// WHO WHEN WHAT
// --- ---------- ------------------------------------------------------------
// JLH 04/04/2011 Created this file, basic rendering
+// JLH 03/14/2013 Updated to new connection system
//
#include "dimension.h"
#include <QtGui>
+#include "geometry.h"
#include "mathconstants.h"
#include "painter.h"
-Dimension::Dimension(Vector p1, Vector p2, DimensionType dt/*= DTLinear*/ ,Object * p/*= NULL*/):
+Dimension::Dimension(Vector p1, Vector p2, DimensionType dt/*= DTLinear*/, Object * p/*= NULL*/):
Object(p1, p), endpoint(p2),
dragging(false), draggingHandle1(false), draggingHandle2(false),
- length(p2.Magnitude()), type(dt), point1(NULL), point2(NULL)
+ length(p2.Magnitude()), dimensionType(dt), size(0.25)//, point1(NULL), point2(NULL)
{
+ // We set the size to 1/4 base unit. Could be anything.
+ type = OTDimension;
}
-
+#if 0
// This is bad, p1 & p2 could be NULL, causing much consternation...
-Dimension::Dimension(Vector * p1, Vector * p2, DimensionType dt/*= DTLinear*/ , Object * p/*= NULL*/):
- Object(*p1, p), endpoint(*p2),
+Dimension::Dimension(Connection p1, Connection p2, DimensionType dt/*= DTLinear*/, Object * p/*= NULL*/):
dragging(false), draggingHandle1(false), draggingHandle2(false),
- length(p2->Magnitude()), type(dt), point1(p1), point2(p2)
+ length(0), dimensionType(dt), size(0.25)//, point1(p1), point2(p2)
{
+ type = OTDimension;
}
-
+#endif
Dimension::~Dimension()
{
}
+/*
+How to move: click once moves only the object/point clicked on, all connected
+objects deform themselves accordingly. click twice selects ALL connected objects;
+all objects move as a unified whole.
+
+*/
+
/*virtual*/ void Dimension::Draw(Painter * painter)
{
- // If there are valid Vector pointers in here, use them to update the internal
- // positions. Otherwise, we just use the internal positions by default.
- if (point1)
- position = *point1;
+ painter->SetPen(QPen(Qt::magenta, 2.0, Qt::DotLine));
+
+ if ((state == OSSelected) || ((state == OSInactive) && hitPoint1))
+ painter->DrawHandle(position);
- if (point2)
- endpoint = *point2;
+ if ((state == OSSelected) || ((state == OSInactive) && hitPoint2))
+ painter->DrawHandle(endpoint);
if (state == OSSelected)
- painter->SetPen(QPen(Qt::red, 2.0, Qt::DotLine));
+ painter->SetPen(QPen(Qt::cyan, 1.0 * Painter::zoom * size, Qt::SolidLine));
else
- painter->SetPen(QPen(Qt::blue, 1.0, Qt::SolidLine));
+ painter->SetPen(QPen(Qt::blue, 1.0 * Painter::zoom * size, Qt::SolidLine));
+
+ painter->SetBrush(QBrush(QColor(Qt::blue)));
// Draw an aligned dimension line
- double angle = Vector(endpoint - position).Angle();
- double orthoAngle = angle + (PI / 2.0);
- Vector orthogonal = Vector(cos(orthoAngle), sin(orthoAngle));
- Vector unit = Vector(endpoint - position).Unit();
+ Vector v(position, endpoint);
+ double angle = v.Angle();
+ Vector orthogonal = Vector::Normal(position, endpoint);
+ Vector unit = v.Unit();
+ linePt1 = position, linePt2 = endpoint;
+
+// Horizontally aligned display
+#if 1
+ Vector /*pos = position, endp = endpoint,*/ ortho;
+ double y1;
+
+ if ((angle < PI_OVER_2) || (angle > PI3_OVER_2))
+ {
+ y1 = (position.y > endpoint.y ? position.y : endpoint.y);
+ ortho = Vector(0, 1.0);
+ angle = 0;
+ }
+ else
+ {
+ y1 = (position.y > endpoint.y ? endpoint.y : position.y);
+ ortho = Vector(0, -1.0);
+ angle = PI;
+ }
-//NOTE: SCREEN_ZOOM is our kludge factor... We need to figure out a better
-// way of doing this...
