//
// Originally by David Raingeard
// GCC/SDL port by Niels Wagenaar (Linux/WIN32) and Caz (BeOS)
-// Rewritten by James L. Hammons
+// Rewritten by James Hammons
// (C) 2010 Underground Software
//
-// JLH = James L. Hammons <jlhamm@acm.org>
+// JLH = James Hammons <jlhamm@acm.org>
//
// Who When What
// --- ---------- -------------------------------------------------------------
// JLH 01/16/2010 Created this log ;-)
+// JLH 04/30/2012 Changed SDL audio handler to run JERRY
//
// Need to set up defaults that the BIOS sets for the SSI here in DACInit()... !!! FIX !!!
// work correctly...! Perhaps just need to set up SSI stuff so BUTCH doesn't get
// confused...
-// ALSO: Need to implement some form of proper locking to replace the clusterfuck
-// that is the current spinlock implementation. Since the DSP is a separate
-// entity, could we get away with running it in the sound IRQ?
-
-// ALSO: It may be a good idea to physically separate the left and right buffers
-// to prevent things like the DSP filling only one side and such. Do such
-// mono modes exist on the Jag? Seems to according to Super Burnout.
+// After testing on a real Jaguar, it seems clear that the I2S interrupt drives
+// the audio subsystem. So while you can drive the audio at a *slower* rate than
+// set by SCLK, you can't drive it any *faster*. Also note, that if the I2S
+// interrupt is not enabled/running on the DSP, then there is no audio. Also,
+// audio can be muted by clearing bit 8 of JOYSTICK (JOY1).
+//
+// Approach: We can run the DSP in the host system's audio IRQ, by running the
+// DSP for the alloted time (depending on the host buffer size & sample rate)
+// by simply reading the L/R_I2S (L/RTXD) registers at regular intervals. We
+// would also have to time the I2S/TIMER0/TIMER1 interrupts in the DSP as well.
+// This way, we can run the host audio IRQ at, say, 48 KHz and not have to care
+// so much about SCLK and running a separate buffer and all the attendant
+// garbage that comes with that awful approach.
+//
+// There would still be potential gotchas, as the SCLK can theoretically drive
+// the I2S at 26590906 / 2 (for SCLK == 0) = 13.3 MHz which corresponds to an
+// audio rate 416 KHz (dividing the I2S rate by 32, for 16-bit stereo). It
+// seems doubtful that anything useful could come of such a high rate, and we
+// can probably safely ignore any such ridiculously high audio rates. It won't
+// sound the same as on a real Jaguar, but who cares? :-)
#include "dac.h"
#include "SDL.h"
-//#include "gui.h"
+#include "cdrom.h"
+#include "dsp.h"
+#include "event.h"
+#include "jerry.h"
#include "jaguar.h"
#include "log.h"
-#include "m68k.h"
+#include "m68000/m68kinterface.h"
//#include "memory.h"
#include "settings.h"
+
//#define DEBUG_DAC
-#define BUFFER_SIZE 0x10000 // Make the DAC buffers 64K x 16 bits
+#define BUFFER_SIZE 0x10000 // Make the DAC buffers 64K x 16 bits
+#define DAC_AUDIO_RATE 48000 // Set the audio rate to 48 KHz
// Jaguar memory locations
// Global variables
-//uint16 lrxd, rrxd; // I2S ports (into Jaguar)
+// These are defined in memory.h/cpp
+//uint16_t lrxd, rrxd; // I2S ports (into Jaguar)
// Local variables
-static uint32 LeftFIFOHeadPtr, LeftFIFOTailPtr, RightFIFOHeadPtr, RightFIFOTailPtr;
static SDL_AudioSpec desired;
-static bool SDLSoundInitialized = false;
-
-// We can get away with using native endian here because we can tell SDL to use the native
-// endian when looking at the sample buffer, i.e., no need to worry about it.
