & 0x20) | ((dsp_control >> 6) & 0x1F),
+ mask = ((dsp_flags >> 11) & 0x20) | ((dsp_flags >> 4) & 0x1F);
+
+// WriteLog("dsp: bits=%.2x mask=%.2x\n",bits,mask);
+ bits &= mask;
+
+ if (!bits) // Bail if nothing is enabled
+ return;
+
+ int which = 0; // Determine which interrupt
+ if (bits & 0x01)
+ which = 0;
+ if (bits & 0x02)
+ which = 1;
+ if (bits & 0x04)
+ which = 2;
+ if (bits & 0x08)
+ which = 3;
+ if (bits & 0x10)
+ which = 4;
+ if (bits & 0x20)
+ which = 5;
+
+#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Generating interrupt #%i...", which);
+#endif
+
+ dsp_flags |= IMASK;
+//CC only!
+#ifdef DSP_DEBUG_CC
+ctrl1[4] = dsp_flags;
+#endif
+//!!!!!!!!
+ DSPUpdateRegisterBanks();
+#ifdef DSP_DEBUG_IRQ
+ WriteLog(" [PC will return to %08X, R31 = %08X]\n", dsp_pc, dsp_reg[31]);
+#endif
+
+ // subqt #4,r31 ; pre-decrement stack pointer
+ // move pc,r30 ; address of interrupted code
+ // store r30,(r31) ; store return address
+ dsp_reg[31] -= 4;
+//CC only!
+#ifdef DSP_DEBUG_CC
+regs1[31] -= 4;
+#endif
+//!!!!!!!!
+ DSPWriteLong(dsp_reg[31], dsp_pc - 2, DSP);
+//CC only!
+#ifdef DSP_DEBUG_CC
+SET32(ram1, regs1[31] - 0xF1B000, dsp_pc - 2);
+#endif
+//!!!!!!!!
+
+ // movei #service_address,r30 ; pointer to ISR entry
+ // jump (r30) ; jump to ISR
+ // nop
+ dsp_pc = dsp_reg[30] = DSP_WORK_RAM_BASE + (which * 0x10);
+//CC only!
+#ifdef DSP_DEBUG_CC
+ctrl1[0] = regs1[30] = dsp_pc;
+#endif
+//!!!!!!!!
+}
+
//
// Set the specified DSP IRQ line to a given state
//
//NOTE: This doesn't take INT_LAT5 into account. !!! FIX !!!
uint32 mask = INT_LAT0 << irqline;
dsp_control &= ~mask; // Clear the latch bit
+//CC only!
+#ifdef DSP_DEBUG_CC
+ctrl1[8] = ctrl2[8] = dsp_control;
+#endif
+//!!!!!!!!
if (state)
{
dsp_control |= mask; // Set the latch bit
DSPHandleIRQs();
+//CC only!
+#ifdef DSP_DEBUG_CC
+ctrl1[8] = ctrl2[8] = dsp_control;
+DSPHandleIRQsNP();
+#endif
+//!!!!!!!!
}
+
+ // Not sure if this is correct behavior, but according to JTRM,
+ // the IRQ output of JERRY is fed to this IRQ in the GPU...
+// Not sure this is right--DSP interrupts seem to be different from the JERRY interrupts!
+// GPUSetIRQLine(GPUIRQ_DSP, ASSERT_LINE);
+}
+
+bool DSPIsRunning(void)
+{
+ return (DSP_RUNNING ? true : false);
}
void DSPInit(void)
{
- memory_malloc_secure((void **)&dsp_ram_8, 0x2000, "DSP work RAM");
- memory_malloc_secure((void **)&dsp_reg_bank_0, 32 * sizeof(int32), "DSP bank 0 regs");
- memory_malloc_secure((void **)&dsp_reg_bank_1, 32 * sizeof(int32), "DSP bank 1 regs");
+// memory_malloc_secure((void **)&dsp_ram_8, 0x2000, "DSP work RAM");
+// memory_malloc_secure((void **)&dsp_reg_bank_0, 32 * sizeof(int32), "DSP bank 0 regs");
+// memory_malloc_secure((void **)&dsp_reg_bank_1, 32 * sizeof(int32), "DSP bank 1 regs");
dsp_build_branch_condition_table();
DSPReset();
+ srand(time(NULL)); // For randomizing local RAM
}
void DSPReset(void)
dsp_reg[i] = dsp_alternate_reg[i] = 0x00000000;
CLR_ZNC;
-
+ IMASKCleared = false;
+ FlushDSPPipeline();
dsp_reset_stats();
- memset(dsp_ram_8, 0xFF, 0x2000);
+// memset(dsp_ram_8, 0xFF, 0x2000);
+ // Contents of local RAM are quasi-stable; we simulate this by randomizing RAM contents
+ for(uint32 i=0; i<8192; i+=4)
+ {
+ *((uint32 *)(&dsp_ram_8[i])) = rand();
+ }
}
void DSPDumpDisassembly(void)
WriteLog("\n---[DSP code at 00F1B000]---------------------------\n");
uint32 j = 0xF1B000;
+
while (j <= 0xF1CFFF)
{
uint32 oldj = j;
//Shoud add modulus, etc to dump here...
WriteLog("\n---[DSP flags: NCZ %d%d%d, DSP PC: %08X]------------\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_pc);
WriteLog("\nRegisters bank 0\n");
+
for(int j=0; j<8; j++)
{
WriteLog("\tR%02i = %08X R%02i = %08X R%02i = %08X R%02i = %08X\n",
(j << 2) + 2, dsp_reg_bank_0[(j << 2) + 2],
(j << 2) + 3, dsp_reg_bank_0[(j << 2) + 3]);
}
+
WriteLog("Registers bank 1\n");
+
for(int j=0; j<8; j++)
{
WriteLog("\tR%02i = %08X R%02i = %08X R%02i = %08X R%02i = %08X\n",
void DSPDone(void)
{
int i, j;
- WriteLog("DSP: Stopped at PC=%08X dsp_modulo=%08X (dsp %s running)\n", dsp_pc, dsp_modulo, (DSP_RUNNING ? "was" : "wasn't"));
+ WriteLog("DSP: Stopped at PC=%08X dsp_modulo=%08X (dsp was%s running)\n", dsp_pc, dsp_modulo, (DSP_RUNNING ? "" : "n't"));
WriteLog("DSP: %sin interrupt handler\n", (dsp_flags & IMASK ? "" : "not "));
- // get the active interrupt bits
+ // get the active interrupt bits
int bits = ((dsp_control >> 10) & 0x20) | ((dsp_control >> 6) & 0x1F);
- // get the interrupt mask
+ // get the interrupt mask
int mask = ((dsp_flags >> 11) & 0x20) | ((dsp_flags >> 4) & 0x1F);
- WriteLog("DSP: pending=%08X enabled=%08X\n", bits, mask);
+ WriteLog("DSP: pending=$%X enabled=$%X (%s%s%s%s%s%s)\n", bits, mask,
+ (mask & 0x01 ? "CPU " : ""), (mask & 0x02 ? "I2S " : ""),
+ (mask & 0x04 ? "Timer0 " : ""), (mask & 0x08 ? "Timer1 " : ""),
+ (mask & 0x10 ? "Ext0 " : ""), (mask & 0x20 ? "Ext1" : ""));
WriteLog("\nRegisters bank 0\n");
+
for(int j=0; j<8; j++)
{
- WriteLog("\tr%2i=0x%.8x r%2i=0x%.8x r%2i=0x%.8x r%2i=0x%.8x\n",
+ WriteLog("\tR%02i=%08X R%02i=%08X R%02i=%08X R%02i=%08X\n",
(j << 2) + 0, dsp_reg_bank_0[(j << 2) + 0],
(j << 2) + 1, dsp_reg_bank_0[(j << 2) + 1],
(j << 2) + 2, dsp_reg_bank_0[(j << 2) + 2],
(j << 2) + 3, dsp_reg_bank_0[(j << 2) + 3]);
}
+
WriteLog("\nRegisters bank 1\n");
+
for (j=0; j<8; j++)
{
- WriteLog("\tr%2i=0x%.8x r%2i=0x%.8x r%2i=0x%.8x r%2i=0x%.8x\n",
+ WriteLog("\tR%02i=%08X R%02i=%08X R%02i=%08X R%02i=%08X\n",
(j << 2) + 0, dsp_reg_bank_1[(j << 2) + 0],
(j << 2) + 1, dsp_reg_bank_1[(j << 2) + 1],
(j << 2) + 2, dsp_reg_bank_1[(j << 2) + 2],
(j << 2) + 3, dsp_reg_bank_1[(j << 2) + 3]);
-
}
+ WriteLog("\n");
+
static char buffer[512];
j = DSP_WORK_RAM_BASE;
- while (j <= 0xF1BFFF)
+
+ while (j <= 0xF1CFFF)
{
uint32 oldj = j;
j += dasmjag(JAGUAR_DSP, buffer, j);
}//*/
WriteLog("DSP opcodes use:\n");
+
for (i=0;i<64;i++)
{
if (dsp_opcode_use[i])
WriteLog("\t%s %i\n", dsp_opcode_str[i], dsp_opcode_use[i]);
}//*/
- memory_free(dsp_ram_8);
+// memory_free(dsp_ram_8);
+// memory_free(dsp_reg_bank_0);
+// memory_free(dsp_reg_bank_1);
+// if (dsp_branch_condition_table)
+// free(dsp_branch_condition_table);
+
+// if (mirror_table)
+// free(mirror_table);
+}
+
+
+
+//
+// DSP comparison core...
+//
+#ifdef DSP_DEBUG_CC
+static uint16 lastExec;
+void DSPExecComp(int32 cycles)
+{
+ while (cycles > 0 && DSP_RUNNING)
+ {
+ // Load up vars for non-pipelined core
+ memcpy(dsp_ram_8, ram1, 0x2000);
+ memcpy(dsp_reg_bank_0, regs1, 32 * 4);
+ memcpy(dsp_reg_bank_1, ®s1[32], 32 * 4);
+ dsp_pc = ctrl1[0];
+ dsp_acc = ctrl1[1];
+ dsp_remain = ctrl1[2];
+ dsp_modulo = ctrl1[3];
+ dsp_flags = ctrl1[4];
+ dsp_matrix_control = ctrl1[5];
+ dsp_pointer_to_matrix = ctrl1[6];
+ dsp_data_organization = ctrl1[7];
+ dsp_control = ctrl1[8];
+ dsp_div_control = ctrl1[9];
+ IMASKCleared = ctrl1[10];
+ dsp_flag_z = ctrl1[11];
+ dsp_flag_n = ctrl1[12];
+ dsp_flag_c = ctrl1[13];
+DSPUpdateRegisterBanks();
+
+ // Decrement cycles based on non-pipelined core...
+ uint16 instr1 = DSPReadWord(dsp_pc, DSP);
+ cycles -= dsp_opcode_cycles[instr1 >> 10];
+
+//WriteLog("\tAbout to execute non-pipelined core on tick #%u (DSP_PC=%08X)...\n", (uint32)count, dsp_pc);
+ DSPExec(1); // Do *one* instruction
+
+ // Save vars
+ memcpy(ram1, dsp_ram_8, 0x2000);
+ memcpy(regs1, dsp_reg_bank_0, 32 * 4);
+ memcpy(®s1[32], dsp_reg_bank_1, 32 * 4);
+ ctrl1[0] = dsp_pc;
+ ctrl1[1] = dsp_acc;
+ ctrl1[2] = dsp_remain;
+ ctrl1[3] = dsp_modulo;
+ ctrl1[4] = dsp_flags;
+ ctrl1[5] = dsp_matrix_control;
+ ctrl1[6] = dsp_pointer_to_matrix;
+ ctrl1[7] = dsp_data_organization;
+ ctrl1[8] = dsp_control;
+ ctrl1[9] = dsp_div_control;
+ ctrl1[10] = IMASKCleared;
+ ctrl1[11] = dsp_flag_z;
+ ctrl1[12] = dsp_flag_n;
+ ctrl1[13] = dsp_flag_c;
+
+ // Load up vars for pipelined core
+ memcpy(dsp_ram_8, ram2, 0x2000);
+ memcpy(dsp_reg_bank_0, regs2, 32 * 4);
+ memcpy(dsp_reg_bank_1, ®s2[32], 32 * 4);
+ dsp_pc = ctrl2[0];
+ dsp_acc = ctrl2[1];
+ dsp_remain = ctrl2[2];
+ dsp_modulo = ctrl2[3];
+ dsp_flags = ctrl2[4];
+ dsp_matrix_control = ctrl2[5];
+ dsp_pointer_to_matrix = ctrl2[6];
+ dsp_data_organization = ctrl2[7];
+ dsp_control = ctrl2[8];
+ dsp_div_control = ctrl2[9];
+ IMASKCleared = ctrl2[10];
+ dsp_flag_z = ctrl2[11];
+ dsp_flag_n = ctrl2[12];
+ dsp_flag_c = ctrl2[13];
+DSPUpdateRegisterBanks();
+
+//WriteLog("\tAbout to execute pipelined core on tick #%u (DSP_PC=%08X)...\n", (uint32)count, dsp_pc);
+ DSPExecP2(1); // Do *one* instruction
+
+ // Save vars
+ memcpy(ram2, dsp_ram_8, 0x2000);
+ memcpy(regs2, dsp_reg_bank_0, 32 * 4);
+ memcpy(®s2[32], dsp_reg_bank_1, 32 * 4);
+ ctrl2[0] = dsp_pc;
+ ctrl2[1] = dsp_acc;
+ ctrl2[2] = dsp_remain;
+ ctrl2[3] = dsp_modulo;
+ ctrl2[4] = dsp_flags;
+ ctrl2[5] = dsp_matrix_control;
+ ctrl2[6] = dsp_pointer_to_matrix;
+ ctrl2[7] = dsp_data_organization;
+ ctrl2[8] = dsp_control;
+ ctrl2[9] = dsp_div_control;
+ ctrl2[10] = IMASKCleared;
+ ctrl2[11] = dsp_flag_z;
+ ctrl2[12] = dsp_flag_n;
+ ctrl2[13] = dsp_flag_c;
+
+ if (instr1 != lastExec)
+ {
+// WriteLog("\nCores diverged at instruction tick #%u!\nAttemping to synchronize...\n\n", count);
+
+// uint32 ppc = ctrl2[0] - (pipeline[plPtrExec].opcode == 38 ? 6 : (pipeline[plPtrExec].opcode == PIPELINE_STALL ? 0 : 2)) - (pipeline[plPtrWrite].opcode == 38 ? 6 : (pipeline[plPtrWrite].opcode == PIPELINE_STALL ? 0 : 2));
+//WriteLog("[DSP_PC1=%08X, DSP_PC2=%08X]\n", ctrl1[0], ppc);
+// if (ctrl1[0] < ppc) // P ran ahead of NP
+//How to test this crap???