+// pos.y = endp.y = y1;
+ linePt1.y = linePt2.y = y1;
+ unit = Vector(linePt1, linePt2).Unit();
+ Point p1 = linePt1 + (ortho * 10.0 * size);
+ Point p2 = linePt2 + (ortho * 10.0 * size);
+ Point p3 = linePt1 + (ortho * 16.0 * size);
+ Point p4 = linePt2 + (ortho * 16.0 * size);
+ Point p5 = position + (ortho * 4.0 * size);
+ Point p6 = endpoint + (ortho * 4.0 * size);
+#endif
+/*
+The numbers hardcoded into here, what are they?
+I believe they are pixels.
+*/
+#if 0
// Get our line parallel to our points
- Point p1 = position + (orthogonal * 10.0 * SCREEN_ZOOM);
- Point p2 = endpoint + (orthogonal * 10.0 * SCREEN_ZOOM);
-
- // Draw main dimension line
- painter->DrawLine(p1, p2);
+ Point p1 = position + (orthogonal * 10.0 * size);
+ Point p2 = endpoint + (orthogonal * 10.0 * size);
- Point p3 = position + (orthogonal * 16.0 * SCREEN_ZOOM);
- Point p4 = endpoint + (orthogonal * 16.0 * SCREEN_ZOOM);
- Point p5 = position + (orthogonal * 4.0 * SCREEN_ZOOM);
- Point p6 = endpoint + (orthogonal * 4.0 * SCREEN_ZOOM);
-
- // Draw extension lines
+ Point p3 = position + (orthogonal * 16.0 * size);
+ Point p4 = endpoint + (orthogonal * 16.0 * size);
+ Point p5 = position + (orthogonal * 4.0 * size);
+ Point p6 = endpoint + (orthogonal * 4.0 * size);
+#endif
+ // Draw extension lines (if certain type)
painter->DrawLine(p3, p5);
painter->DrawLine(p4, p6);
- painter->SetBrush(QBrush(QColor(Qt::blue)));
- painter->DrawArrowhead(p1, p2);
- painter->DrawArrowhead(p2, p1);
+ // Calculate whether or not the arrowheads are too crowded to put inside
+ // the extension lines. 9.0 is the length of the arrowhead.
+// double t = Geometry::ParameterOfLineAndPoint(position, endpoint, endpoint - (unit * 9.0 * size));
+// double t = Geometry::ParameterOfLineAndPoint(pos, endp, endp - (unit * 9.0 * size));
+ double t = Geometry::ParameterOfLineAndPoint(linePt1, linePt2, linePt2 - (unit * 9.0 * size));
+//printf("Dimension::Draw(): t = %lf\n", t);
+
+// On the screen, it's acting like this is actually 58%...
+// This is correct, we want it to happen at > 50%
+ if (t > 0.58)
+ {
+ // Draw main dimension line + arrowheads
+ painter->DrawLine(p1, p2);
+ painter->DrawArrowhead(p1, p2, size);
+ painter->DrawArrowhead(p2, p1, size);
+ }
+ else
+ {
+ // Draw outside arrowheads
+ Point p7 = p1 - (unit * 9.0 * size);
+ Point p8 = p2 + (unit * 9.0 * size);
+ painter->DrawArrowhead(p1, p7, size);
+ painter->DrawArrowhead(p2, p8, size);
+ painter->DrawLine(p1, p1 - (unit * 14.0 * size));
+ painter->DrawLine(p2, p2 + (unit * 14.0 * size));
+ }
// Draw length of dimension line...
- painter->SetFont(QFont("Arial", 10.0 * Painter::zoom * SCREEN_ZOOM));
+ painter->SetFont(QFont("Arial", 8.0 * Painter::zoom * size));
+#if 0
Vector v1((p1.x - p2.x) / 2.0, (p1.y - p2.y) / 2.0);
Point ctr = p2 + v1;
- // This is in pixels, which isn't even remotely correct... !!! FIX !!!
- QString dimText = QString("%1\"").arg(Vector(endpoint - position).Magnitude());
-// int textWidth = QFontMetrics(painter->font()).width(dimText);
-// int textHeight = QFontMetrics(painter->font()).height();
-#if 0
-//We have to do transformation voodoo to make the text come out readable and in correct orientation...
-//Some things to note here: if angle > 90 degrees, then we need to take the negative of the angle
-//for our text.
