#include "dsp.h"
+#include <SDL.h> // Used only for SDL_GetTicks...
#include <stdlib.h>
-#include <SDL.h> // Used only for SDL_GetTicks...
-#include "memory.h"
-#include "log.h"
-#include "jaguar.h"
-#include "jerry.h"
#include "gpu.h"
#include "jagdasm.h"
+#include "jaguar.h"
+#include "jerry.h"
+#include "log.h"
#include "m68k.h"
+#include "memory.h"
//#define DSP_DEBUG
//#define DSP_DEBUG_IRQ
static void dsp_opcode_add(void);
static void dsp_opcode_addc(void);
static void dsp_opcode_addq(void);
-static void dsp_opcode_addqmod(void);
+static void dsp_opcode_addqmod(void);
static void dsp_opcode_addqt(void);
static void dsp_opcode_and(void);
static void dsp_opcode_bclr(void);
static void dsp_opcode_load_r14_ri(void);
static void dsp_opcode_load_r15_indexed(void);
static void dsp_opcode_load_r15_ri(void);
-static void dsp_opcode_mirror(void);
+static void dsp_opcode_mirror(void);
static void dsp_opcode_mmult(void);
static void dsp_opcode_move(void);
static void dsp_opcode_movei(void);
static void dsp_opcode_ror(void);
static void dsp_opcode_rorq(void);
static void dsp_opcode_xor(void);
-static void dsp_opcode_sat16s(void);
-static void dsp_opcode_sat32s(void);
+static void dsp_opcode_sat16s(void);
+static void dsp_opcode_sat32s(void);
static void dsp_opcode_sh(void);
static void dsp_opcode_sha(void);
static void dsp_opcode_sharq(void);
static void dsp_opcode_sub(void);
static void dsp_opcode_subc(void);
static void dsp_opcode_subq(void);
-static void dsp_opcode_subqmod(void);
+static void dsp_opcode_subqmod(void);
static void dsp_opcode_subqt(void);
uint8 dsp_opcode_cycles[64] =
{
- 3, 3, 3, 3, 3, 3, 3, 3,
3, 3, 3, 3, 3, 3, 3, 3,
- 3, 3, 1, 3, 1, 18, 3, 3,
3, 3, 3, 3, 3, 3, 3, 3,
- 3, 3, 2, 2, 2, 2, 3, 4,
+ 3, 3, 1, 3, 1, 18, 3, 3,
+ 3, 3, 3, 3, 3, 3, 3, 3,
+ 3, 3, 2, 2, 2, 2, 3, 4,
5, 4, 5, 6, 6, 1, 1, 1,
- 1, 2, 2, 2, 1, 1, 9, 3,
+ 1, 2, 2, 2, 1, 1, 9, 3,
3, 1, 6, 6, 2, 2, 3, 3
};//*/
//Here's a QnD kludge...
//This is wrong, wrong, WRONG, but it seems to work for the time being...
//(That is, it fixes Flip Out which relies on GPU timing rather than semaphores. Bad developers! Bad!)
//What's needed here is a way to take pipeline effects into account (including pipeline stalls!)...
-/*uint8 dsp_opcode_cycles[64] =
+/*uint8 dsp_opcode_cycles[64] =
{
1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1,
};//*/
void (* dsp_opcode[64])() =
-{
+{
dsp_opcode_add, dsp_opcode_addc, dsp_opcode_addq, dsp_opcode_addqt,
dsp_opcode_sub, dsp_opcode_subc, dsp_opcode_subq, dsp_opcode_subqt,
dsp_opcode_neg, dsp_opcode_and, dsp_opcode_or, dsp_opcode_xor,
uint32 dsp_opcode_use[65];
const char * dsp_opcode_str[65]=
-{
+{
"add", "addc", "addq", "addqt",
"sub", "subc", "subq", "subqt",
"neg", "and", "or", "xor",
static uint32 dsp_data_organization;
uint32 dsp_control;
static uint32 dsp_div_control;
-static uint8 dsp_flag_z, dsp_flag_n, dsp_flag_c;
+static uint8 dsp_flag_z, dsp_flag_n, dsp_flag_c;
static uint32 * dsp_reg = NULL, * dsp_alternate_reg = NULL;
static uint32 dsp_reg_bank_0[32], dsp_reg_bank_1[32];
dsp_opcode_use[i] = 0;
}
-void dsp_releaseTimeslice(void)
+void DSPReleaseTimeslice(void)
{
//This does absolutely nothing!!! !!! FIX !!!
dsp_releaseTimeSlice_flag = 1;
}
return JaguarReadByte(offset, who);
-}
+}
uint16 DSPReadWord(uint32 offset, uint32 who/*=UNKNOWN*/)
{
{
uint32 reg = offset & 0x1C;
int bytenum = offset & 0x03;
-
+
if ((reg >= 0x1C) && (reg <= 0x1F))
dsp_div_control = (dsp_div_control & (~(0xFF << (bytenum << 3)))) | (data << (bytenum << 3));
else
//This looks funky. !!! FIX !!!
uint32 old_data = DSPReadLong(offset&0xFFFFFFC, who);
bytenum = 3 - bytenum; // convention motorola !!!