+// if (1)
+ {
+ DSPExecP2(1); // Do one more instruction
+
+ // Save vars
+ memcpy(ram2, dsp_ram_8, 0x2000);
+ memcpy(regs2, dsp_reg_bank_0, 32 * 4);
+ memcpy(®s2[32], dsp_reg_bank_1, 32 * 4);
+ ctrl2[0] = dsp_pc;
+ ctrl2[1] = dsp_acc;
+ ctrl2[2] = dsp_remain;
+ ctrl2[3] = dsp_modulo;
+ ctrl2[4] = dsp_flags;
+ ctrl2[5] = dsp_matrix_control;
+ ctrl2[6] = dsp_pointer_to_matrix;
+ ctrl2[7] = dsp_data_organization;
+ ctrl2[8] = dsp_control;
+ ctrl2[9] = dsp_div_control;
+ ctrl2[10] = IMASKCleared;
+ ctrl2[11] = dsp_flag_z;
+ ctrl2[12] = dsp_flag_n;
+ ctrl2[13] = dsp_flag_c;
+ }
+// else // NP ran ahead of P
+ if (instr1 != lastExec) // Must be the other way...
+
+ {
+ // Load up vars for non-pipelined core
+ memcpy(dsp_ram_8, ram1, 0x2000);
+ memcpy(dsp_reg_bank_0, regs1, 32 * 4);
+ memcpy(dsp_reg_bank_1, ®s1[32], 32 * 4);
+ dsp_pc = ctrl1[0];
+ dsp_acc = ctrl1[1];
+ dsp_remain = ctrl1[2];
+ dsp_modulo = ctrl1[3];
+ dsp_flags = ctrl1[4];
+ dsp_matrix_control = ctrl1[5];
+ dsp_pointer_to_matrix = ctrl1[6];
+ dsp_data_organization = ctrl1[7];
+ dsp_control = ctrl1[8];
+ dsp_div_control = ctrl1[9];
+ IMASKCleared = ctrl1[10];
+ dsp_flag_z = ctrl1[11];
+ dsp_flag_n = ctrl1[12];
+ dsp_flag_c = ctrl1[13];
+DSPUpdateRegisterBanks();
+
+for(int k=0; k<2; k++)
+{
+ // Decrement cycles based on non-pipelined core...
+ instr1 = DSPReadWord(dsp_pc, DSP);
+ cycles -= dsp_opcode_cycles[instr1 >> 10];
+
+//WriteLog("\tAbout to execute non-pipelined core on tick #%u (DSP_PC=%08X)...\n", (uint32)count, dsp_pc);
+ DSPExec(1); // Do *one* instruction
+}
+
+ // Save vars
+ memcpy(ram1, dsp_ram_8, 0x2000);
+ memcpy(regs1, dsp_reg_bank_0, 32 * 4);
+ memcpy(®s1[32], dsp_reg_bank_1, 32 * 4);
+ ctrl1[0] = dsp_pc;
+ ctrl1[1] = dsp_acc;
+ ctrl1[2] = dsp_remain;
+ ctrl1[3] = dsp_modulo;
+ ctrl1[4] = dsp_flags;
+ ctrl1[5] = dsp_matrix_control;
+ ctrl1[6] = dsp_pointer_to_matrix;
+ ctrl1[7] = dsp_data_organization;
+ ctrl1[8] = dsp_control;
+ ctrl1[9] = dsp_div_control;
+ ctrl1[10] = IMASKCleared;
+ ctrl1[11] = dsp_flag_z;
+ ctrl1[12] = dsp_flag_n;
+ ctrl1[13] = dsp_flag_c;
+ }
+ }
+
+ if (instr1 != lastExec)
+ {
+ WriteLog("\nCores diverged at instruction tick #%u!\nStopped!\n\n", count);
+
+ WriteLog("Instruction for non-pipelined core: %04X\n", instr1);
+ WriteLog("Instruction for pipelined core: %04X\n", lastExec);
+
+ log_done();
+ exit(1);
+ }
+
+ count++;
+ }
}
+#endif
+
//
// DSP execution core
//
-static bool R20Set = false, tripwire = false;
-static uint32 pcQueue[32], ptrPCQ = 0;
+//static bool R20Set = false, tripwire = false;
+//static uint32 pcQueue[32], ptrPCQ = 0;
void DSPExec(int32 cycles)
{
/*HACKS!!! -> if (cycles != 1 && jaguar_mainRom_crc32 == 0xba74c3ed)
while (cycles > 0 && DSP_RUNNING)
{
+/*extern uint32 totalFrames;
+//F1B2F6: LOAD (R14+$04), R24 [NCZ:001, R14+$04=00F20018, R24=FFFFFFFF] -> Jaguar: Unknown word read at 00F20018 by DSP (M68K PC=00E32E)
+//-> 43 + 1 + 24 -> $2B + $01 + $18 -> 101011 00001 11000 -> 1010 1100 0011 1000 -> AC38
+//C470 -> 1100 0100 0111 0000 -> 110001 00011 10000 -> 49, 3, 16 -> STORE R16, (R14+$0C)
+//F1B140:
+if (totalFrames >= 377 && GET16(dsp_ram_8, 0x0002F6) == 0xAC38 && dsp_pc == 0xF1B140)
+{
+ doDSPDis = true;
+ WriteLog("Starting disassembly at frame #%u...\n", totalFrames);
+}
+if (dsp_pc == 0xF1B092)
+ doDSPDis = false;//*/
+/*if (dsp_pc == 0xF1B140)
+ doDSPDis = true;//*/
+
+ if (IMASKCleared) // If IMASK was cleared,
+ {
+#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Finished interrupt.\n");
+#endif
+ DSPHandleIRQsNP(); // See if any other interrupts are pending!
+ IMASKCleared = false;
+ }
+
/*if (badWrite)
{
WriteLog("\nDSP: Encountered bad write in Atari Synth module. PC=%08X, R15=%08X\n", dsp_pc, dsp_reg[15]);
static void dsp_opcode_jump(void)
{
#ifdef DSP_DIS_JUMP
-char * condition[32] =
+const char * condition[32] =
{ "T", "nz", "z", "???", "nc", "nc nz", "nc z", "???", "c", "c nz",
"c z", "???", "???", "???", "???", "???", "???", "???", "???",
"???", "nn", "nn nz", "nn z", "???", "n", "n nz", "n z", "???",
static void dsp_opcode_jr(void)
{
#ifdef DSP_DIS_JR
-char * condition[32] =
+const char * condition[32] =
{ "T", "nz", "z", "???", "nc", "nc nz", "nc z", "???", "c", "c nz",
"c z", "???", "???", "???", "???", "???", "???", "???", "???",
"???", "nn", "nn nz", "nn z", "???", "n", "n nz", "n z", "???",
if (doDSPDis)
WriteLog("%06X: ADD R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
- UINT32 res = RN + RM;
+ uint32 res = RN + RM;
SET_ZNC_ADD(RN, RM, res);
RN = res;
#ifdef DSP_DIS_ADD
if (doDSPDis)
WriteLog("%06X: ADDC R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
- UINT32 res = RN + RM + dsp_flag_c;
- UINT32 carry = dsp_flag_c;
+ uint32 res = RN + RM + dsp_flag_c;
+ uint32 carry = dsp_flag_c;
// SET_ZNC_ADD(RN, RM, res); //???BUG??? Yes!
SET_ZNC_ADD(RN + carry, RM, res);
// SET_ZNC_ADD(RN, RM + carry, res);
if (doDSPDis)
WriteLog("%06X: ADDQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 r1 = dsp_convert_zero[IMM_1];
- UINT32 res = RN + r1;
+ uint32 r1 = dsp_convert_zero[IMM_1];
+ uint32 res = RN + r1;
CLR_ZNC; SET_ZNC_ADD(RN, r1, res);
RN = res;
#ifdef DSP_DIS_ADDQ
if (doDSPDis)
WriteLog("%06X: SUB R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
- UINT32 res = RN - RM;
+ uint32 res = RN - RM;
SET_ZNC_SUB(RN, RM, res);
RN = res;
#ifdef DSP_DIS_SUB
if (doDSPDis)
WriteLog("%06X: SUBC R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
- UINT32 res = RN - RM - dsp_flag_c;
- UINT32 borrow = dsp_flag_c;
+ uint32 res = RN - RM - dsp_flag_c;
+ uint32 borrow = dsp_flag_c;
SET_ZNC_SUB(RN - borrow, RM, res);
RN = res;
#ifdef DSP_DIS_SUBC
if (doDSPDis)
WriteLog("%06X: SUBQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 r1 = dsp_convert_zero[IMM_1];
- UINT32 res = RN - r1;
+ uint32 r1 = dsp_convert_zero[IMM_1];
+ uint32 res = RN - r1;
SET_ZNC_SUB(RN, r1, res);
RN = res;
#ifdef DSP_DIS_SUBQ
if (doDSPDis)
WriteLog("%06X: CMP R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
- UINT32 res = RN - RM;
+ uint32 res = RN - RM;
SET_ZNC_SUB(RN, RM, res);
#ifdef DSP_DIS_CMP
if (doDSPDis)
if (doDSPDis)
WriteLog("%06X: CMPQ #%d, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, sqtable[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 r1 = sqtable[IMM_1 & 0x1F]; // I like this better -> (INT8)(jaguar.op >> 2) >> 3;
- UINT32 res = RN - r1;
+ uint32 r1 = sqtable[IMM_1 & 0x1F]; // I like this better -> (INT8)(jaguar.op >> 2) >> 3;
+ uint32 res = RN - r1;
SET_ZNC_SUB(RN, r1, res);
#ifdef DSP_DIS_CMPQ
if (doDSPDis)
{
#ifdef DSP_DIS_NOT
if (doDSPDis)
- WriteLog("%06X: NOT R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
+ WriteLog("%06X: NOT R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
RN = ~RN;
SET_ZN(RN);
#ifdef DSP_DIS_NOT
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
}
if (doDSPDis)
WriteLog("%06X: STORE R%02u, (R14+$%02X) [NCZ:%u%u%u, R%02u=%08X, R14+$%02X=%08X]\n", dsp_pc-2, IMM_2, dsp_convert_zero[IMM_1] << 2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN, dsp_convert_zero[IMM_1] << 2, dsp_reg[14]+(dsp_convert_zero[IMM_1] << 2));
#endif
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ DSPWriteLong((dsp_reg[14] & 0xFFFFFFFC) + (dsp_convert_zero[IMM_1] << 2), RN, DSP);
+#else
DSPWriteLong(dsp_reg[14] + (dsp_convert_zero[IMM_1] << 2), RN, DSP);
+#endif
}
static void dsp_opcode_store_r15_indexed(void)
if (doDSPDis)
WriteLog("%06X: STORE R%02u, (R15+$%02X) [NCZ:%u%u%u, R%02u=%08X, R15+$%02X=%08X]\n", dsp_pc-2, IMM_2, dsp_convert_zero[IMM_1] << 2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN, dsp_convert_zero[IMM_1] << 2, dsp_reg[15]+(dsp_convert_zero[IMM_1] << 2));
#endif
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ DSPWriteLong((dsp_reg[15] & 0xFFFFFFFC) + (dsp_convert_zero[IMM_1] << 2), RN, DSP);
+#else
DSPWriteLong(dsp_reg[15] + (dsp_convert_zero[IMM_1] << 2), RN, DSP);
+#endif
}
static void dsp_opcode_load_r14_ri(void)
if (doDSPDis)
WriteLog("%06X: LOAD (R14+R%02u), R%02u [NCZ:%u%u%u, R14+R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM+dsp_reg[14], IMM_2, RN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ RN = DSPReadLong((dsp_reg[14] + RM) & 0xFFFFFFFC, DSP);
+#else
RN = DSPReadLong(dsp_reg[14] + RM, DSP);
+#endif
#ifdef DSP_DIS_LOAD14R
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
if (doDSPDis)
WriteLog("%06X: LOAD (R15+R%02u), R%02u [NCZ:%u%u%u, R15+R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM+dsp_reg[15], IMM_2, RN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ RN = DSPReadLong((dsp_reg[15] + RM) & 0xFFFFFFFC, DSP);
+#else
RN = DSPReadLong(dsp_reg[15] + RM, DSP);
+#endif
#ifdef DSP_DIS_LOAD15R
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
if (doDSPDis)
WriteLog("%06X: STOREW R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_pc-2, IMM_2, IMM_1, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN, IMM_1, RM);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ if (RM >= DSP_WORK_RAM_BASE && RM <= (DSP_WORK_RAM_BASE + 0x1FFF))
+ DSPWriteLong(RM & 0xFFFFFFFE, RN & 0xFFFF, DSP);
+ else
+ JaguarWriteWord(RM & 0xFFFFFFFE, RN, DSP);
+#else
if (RM >= DSP_WORK_RAM_BASE && RM <= (DSP_WORK_RAM_BASE + 0x1FFF))
DSPWriteLong(RM, RN & 0xFFFF, DSP);
else
JaguarWriteWord(RM, RN, DSP);
+#endif
}
static void dsp_opcode_store(void)
if (doDSPDis)
WriteLog("%06X: STORE R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_pc-2, IMM_2, IMM_1, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN, IMM_1, RM);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ DSPWriteLong(RM & 0xFFFFFFFC, RN, DSP);
+#else
DSPWriteLong(RM, RN, DSP);
+#endif
}
static void dsp_opcode_loadb(void)
if (doDSPDis)
WriteLog("%06X: LOADW (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ if (RM >= DSP_WORK_RAM_BASE && RM <= (DSP_WORK_RAM_BASE + 0x1FFF))
+ RN = DSPReadLong(RM & 0xFFFFFFFE, DSP) & 0xFFFF;
+ else
+ RN = JaguarReadWord(RM & 0xFFFFFFFE, DSP);