-painter->save();
-painter->translate(ctr.x, ctr.y);
-int yOffset = -8;
-//16 : printf("textHeight: %d\n", textHeight);
-
-//Fix text so it isn't upside down...
-if ((angle > PI * 0.5) && (angle < PI * 1.5))
-{
- angle += PI;
- yOffset = 18;
-}
+#else
+ Point ctr = p2 + (Vector(p2, p1) / 2.0);
+#endif
-painter->rotate(angle * RADIANS_TO_DEGREES);
-painter->scale(1.0, -1.0);
-//painter->translate(-textWidth / 2, -24);
-// painter->drawText(0, 0, textWidth, 20, Qt::AlignCenter, dimText);
- // This version draws the y-coord from the baseline of the font
- painter->DrawText(-textWidth / 2, yOffset, dimText);
-//painter->setPen(QPen(QColor(0xFF, 0x20, 0x20), 1.0, Qt::SolidLine));
-//painter->drawLine(20, 0, -20, 0);
-//painter->drawLine(0, 20, 0, -20);
-painter->restore();
+#if 0
+ QString dimText = QString("%1\"").arg(Vector(endpoint - position).Magnitude());
#else
-// painter->DrawText(QRectF(QPointF(ctr.x, ctr.y), QPointF(ctr.x + textWidth, ctr.y + textHeight)), Qt::AlignVCenter, dimText);
-// Now that we've taken our own good advice, maybe we should have the painter class
-// do a nice abstracted text draw routine? :-)
- painter->DrawAngledText(ctr, angle, dimText);
+ QString dimText;
+// double length = v.Magnitude();
+ double length = fabs(position.x - endpoint.x);
+
+ if (length < 12.0)
+ dimText = QString("%1\"").arg(length);
+ else
+ {
+ double feet = (double)((int)length / 12);
+ double inches = length - (feet * 12.0);
+
+ if (inches == 0)
+ dimText = QString("%1'").arg(feet);
+ else
+ dimText = QString("%1' %2\"").arg(feet).arg(inches);
+ }
#endif
-/*
-All of the preceeding makes me think that rather than try to compensate for Qt's unbelieveably
-AWFUL decision to go with a wrong-handed graphics subsystem, it may be better to just stuff
-all of that crap into some kind of subclass that handles all the nastiness behind the scenes.
-I mean, really, all this crap just to get some proplerly rendered text on the screen? How
-retarded is that? :-/
-*/
+ painter->DrawAngledText(ctr, angle, dimText, size);
+
+// need to make another handle drawing function in Painter, instead of this
+ if (hitLine)
+ {
+ Point p9 = ((position + endpoint) / 2.0) + (orthogonal * 14.0)
+ + (unit * 7.0);
+
+ Point p10 = p9 + (orthogonal * -7.0);
+ Point p11 = p10 + (unit * 7.0);
+ Point p12 = p11 + (orthogonal * 7.0);
+ Point p13 = p12 + (unit * -7.0);
+ painter->DrawLine(p10, p11);
+ painter->DrawLine(p11, p12);
+ painter->DrawLine(p12, p13);
+ painter->DrawLine(p13, p10);
+ }
}
}
-/*virtual*/ bool Dimension::Collided(Vector /*point*/)
+/*virtual*/ bool Dimension::Collided(Vector point)
{
-#if 0
+ // Someone told us to fuck off, so we'll fuck off. :-)
+ if (ignoreClicks)
+ return false;
+
+ // We can assume this, since this is a mouse down event here.
objectWasDragged = false;
- Vector lineSegment = endpoint - position;
- Vector v1 = point - position;
- Vector v2 = point - endpoint;
- double parameterizedPoint = lineSegment.Dot(v1) / lineSegment.Magnitude(), distance;
+ HitTest(point);
- // Geometric interpretation:
- // pp is the paremeterized point on the vector ls where the perpendicular intersects ls.
- // If pp < 0, then the perpendicular lies beyond the 1st endpoint. If pp > length of ls,
- // then the perpendicular lies beyond the 2nd endpoint.
+ // Now that we've done our hit testing on the non-snapped point, snap it if
+ // necessary...