- old_data = (old_data & (~(0xFF << (bytenum << 3)))) | (data << (bytenum << 3));
+ old_data = (old_data & (~(0xFF << (bytenum << 3)))) | (data << (bytenum << 3));
DSPWriteLong(offset & 0xFFFFFFC, old_data, who);
}
return;
//!!!!!!!!
break;
case 0x14:
- {
+ {
//#ifdef DSP_DEBUG
WriteLog("Write to DSP CTRL by %s: %08X\n", whoName[who], data);
//#endif
if (JERRYIRQEnabled(IRQ2_DSP))// && jaguar_interrupt_handler_is_valid(64))
{
JERRYSetPendingIRQ(IRQ2_DSP);
- dsp_releaseTimeslice();
+ DSPReleaseTimeslice();
m68k_set_irq(7); // Set 68000 NMI...
}
data &= ~CPUINT;
WriteLog("DSP: CPU -> DSP interrupt\n");
#endif
m68k_end_timeslice();
- gpu_releaseTimeslice();
+ GPUReleaseTimeslice();
DSPSetIRQLine(DSPIRQ_CPU, ASSERT_LINE);
data &= ~DSPINT0;
}
if (who == M68K)
m68k_end_timeslice();
else if (who == GPU)
- gpu_releaseTimeslice();
+ GPUReleaseTimeslice();
if (!wasRunning)
FlushDSPPipeline();
if (!bits) // Bail if nothing is enabled
return;
- int which = 0; // Determine which interrupt
+ int which = 0; // Determine which interrupt
if (bits & 0x01)
which = 0;
if (bits & 0x02)
WriteLog(" [PC will return to %08X, R31 = %08X]\n", dsp_pc - (pipeline[plPtrExec].opcode == 38 ? 6 : (pipeline[plPtrExec].opcode == PIPELINE_STALL ? 0 : 2)), dsp_reg[31]);
#endif
- // subqt #4,r31 ; pre-decrement stack pointer
- // move pc,r30 ; address of interrupted code
+ // subqt #4,r31 ; pre-decrement stack pointer
+ // move pc,r30 ; address of interrupted code
// store r30,(r31) ; store return address
dsp_reg[31] -= 4;
//CC only!
#endif
//!!!!!!!!
- // movei #service_address,r30 ; pointer to ISR entry
- // jump (r30) ; jump to ISR
+ // movei #service_address,r30 ; pointer to ISR entry
+ // jump (r30) ; jump to ISR
// nop
dsp_pc = dsp_reg[30] = DSP_WORK_RAM_BASE + (which * 0x10);
//CC only!
if (!bits) // Bail if nothing is enabled
return;
- int which = 0; // Determine which interrupt
+ int which = 0; // Determine which interrupt
if (bits & 0x01)
which = 0;
if (bits & 0x02)
WriteLog(" [PC will return to %08X, R31 = %08X]\n", dsp_pc, dsp_reg[31]);
#endif
- // subqt #4,r31 ; pre-decrement stack pointer
- // move pc,r30 ; address of interrupted code
+ // subqt #4,r31 ; pre-decrement stack pointer
+ // move pc,r30 ; address of interrupted code
// store r30,(r31) ; store return address
dsp_reg[31] -= 4;
//CC only!
#endif
//!!!!!!!!
- // movei #service_address,r30 ; pointer to ISR entry
- // jump (r30) ; jump to ISR
+ // movei #service_address,r30 ; pointer to ISR entry
+ // jump (r30) ; jump to ISR
// nop
dsp_pc = dsp_reg[30] = DSP_WORK_RAM_BASE + (which * 0x10);
//CC only!