+#else
if (RM >= DSP_WORK_RAM_BASE && RM <= (DSP_WORK_RAM_BASE + 0x1FFF))
RN = DSPReadLong(RM, DSP) & 0xFFFF;
else
RN = JaguarReadWord(RM, DSP);
+#endif
#ifdef DSP_DIS_LOADW
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
if (doDSPDis)
WriteLog("%06X: LOAD (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ RN = DSPReadLong(RM & 0xFFFFFFFC, DSP);
+#else
RN = DSPReadLong(RM, DSP);
+#endif
#ifdef DSP_DIS_LOAD
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
if (doDSPDis)
WriteLog("%06X: LOAD (R14+$%02X), R%02u [NCZ:%u%u%u, R14+$%02X=%08X, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1] << 2, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_convert_zero[IMM_1] << 2, dsp_reg[14]+(dsp_convert_zero[IMM_1] << 2), IMM_2, RN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ RN = DSPReadLong((dsp_reg[14] & 0xFFFFFFFC) + (dsp_convert_zero[IMM_1] << 2), DSP);
+#else
RN = DSPReadLong(dsp_reg[14] + (dsp_convert_zero[IMM_1] << 2), DSP);
+#endif
#ifdef DSP_DIS_LOAD14I
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
if (doDSPDis)
WriteLog("%06X: LOAD (R15+$%02X), R%02u [NCZ:%u%u%u, R15+$%02X=%08X, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1] << 2, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_convert_zero[IMM_1] << 2, dsp_reg[15]+(dsp_convert_zero[IMM_1] << 2), IMM_2, RN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ RN = DSPReadLong((dsp_reg[15] & 0xFFFFFFFC) + (dsp_convert_zero[IMM_1] << 2), DSP);
+#else
RN = DSPReadLong(dsp_reg[15] + (dsp_convert_zero[IMM_1] << 2), DSP);
+#endif
#ifdef DSP_DIS_LOAD15I
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
if (doDSPDis)
WriteLog("%06X: BCLR #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 res = RN & ~(1 << IMM_1);
+ uint32 res = RN & ~(1 << IMM_1);
RN = res;
SET_ZN(res);
#ifdef DSP_DIS_BCLR
if (doDSPDis)
WriteLog("%06X: BSET #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 res = RN | (1 << IMM_1);
+ uint32 res = RN | (1 << IMM_1);
RN = res;
SET_ZN(res);
#ifdef DSP_DIS_BSET
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, DSP_ACC=%02X%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, (uint8)(dsp_acc >> 32), (uint32)(dsp_acc & 0xFFFFFFFF));
#endif
-}
+}
static void dsp_opcode_mtoi(void)
{
- RN = (((INT32)RM >> 8) & 0xFF800000) | (RM & 0x007FFFFF);
+ RN = (((int32)RM >> 8) & 0xFF800000) | (RM & 0x007FFFFF);
SET_ZN(RN);
}
static void dsp_opcode_mmult(void)
{
int count = dsp_matrix_control&0x0f;
- uint32 addr = dsp_pointer_to_matrix; // in the gpu ram
+ uint32 addr = dsp_pointer_to_matrix; // in the dsp ram
int64 accum = 0;
uint32 res;
if (!(dsp_matrix_control & 0x10))
{
for (int i = 0; i < count; i++)
- {
+ {
int16 a;
if (i&0x01)
a=(int16)((dsp_alternate_reg[dsp_opcode_first_parameter + (i>>1)]>>16)&0xffff);
static void dsp_opcode_abs(void)
{
+#ifdef DSP_DIS_ABS
+ if (doDSPDis)
+ WriteLog("%06X: ABS R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
+#endif
uint32 _Rn = RN;
uint32 res;
-
+
if (_Rn == 0x80000000)
dsp_flag_n = 1;
else
res = RN = (_Rn & 0x80000000 ? -_Rn : _Rn);
CLR_ZN; SET_Z(res);
}
+#ifdef DSP_DIS_ABS
+ if (doDSPDis)
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
+#endif
}
static void dsp_opcode_div(void)
if (doDSPDis)
WriteLog("%06X: NEG R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 res = -RN;
+ uint32 res = -RN;
SET_ZNC_SUB(0, RN, res);
RN = res;
#ifdef DSP_DIS_NEG
if (doDSPDis)
WriteLog("%06X: SHLQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, 32 - IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- INT32 r1 = 32 - IMM_1;
- UINT32 res = RN << r1;
+ int32 r1 = 32 - IMM_1;
+ uint32 res = RN << r1;
SET_ZN(res); dsp_flag_c = (RN >> 31) & 1;
RN = res;
#ifdef DSP_DIS_SHLQ
if (doDSPDis)
WriteLog("%06X: SHRQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- INT32 r1 = dsp_convert_zero[IMM_1];
- UINT32 res = RN >> r1;
+ int32 r1 = dsp_convert_zero[IMM_1];
+ uint32 res = RN >> r1;
SET_ZN(res); dsp_flag_c = RN & 1;
RN = res;
#ifdef DSP_DIS_SHRQ
if (doDSPDis)
WriteLog("%06X: ROR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, IMM_1, IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_1, RM, IMM_2, RN);
#endif
- UINT32 r1 = RM & 0x1F;
- UINT32 res = (RN >> r1) | (RN << (32 - r1));
+ uint32 r1 = RM & 0x1F;
+ uint32 res = (RN >> r1) | (RN << (32 - r1));
SET_ZN(res); dsp_flag_c = (RN >> 31) & 1;
RN = res;
#ifdef DSP_DIS_ROR
if (doDSPDis)
WriteLog("%06X: RORQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 r1 = dsp_convert_zero[IMM_1 & 0x1F];
- UINT32 r2 = RN;
- UINT32 res = (r2 >> r1) | (r2 << (32 - r1));
+ uint32 r1 = dsp_convert_zero[IMM_1 & 0x1F];
+ uint32 r2 = RN;
+ uint32 res = (r2 >> r1) | (r2 << (32 - r1));
RN = res;
SET_ZN(res); dsp_flag_c = (r2 >> 31) & 0x01;
#ifdef DSP_DIS_RORQ
if (doDSPDis)
WriteLog("%06X: SHARQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN);
#endif
- UINT32 res = (INT32)RN >> dsp_convert_zero[IMM_1];
+ uint32 res = (int32)RN >> dsp_convert_zero[IMM_1];
SET_ZN(res); dsp_flag_c = RN & 0x01;
RN = res;
#ifdef DSP_DIS_SHARQ
if (doDSPDis)
WriteLog("%06X: ADDQMOD #%u, R%02u [NCZ:%u%u%u, R%02u=%08X, DSP_MOD=%08X] -> ", dsp_pc-2, dsp_convert_zero[IMM_1], IMM_2, dsp_flag_n, dsp_flag_c, dsp_flag_z, IMM_2, RN, dsp_modulo);
#endif
- UINT32 r1 = dsp_convert_zero[IMM_1];
- UINT32 r2 = RN;
- UINT32 res = r2 + r1;
+ uint32 r1 = dsp_convert_zero[IMM_1];
+ uint32 r2 = RN;
+ uint32 res = r2 + r1;
res = (res & (~dsp_modulo)) | (r2 & dsp_modulo);
RN = res;
SET_ZNC_ADD(r2, r1, res);
#endif
}
-void dsp_opcode_subqmod(void)
+void dsp_opcode_subqmod(void)
{
- UINT32 r1 = dsp_convert_zero[IMM_1];
- UINT32 r2 = RN;
- UINT32 res = r2 - r1;
+ uint32 r1 = dsp_convert_zero[IMM_1];
+ uint32 r2 = RN;
+ uint32 res = r2 - r1;
res = (res & (~dsp_modulo)) | (r2 & dsp_modulo);
RN = res;
-
+
SET_ZNC_SUB(r2, r1, res);
}
-void dsp_opcode_mirror(void)
+void dsp_opcode_mirror(void)
{
- UINT32 r1 = RN;
+ uint32 r1 = RN;
RN = (mirror_table[r1 & 0xFFFF] << 16) | mirror_table[r1 >> 16];
SET_ZN(RN);
}
-void dsp_opcode_sat32s(void)
+void dsp_opcode_sat32s(void)
{
- INT32 r2 = (UINT32)RN;
- INT32 temp = dsp_acc >> 32;
- UINT32 res = (temp < -1) ? (INT32)0x80000000 : (temp > 0) ? (INT32)0x7FFFFFFF : r2;
+ int32 r2 = (uint32)RN;
+ int32 temp = dsp_acc >> 32;
+ uint32 res = (temp < -1) ? (int32)0x80000000 : (temp > 0) ? (int32)0x7FFFFFFF : r2;
RN = res;
SET_ZN(res);
}
-void dsp_opcode_sat16s(void)
+void dsp_opcode_sat16s(void)
{
- INT32 r2 = RN;
- UINT32 res = (r2 < -32768) ? -32768 : (r2 > 32767) ? 32767 : r2;
+ int32 r2 = RN;
+ uint32 res = (r2 < -32768) ? -32768 : (r2 > 32767) ? 32767 : r2;
RN = res;
SET_ZN(res);
}
static void DSP_add(void);
static void DSP_addc(void);
static void DSP_addq(void);
-static void DSP_addqmod(void);
+static void DSP_addqmod(void);
static void DSP_addqt(void);
static void DSP_and(void);
static void DSP_bclr(void);
static void DSP_load_r14_r(void);
static void DSP_load_r15_i(void);
static void DSP_load_r15_r(void);
-static void DSP_mirror(void);
+static void DSP_mirror(void);
static void DSP_mmult(void);
static void DSP_move(void);
static void DSP_movefa(void);
static void DSP_resmac(void);
static void DSP_ror(void);
static void DSP_rorq(void);
-static void DSP_sat16s(void);
-static void DSP_sat32s(void);
+static void DSP_sat16s(void);
+static void DSP_sat32s(void);
static void DSP_sh(void);
static void DSP_sha(void);
static void DSP_sharq(void);
static void DSP_sub(void);
static void DSP_subc(void);
static void DSP_subq(void);
-static void DSP_subqmod(void);
+static void DSP_subqmod(void);
static void DSP_subqt(void);
static void DSP_xor(void);
void (* DSPOpcode[64])() =
-{
+{
DSP_add, DSP_addc, DSP_addq, DSP_addqt,
DSP_sub, DSP_subc, DSP_subq, DSP_subqt,
DSP_neg, DSP_and, DSP_or, DSP_xor,
{ true, true}, { true, true}, {false, false}, {false, true}
};
-bool affectsScoreboard[64] =
+bool isLoadStore[65] =
{
- true, true, true, true,
- true, true, true, true,
- true, true, true, true,
- true, false, true, true,
+ false, false, false, false, false, false, false, false,
+ false, false, false, false, false, false, false, false,
- true, true, false, true,
- false, true, true, true,
- true, true, true, true,
- true, true, false, false,
+ false, false, false, false, false, false, false, false,
+ false, false, false, false, false, false, false, false,
- true, true, true, true,
- false, true, true, true,
- true, true, true, true,
- true, false, false, false,
-
- true, false, false, true,
- false, false, true, true,
- true, false, true, true,
- false, false, false, true
-};
-
-// Pipeline structures
+ false, false, false, false, false, false, false, true,
+ true, true, false, true, true, true, true, true,
-struct PipelineStage
-{
- uint16 instruction;
- uint8 opcode, operand1, operand2;
- uint32 reg1, reg2, areg1, areg2;
- uint32 result;
- uint8 writebackRegister;
+ false, true, true, false, false, false, false, false,
+ false, false, true, true, true, true, false, false, false
};
-bool scoreboard[32];
-
-uint8 plPtrFetch, plPtrRead, plPtrExec, plPtrWrite;
-
-#define PIPELINE_STALL 64 // Set to # of opcodes + 1
-
-PipelineStage pipeline[4];
-
void FlushDSPPipeline(void)
{
plPtrFetch = 3, plPtrRead = 2, plPtrExec = 1, plPtrWrite = 0;
pipeline[i].opcode = PIPELINE_STALL;
for(int i=0; i<32; i++)
- scoreboard[i] = false;
+ scoreboard[i] = 0;
}
//
// New pipelined DSP execution core
//
-void DSPExecP(int32 cycles)
+/*void DSPExecP(int32 cycles)
{
// bool inhibitFetch = false;
// Stage 2: Read registers
//Ok, stalls here depend on whether or not the instruction reads two registers or not
//and *which* register (1 or 2) is the one being read... !!! FIX !!!
- if ((/*scoreboard[pipeline[plPtrRead].operand1]
- ||*/ scoreboard[pipeline[plPtrRead].operand2])
+ if (scoreboard[pipeline[plPtrRead].operand2])
&& pipeline[plPtrRead].opcode != PIPELINE_STALL)
// We have a hit in the scoreboard, so we have to stall the pipeline...