-
-static uint16 DACBuffer[BUFFER_SIZE];
-static uint8 SCLKFrequencyDivider = 19; // Default is roughly 22 KHz (20774 Hz in NTSC mode)
-/*static*/ uint16 serialMode = 0;
+static bool SDLSoundInitialized;
+//static uint8_t SCLKFrequencyDivider = 19; // Default is roughly 22 KHz (20774 Hz in NTSC mode)
+// /*static*/ uint16_t serialMode = 0;
// Private function prototypes
void SDLSoundCallback(void * userdata, Uint8 * buffer, int length);
-int GetCalculatedFrequency(void);
+void DSPSampleCallback(void);
+
//
// Initialize the SDL sound system
//
void DACInit(void)
{
-// memory_malloc_secure((void **)&DACBuffer, BUFFER_SIZE * sizeof(uint16), "DAC buffer");
-// DACBuffer = (uint16 *)memory_malloc(BUFFER_SIZE * sizeof(uint16), "DAC buffer");
+ SDLSoundInitialized = false;
+
+// if (!vjs.audioEnabled)
+ if (!vjs.DSPEnabled)
+ {
+ WriteLog("DAC: DSP/host audio playback disabled.\n");
+ return;
+ }
- desired.freq = GetCalculatedFrequency(); // SDL will do conversion on the fly, if it can't get the exact rate. Nice!
- desired.format = AUDIO_S16SYS; // This uses the native endian (for portability)...
+ desired.freq = DAC_AUDIO_RATE;
+ desired.format = AUDIO_S16SYS;
desired.channels = 2;
-// desired.samples = 4096; // Let's try a 4K buffer (can always go lower)
- desired.samples = 2048; // Let's try a 2K buffer (can always go lower)
+ desired.samples = 2048; // 2K buffer = audio delay of 42.67 ms (@ 48 KHz)
desired.callback = SDLSoundCallback;
- if (SDL_OpenAudio(&desired, NULL) < 0) // NULL means SDL guarantees what we want
+ if (SDL_OpenAudio(&desired, NULL) < 0) // NULL means SDL guarantees what we want
WriteLog("DAC: Failed to initialize SDL sound...\n");
else
{
SDLSoundInitialized = true;
DACReset();
- SDL_PauseAudio(false); // Start playback!
- WriteLog("DAC: Successfully initialized.\n");
+ SDL_PauseAudio(false); // Start playback!
+ WriteLog("DAC: Successfully initialized. Sample rate: %u\n", desired.freq);
}
+
+ ltxd = lrxd = desired.silence;
+ sclk = 19; // Default is roughly 22 KHz
+
+ uint32_t riscClockRate = (vjs.hardwareTypeNTSC ? RISC_CLOCK_RATE_NTSC : RISC_CLOCK_RATE_PAL);
+ uint32_t cyclesPerSample = riscClockRate / DAC_AUDIO_RATE;
+ WriteLog("DAC: RISC clock = %u, cyclesPerSample = %u\n", riscClockRate, cyclesPerSample);
}
+
//
// Reset the sound buffer FIFOs
//
void DACReset(void)
{
- LeftFIFOHeadPtr = LeftFIFOTailPtr = 0, RightFIFOHeadPtr = RightFIFOTailPtr = 1;
+// LeftFIFOHeadPtr = LeftFIFOTailPtr = 0, RightFIFOHeadPtr = RightFIFOTailPtr = 1;
+ ltxd = lrxd = desired.silence;
+}
+
+
+//
+// Pause/unpause the SDL audio thread
+//
+void DACPauseAudioThread(bool state/*= true*/)
+{
+ SDL_PauseAudio(state);
}
+
//
// Close down the SDL sound subsystem
//
SDL_CloseAudio();
}
-// memory_free(DACBuffer);
WriteLog("DAC: Done.\n");
}
+
+// Approach: Run the DSP for however many cycles needed to correspond to whatever sample rate
+// we've set the audio to run at. So, e.g., if we run it at 48 KHz, then we would run the DSP
+// for however much time it takes to fill the buffer. So with a 2K buffer, this would correspond
+// to running the DSP for 0.042666... seconds. At 26590906 Hz, this would correspond to
+// running the DSP for 1134545 cycles. You would then sample the L/RTXD registers every
+// 1134545 / 2048 = 554 cycles to fill the buffer. You would also have to manage interrupt
+// timing as well (generating them at the proper times), but that shouldn't be too difficult...
+// If the DSP isn't running, then fill the buffer with L/RTXD and exit.
+
//
// SDL callback routine to fill audio buffer
//
// Note: The samples are packed in the buffer in 16 bit left/16 bit right pairs.
+// Also, length is the length of the buffer in BYTES
//
+static Uint8 * sampleBuffer;
+static int bufferIndex = 0;
+static int numberOfSamples = 0;
+static bool bufferDone = false;
void SDLSoundCallback(void * userdata, Uint8 * buffer, int length)
{
- // Clear the buffer to silence, in case the DAC buffer is empty (or short)
-//This causes choppy sound... Ick.