WriteLog("DSP: Stopped at PC=%08X dsp_modulo=%08X (dsp %s running)\n", dsp_pc, dsp_modulo, (DSP_RUNNING ? "was" : "wasn't"));
WriteLog("DSP: %sin interrupt handler\n", (dsp_flags & IMASK ? "" : "not "));
- // get the active interrupt bits
+ // get the active interrupt bits
int bits = ((dsp_control >> 10) & 0x20) | ((dsp_control >> 6) & 0x1F);
- // get the interrupt mask
+ // get the interrupt mask
int mask = ((dsp_flags >> 11) & 0x20) | ((dsp_flags >> 4) & 0x1F);
WriteLog("DSP: pending=%08X enabled=%08X\n", bits, mask);
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, DSP_ACC=%02X%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, (uint8)(dsp_acc >> 32), (uint32)(dsp_acc & 0xFFFFFFFF));
#endif
-}
+}
static void dsp_opcode_mtoi(void)
{
if (!(dsp_matrix_control & 0x10))
{
for (int i = 0; i < count; i++)
- {
+ {
int16 a;
if (i&0x01)
a=(int16)((dsp_alternate_reg[dsp_opcode_first_parameter + (i>>1)]>>16)&0xffff);
#endif
uint32 _Rn = RN;
uint32 res;
-
+
if (_Rn == 0x80000000)
dsp_flag_n = 1;
else
#endif
}
-void dsp_opcode_subqmod(void)
+void dsp_opcode_subqmod(void)
{
uint32 r1 = dsp_convert_zero[IMM_1];
uint32 r2 = RN;
uint32 res = r2 - r1;
res = (res & (~dsp_modulo)) | (r2 & dsp_modulo);
RN = res;
-
+
SET_ZNC_SUB(r2, r1, res);
}
-void dsp_opcode_mirror(void)
+void dsp_opcode_mirror(void)
{
uint32 r1 = RN;
RN = (mirror_table[r1 & 0xFFFF] << 16) | mirror_table[r1 >> 16];
SET_ZN(RN);
}
-void dsp_opcode_sat32s(void)
+void dsp_opcode_sat32s(void)
{
int32 r2 = (uint32)RN;
int32 temp = dsp_acc >> 32;
SET_ZN(res);
}
-void dsp_opcode_sat16s(void)
+void dsp_opcode_sat16s(void)
{
int32 r2 = RN;
uint32 res = (r2 < -32768) ? -32768 : (r2 > 32767) ? 32767 : r2;
static void DSP_add(void);
static void DSP_addc(void);
static void DSP_addq(void);
-static void DSP_addqmod(void);
+static void DSP_addqmod(void);
static void DSP_addqt(void);
static void DSP_and(void);
static void DSP_bclr(void);
static void DSP_load_r14_r(void);
static void DSP_load_r15_i(void);
static void DSP_load_r15_r(void);
-static void DSP_mirror(void);
+static void DSP_mirror(void);
static void DSP_mmult(void);
static void DSP_move(void);
static void DSP_movefa(void);
static void DSP_resmac(void);
static void DSP_ror(void);
static void DSP_rorq(void);
-static void DSP_sat16s(void);
-static void DSP_sat32s(void);
+static void DSP_sat16s(void);
+static void DSP_sat32s(void);
static void DSP_sh(void);
static void DSP_sha(void);
static void DSP_sharq(void);
static void DSP_sub(void);
static void DSP_subc(void);
static void DSP_subq(void);
-static void DSP_subqmod(void);
+static void DSP_subqmod(void);
static void DSP_subqt(void);
static void DSP_xor(void);
WriteLog("%06X: ABS R%02u [NCZ:%u%u%u, R%02u=%08X] -> ", DSP_PPC, PIMM2, dsp_flag_n, dsp_flag_c, dsp_flag_z, PIMM2, PRN);
#endif
uint32 _Rn = PRN;
-
+
if (_Rn == 0x80000000)
dsp_flag_n = 1;
else
if (doDSPDis)
WriteLog("[NCZ:%u%u%u, DSP_ACC=%02X%08X]\n", dsp_flag_n, dsp_flag_c, dsp_flag_z, (uint8)(dsp_acc >> 32), (uint32)(dsp_acc & 0xFFFFFFFF));
#endif
-}
+}
static void DSP_imult(void)
{
// Now that we've branched, we have to make sure that the following instruction
// is executed atomically with this one and then flush the pipeline before setting
// the new PC.
-
+
// Step 1: Handle writebacks at stage 3 of pipeline
/* if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
{
// Now that we've branched, we have to make sure that the following instruction
// is executed atomically with this one and then flush the pipeline before setting
// the new PC.
-
+
// Step 1: Handle writebacks at stage 3 of pipeline
/* if (pipeline[plPtrWrite].opcode != PIPELINE_STALL)
{
#endif
}
-static void DSP_mirror(void)
+static void DSP_mirror(void)
{
uint32 r1 = PRN;
PRES = (mirror_table[r1 & 0xFFFF] << 16) | mirror_table[r1 >> 16];
if (!(dsp_matrix_control & 0x10))
{
for (int i = 0; i < count; i++)
- {
+ {
int16 a;
if (i&0x01)
a=(int16)((dsp_alternate_reg[dsp_opcode_first_parameter + (i>>1)]>>16)&0xffff);
#endif
}
-static void DSP_sat16s(void)
+static void DSP_sat16s(void)
{
int32 r2 = PRN;
uint32 res = (r2 < -32768) ? -32768 : (r2 > 32767) ? 32767 : r2;
SET_ZN(res);
}
-static void DSP_sat32s(void)
+static void DSP_sat32s(void)
{
int32 r2 = (uint32)PRN;
int32 temp = dsp_acc >> 32;
#endif
}
-static void DSP_subqmod(void)
+static void DSP_subqmod(void)
{
uint32 r1 = dsp_convert_zero[PIMM1];
uint32 r2 = PRN;
projects / virtualjaguar / blobdiff