{
if (pipeline[plPtrRead].opcode != PIPELINE_STALL)
// Shouldn't we be more selective with the register scoreboarding?
// Yes, we should. !!! FIX !!!
-// scoreboard[pipeline[plPtrRead].operand1]
- /*=*/ scoreboard[pipeline[plPtrRead].operand2] = true;
+ scoreboard[pipeline[plPtrRead].operand2] = true;
//Advance PC here??? Yes.
// dsp_pc += (pipeline[plPtrRead].opcode == 38 ? 6 : 2);
//This is a mangling of the pipeline stages, but what else to do???
dsp_pc += (pipeline[plPtrFetch].opcode == 38 ? 6 : 2);
}
-/*
-DSPExecP: Pipeline status (after stage 1)...
- F -> 52, 00, 00; r1=00000000, r2= 00000000, res=00000000, wb=0
- R -> 38, 00, 00; r1=00000000, r2= 00000000, res=00F1B034, wb=0
- E -> 64, 00, 00; r1=00000000, r2= 00000000, res=00000000, wb=0
- W -> 64, 00, 00; r1=00000000, r2= 00000000, res=00000000, wb=0
- --> Stalling pipeline: scoreboard = true
-DSPExecP: Pipeline status (after stage 2)...
- F -> 52, 00, 00; r1=00000000, r2= 00000000, res=00000000, wb=0
- R -> 64, 00, 00; r1=00000000, r2= 00000000, res=00F1B034, wb=0
- E -> 64, 00, 00; r1=00000000, r2= 00000000, res=00000000, wb=0
- W -> 64, 00, 00; r1=00000000, r2= 00000000, res=00000000, wb=0 */
-
WriteLog("DSPExecP: Pipeline status (after stage 2)...\n");
WriteLog("\tF -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrFetch].opcode, pipeline[plPtrFetch].operand1, pipeline[plPtrFetch].operand2, pipeline[plPtrFetch].reg1, pipeline[plPtrFetch].reg2, pipeline[plPtrFetch].result, pipeline[plPtrFetch].writebackRegister);
}
dsp_in_exec--;
-}
+}*/
+
+
+//Problems: JR and any other instruction that relies on DSP_PC is getting WRONG values!
+//!!! FIX !!!
+// Should be fixed now. Another problem is figuring how to do the sequence following
+// a branch followed with the JR & JUMP instructions...
+//
+// There are two conflicting problems:
+
+/*
+F1B236: LOAD (R31), R03 [NCZ:000, R31=00F1CFDC, R03=00F14000] -> [NCZ:000, R03=00F1B084]
+F1B238: BCLR #3, R00 [NCZ:000, R00=00004039] -> [NCZ:000, R00=00004031]
+F1B23A: ADDQ #2, R03 [NCZ:000, R03=00F1B084] -> [NCZ:000, R03=00F1B086]
+F1B23C: SUBQ #1, R17 [NCZ:000, R17=00000040] -> [NCZ:000, R17=0000003F]
+F1B23E: MOVEI #$00F1CFE0, R31 [NCZ:000, R31=00F1CFDC] -> [NCZ:000, R31=00F1CFE0]
+F1B244: JR z, F1B254 [NCZ:000] Branch NOT taken.
+F1B246: BSET #10, R00 [NCZ:000, R00=00004031] -> [NCZ:000, R00=00004431]
+F1B248: MOVEI #$00F1A100, R01 [NCZ:000, R01=00F1A148] -> [NCZ:000, R01=00F1A100]
+F1B24E: STORE R00, (R01) [NCZ:000, R00=00004431, R01=00F1A100]
+DSP: Writing 00004431 to DSP_FLAGS by DSP...
+DSP: Finished interrupt.
+; Without pipeline effects, the value in R03 is erroneously read from bank 1 instead of
+; bank 0 (where is was prepared)!
+F1B250: JUMP T, (R03) [NCZ:001, R03=00000000] Branched!
+F1B252: NOP [NCZ:001]
+*/
+
+// The other is when you see this at the end of an IRQ:
+
+/*
+JUMP T, (R29) ; R29 = Previous stack + 2
+STORE R28, (R30) ; R28 = Modified flags register, R30 = $F1A100
+
+; Actually, this is OK if we do the atomic JUMP/JR operation correctly:
+; 1) The STORE goes through the pipeline and is executed/written back
+; 2) The pipeline is flushed
+; 3) The DSP_PC is set to the new address
+; 4) Execution resumes
+
+JUMP T, (R25) ; Oops! Because of pipeline effects R25 has the value from
+ ; bank 0 instead of the current bank 1 and so goes astray!
+*/
+
+//One other thing: Since these stages are supposed to happen simulaneously, try executing
+//them in reverse order to see if that reduces pipeline stalls from late writebacks...
+/*
+Small problem here: The return address when INT0 comes up is $F1B088, but when INT1
+follows it, the JUMP out of the previous interrupt is bypassed immediately--this is
+because the STORE instruction writes back on stage #2 of the pipeline instead of stage #3...
+If it were done properly, the STORE write back would occur *after* (well, technically,
+during) the execution of the the JUMP that follows it.
+
+!!! FIX !!! [DONE]
+
+F1B08A: JR z, F1B082 [NCZ:001] Branched!
+F1B08A: NOP [NCZ:001]
+[STALL...]
+F1B080: MOVEI #$00F1B178, R00 [NCZ:001, R00=00F1B178] -> [NCZ:001, R00=00F1B178]
+[STALL...]
+[STALL...]
+F1B086: LOAD (R00), R01 [NCZ:001, R00=00F1B178, R01=00000000] -> [NCZ:001, R01=00000000]
+[STALL...]
+[STALL...]
+F1B088: OR R01, R01 [NCZ:001, R01=00000000, R01=00000000] -> [NCZ:001, R01=00000000, R01=00000000]
+F1B08A: JR z, F1B082 [NCZ:001] Branched!
+F1B08A: NOP [NCZ:001]
+[STALL...]
+F1B080: MOVEI #$00F1B178, R00 [NCZ:001, R00=00F1B178] -> [NCZ:001, R00=00F1B178]
+[STALL...]
+[STALL...]
+Write to DSP CTRL: 00002301 --> Starting to run at 00F1B088 by M68K...
+DSP: CPU -> DSP interrupt
+DSP: Generating interrupt #0... [PC will return to 00F1B088, R31 = 00F1CFE0]
+Write to DSP CTRL: 00000001 --> Starting to run at 00F1B000 by M68K...
+[STALL...]
+F1B000: MOVEI #$00F1B0D4, R30 [NCZ:001, R30=00F1B000] -> [NCZ:001, R30=00F1B0D4]
+[STALL...]
+[STALL...]
+F1B006: JUMP T, (R30) [NCZ:001, R30=00F1B0D4] Branched!
+F1B006: NOP [NCZ:001]
+[STALL...]
+F1B0D4: MOVEI #$00F1A100, R01 [NCZ:001, R01=00F1A100] -> [NCZ:001, R01=00F1A100]
+[STALL...]
+[STALL...]
+F1B0DA: LOAD (R01), R00 [NCZ:001, R01=00F1A100, R00=00004431] -> [NCZ:001, R00=00004039]
+F1B0DC: MOVEI #$00F1B0C8, R01 [NCZ:001, R01=00F1A100] -> [NCZ:001, R01=00F1B0C8]
+[STALL...]
+[STALL...]
+F1B0E2: LOAD (R01), R02 [NCZ:001, R01=00F1B0C8, R02=00000000] -> [NCZ:001, R02=00000001]
+F1B0E4: MOVEI #$00F1B0CC, R01 [NCZ:001, R01=00F1B0C8] -> [NCZ:001, R01=00F1B0CC]
+[STALL...]
+[STALL...]
+F1B0EA: LOAD (R01), R03 [NCZ:001, R01=00F1B0CC, R03=00F1B086] -> [NCZ:001, R03=00000064]
+F1B0EC: MOVEI #$00F1B0D0, R01 [NCZ:001, R01=00F1B0CC] -> [NCZ:001, R01=00F1B0D0]
+[STALL...]
+[STALL...]
+F1B0F2: LOAD (R01), R04 [NCZ:001, R01=00F1B0D0, R04=00000000] -> [NCZ:001, R04=00000008]
+F1B0F4: MOVEI #$00F1B0BC, R01 [NCZ:001, R01=00F1B0D0] -> [NCZ:001, R01=00F1B0BC]
+[STALL...]
+[STALL...]
+F1B0FA: ADD R04, R01 [NCZ:001, R04=00000008, R01=00F1B0BC] -> [NCZ:000, R04=00000008, R01=00F1B0C4]
+[STALL...]
+[STALL...]
+F1B0FC: LOAD (R01), R01 [NCZ:000, R01=00F1B0C4, R01=00F1B0C4] -> [NCZ:000, R01=00F1B12E]
+[STALL...]
+[STALL...]
+F1B0FE: JUMP T, (R01) [NCZ:000, R01=00F1B12E] Branched!
+F1B0FE: NOP [NCZ:000]
+[STALL...]
+F1B12E: MOVE R02, R08 [NCZ:000, R02=00000001, R08=00000000] -> [NCZ:000, R02=00000001, R08=00000001]
+[STALL...]
+[STALL...]
+F1B132: MOVEI #$00F1B102, R01 [NCZ:000, R01=00F1B12E] -> [NCZ:000, R01=00F1B102]
+[STALL...]
+[STALL...]
+F1B138: JUMP T, (R01) [NCZ:000, R01=00F1B102] Branched!
+F1B138: NOP [NCZ:000]
+[STALL...]
+F1B102: MOVEI #$00F1B0C8, R01 [NCZ:000, R01=00F1B102] -> [NCZ:000, R01=00F1B0C8]
+[STALL...]
+[STALL...]
+F1B108: STORE R08, (R01) [NCZ:000, R08=00000000, R01=00F1B0C8]
+F1B10A: MOVEI #$00F1B0D0, R01 [NCZ:000, R01=00F1B0C8] -> [NCZ:000, R01=00F1B0D0]
+F1B110: MOVEQ #0, R04 [NCZ:000, R04=00000008] -> [NCZ:000, R04=00000000]
+[STALL...]
+[STALL...]
+F1B112: STORE R04, (R01) [NCZ:000, R04=00000000, R01=00F1B0D0]
+F1B114: BCLR #3, R00 [NCZ:000, R00=00004039] -> [NCZ:000, R00=00004031]
+[STALL...]
+[STALL...]
+F1B116: BSET #9, R00 [NCZ:000, R00=00004031] -> [NCZ:000, R00=00004231]
+F1B118: LOAD (R31), R04 [NCZ:000, R31=00F1CFDC, R04=00000000] -> [NCZ:000, R04=00F1B086]
+F1B11A: MOVEI #$00F1CFE0, R31 [NCZ:000, R31=00F1CFDC] -> [NCZ:000, R31=00F1CFE0]
+[STALL...]
+F1B120: ADDQ #2, R04 [NCZ:000, R04=00F1B086] -> [NCZ:000, R04=00F1B088]
+F1B122: MOVEI #$00F1A100, R01 [NCZ:000, R01=00F1B0D0] -> [NCZ:000, R01=00F1A100]
+[STALL...]
+[STALL...]
+F1B128: STORE R00, (R01) [NCZ:000, R00=00004231, R01=00F1A100]
+DSP: Writing 00004231 to DSP_FLAGS by DSP (REGPAGE is set)...
+DSP: Finished interrupt.
+DSP: Generating interrupt #1... [PC will return to 00F1B12A, R31 = 00F1CFE0]
+[STALL...]
+F1B010: MOVEI #$00F1B1FC, R30 [NCZ:001, R30=00F1B010] -> [NCZ:001, R30=00F1B1FC]
+[STALL...]
+[STALL...]
+F1B016: JUMP T, (R30) [NCZ:001, R30=00F1B1FC] Branched!
+F1B016: NOP [NCZ:001]
+[STALL...]
+F1B1FC: MOVEI #$00F1A100, R01 [NCZ:001, R01=00F1A100] -> [NCZ:001, R01=00F1A100]
+*/
-#define DSP_DEBUG_PL2
+uint32 pcQueue1[0x400];
+uint32 pcQPtr1 = 0;
+static uint32 prevR1;
//Let's try a 3 stage pipeline....
+//Looks like 3 stage is correct, otherwise bad things happen...
void DSPExecP2(int32 cycles)
{
dsp_releaseTimeSlice_flag = 0;
while (cycles > 0 && DSP_RUNNING)
{
+/*extern uint32 totalFrames;
+//F1B2F6: LOAD (R14+$04), R24 [NCZ:001, R14+$04=00F20018, R24=FFFFFFFF] -> Jaguar: Unknown word read at 00F20018 by DSP (M68K PC=00E32E)
+//-> 43 + 1 + 24 -> $2B + $01 + $18 -> 101011 00001 11000 -> 1010 1100 0011 1000 -> AC38
+//C470 -> 1100 0100 0111 0000 -> 110001 00011 10000 -> 49, 3, 16 -> STORE R16, (R14+$0C)
+//F1B140:
+if (totalFrames >= 377 && GET16(dsp_ram_8, 0x0002F6) == 0xAC38 && dsp_pc == 0xF1B140)
+{
+ doDSPDis = true;
+ WriteLog("Starting disassembly at frame #%u...\n", totalFrames);
+}
+if (dsp_pc == 0xF1B092)
+ doDSPDis = false;//*/
+/*if (totalFrames >= 373 && GET16(dsp_ram_8, 0x0002F6) == 0xAC38)
+ doDSPDis = true;//*/
+/*if (totalFrames >= 373 && dsp_pc == 0xF1B0A0)
+ doDSPDis = true;//*/
+/*if (dsp_pc == 0xF1B0A0)
+ doDSPDis = true;//*/
+/*if (dsp_pc == 0xF1B0D2) && dsp_reg[1] == 0x2140C)
+ doDSPDis = true;//*/
+//Two parter... (not sure how to write this)
+//if (dsp_pc == 0xF1B0D2)
+// prevR1 = dsp_reg[1];
+
+//F1B0D2: ADDQT #8, R01 [NCZ:000, R01=0002140C] -> [NCZ:000, R01=00021414]
+//F1B0D2: ADDQT #8, R01 [NCZ:000, R01=0002140C] -> [NCZ:000, R01=00021414]
+
+
+pcQueue1[pcQPtr1++] = dsp_pc;
+pcQPtr1 &= 0x3FF;
+
#ifdef DSP_DEBUG_PL2
-WriteLog("DSPExecP: Pipeline status...\n");
-WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister);
-WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister);
-WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister);
+if ((dsp_pc < 0xF1B000 || dsp_pc > 0xF1CFFF) && !doDSPDis)
+{
+ WriteLog("DSP: PC has stepped out of bounds...\n\nBacktrace:\n\n");
+ doDSPDis = true;
+
+ char buffer[512];
+
+ for(int i=0; i<0x400; i++)
+ {
+ dasmjag(JAGUAR_DSP, buffer, pcQueue1[(i + pcQPtr1) & 0x3FF]);
+ WriteLog("\t%08X: %s\n", pcQueue1[(i + pcQPtr1) & 0x3FF], buffer);
+ }
+ WriteLog("\n");
+}//*/
+#endif
+
+ if (IMASKCleared) // If IMASK was cleared,
+ {
+#ifdef DSP_DEBUG_IRQ
+ WriteLog("DSP: Finished interrupt.\n");
+#endif
+ DSPHandleIRQs(); // See if any other interrupts are pending!