+ if (snapToGrid)
+ point = SnapPointToGrid(point);
- if (parameterizedPoint < 0.0)
- distance = v1.Magnitude();
- else if (parameterizedPoint > lineSegment.Magnitude())
- distance = v2.Magnitude();
- else // distance = ?Det?(ls, v1) / |ls|
- distance = fabs((lineSegment.x * v1.y - v1.x * lineSegment.y) / lineSegment.Magnitude());
-
- // If the segment endpoints are s and e, and the point is p, then the test for the perpendicular
- // intercepting the segment is equivalent to insisting that the two dot products {s-e}.{s-p} and
- // {e-s}.{e-p} are both non-negative. Perpendicular distance from the point to the segment is
- // computed by first computing the area of the triangle the three points form, then dividing by the
- // length of the segment. Distances are done just by the Pythagorean theorem. Twice the area of the
- // triangle formed by three points is the determinant of the following matrix:
- //
- // sx sy 1
- // ex ey 1
- // px py 1
- //
- // By translating the start point to the origin, this can be rewritten as:
- // By subtracting row 1 from all rows, you get the following:
- // [because sx = sy = 0. you could leave out the -sx/y terms below. because we subtracted
- // row 1 from all rows (including row 1) row 1 turns out to be zero. duh!]
- //
- // 0 0 0 0 0 0
- // (ex - sx) (ey - sy) 0 ==> ex ey 0
- // (px - sx) (py - sy) 0 px py 0
- //
- // which greatly simplifies the calculation of the determinant.
-
- if (state == OSInactive)
+ if (hitPoint1)
{
-//printf("Line: pp = %lf, length = %lf, distance = %lf\n", parameterizedPoint, lineSegment.Magnitude(), distance);
-//printf(" v1.Magnitude = %lf, v2.Magnitude = %lf\n", v1.Magnitude(), v2.Magnitude());
-//printf(" point = %lf,%lf,%lf; p1 = %lf,%lf,%lf; p2 = %lf,%lf,%lf\n", point.x, point.y, point.z, position.x, position.y, position.z, endpoint.x, endpoint.y, endpoint.z);
-//printf(" \n", );
-//How to translate this into pixels from Document space???
-//Maybe we need to pass a scaling factor in here from the caller? That would make sense, as
-//the caller knows about the zoom factor and all that good kinda crap
- if (v1.Magnitude() < 10.0)
- {
- oldState = state;
- state = OSSelected;
- oldPoint = position; //maybe "position"?
- draggingHandle1 = true;
- return true;
- }
- else if (v2.Magnitude() < 10.0)
- {
- oldState = state;
- state = OSSelected;
- oldPoint = endpoint; //maybe "position"?
- draggingHandle2 = true;
- return true;
- }
- else if (distance < 2.0)
- {
- oldState = state;
- state = OSSelected;
- oldPoint = point;
- dragging = true;
- return true;
- }
+ oldState = state;
+ state = OSSelected;
+ oldPoint = position;
+ draggingHandle1 = true;
+ return true;
}
- else if (state == OSSelected)
+ else if (hitPoint2)
{
- // Here we test for collision with handles as well! (SOON!)
-/*
-Like so:
- if (v1.Magnitude() < 2.0) // Handle #1
- else if (v2.Magnitude() < 2.0) // Handle #2
-*/
- if (distance < 2.0)
- {
- oldState = state;
-// state = OSInactive;
- oldPoint = point;
- dragging = true;
- return true;
- }
+ oldState = state;
+ state = OSSelected;
+ oldPoint = endpoint;
+ draggingHandle2 = true;
+ return true;
}
-#endif
state = OSInactive;
return false;
}
-/*virtual*/ void Dimension::PointerMoved(Vector point)
+/*virtual*/ bool Dimension::PointerMoved(Vector point)
{
- // We know this is true because mouse move messages don't come here unless
- // the object was actually clicked on--therefore we *know* we're being
- // dragged...
- objectWasDragged = true;
-
- if (dragging)
+ if (selectionInProgress)
{
- // Here we need to check whether or not we're dragging a handle or the object itself...