- memset(buffer, desired.silence, length);
-//WriteLog("DAC: Inside callback...\n");
- if (LeftFIFOHeadPtr != LeftFIFOTailPtr)
+ // 1st, check to see if the DSP is running. If not, fill the buffer with L/RXTD and exit.
+
+ if (!DSPIsRunning())
{
-//WriteLog("DAC: About to write some data!\n");
- int numLeftSamplesReady
- = (LeftFIFOTailPtr + (LeftFIFOTailPtr < LeftFIFOHeadPtr ? BUFFER_SIZE : 0))
- - LeftFIFOHeadPtr;
- int numRightSamplesReady
- = (RightFIFOTailPtr + (RightFIFOTailPtr < RightFIFOHeadPtr ? BUFFER_SIZE : 0))
- - RightFIFOHeadPtr;
-//This waits for the slower side to catch up. If writing only one side, then this
-//causes the buffer not to drain...
- int numSamplesReady
- = (numLeftSamplesReady < numRightSamplesReady
- ? numLeftSamplesReady : numRightSamplesReady);//Hmm. * 2;
-
-//Kludge, until I can figure out WTF is going on WRT Super Burnout.
-if (numLeftSamplesReady == 0 || numRightSamplesReady == 0)
- numSamplesReady = numLeftSamplesReady + numRightSamplesReady;
-
-//The numbers look good--it's just that the DSP can't get enough samples in the DAC buffer!
-//WriteLog("DAC: Left/RightFIFOHeadPtr: %u/%u, Left/RightFIFOTailPtr: %u/%u\n", LeftFIFOHeadPtr, RightFIFOHeadPtr, LeftFIFOTailPtr, RightFIFOTailPtr);
-//WriteLog(" numLeft/RightSamplesReady: %i/%i, numSamplesReady: %i, length of buffer: %i\n", numLeftSamplesReady, numRightSamplesReady, numSamplesReady, length);
-
-/* if (numSamplesReady > length)
- numSamplesReady = length;//*/
- if (numSamplesReady > length / 2) // length / 2 because we're comparing 16-bit lengths
- numSamplesReady = length / 2;
-//else
-// WriteLog(" Not enough samples to fill the buffer (short by %u L/R samples)...\n", (length / 2) - numSamplesReady);
-//WriteLog("DAC: %u samples ready.\n", numSamplesReady);
-
- // Actually, it's a bit more involved than this, but this is the general idea:
-// memcpy(buffer, DACBuffer, length);
- for(int i=0; i<numSamplesReady; i++)
- ((uint16 *)buffer)[i] = DACBuffer[(LeftFIFOHeadPtr + i) % BUFFER_SIZE];
- // Could also use (as long as BUFFER_SIZE is a multiple of 2):
-// buffer[i] = DACBuffer[(LeftFIFOHeadPtr + i) & (BUFFER_SIZE - 1)];
-
- LeftFIFOHeadPtr = (LeftFIFOHeadPtr + numSamplesReady) % BUFFER_SIZE;
- RightFIFOHeadPtr = (RightFIFOHeadPtr + numSamplesReady) % BUFFER_SIZE;
- // Could also use (as long as BUFFER_SIZE is a multiple of 2):
-// LeftFIFOHeadPtr = (LeftFIFOHeadPtr + numSamplesReady) & (BUFFER_SIZE - 1);
-// RightFIFOHeadPtr = (RightFIFOHeadPtr + numSamplesReady) & (BUFFER_SIZE - 1);
-//WriteLog(" -> Left/RightFIFOHeadPtr: %04X/%04X, Left/RightFIFOTailPtr: %04X/%04X\n", LeftFIFOHeadPtr, RightFIFOHeadPtr, LeftFIFOTailPtr, RightFIFOTailPtr);
+ for(int i=0; i<(length/2); i+=2)
+ {
+ ((uint16_t *)buffer)[i + 0] = ltxd;
+ ((uint16_t *)buffer)[i + 1] = rtxd;
+ }
+
+ return;
}
-//Hmm. Seems that the SDL buffer isn't being starved by the DAC buffer...
-// else
-// WriteLog("DAC: Silence...!\n");
+
+ // The length of time we're dealing with here is 1/48000 s, so we multiply this
+ // by the number of cycles per second to get the number of cycles for one sample.