+ IMASKCleared = false;
+ }
+
+//if (dsp_flags & REGPAGE)
+// WriteLog(" --> REGPAGE has just been set!\n");
+#ifdef DSP_DEBUG_PL2
+if (doDSPDis)
+{
+WriteLog("DSPExecP: Pipeline status [PC=%08X]...\n", dsp_pc);
+WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister, dsp_opcode_str[pipeline[plPtrRead].opcode]);
+WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister, dsp_opcode_str[pipeline[plPtrExec].opcode]);
+WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister, dsp_opcode_str[pipeline[plPtrWrite].opcode]);
WriteLog(" --> Scoreboard: ");
for(int i=0; i<32; i++)
WriteLog("%s ", scoreboard[i] ? "T" : "F");
WriteLog("\n");
+}
#endif
// Stage 1a: Instruction fetch
pipeline[plPtrRead].instruction = DSPReadWord(dsp_pc, DSP);
pipeline[plPtrRead].result = (uint32)DSPReadWord(dsp_pc + 2, DSP)
| ((uint32)DSPReadWord(dsp_pc + 4, DSP) << 16);
#ifdef DSP_DEBUG_PL2
+if (doDSPDis)
+{
WriteLog("DSPExecP: Fetching instruction (%04X) from DSP_PC = %08X...\n", pipeline[plPtrRead].instruction, dsp_pc);
-WriteLog("DSPExecP: Pipeline status (after stage 1a)...\n");
-WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister);
-WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister);
-WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister);
+WriteLog("DSPExecP: Pipeline status (after stage 1a) [PC=%08X]...\n", dsp_pc);
+WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister, dsp_opcode_str[pipeline[plPtrRead].opcode]);
+WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister, dsp_opcode_str[pipeline[plPtrExec].opcode]);
+WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister, dsp_opcode_str[pipeline[plPtrWrite].opcode]);
+}
#endif
// Stage 1b: Read registers
- if (scoreboard[pipeline[plPtrRead].operand2])
+//Small problem--when say LOAD or STORE (R14/5+$nn) is executed AFTER an instruction that
+//modifies R14/5, we don't check the scoreboard for R14/5 (and we need to!)... !!! FIX !!!
+//Ugly, but [DONE]
+//Another problem: Any sequential combination of LOAD and STORE operations will cause the
+//pipeline to stall, and we don't take care of that here. !!! FIX !!!
+ if ((scoreboard[pipeline[plPtrRead].operand1] && readAffected[pipeline[plPtrRead].opcode][0])
+ || (scoreboard[pipeline[plPtrRead].operand2] && readAffected[pipeline[plPtrRead].opcode][1])
+ || ((pipeline[plPtrRead].opcode == 43 || pipeline[plPtrRead].opcode == 58) && scoreboard[14])
+ || ((pipeline[plPtrRead].opcode == 44 || pipeline[plPtrRead].opcode == 59) && scoreboard[15])
+//Not sure that this is the best way to fix the LOAD/STORE problem... But it seems to
+//work--somewhat...
+ || (isLoadStore[pipeline[plPtrRead].opcode] && isLoadStore[pipeline[plPtrExec].opcode]))
// We have a hit in the scoreboard, so we have to stall the pipeline...
#ifdef DSP_DEBUG_PL2
{
-WriteLog(" --> Stalling pipeline: scoreboard[%u] = %s\n", pipeline[plPtrRead].operand2, scoreboard[pipeline[plPtrRead].operand2] ? "true" : "false");
+if (doDSPDis)
+{
+WriteLog(" --> Stalling pipeline: ");
+if (readAffected[pipeline[plPtrRead].opcode][0])
+ WriteLog("scoreboard[%u] = %s (reg 1) ", pipeline[plPtrRead].operand1, scoreboard[pipeline[plPtrRead].operand1] ? "true" : "false");
+if (readAffected[pipeline[plPtrRead].opcode][1])
+ WriteLog("scoreboard[%u] = %s (reg 2)", pipeline[plPtrRead].operand2, scoreboard[pipeline[plPtrRead].operand2] ? "true" : "false");
+WriteLog("\n");
+}
#endif
pipeline[plPtrRead].opcode = PIPELINE_STALL;
#ifdef DSP_DEBUG_PL2
pipeline[plPtrRead].writebackRegister = pipeline[plPtrRead].operand2; // Set it to RN
// Shouldn't we be more selective with the register scoreboarding?
- // Yes, we should. !!! FIX !!! [Kinda DONE]
+ // Yes, we should. !!! FIX !!! Kinda [DONE]
+#ifndef NEW_SCOREBOARD
scoreboard[pipeline[plPtrRead].operand2] = affectsScoreboard[pipeline[plPtrRead].opcode];
+#else
+//Hopefully this will fix the dual MOVEQ # problem...
+ scoreboard[pipeline[plPtrRead].operand2] += (affectsScoreboard[pipeline[plPtrRead].opcode] ? 1 : 0);
+#endif
//Advance PC here??? Yes.
dsp_pc += (pipeline[plPtrRead].opcode == 38 ? 6 : 2);
}
#ifdef DSP_DEBUG_PL2
-WriteLog("DSPExecP: Pipeline status (after stage 1b)...\n");
-WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister);
-WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister);
-WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister);
+if (doDSPDis)
+{
+WriteLog("DSPExecP: Pipeline status (after stage 1b) [PC=%08X]...\n", dsp_pc);
+WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister, dsp_opcode_str[pipeline[plPtrRead].opcode]);
+WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister, dsp_opcode_str[pipeline[plPtrExec].opcode]);
+WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister, dsp_opcode_str[pipeline[plPtrWrite].opcode]);
+}
#endif
// Stage 2: Execute
if (pipeline[plPtrExec].opcode != PIPELINE_STALL)
{
#ifdef DSP_DEBUG_PL2
+if (doDSPDis)
+ WriteLog("\t[inst=%02u][R28=%08X, alt R28=%08X, REGPAGE=%s]\n", pipeline[plPtrExec].opcode, dsp_reg[28], dsp_alternate_reg[28], (dsp_flags & REGPAGE ? "set" : "not set"));
+
+if (doDSPDis)
+{
WriteLog("DSPExecP: About to execute opcode %s...\n", dsp_opcode_str[pipeline[plPtrExec].opcode]);
+}
+#endif
+//CC only!
+#ifdef DSP_DEBUG_CC
+lastExec = pipeline[plPtrExec].instruction;
+//WriteLog("[lastExec = %04X]\n", lastExec);
#endif
- DSPOpcode[pipeline[plPtrExec].opcode]();
- dsp_opcode_use[pipeline[plPtrExec].opcode]++;
cycles -= dsp_opcode_cycles[pipeline[plPtrExec].opcode];
+ dsp_opcode_use[pipeline[plPtrExec].opcode]++;
+ DSPOpcode[pipeline[plPtrExec].opcode]();
+//WriteLog(" --> Returned from execute. DSP_PC: %08X\n", dsp_pc);
}
else
- cycles--;
+{
+//Let's not, until we do the stalling correctly...
+//But, we gotta while we're doing the comparison core...!
+//Or do we? cycles--;
+//Really, the whole thing is wrong. When the pipeline is correctly stuffed, most instructions
+//will execute in one clock cycle (others, like DIV, will likely not). So, the challenge is
+//to model this clock cycle behavior correctly...
+//Also, the pipeline stalls too much--mostly because the transparent writebacks at stage 3
+//don't affect the reads at stage 1...
+#ifdef DSP_DEBUG_STALL
+if (doDSPDis)
+ WriteLog("[STALL... DSP_PC = %08X]\n", dsp_pc);
+#endif
+}
#ifdef DSP_DEBUG_PL2
-WriteLog("DSPExecP: Pipeline status (after stage 2)...\n");
-WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister);
-WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister);
-WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u \n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister);
+if (doDSPDis)
+{
+WriteLog("DSPExecP: Pipeline status (after stage 2) [PC=%08X]...\n", dsp_pc);
+WriteLog("\tR -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister, dsp_opcode_str[pipeline[plPtrRead].opcode]);
+WriteLog("\tE -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrExec].opcode, pipeline[plPtrExec].operand1, pipeline[plPtrExec].operand2, pipeline[plPtrExec].reg1, pipeline[plPtrExec].reg2, pipeline[plPtrExec].result, pipeline[plPtrExec].writebackRegister, dsp_opcode_str[pipeline[plPtrExec].opcode]);
+WriteLog("\tW -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrWrite].opcode, pipeline[plPtrWrite].operand1, pipeline[plPtrWrite].operand2, pipeline[plPtrWrite].reg1, pipeline[plPtrWrite].reg2, pipeline[plPtrWrite].result, pipeline[plPtrWrite].writebackRegister, dsp_opcode_str[pipeline[plPtrWrite].opcode]);
WriteLog("\n");
+}
#endif
- // Stage 3: Write back register
+ // Stage 3: Write back register/memory address
if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
{
+/*if (pipeline[plPtrWrite].writebackRegister == 3
+ && (pipeline[plPtrWrite].result < 0xF14000 || pipeline[plPtrWrite].result > 0xF1CFFF)
+ && !doDSPDis)
+{
+ WriteLog("DSP: Register R03 has stepped out of bounds...\n\n");
+ doDSPDis = true;
+}//*/
if (pipeline[plPtrWrite].writebackRegister != 0xFF)
- dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFE)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+ else
+ {
+ if (pipeline[plPtrWrite].type == TYPE_BYTE)
+ JaguarWriteByte(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else if (pipeline[plPtrWrite].type == TYPE_WORD)
+ JaguarWriteWord(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else
+ JaguarWriteLong(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ }
+ }
+#ifndef NEW_SCOREBOARD
if (affectsScoreboard[pipeline[plPtrWrite].opcode])
scoreboard[pipeline[plPtrWrite].operand2] = false;
+#else
+//Yup, sequential MOVEQ # problem fixing (I hope!)...
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ if (scoreboard[pipeline[plPtrWrite].operand2])
+ scoreboard[pipeline[plPtrWrite].operand2]--;
+#endif
}
// Push instructions through the pipeline...
}
-//Problems: JR and any other instruction that relies on DSP_PC is getting WRONG values!
-//!!! FIX !!!
-#define DSP_DEBUG_PL3
+/*
+//#define DSP_DEBUG_PL3
//Let's try a 2 stage pipeline....
void DSPExecP3(int32 cycles)
{
while (cycles > 0 && DSP_RUNNING)
{
+//if (dsp_pc < 0xF1B000 || dsp_pc > 0xF1CFFF)
+// doDSPDis = true;
#ifdef DSP_DEBUG_PL3
WriteLog("DSPExecP: Pipeline status...\n");
WriteLog("\tF/R -> %02u, %02u, %02u; r1=%08X, r2= %08X, res=%08X, wb=%u (%s)\n", pipeline[plPtrRead].opcode, pipeline[plPtrRead].operand1, pipeline[plPtrRead].operand2, pipeline[plPtrRead].reg1, pipeline[plPtrRead].reg2, pipeline[plPtrRead].result, pipeline[plPtrRead].writebackRegister, dsp_opcode_str[pipeline[plPtrRead].opcode]);
if ((scoreboard[pipeline[plPtrRead].operand1] && readAffected[pipeline[plPtrRead].opcode][0])
|| (scoreboard[pipeline[plPtrRead].operand2] && readAffected[pipeline[plPtrRead].opcode][1]))
// We have a hit in the scoreboard, so we have to stall the pipeline...