- Vector delta = point - oldPoint;
-
- position += delta;
- endpoint += delta;
+ // Check for whether or not the rect contains this line
+ if (selection.contains(position.x, position.y)
+ && selection.contains(endpoint.x, endpoint.y))
+ state = OSSelected;
+ else
+ state = OSInactive;
- oldPoint = point;
- needUpdate = true;
+ return false;
}
- else if (draggingHandle1)
- {
- Vector delta = point - oldPoint;
- position += delta;
+ // Hit test tells us what we hit (if anything) through boolean variables. (It
+ // also tells us whether or not the state changed. --not any more)
+ SaveHitState();
+ bool hovered = HitTest(point);
+ needUpdate = HitStateChanged();
- oldPoint = point;
- needUpdate = true;
- }
- else if (draggingHandle2)
+ objectWasDragged = (/*draggingLine |*/ draggingHandle1 | draggingHandle2);
+
+ if (objectWasDragged)
{
Vector delta = point - oldPoint;
- endpoint += delta;
+ if (draggingHandle1)// || draggingLine)
+ position += delta;
+
+ if (draggingHandle2)// || draggingLine)
+ endpoint += delta;
oldPoint = point;
needUpdate = true;
}
- else
- needUpdate = false;
+
+ return hovered;
}
/*virtual*/ void Dimension::PointerReleased(void)
{
- if (draggingHandle1 || draggingHandle2)
+/* if (draggingHandle1 || draggingHandle2)
{
// Set the length (in case the global state was set to fixed (or not))
if (Object::fixedLength)
if (draggingHandle1) // startpoint
{
- Vector v = Vector(position - endpoint).Unit() * length;
+ Vector v = Vector(endpoint, position).Unit() * length;
position = endpoint + v;
}
else // endpoint
{
-// Vector v1 = endpoint - position;
- Vector v = Vector(endpoint - position).Unit() * length;
+ Vector v = Vector(position, endpoint).Unit() * length;
endpoint = position + v;
}
}
- else
+ else*/
{
// Otherwise, we calculate the new length, just in case on the next move
// it turns out to have a fixed length. :-)
length = Vector(endpoint - position).Magnitude();
}
- }
+/* }*/
dragging = false;
draggingHandle1 = false;
}
-void Dimension::SetPoint1(Vector * v)
+/*virtual*/ bool Dimension::HitTest(Point point)
{
- point1 = v;
- needUpdate = true;
+ Vector orthogonal = Vector::Normal(position, endpoint);
+ // Get our line parallel to our points
+#if 0
+ Point p1 = position + (orthogonal * 10.0 * size);
+ Point p2 = endpoint + (orthogonal * 10.0 * size);
+#else
+ Point p1 = linePt1 + (orthogonal * 10.0 * size);
+ Point p2 = linePt2 + (orthogonal * 10.0 * size);
+#endif
+ Point p3(p1, point);
+
+ hitPoint1 = hitPoint2 = hitLine = hitFlipSwitch = false;
+ Vector v1(position, point);
+ Vector v2(endpoint, point);
+// Vector lineSegment(position, endpoint);
+ Vector lineSegment(p1, p2);
+// double t = Geometry::ParameterOfLineAndPoint(position, endpoint, point);
+ double t = Geometry::ParameterOfLineAndPoint(p1, p2, point);
+ double distance;
+
+ if (t < 0.0)
+ distance = v1.Magnitude();
+ else if (t > 1.0)
+ distance = v2.Magnitude();
+ else
+ // distance = ?Det?(ls, v1) / |ls|
+// distance = fabs((lineSegment.x * v1.y - v1.x * lineSegment.y)
+ distance = fabs((lineSegment.x * p3.y - p3.x * lineSegment.y)
+ / lineSegment.Magnitude());
+
+ if ((v1.Magnitude() * Painter::zoom) < 8.0)
+ hitPoint1 = true;
+ else if ((v2.Magnitude() * Painter::zoom) < 8.0)
+ hitPoint2 = true;
+ else if ((distance * Painter::zoom) < 5.0)
+ hitLine = true;
+
+ return (hitPoint1 || hitPoint2 || hitLine ? true : false);
}
-void Dimension::SetPoint2(Vector * v)
+void Dimension::SaveHitState(void)
{
- point2 = v;
- needUpdate = true;
+ oldHitPoint1 = hitPoint1;
+ oldHitPoint2 = hitPoint2;
+ oldHitLine = hitLine;
+}
+
+
+bool Dimension::HitStateChanged(void)
+{
+ if ((hitPoint1 != oldHitPoint1) || (hitPoint2 != oldHitPoint2) || (hitLine != oldHitLine))
+ return true;
+
+ return false;
}
-Vector Dimension::GetPoint1(void)
+/*virtual*/ void Dimension::Enumerate(FILE * file)
{
- return position;
+ fprintf(file, "DIMENSION %i (%lf,%lf) (%lf,%lf) %i\n", layer, position.x, position.y, endpoint.x, endpoint.y, type);
}
-Vector Dimension::GetPoint2(void)
+/*virtual*/ Object * Dimension::Copy(void)
{
+#warning "!!! This doesn't take care of attached Dimensions !!!"