+// uint32_t riscClockRate = (vjs.hardwareTypeNTSC ? RISC_CLOCK_RATE_NTSC : RISC_CLOCK_RATE_PAL);
+// uint32_t cyclesPerSample = riscClockRate / DAC_AUDIO_RATE;
+ // This is the length of time
+// timePerSample = (1000000.0 / (double)riscClockRate) * ();
+
+ // Now, run the DSP for that length of time for each sample we need to make
+
+ bufferIndex = 0;
+ sampleBuffer = buffer;
+// If length is the length of the sample buffer in BYTES, then shouldn't the # of
+// samples be / 4? No, because we bump the sample count by 2, so this is OK.
+ numberOfSamples = length / 2;
+ bufferDone = false;
+
+ SetCallbackTime(DSPSampleCallback, 1000000.0 / (double)DAC_AUDIO_RATE, EVENT_JERRY);
+
+ // These timings are tied to NTSC, need to fix that in event.cpp/h! [FIXED]
+ do
+ {
+ double timeToNextEvent = GetTimeToNextEvent(EVENT_JERRY);
+
+ if (vjs.DSPEnabled)
+ {
+ if (vjs.usePipelinedDSP)
+ DSPExecP2(USEC_TO_RISC_CYCLES(timeToNextEvent));
+ else
+ DSPExec(USEC_TO_RISC_CYCLES(timeToNextEvent));
+ }
+
+ HandleNextEvent(EVENT_JERRY);
+ }
+ while (!bufferDone);
}
+
+void DSPSampleCallback(void)
+{
+ ((uint16_t *)sampleBuffer)[bufferIndex + 0] = ltxd;
+ ((uint16_t *)sampleBuffer)[bufferIndex + 1] = rtxd;
+ bufferIndex += 2;
+
+ if (bufferIndex == numberOfSamples)
+ {
+ bufferDone = true;
+ return;
+ }
+
+ SetCallbackTime(DSPSampleCallback, 1000000.0 / (double)DAC_AUDIO_RATE, EVENT_JERRY);
+}
+
+
+#if 0
//
-// Calculate the freq9uency of SCLK * 32 using the divider
+// Calculate the frequency of SCLK * 32 using the divider
//
int GetCalculatedFrequency(void)
{
// 16 bits of left data + 16 bits of right data = 32 bits, 1 SCLK = 1 bit transferred).
return systemClockFrequency / (32 * (2 * (SCLKFrequencyDivider + 1)));
}
+#endif
+
//
// LTXD/RTXD/SCLK/SMODE ($F1A148/4C/50/54)
//
-void DACWriteByte(uint32 offset, uint8 data, uint32 who/*= UNKNOWN*/)
+void DACWriteByte(uint32_t offset, uint8_t data, uint32_t who/*= UNKNOWN*/)
{
WriteLog("DAC: %s writing BYTE %02X at %08X\n", whoName[who], data, offset);
if (offset == SCLK + 3)
- DACWriteWord(offset - 3, (uint16)data);
+ DACWriteWord(offset - 3, (uint16_t)data);
}
-void DACWriteWord(uint32 offset, uint16 data, uint32 who/*= UNKNOWN*/)
+
+void DACWriteWord(uint32_t offset, uint16_t data, uint32_t who/*= UNKNOWN*/)
{
if (offset == LTXD + 2)
{
- // Spin until buffer has been drained (for too fast processors!)...
-//Small problem--if Head == 0 and Tail == buffer end, then this will fail... !!! FIX !!!
-//[DONE]
- // Also, we're taking advantage of the fact that the buffer is a multiple of two
- // in this check...
-uint32 spin = 0;
- while (((LeftFIFOTailPtr + 2) & (BUFFER_SIZE - 1)) == LeftFIFOHeadPtr)//;
- {
-spin++;
-//if ((spin & 0x0FFFFFFF) == 0)
-// WriteLog("Tail=%X, Head=%X, BUFFER_SIZE-1=%X\n", RightFIFOTailPtr, RightFIFOHeadPtr, BUFFER_SIZE - 1);
-
-if (spin == 0xFFFF0000)
-{
-uint32 ltail = LeftFIFOTailPtr, lhead = LeftFIFOHeadPtr;
-WriteLog("Tail=%X, Head=%X", ltail, lhead);
-
- WriteLog("\nStuck in left DAC spinlock! Aborting!\n");
- WriteLog("LTail=%X, LHead=%X, BUFFER_SIZE-1=%X\n", LeftFIFOTailPtr, LeftFIFOHeadPtr, BUFFER_SIZE - 1);
- WriteLog("RTail=%X, RHead=%X, BUFFER_SIZE-1=%X\n", RightFIFOTailPtr, RightFIFOHeadPtr, BUFFER_SIZE - 1);
- WriteLog("From while: Tail=%X, Head=%X", (LeftFIFOTailPtr + 2) & (BUFFER_SIZE - 1), LeftFIFOHeadPtr);
-// LogDone();
-// exit(0);
-#warning "Reimplement GUICrashGracefully!"