-#if 1//def DSP_DEBUG_PL3
+#ifdef DSP_DEBUG_PL3
{
WriteLog(" --> Stalling pipeline: ");
if (readAffected[pipeline[plPtrRead].opcode][0])
WriteLog("\n");
#endif
pipeline[plPtrRead].opcode = PIPELINE_STALL;
-#if 1//def DSP_DEBUG_PL3
+#ifdef DSP_DEBUG_PL3
}
#endif
else
// Push instructions through the pipeline...
plPtrRead = (++plPtrRead) & 0x03;
plPtrExec = (++plPtrExec) & 0x03;
-// plPtrWrite = (++plPtrWrite) & 0x03;
}
dsp_in_exec--;
-}
+}*/
//
// DSP pipelined opcode handlers
#define PRES pipeline[plPtrExec].result
#define PWBR pipeline[plPtrExec].writebackRegister
#define NO_WRITEBACK pipeline[plPtrExec].writebackRegister = 0xFF
+//#define DSP_PPC dsp_pc - (pipeline[plPtrRead].opcode == 38 ? 6 : 2) - (pipeline[plPtrExec].opcode == 38 ? 6 : 2)
+#define DSP_PPC dsp_pc - (pipeline[plPtrRead].opcode == 38 ? 6 : (pipeline[plPtrRead].opcode == PIPELINE_STALL ? 0 : 2)) - (pipeline[plPtrExec].opcode == 38 ? 6 : (pipeline[plPtrExec].opcode == PIPELINE_STALL ? 0 : 2))
+#define WRITEBACK_ADDR pipeline[plPtrExec].writebackRegister = 0xFE
static void DSP_abs(void)
{
+#ifdef DSP_DIS_ABS
+ if (doDSPDis)
+ WriteLog("%06X: ABS R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+#endif
uint32 _Rn = PRN;
-
+
if (_Rn == 0x80000000)
dsp_flag_n = 1;
else
PRES = (_Rn & 0x80000000 ? -_Rn : _Rn);
CLR_ZN; SET_Z(PRES);
}
+#ifdef DSP_DIS_ABS
+ if (doDSPDis)
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
+#endif
}
static void DSP_add(void)
{
#ifdef DSP_DIS_ADD
if (doDSPDis)
- WriteLog("%06X: ADD R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: ADD R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
- UINT32 res = PRN + PRM;
+ uint32 res = PRN + PRM;
SET_ZNC_ADD(PRN, PRM, res);
PRES = res;
#ifdef DSP_DIS_ADD
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_ADDC
if (doDSPDis)
- WriteLog("%06X: ADDC R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: ADDC R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
- UINT32 res = PRN + PRM + dsp_flag_c;
- UINT32 carry = dsp_flag_c;
+ uint32 res = PRN + PRM + dsp_flag_c;
+ uint32 carry = dsp_flag_c;
// SET_ZNC_ADD(PRN, PRM, res); //???BUG??? Yes!
SET_ZNC_ADD(PRN + carry, PRM, res);
// SET_ZNC_ADD(PRN, PRM + carry, res);
PRES = res;
#ifdef DSP_DIS_ADDC
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_ADDQ
if (doDSPDis)
- WriteLog("%06X: ADDQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: ADDQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- UINT32 r1 = dsp_convert_zero[PIMM1];
- UINT32 res = PRN + r1;
+ uint32 r1 = dsp_convert_zero[PIMM1];
+ uint32 res = PRN + r1;
CLR_ZNC; SET_ZNC_ADD(PRN, r1, res);
PRES = res;
#ifdef DSP_DIS_ADDQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_ADDQMOD
if (doDSPDis)
- WriteLog("%06X: ADDQMOD #%u, R%02u [NCZ:%u%u%u, R%02u=%08X, DSP_MOD=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, dsp_modulo);
+ WriteLog("%06X: ADDQMOD #%u, R%02u [NCZ:%u%u%u, R%02u=%08X, DSP_MOD=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, dsp_modulo);
#endif
- UINT32 r1 = dsp_convert_zero[PIMM1];
- UINT32 r2 = PRN;
- UINT32 res = r2 + r1;
+ uint32 r1 = dsp_convert_zero[PIMM1];
+ uint32 r2 = PRN;
+ uint32 res = r2 + r1;
res = (res & (~dsp_modulo)) | (r2 & dsp_modulo);
PRES = res;
SET_ZNC_ADD(r2, r1, res);
#ifdef DSP_DIS_ADDQMOD
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_ADDQT
if (doDSPDis)
- WriteLog("%06X: ADDQT #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: ADDQT #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
PRES = PRN + dsp_convert_zero[PIMM1];
#ifdef DSP_DIS_ADDQT
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_AND
if (doDSPDis)
- WriteLog("%06X: AND R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: AND R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
PRES = PRN & PRM;
SET_ZN(PRES);
#ifdef DSP_DIS_AND
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_BCLR
if (doDSPDis)
- WriteLog("%06X: BCLR #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: BCLR #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
PRES = PRN & ~(1 << PIMM1);
SET_ZN(PRES);
#ifdef DSP_DIS_BCLR
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_BSET
if (doDSPDis)
- WriteLog("%06X: BSET #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: BSET #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
PRES = PRN | (1 << PIMM1);
SET_ZN(PRES);
#ifdef DSP_DIS_BSET
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_BTST
if (doDSPDis)
- WriteLog("%06X: BTST #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: BTST #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
dsp_flag_z = (~PRN >> PIMM1) & 1;
NO_WRITEBACK;
{
#ifdef DSP_DIS_CMP
if (doDSPDis)
- WriteLog("%06X: CMP R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: CMP R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
- UINT32 res = PRN - PRM;
+ uint32 res = PRN - PRM;
SET_ZNC_SUB(PRN, PRM, res);
NO_WRITEBACK;
#ifdef DSP_DIS_CMP
{ 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,-16,-15,-14,-13,-12,-11,-10,-9,-8,-7,-6,-5,-4,-3,-2,-1 };
#ifdef DSP_DIS_CMPQ
if (doDSPDis)
- WriteLog("%06X: CMPQ #%d, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, sqtable[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: CMPQ #%d, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, sqtable[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- UINT32 r1 = sqtable[PIMM1 & 0x1F]; // I like this better -> (INT8)(jaguar.op >> 2) >> 3;
- UINT32 res = PRN - r1;
+ uint32 r1 = sqtable[PIMM1 & 0x1F]; // I like this better -> (INT8)(jaguar.op >> 2) >> 3;
+ uint32 res = PRN - r1;
SET_ZNC_SUB(PRN, r1, res);
NO_WRITEBACK;
#ifdef DSP_DIS_CMPQ
{
#ifdef DSP_DIS_IMACN
if (doDSPDis)
- WriteLog("%06X: IMACN R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: IMACN R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
int32 res = (int16)PRM * (int16)PRN;
dsp_acc += (int64)res;
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, DSP_ACC=%02X%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, (uint8)(dsp_acc >> 32), (uint32)(dsp_acc & 0xFFFFFFFF));
#endif
-}
+}
static void DSP_imult(void)
{
#ifdef DSP_DIS_IMULT
if (doDSPDis)
- WriteLog("%06X: IMULT R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: IMULT R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
PRES = (int16)PRN * (int16)PRM;
SET_ZN(PRES);
#ifdef DSP_DIS_IMULT
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_IMULTN
if (doDSPDis)
- WriteLog("%06X: IMULTN R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: IMULTN R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
// This is OK, since this multiply won't overflow 32 bits...
int32 res = (int32)((int16)PRN * (int16)PRM);
{
#ifdef DSP_DIS_ILLEGAL
if (doDSPDis)
- WriteLog("%06X: ILLEGAL [NCZ:%u%u%u]\n", dsp_pc-2, dsp_flag_n, dsp_flag_c, dsp_flag_z);
+ WriteLog("%06X: ILLEGAL [NCZ:%u%u%u]\n", DSP_PPC, dsp_flag_n, dsp_flag_c, dsp_flag_z);
#endif
NO_WRITEBACK;
}
// There is a problem here with interrupt handlers the JUMP and JR instructions that
// can cause trouble because an interrupt can occur *before* the instruction following the
// jump can execute... !!! FIX !!!
+// This can probably be solved by judicious coding in the pipeline execution core...
+// And should be fixed now...
static void DSP_jr(void)
{
#ifdef DSP_DIS_JR
-char * condition[32] =
+const char * condition[32] =
{ "T", "nz", "z", "???", "nc", "nc nz", "nc z", "???", "c", "c nz",
"c z", "???", "???", "???", "???", "???", "???", "???", "???",
"???", "nn", "nn nz", "nn z", "???", "n", "n nz", "n z", "???",
"???", "???", "???", "F" };
if (doDSPDis)
- WriteLog("%06X: JR %s, %06X [NCZ:%u%u%u] ", dsp_pc-2, condition[PIMM2], dsp_pc+((PIMM1 & 0x10 ? 0xFFFFFFF0 | PIMM1 : PIMM1) * 2), dsp_flag_n, dsp_flag_c, dsp_flag_z);
+//How come this is always off by 2???
+ WriteLog("%06X: JR %s, %06X [NCZ:%u%u%u] ", DSP_PPC, condition[PIMM2], DSP_PPC+((PIMM1 & 0x10 ? 0xFFFFFFF0 | PIMM1 : PIMM1) * 2)+2, dsp_flag_n, dsp_flag_c, dsp_flag_z);
#endif
// KLUDGE: Used by BRANCH_CONDITION macro
uint32 jaguar_flags = (dsp_flag_n << 2) | (dsp_flag_c << 1) | dsp_flag_z;
WriteLog("Branched!\n");
#endif
int32 offset = (PIMM1 & 0x10 ? 0xFFFFFFF0 | PIMM1 : PIMM1); // Sign extend PIMM1
- int32 delayed_pc = dsp_pc + (offset * 2);
-// DSPExec(1);
- dsp_pc = delayed_pc;
+//Account for pipeline effects...
+ uint32 newPC = dsp_pc + (offset * 2) - (pipeline[plPtrRead].opcode == 38 ? 6 : (pipeline[plPtrRead].opcode == PIPELINE_STALL ? 0 : 2));
+//WriteLog(" --> Old PC: %08X, new PC: %08X\n", dsp_pc, newPC);
+
+ // Now that we've branched, we have to make sure that the following instruction
+ // is executed atomically with this one and then flush the pipeline before setting
+ // the new PC.
+
+ // Step 1: Handle writebacks at stage 3 of pipeline
+/* if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFF)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ scoreboard[pipeline[plPtrWrite].operand2] = false;
+ }//*/
+ if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFF)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFE)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+ else
+ {
+ if (pipeline[plPtrWrite].type == TYPE_BYTE)
+ JaguarWriteByte(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else if (pipeline[plPtrWrite].type == TYPE_WORD)
+ JaguarWriteWord(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else
+ JaguarWriteLong(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ }
+ }
+
+#ifndef NEW_SCOREBOARD
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ scoreboard[pipeline[plPtrWrite].operand2] = false;
+#else
+//Yup, sequential MOVEQ # problem fixing (I hope!)...
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ if (scoreboard[pipeline[plPtrWrite].operand2])
+ scoreboard[pipeline[plPtrWrite].operand2]--;
+#endif
+ }
+
+ // Step 2: Push instruction through pipeline & execute following instruction
+ // NOTE: By putting our following instruction at stage 3 of the pipeline,
+ // we effectively handle the final push of the instruction through the
+ // pipeline when the new PC takes effect (since when we return, the
+ // pipeline code will be executing the writeback stage. If we reverse
+ // the execution order of the pipeline stages, this will no longer be
+ // the case!)...
+ pipeline[plPtrExec] = pipeline[plPtrRead];
+//This is BAD. We need to get that next opcode and execute it!
+//NOTE: The problem is here because of a bad stall. Once those are fixed, we can probably
+// remove this crap.
+ if (pipeline[plPtrExec].opcode == PIPELINE_STALL)
+ {
+ uint16 instruction = DSPReadWord(dsp_pc, DSP);
+ pipeline[plPtrExec].opcode = instruction >> 10;
+ pipeline[plPtrExec].operand1 = (instruction >> 5) & 0x1F;
+ pipeline[plPtrExec].operand2 = instruction & 0x1F;
+ pipeline[plPtrExec].reg1 = dsp_reg[pipeline[plPtrExec].operand1];
+ pipeline[plPtrExec].reg2 = dsp_reg[pipeline[plPtrExec].operand2];
+ pipeline[plPtrExec].writebackRegister = pipeline[plPtrExec].operand2; // Set it to RN
+ }//*/
+ dsp_pc += 2; // For DSP_DIS_* accuracy
+ DSPOpcode[pipeline[plPtrExec].opcode]();
+ dsp_opcode_use[pipeline[plPtrExec].opcode]++;
+ pipeline[plPtrWrite] = pipeline[plPtrExec];
+
+ // Step 3: Flush pipeline & set new PC
+ pipeline[plPtrRead].opcode = pipeline[plPtrExec].opcode = PIPELINE_STALL;
+ dsp_pc = newPC;
}
-#ifdef DSP_DIS_JR
else
+#ifdef DSP_DIS_JR
+ {
if (doDSPDis)
WriteLog("Branch NOT taken.\n");
#endif
- NO_WRITEBACK;
+ NO_WRITEBACK;
+#ifdef DSP_DIS_JR
+ }
+#endif
+// WriteLog(" --> DSP_PC: %08X\n", dsp_pc);
}
static void DSP_jump(void)
{
#ifdef DSP_DIS_JUMP
-char * condition[32] =
+const char * condition[32] =
{ "T", "nz", "z", "???", "nc", "nc nz", "nc z", "???", "c", "c nz",
"c z", "???", "???", "???", "???", "???", "???", "???", "???",
"???", "nn", "nn nz", "nn z", "???", "n", "n nz", "n z", "???",
"???", "???", "???", "F" };
if (doDSPDis)
- WriteLog("%06X: JUMP %s, (R%02u) [NCZ:%u%u%u, R%02u=%08X] ", dsp_pc-2, condition[PIMM2], PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM);
+ WriteLog("%06X: JUMP %s, (R%02u) [NCZ:%u%u%u, R%02u=%08X] ", DSP_PPC, condition[PIMM2], PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM);
#endif
// KLUDGE: Used by BRANCH_CONDITION macro
uint32 jaguar_flags = (dsp_flag_n << 2) | (dsp_flag_c << 1) | dsp_flag_z;
if (doDSPDis)
WriteLog("Branched!\n");
#endif
-// uint32 delayed_pc = PRM;
-// DSPExec(1);
-// dsp_pc = delayed_pc;
- dsp_pc = PRM;
+ uint32 PCSave = PRM;
+ // Now that we've branched, we have to make sure that the following instruction
+ // is executed atomically with this one and then flush the pipeline before setting
+ // the new PC.