+/*
+This is a real problem. While having a pointer in the Dimension to this line's points
+is fast & easy, it creates a huge problem when trying to replicate an object like this.
+
+Maybe a way to fix that then, is to have reference numbers instead of pointers. That
+way, if you copy them, ... you might still have problems. Because you can't be sure if
+a copy will be persistant or not, you then *definitely* do not want them to have the
+same reference number.
+*/
+
+ Dimension * d = new Dimension(position, endpoint, dimensionType, parent);
+ d->size = size;
+ return d;
+}
+
+
+// Dimensions are special: they contain exactly *two* points. Here, we check
+// only for zero/non-zero in returning the correct points.
+/*virtual*/ Vector Dimension::GetPointAtParameter(double parameter)
+{
+ if (parameter == 0)
+ return position;
+
return endpoint;
}
-void Dimension::FlipSides(void)
+/*virtual*/ void Dimension::MovePointAtParameter(double parameter, Vector v)
+{
+ if (parameter == 0)
+ position += v;
+ else if (parameter == 1.0)
+ endpoint += v;
+ else
+ {} // Not sure how to handle this case :-P
+}
+
+#if 0
+/*virtual*/ void Dimension::Connect(Object * obj, double param)
+{
+ // There are four possibilities here...
+ // The param is only looking for 0 or 1 here.
+ if (point1.object == NULL && point2.object == NULL)
+ {
+ point1.object = obj;
+ point1.t = param;
+ }
+ else if (point1.object == NULL && point2.object != NULL)
+ {
+ if (point2.t == param)
+ point2.object = obj;
+ else
+ {
+ point1.object = obj;
+ point1.t = param;
+ }
+ }
+ else if (point1.object != NULL && point2.object == NULL)
+ {
+ if (point1.t == param)
+ point1.object = obj;
+ else
+ {
+ point2.object = obj;
+ point2.t = param;
+ }
+ }
+ else if (point1.object != NULL && point2.object != NULL)
+ {
+ if (point1.t == param)
+ point1.object = obj;
+ else
+ point2.object = obj;
+ }
+}
+
+
+/*virtual*/ void Dimension::Disconnect(Object * obj, double param)
+{
+ if (point1.object == obj && point1.t == param)
+ point1.object = NULL;
+ else if (point2.object == obj && point2.t == param)
+ point2.object = NULL;
+}
+
+
+/*virtual*/ void Dimension::DisconnectAll(Object * obj)
{
+ if (point1.object == obj)
+ point1.object = NULL;
+
+ if (point2.object == obj)
+ point2.object = NULL;
+}
+#endif
+
+/*virtual*/ QRectF Dimension::Extents(void)
+{
+ Point p1 = position;
+ Point p2 = endpoint;
+
+// if (point1.object)
+// p1 = point1.object->GetPointAtParameter(point1.t);
+//
+// if (point2.object)
+// p2 = point2.object->GetPointAtParameter(point2.t);
+
+ return QRectF(QPointF(p1.x, p1.y), QPointF(p2.x, p2.y));
+}
+
+
#if 0
+/*virtual*/ ObjectType Dimension::Type(void)
+{
+ return OTDimension;
+}
+#endif
+
+
+void Dimension::FlipSides(void)
+{
+#if 1
Vector tmp = position;
position = endpoint;
endpoint = tmp;
+//Not sure this matters...
+//#warning "!!! May need to swap parameter values on connected objects !!!"
#else
- Vector * tmp = point1;
+ Connection tmp = point1;
point1 = point2;
point2 = tmp;
+// double tmp = point1.t;
+// point1.t = point2.t;
+// point2.t = tmp;
+// Object * tmp = point1.object;
+// point1.object = point2.object;
+// point2.object = tmp;
#endif
needUpdate = true;
}
-
-/*virtual*/ void Dimension::Enumerate(FILE * file)
-{
- fprintf(file, "DIMENSION (%lf,%lf) (%lf,%lf) %i\n", position.x, position.y, endpoint.x, endpoint.y, type);
-}
-
projects / architektonas / blobdiff