-// GUICrashGracefully("Stuck in left DAC spinlock!");
- return;
-}
- }//*/
-
- SDL_LockAudio(); // Is it necessary to do this? Mebbe.
- // We use a circular buffer 'cause it's easy. Note that the callback function
- // takes care of dumping audio to the soundcard...! Also note that we're writing
- // the samples in the buffer in an interleaved L/R format.
- LeftFIFOTailPtr = (LeftFIFOTailPtr + 2) % BUFFER_SIZE;
- DACBuffer[LeftFIFOTailPtr] = data;
- SDL_UnlockAudio();
+ ltxd = data;
}
else if (offset == RTXD + 2)
{
-/*
-Here's what's happening now:
-
-Stuck in right DAC spinlock!
-Aborting!
-
-Tail=681, Head=681, BUFFER_SIZE-1=FFFF
-From while: Tail=683, Head=681
-
-????? What the FUCK ?????
-
-& when I uncomment the lines below spin++; it *doesn't* lock here... WTF?????
-
-I think it was missing parentheses causing the fuckup... Seems to work now...
-
-Except for Super Burnout now...! Aarrrgggghhhhh!
-
-Tail=AC, Head=AE
-Stuck in left DAC spinlock! Aborting!
-Tail=AC, Head=AE, BUFFER_SIZE-1=FFFF
-From while: Tail=AE, Head=AE
-
-So it's *really* stuck here in the left FIFO. Figure out why!!!
-
-Prolly 'cause it doesn't set the sample rate right away--betcha it works with the BIOS...
-It gets farther, but then locks here (weird!):
-
-Tail=2564, Head=2566
-Stuck in left DAC spinlock! Aborting!
-Tail=2564, Head=2566, BUFFER_SIZE-1=FFFF
-From while: Tail=2566, Head=2566
-
-Weird--recompile with more WriteLog() entries and it *doesn't* lock...
-Yeah, because there was no DSP running. Duh!
-
-Tail=AC, Head=AE
-Stuck in left DAC spinlock! Aborting!
-LTail=AC, LHead=AE, BUFFER_SIZE-1=FFFF
-RTail=AF, RHead=AF, BUFFER_SIZE-1=FFFF
-From while: Tail=AE, Head=AE
-
-Odd: The right FIFO is empty, but the left FIFO is full!
-And this is what is causing the lockup--the DAC callback waits for the side with
-less samples ready and in this case it's the right channel (that never fills up)
-that it's waiting for...!
-
-Okay, with the kludge in place for the right channel not being filled, we select
-a track and then it locks here:
-
-Tail=60D8, Head=60DA
-Stuck in left DAC spinlock! Aborting!
-LTail=60D8, LHead=60D8, BUFFER_SIZE-1=FFFF
-RTail=DB, RHead=60D9, BUFFER_SIZE-1=FFFF
-From while: Tail=60DA, Head=60D8
-*/
-#warning Spinlock problem--!!! FIX !!!
-#warning Odd: The right FIFO is empty, but the left FIFO is full!
- // Spin until buffer has been drained (for too fast processors!)...
-uint32 spin = 0;
- while (((RightFIFOTailPtr + 2) & (BUFFER_SIZE - 1)) == RightFIFOHeadPtr)//;
- {
-spin++;
-//if ((spin & 0x0FFFFFFF) == 0)
-// WriteLog("Tail=%X, Head=%X, BUFFER_SIZE-1=%X\n", RightFIFOTailPtr, RightFIFOHeadPtr, BUFFER_SIZE - 1);
-
-if (spin == 0xFFFF0000)
-{
-uint32 rtail = RightFIFOTailPtr, rhead = RightFIFOHeadPtr;
-WriteLog("Tail=%X, Head=%X", rtail, rhead);
-
- WriteLog("\nStuck in right DAC spinlock! Aborting!\n");
- WriteLog("LTail=%X, LHead=%X, BUFFER_SIZE-1=%X\n", LeftFIFOTailPtr, LeftFIFOHeadPtr, BUFFER_SIZE - 1);
- WriteLog("RTail=%X, RHead=%X, BUFFER_SIZE-1=%X\n", RightFIFOTailPtr, RightFIFOHeadPtr, BUFFER_SIZE - 1);
- WriteLog("From while: Tail=%X, Head=%X", (RightFIFOTailPtr + 2) & (BUFFER_SIZE - 1), RightFIFOHeadPtr);
-// LogDone();
-// exit(0);
-#warning "Reimplement GUICrashGracefully!"