+
+ // Step 1: Handle writebacks at stage 3 of pipeline
+/* if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFF)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ scoreboard[pipeline[plPtrWrite].operand2] = false;
+ }//*/
+ if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFF)
+ {
+ if (pipeline[plPtrWrite].writebackRegister != 0xFE)
+ dsp_reg[pipeline[plPtrWrite].writebackRegister] = pipeline[plPtrWrite].result;
+ else
+ {
+ if (pipeline[plPtrWrite].type == TYPE_BYTE)
+ JaguarWriteByte(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else if (pipeline[plPtrWrite].type == TYPE_WORD)
+ JaguarWriteWord(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ else
+ JaguarWriteLong(pipeline[plPtrWrite].address, pipeline[plPtrWrite].value);
+ }
+ }
+
+#ifndef NEW_SCOREBOARD
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ scoreboard[pipeline[plPtrWrite].operand2] = false;
+#else
+//Yup, sequential MOVEQ # problem fixing (I hope!)...
+ if (affectsScoreboard[pipeline[plPtrWrite].opcode])
+ if (scoreboard[pipeline[plPtrWrite].operand2])
+ scoreboard[pipeline[plPtrWrite].operand2]--;
+#endif
+ }
+
+ // Step 2: Push instruction through pipeline & execute following instruction
+ // NOTE: By putting our following instruction at stage 3 of the pipeline,
+ // we effectively handle the final push of the instruction through the
+ // pipeline when the new PC takes effect (since when we return, the
+ // pipeline code will be executing the writeback stage. If we reverse
+ // the execution order of the pipeline stages, this will no longer be
+ // the case!)...
+ pipeline[plPtrExec] = pipeline[plPtrRead];
+//This is BAD. We need to get that next opcode and execute it!
+//Also, same problem in JR!
+//NOTE: The problem is here because of a bad stall. Once those are fixed, we can probably
+// remove this crap.
+ if (pipeline[plPtrExec].opcode == PIPELINE_STALL)
+ {
+ uint16 instruction = DSPReadWord(dsp_pc, DSP);
+ pipeline[plPtrExec].opcode = instruction >> 10;
+ pipeline[plPtrExec].operand1 = (instruction >> 5) & 0x1F;
+ pipeline[plPtrExec].operand2 = instruction & 0x1F;
+ pipeline[plPtrExec].reg1 = dsp_reg[pipeline[plPtrExec].operand1];
+ pipeline[plPtrExec].reg2 = dsp_reg[pipeline[plPtrExec].operand2];
+ pipeline[plPtrExec].writebackRegister = pipeline[plPtrExec].operand2; // Set it to RN
+ }//*/
+ dsp_pc += 2; // For DSP_DIS_* accuracy
+ DSPOpcode[pipeline[plPtrExec].opcode]();
+ dsp_opcode_use[pipeline[plPtrExec].opcode]++;
+ pipeline[plPtrWrite] = pipeline[plPtrExec];
+
+ // Step 3: Flush pipeline & set new PC
+ pipeline[plPtrRead].opcode = pipeline[plPtrExec].opcode = PIPELINE_STALL;
+ dsp_pc = PCSave;
}
-#ifdef DSP_DIS_JUMP
else
+#ifdef DSP_DIS_JUMP
+ {
if (doDSPDis)
WriteLog("Branch NOT taken.\n");
#endif
- NO_WRITEBACK;
+ NO_WRITEBACK;
+#ifdef DSP_DIS_JUMP
+ }
+#endif
}
static void DSP_load(void)
{
#ifdef DSP_DIS_LOAD
if (doDSPDis)
- WriteLog("%06X: LOAD (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: LOAD (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ PRES = DSPReadLong(PRM & 0xFFFFFFFC, DSP);
+#else
PRES = DSPReadLong(PRM, DSP);
+#endif
#ifdef DSP_DIS_LOAD
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_LOADB
if (doDSPDis)
- WriteLog("%06X: LOADB (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: LOADB (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
PRES = DSPReadLong(PRM, DSP) & 0xFF;
PRES = JaguarReadByte(PRM, DSP);
#ifdef DSP_DIS_LOADB
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_LOADW
if (doDSPDis)
- WriteLog("%06X: LOADW (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: LOADW (R%02u), R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
+ PRES = DSPReadLong(PRM & 0xFFFFFFFE, DSP) & 0xFFFF;
+ else
+ PRES = JaguarReadWord(PRM & 0xFFFFFFFE, DSP);
+#else
if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
PRES = DSPReadLong(PRM, DSP) & 0xFFFF;
else
PRES = JaguarReadWord(PRM, DSP);
+#endif
#ifdef DSP_DIS_LOADW
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_LOAD14I
if (doDSPDis)
- WriteLog("%06X: LOAD (R14+$%02X), R%02u [NCZ:%u%u%u, R14+$%02X=%08X, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1] << 2, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_convert_zero[PIMM1] << 2, dsp_reg[14]+(dsp_convert_zero[PIMM1] << 2), PIMM2, PRN);
+ WriteLog("%06X: LOAD (R14+$%02X), R%02u [NCZ:%u%u%u, R14+$%02X=%08X, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1] << 2, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_convert_zero[PIMM1] << 2, dsp_reg[14]+(dsp_convert_zero[PIMM1] << 2), PIMM2, PRN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ PRES = DSPReadLong((dsp_reg[14] & 0xFFFFFFFC) + (dsp_convert_zero[PIMM1] << 2), DSP);
+#else
PRES = DSPReadLong(dsp_reg[14] + (dsp_convert_zero[PIMM1] << 2), DSP);
+#endif
#ifdef DSP_DIS_LOAD14I
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_LOAD14R
if (doDSPDis)
- WriteLog("%06X: LOAD (R14+R%02u), R%02u [NCZ:%u%u%u, R14+R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM+dsp_reg[14], PIMM2, PRN);
+ WriteLog("%06X: LOAD (R14+R%02u), R%02u [NCZ:%u%u%u, R14+R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM+dsp_reg[14], PIMM2, PRES);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ PRES = DSPReadLong((dsp_reg[14] + PRM) & 0xFFFFFFFC, DSP);
+#else
PRES = DSPReadLong(dsp_reg[14] + PRM, DSP);
+#endif
#ifdef DSP_DIS_LOAD14R
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_LOAD15I
if (doDSPDis)
- WriteLog("%06X: LOAD (R15+$%02X), R%02u [NCZ:%u%u%u, R15+$%02X=%08X, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1] << 2, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_convert_zero[PIMM1] << 2, dsp_reg[15]+(dsp_convert_zero[PIMM1] << 2), PIMM2, PRN);
+ WriteLog("%06X: LOAD (R15+$%02X), R%02u [NCZ:%u%u%u, R15+$%02X=%08X, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1] << 2, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, dsp_convert_zero[PIMM1] << 2, dsp_reg[15]+(dsp_convert_zero[PIMM1] << 2), PIMM2, PRN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ PRES = DSPReadLong((dsp_reg[15] &0xFFFFFFFC) + (dsp_convert_zero[PIMM1] << 2), DSP);
+#else
PRES = DSPReadLong(dsp_reg[15] + (dsp_convert_zero[PIMM1] << 2), DSP);
+#endif
#ifdef DSP_DIS_LOAD15I
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_LOAD15R
if (doDSPDis)
- WriteLog("%06X: LOAD (R15+R%02u), R%02u [NCZ:%u%u%u, R15+R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM+dsp_reg[15], PIMM2, PRN);
+ WriteLog("%06X: LOAD (R15+R%02u), R%02u [NCZ:%u%u%u, R15+R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM+dsp_reg[15], PIMM2, PRN);
#endif
+#ifdef DSP_CORRECT_ALIGNMENT
+ PRES = DSPReadLong((dsp_reg[15] + PRM) & 0xFFFFFFFC, DSP);
+#else
PRES = DSPReadLong(dsp_reg[15] + PRM, DSP);
+#endif
#ifdef DSP_DIS_LOAD15R
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
-static void DSP_mirror(void)
+static void DSP_mirror(void)
{
- UINT32 r1 = PRN;
+ uint32 r1 = PRN;
PRES = (mirror_table[r1 & 0xFFFF] << 16) | mirror_table[r1 >> 16];
SET_ZN(PRES);
}
static void DSP_mmult(void)
{
int count = dsp_matrix_control&0x0f;
- uint32 addr = dsp_pointer_to_matrix; // in the gpu ram
+ uint32 addr = dsp_pointer_to_matrix; // in the dsp ram
int64 accum = 0;
uint32 res;
if (!(dsp_matrix_control & 0x10))
{
for (int i = 0; i < count; i++)
- {
+ {
int16 a;
if (i&0x01)
a=(int16)((dsp_alternate_reg[dsp_opcode_first_parameter + (i>>1)]>>16)&0xffff);
{
#ifdef DSP_DIS_MOVE
if (doDSPDis)
- WriteLog("%06X: MOVE R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: MOVE R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
PRES = PRM;
#ifdef DSP_DIS_MOVE
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_MOVEFA
if (doDSPDis)
-// WriteLog("%06X: MOVEFA R%02u, R%02u [NCZ:%u%u%u, R%02u(alt)=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, ALTERNATE_RM, PIMM2, PRN);
- WriteLog("%06X: MOVEFA R%02u, R%02u [NCZ:%u%u%u, R%02u(alt)=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, dsp_alternate_reg[PIMM1], PIMM2, PRN);
+// WriteLog("%06X: MOVEFA R%02u, R%02u [NCZ:%u%u%u, R%02u(alt)=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, ALTERNATE_RM, PIMM2, PRN);
+ WriteLog("%06X: MOVEFA R%02u, R%02u [NCZ:%u%u%u, R%02u(alt)=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, dsp_alternate_reg[PIMM1], PIMM2, PRN);
#endif
// PRES = ALTERNATE_RM;
PRES = dsp_alternate_reg[PIMM1];
{
#ifdef DSP_DIS_MOVEI
if (doDSPDis)
- WriteLog("%06X: MOVEI #$%08X, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, PRES, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: MOVEI #$%08X, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PRES, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
// // This instruction is followed by 32-bit value in LSW / MSW format...
// PRES = (uint32)DSPReadWord(dsp_pc, DSP) | ((uint32)DSPReadWord(dsp_pc + 2, DSP) << 16);
static void DSP_movepc(void)
{
-//Need to fix this to take into account pipelining effects... !!! FIX !!!
- PRES = dsp_pc - 2;
+#ifdef DSP_DIS_MOVEPC
+ if (doDSPDis)
+ WriteLog("%06X: MOVE PC, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+#endif
+//Need to fix this to take into account pipelining effects... !!! FIX !!! [DONE]
+// PRES = dsp_pc - 2;
+//Account for pipeline effects...
+ PRES = dsp_pc - 2 - (pipeline[plPtrRead].opcode == 38 ? 6 : (pipeline[plPtrRead].opcode == PIPELINE_STALL ? 0 : 2));
+#ifdef DSP_DIS_MOVEPC
+ if (doDSPDis)
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
+#endif
}
static void DSP_moveq(void)
{
#ifdef DSP_DIS_MOVEQ
if (doDSPDis)
- WriteLog("%06X: MOVEQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: MOVEQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
PRES = PIMM1;
#ifdef DSP_DIS_MOVEQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_MOVETA
if (doDSPDis)
-// WriteLog("%06X: MOVETA R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u(alt)=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, ALTERNATE_RN);
- WriteLog("%06X: MOVETA R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u(alt)=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, dsp_alternate_reg[PIMM2]);
+// WriteLog("%06X: MOVETA R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u(alt)=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, ALTERNATE_RN);
+ WriteLog("%06X: MOVETA R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u(alt)=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, dsp_alternate_reg[PIMM2]);
#endif
// ALTERNATE_RN = PRM;
dsp_alternate_reg[PIMM2] = PRM;
static void DSP_mtoi(void)
{
- PRES = (((INT32)PRM >> 8) & 0xFF800000) | (PRM & 0x007FFFFF);
+ PRES = (((int32)PRM >> 8) & 0xFF800000) | (PRM & 0x007FFFFF);
SET_ZN(PRES);
}
{
#ifdef DSP_DIS_MULT
if (doDSPDis)
- WriteLog("%06X: MULT R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: MULT R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
PRES = (uint16)PRM * (uint16)PRN;
SET_ZN(PRES);
#ifdef DSP_DIS_MULT
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_NEG
if (doDSPDis)
- WriteLog("%06X: NEG R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: NEG R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- UINT32 res = -PRN;
+ uint32 res = -PRN;
SET_ZNC_SUB(0, PRN, res);
PRES = res;
#ifdef DSP_DIS_NEG
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_NOP
if (doDSPDis)
- WriteLog("%06X: NOP [NCZ:%u%u%u]\n", dsp_pc-2, dsp_flag_n, dsp_flag_c, dsp_flag_z);
+ WriteLog("%06X: NOP [NCZ:%u%u%u]\n", DSP_PPC, dsp_flag_n, dsp_flag_c, dsp_flag_z);
#endif
NO_WRITEBACK;
}
{
#ifdef DSP_DIS_NOT
if (doDSPDis)
- WriteLog("%06X: NOT R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: NOT R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
PRES = ~PRN;
SET_ZN(PRES);
#ifdef DSP_DIS_NOT
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_OR
if (doDSPDis)
- WriteLog("%06X: OR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: OR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
PRES = PRN | PRM;
SET_ZN(PRES);
#ifdef DSP_DIS_OR
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_RESMAC
if (doDSPDis)
- WriteLog("%06X: RESMAC R%02u [NCZ:%u%u%u, R%02u=%08X, DSP_ACC=%02X%08X] -> ", dsp_pc-2, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, (uint8)(dsp_acc >> 32), (uint32)(dsp_acc & 0xFFFFFFFF));
+ WriteLog("%06X: RESMAC R%02u [NCZ:%u%u%u, R%02u=%08X, DSP_ACC=%02X%08X] -> ", DSP_PPC, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, (uint8)(dsp_acc >> 32), (uint32)(dsp_acc & 0xFFFFFFFF));
#endif
PRES = (uint32)dsp_acc;
#ifdef DSP_DIS_RESMAC
{
#ifdef DSP_DIS_ROR
if (doDSPDis)
- WriteLog("%06X: ROR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: ROR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
- UINT32 r1 = PRM & 0x1F;
- UINT32 res = (PRN >> r1) | (PRN << (32 - r1));
+ uint32 r1 = PRM & 0x1F;
+ uint32 res = (PRN >> r1) | (PRN << (32 - r1));
SET_ZN(res); dsp_flag_c = (PRN >> 31) & 1;
PRES = res;
#ifdef DSP_DIS_ROR
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_RORQ
if (doDSPDis)
- WriteLog("%06X: RORQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: RORQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- UINT32 r1 = dsp_convert_zero[PIMM1 & 0x1F];
- UINT32 r2 = PRN;
- UINT32 res = (r2 >> r1) | (r2 << (32 - r1));
+ uint32 r1 = dsp_convert_zero[PIMM1 & 0x1F];
+ uint32 r2 = PRN;
+ uint32 res = (r2 >> r1) | (r2 << (32 - r1));
PRES = res;
SET_ZN(res); dsp_flag_c = (r2 >> 31) & 0x01;
#ifdef DSP_DIS_RORQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
-static void DSP_sat16s(void)
+static void DSP_sat16s(void)
{
- INT32 r2 = PRN;
- UINT32 res = (r2 < -32768) ? -32768 : (r2 > 32767) ? 32767 : r2;
+ int32 r2 = PRN;
+ uint32 res = (r2 < -32768) ? -32768 : (r2 > 32767) ? 32767 : r2;
PRES = res;
SET_ZN(res);
}
-static void DSP_sat32s(void)
+static void DSP_sat32s(void)
{
- INT32 r2 = (UINT32)PRN;
- INT32 temp = dsp_acc >> 32;
- UINT32 res = (temp < -1) ? (INT32)0x80000000 : (temp > 0) ? (INT32)0x7FFFFFFF : r2;
+ int32 r2 = (uint32)PRN;
+ int32 temp = dsp_acc >> 32;
+ uint32 res = (temp < -1) ? (int32)0x80000000 : (temp > 0) ? (int32)0x7FFFFFFF : r2;
PRES = res;
SET_ZN(res);
}
{
#ifdef DSP_DIS_SHARQ
if (doDSPDis)
- WriteLog("%06X: SHARQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: SHARQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- UINT32 res = (INT32)PRN >> dsp_convert_zero[PIMM1];
+ uint32 res = (int32)PRN >> dsp_convert_zero[PIMM1];
SET_ZN(res); dsp_flag_c = PRN & 0x01;
PRES = res;
#ifdef DSP_DIS_SHARQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_SHLQ
if (doDSPDis)
- WriteLog("%06X: SHLQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, 32 - PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: SHLQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, 32 - PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- INT32 r1 = 32 - PIMM1;
- UINT32 res = PRN << r1;
+ int32 r1 = 32 - PIMM1;
+ uint32 res = PRN << r1;
SET_ZN(res); dsp_flag_c = (PRN >> 31) & 1;
PRES = res;
#ifdef DSP_DIS_SHLQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_SHRQ
if (doDSPDis)
- WriteLog("%06X: SHRQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: SHRQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- INT32 r1 = dsp_convert_zero[PIMM1];
- UINT32 res = PRN >> r1;
+ int32 r1 = dsp_convert_zero[PIMM1];
+ uint32 res = PRN >> r1;
SET_ZN(res); dsp_flag_c = PRN & 1;
PRES = res;
#ifdef DSP_DIS_SHRQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_STORE
if (doDSPDis)
- WriteLog("%06X: STORE R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_pc-2, PIMM2, PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, PIMM1, PRM);
+ WriteLog("%06X: STORE R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", DSP_PPC, PIMM2, PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, PIMM1, PRM);
#endif
- DSPWriteLong(PRM, PRN, DSP);
- NO_WRITEBACK;
+// DSPWriteLong(PRM, PRN, DSP);
+// NO_WRITEBACK;
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ pipeline[plPtrExec].address = PRM & 0xFFFFFFFC;
+#else
+ pipeline[plPtrExec].address = PRM;
+#endif
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ WRITEBACK_ADDR;
}
static void DSP_storeb(void)
{
#ifdef DSP_DIS_STOREB
if (doDSPDis)
- WriteLog("%06X: STOREB R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_pc-2, PIMM2, PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, PIMM1, PRM);
+ WriteLog("%06X: STOREB R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", DSP_PPC, PIMM2, PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, PIMM1, PRM);
#endif
+// if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
+// DSPWriteLong(PRM, PRN & 0xFF, DSP);
+// else
+// JaguarWriteByte(PRM, PRN, DSP);
+//
+// NO_WRITEBACK;
+ pipeline[plPtrExec].address = PRM;
+
if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
- DSPWriteLong(PRM, PRN & 0xFF, DSP);
+ {
+ pipeline[plPtrExec].value = PRN & 0xFF;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ }
else
- JaguarWriteByte(PRM, PRN, DSP);
+ {
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_BYTE;
+ }
- NO_WRITEBACK;
+ WRITEBACK_ADDR;
}
static void DSP_storew(void)
{
#ifdef DSP_DIS_STOREW
if (doDSPDis)
- WriteLog("%06X: STOREW R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_pc-2, PIMM2, PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, PIMM1, PRM);
+ WriteLog("%06X: STOREW R%02u, (R%02u) [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", DSP_PPC, PIMM2, PIMM1, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, PIMM1, PRM);
+#endif
+// if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
+// DSPWriteLong(PRM, PRN & 0xFFFF, DSP);
+// else
+// JaguarWriteWord(PRM, PRN, DSP);
+//
+// NO_WRITEBACK;
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ pipeline[plPtrExec].address = PRM & 0xFFFFFFFE;
+#else
+ pipeline[plPtrExec].address = PRM;
#endif
+
if (PRM >= DSP_WORK_RAM_BASE && PRM <= (DSP_WORK_RAM_BASE + 0x1FFF))
- DSPWriteLong(PRM, PRN & 0xFFFF, DSP);
+ {
+ pipeline[plPtrExec].value = PRN & 0xFFFF;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ }
else
- JaguarWriteWord(PRM, PRN, DSP);
-
- NO_WRITEBACK;
+ {
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_WORD;
+ }
+ WRITEBACK_ADDR;
}
static void DSP_store_r14_i(void)
{
#ifdef DSP_DIS_STORE14I
if (doDSPDis)
- WriteLog("%06X: STORE R%02u, (R14+$%02X) [NCZ:%u%u%u, R%02u=%08X, R14+$%02X=%08X]\n", dsp_pc-2, PIMM2, dsp_convert_zero[PIMM1] << 2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, dsp_convert_zero[PIMM1] << 2, dsp_reg[14]+(dsp_convert_zero[PIMM1] << 2));
+ WriteLog("%06X: STORE R%02u, (R14+$%02X) [NCZ:%u%u%u, R%02u=%08X, R14+$%02X=%08X]\n", DSP_PPC, PIMM2, dsp_convert_zero[PIMM1] << 2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, dsp_convert_zero[PIMM1] << 2, dsp_reg[14]+(dsp_convert_zero[PIMM1] << 2));
#endif
- DSPWriteLong(dsp_reg[14] + (dsp_convert_zero[PIMM1] << 2), PRN, DSP);
- NO_WRITEBACK;
+// DSPWriteLong(dsp_reg[14] + (dsp_convert_zero[PIMM1] << 2), PRN, DSP);
+// NO_WRITEBACK;
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ pipeline[plPtrExec].address = (dsp_reg[14] & 0xFFFFFFFC) + (dsp_convert_zero[PIMM1] << 2);
+#else
+ pipeline[plPtrExec].address = dsp_reg[14] + (dsp_convert_zero[PIMM1] << 2);
+#endif
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ WRITEBACK_ADDR;
}
static void DSP_store_r14_r(void)
{
- DSPWriteLong(dsp_reg[14] + PRM, PRN, DSP);
- NO_WRITEBACK;
+// DSPWriteLong(dsp_reg[14] + PRM, PRN, DSP);
+// NO_WRITEBACK;
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ pipeline[plPtrExec].address = (dsp_reg[14] + PRM) & 0xFFFFFFFC;
+#else
+ pipeline[plPtrExec].address = dsp_reg[14] + PRM;
+#endif
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ WRITEBACK_ADDR;
}
static void DSP_store_r15_i(void)
{
#ifdef DSP_DIS_STORE15I
if (doDSPDis)
- WriteLog("%06X: STORE R%02u, (R15+$%02X) [NCZ:%u%u%u, R%02u=%08X, R15+$%02X=%08X]\n", dsp_pc-2, PIMM2, dsp_convert_zero[PIMM1] << 2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, dsp_convert_zero[PIMM1] << 2, dsp_reg[15]+(dsp_convert_zero[PIMM1] << 2));
+ WriteLog("%06X: STORE R%02u, (R15+$%02X) [NCZ:%u%u%u, R%02u=%08X, R15+$%02X=%08X]\n", DSP_PPC, PIMM2, dsp_convert_zero[PIMM1] << 2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN, dsp_convert_zero[PIMM1] << 2, dsp_reg[15]+(dsp_convert_zero[PIMM1] << 2));
#endif
- DSPWriteLong(dsp_reg[15] + (dsp_convert_zero[PIMM1] << 2), PRN, DSP);
- NO_WRITEBACK;
+// DSPWriteLong(dsp_reg[15] + (dsp_convert_zero[PIMM1] << 2), PRN, DSP);
+// NO_WRITEBACK;
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ pipeline[plPtrExec].address = (dsp_reg[15] & 0xFFFFFFFC) + (dsp_convert_zero[PIMM1] << 2);
+#else
+ pipeline[plPtrExec].address = dsp_reg[15] + (dsp_convert_zero[PIMM1] << 2);
+#endif
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ WRITEBACK_ADDR;
}
static void DSP_store_r15_r(void)
{
- DSPWriteLong(dsp_reg[15] + PRM, PRN, DSP);
- NO_WRITEBACK;
+// DSPWriteLong(dsp_reg[15] + PRM, PRN, DSP);
+// NO_WRITEBACK;
+#ifdef DSP_CORRECT_ALIGNMENT_STORE
+ pipeline[plPtrExec].address = (dsp_reg[15] + PRM) & 0xFFFFFFFC;
+#else
+ pipeline[plPtrExec].address = dsp_reg[15] + PRM;
+#endif
+ pipeline[plPtrExec].value = PRN;
+ pipeline[plPtrExec].type = TYPE_DWORD;
+ WRITEBACK_ADDR;
}
static void DSP_sub(void)
{
#ifdef DSP_DIS_SUB
if (doDSPDis)
- WriteLog("%06X: SUB R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: SUB R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
- UINT32 res = PRN - PRM;
+ uint32 res = PRN - PRM;
SET_ZNC_SUB(PRN, PRM, res);
PRES = res;
#ifdef DSP_DIS_SUB
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_SUBC
if (doDSPDis)
- WriteLog("%06X: SUBC R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: SUBC R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
- UINT32 res = PRN - PRM - dsp_flag_c;
- UINT32 borrow = dsp_flag_c;
+ uint32 res = PRN - PRM - dsp_flag_c;
+ uint32 borrow = dsp_flag_c;
SET_ZNC_SUB(PRN - borrow, PRM, res);
PRES = res;
#ifdef DSP_DIS_SUBC
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_SUBQ
if (doDSPDis)
- WriteLog("%06X: SUBQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: SUBQ #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
- UINT32 r1 = dsp_convert_zero[PIMM1];
- UINT32 res = PRN - r1;
+ uint32 r1 = dsp_convert_zero[PIMM1];
+ uint32 res = PRN - r1;
SET_ZNC_SUB(PRN, r1, res);
PRES = res;
#ifdef DSP_DIS_SUBQ
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
-static void DSP_subqmod(void)
+static void DSP_subqmod(void)
{
- UINT32 r1 = dsp_convert_zero[PIMM1];
- UINT32 r2 = PRN;
- UINT32 res = r2 - r1;
+ uint32 r1 = dsp_convert_zero[PIMM1];
+ uint32 r2 = PRN;
+ uint32 res = r2 - r1;
res = (res & (~dsp_modulo)) | (r2 & dsp_modulo);
PRES = res;
SET_ZNC_SUB(r2, r1, res);
{
#ifdef DSP_DIS_SUBQT
if (doDSPDis)
- WriteLog("%06X: SUBQT #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", dsp_pc-2, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("%06X: SUBQT #%u, R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, dsp_convert_zero[PIMM1], PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
PRES = PRN - dsp_convert_zero[PIMM1];
#ifdef DSP_DIS_SUBQT
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRES);
#endif
}
{
#ifdef DSP_DIS_XOR
if (doDSPDis)
- WriteLog("%06X: XOR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", dsp_pc-2, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("%06X: XOR R%02u, R%02u [NCZ:%u%u%u, R%02u=%08X, R%02u=%08X] -> ", DSP_PPC, PIMM1, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
#endif
PRES = PRN ^ PRM;
SET_ZN(PRES);
#ifdef DSP_DIS_XOR
if (doDSPDis)
- WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRN);
+ WriteLog("[NCZ:%u%u%u, R%02u=%08X, R%02u=%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM1, PRM, PIMM2, PRES);
#endif
}