-// GUICrashGracefully("Stuck in right DAC spinlock!");
- return;
-}
- }//*/
-
- SDL_LockAudio();
- RightFIFOTailPtr = (RightFIFOTailPtr + 2) % BUFFER_SIZE;
- DACBuffer[RightFIFOTailPtr] = data;
- SDL_UnlockAudio();
-/*#ifdef DEBUG_DAC
- else
- WriteLog("DAC: Ran into FIFO's right tail pointer!\n");
-#endif*/
+ rtxd = data;
}
else if (offset == SCLK + 2) // Sample rate
{
- WriteLog("DAC: Writing %u to SCLK...\n", data);
- if ((uint8)data != SCLKFrequencyDivider)
- {
- SCLKFrequencyDivider = (uint8)data;
-//Of course a better way would be to query the hardware to find the upper limit...
- if (data > 7) // Anything less than 8 is too high!
- {
- if (SDLSoundInitialized)
- SDL_CloseAudio();
-
- desired.freq = GetCalculatedFrequency();// SDL will do conversion on the fly, if it can't get the exact rate. Nice!
- WriteLog("DAC: Changing sample rate to %u Hz!\n", desired.freq);
-
- if (SDLSoundInitialized)
- {
- if (SDL_OpenAudio(&desired, NULL) < 0) // NULL means SDL guarantees what we want
- {
-// This is bad, Bad, BAD !!! DON'T ABORT BECAUSE WE DIDN'T GET OUR FREQ! !!! FIX !!!
-#warning !!! FIX !!! Aborting because of SDL audio problem is bad!
- WriteLog("DAC: Failed to initialize SDL sound: %s.\nDesired freq: %u\nShutting down!\n", SDL_GetError(), desired.freq);
-// LogDone();
-// exit(1);
-#warning "Reimplement GUICrashGracefully!"
-// GUICrashGracefully("Failed to initialize SDL sound!");
- return;
- }
- }
-
- DACReset();
-
- if (SDLSoundInitialized)
- SDL_PauseAudio(false); // Start playback!
- }
- }
+ WriteLog("DAC: Writing %u to SCLK (by %s)...\n", data, whoName[who]);
+
+ sclk = data & 0xFF;
+ JERRYI2SInterruptTimer = -1;
+ RemoveCallback(JERRYI2SCallback);
+ JERRYI2SCallback();
}
else if (offset == SMODE + 2)
{
- serialMode = data;
+// serialMode = data;
+ smode = data;
WriteLog("DAC: %s writing to SMODE. Bits: %s%s%s%s%s%s [68K PC=%08X]\n", whoName[who],
(data & 0x01 ? "INTERNAL " : ""), (data & 0x02 ? "MODE " : ""),
(data & 0x04 ? "WSEN " : ""), (data & 0x08 ? "RISING " : ""),
}
}
+
//
// LRXD/RRXD/SSTAT ($F1A148/4C/50)
//
-uint8 DACReadByte(uint32 offset, uint32 who/*= UNKNOWN*/)
+uint8_t DACReadByte(uint32_t offset, uint32_t who/*= UNKNOWN*/)
{
// WriteLog("DAC: %s reading byte from %08X\n", whoName[who], offset);
return 0xFF;
}
-//static uint16 fakeWord = 0;
-uint16 DACReadWord(uint32 offset, uint32 who/*= UNKNOWN*/)
+
+//static uint16_t fakeWord = 0;
+uint16_t DACReadWord(uint32_t offset, uint32_t who/*= UNKNOWN*/)
{
// WriteLog("DAC: %s reading word from %08X\n", whoName[who], offset);
// return 0xFFFF;
return 0xFFFF; // May need SSTAT as well... (but may be a Jaguar II only feature)
}
+