bool big_pix, bool cmpdst, uint8 daddasel, uint8 daddbsel, uint8 daddmode, bool daddq_sel, uint8 data_sel,
uint8 dbinh, uint8 dend, uint8 dstart, uint64 dstd, uint32 iinc, uint8 lfu_func, uint64 &patd, bool patdadd,
bool phrase_mode, uint64 srcd, bool srcdread, bool srczread, bool srcz2add, uint8 zmode,
- bool bcompen, bool bkgwren, bool dcompen, uint8 icount, uint8 pixsize);
+ bool bcompen, bool bkgwren, bool dcompen, uint8 icount, uint8 pixsize,
+ uint64 &srcz, uint64 dstz, uint32 zinc);
void COMP_CTRL(uint8 &dbinh, bool &nowrite,
bool bcompen, bool big_pix, bool bkgwren, uint8 dcomp, bool dcompen, uint8 icount,
uint8 pixsize, bool phrase_mode, uint8 srcd, uint8 zcomp);
//Start of Hover Strike (clearing screen):
&& cmd != 0x00010000 // PATDSEL
//Hover Strike text:
- && cmd != 0x1401060C // SRCENX DSTEN UPDA1 UPDA2 PATDSEL BCOMPEN BKGWREN
+// && cmd != 0x1401060C // SRCENX DSTEN UPDA1 UPDA2 PATDSEL BCOMPEN BKGWREN
+//Hover Strike 3D stuff
+ && cmd != 0x01902839 // SRCEN DSTEN DSTENZ DSTWRZ DSTA2 GOURZ ZMODE=4 LFUFUNC=C
//Trevor McFur stuff:
&& cmd != 0x05810601 // SRCEN UPDA1 UPDA2 PATDSEL BCOMPEN
&& cmd != 0x01800201 // SRCEN UPDA1 LFUFUNC=C
&& cmd != 0x00011040 // CLIP_A1 GOURD PATDSEL
)
logBlit = true;//*/
+//logBlit = true;
if (blit_start_log == 0) // Wait for the signal...
logBlit = false;//*/
/*
logBlit = F, cmd = 00011040
logBlit = F, cmd = 01800005 *
logBlit = F, cmd = 09800741 *
+Hover Strike mission selection screen:
+Blit! (CMD = 01902839) // SRCEN DSTEN DSTENZ DSTWRZ DSTA2 GOURZ ZMODE=4 LFUFUNC=C
*/
//printf("logBlit = %s, cmd = %08X\n", (logBlit ? "T" : "F"), cmd);
srcd2 = srcd1;
srcd1 = ((uint64)JaguarReadLong(address, BLITTER) << 32) | (uint64)JaguarReadLong(address + 4, BLITTER);
//Kludge to take pixel size into account...
+//Hmm. If we're not in phrase mode, this is most likely NOT going to be used...
+//Actually, it would be--because of BCOMPEN expansion, for example...
if (!phrase_mode)
{
if (pixsize == 5)
srcd1 >>= 48;
else
srcd1 >>= 56;
-}
+}//*/
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Entering SZREADX state...\n");
+printf(" Entering SZREADX state...");
fflush(stdout);
}
+#endif
+ srcz2 = srcz1;
+ srcz1 = ((uint64)JaguarReadLong(address, BLITTER) << 32) | (uint64)JaguarReadLong(address + 4, BLITTER);
+#ifdef VERBOSE_BLITTER_LOGGING
+if (logBlit)
+{
+ printf(" Src Z extra read address/pix address: %08X/%1X [%08X%08X]\n", address, pixAddr,
+ (uint32)(dstz >> 32), (uint32)(dstz & 0xFFFFFFFF));
+ fflush(stdout);
+}
#endif
}
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Entering SZREAD state...\n");
+printf(" Entering SZREAD state...");
fflush(stdout);
}
+#endif
+ srcz2 = srcz1;
+ srcz1 = ((uint64)JaguarReadLong(address, BLITTER) << 32) | (uint64)JaguarReadLong(address + 4, BLITTER);
+//Kludge to take pixel size into account... I believe that it only has to take 16BPP mode into account. Not sure tho.
+if (!phrase_mode && pixsize == 4)
+ srcz1 >>= 48;
+
+#ifdef VERBOSE_BLITTER_LOGGING
+if (logBlit)
+{
+ printf(" Src Z read address/pix address: %08X/%1X [%08X%08X]\n", address, pixAddr,
+ (uint32)(dstz >> 32), (uint32)(dstz & 0xFFFFFFFF));
+ fflush(stdout);
+}
#endif
}
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Entering DREAD state...\n");
+printf(" Entering DREAD state...");
fflush(stdout);
}
#endif
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Dest read address/pix address: %08X/%1X [%08X%08X]\n", address, pixAddr,
+printf(" Dest read address/pix address: %08X/%1X [%08X%08X]\n", address, pixAddr,
(uint32)(dstd >> 32), (uint32)(dstd & 0xFFFFFFFF));
fflush(stdout);
}
}
#endif
dstz = ((uint64)JaguarReadLong(address, BLITTER) << 32) | (uint64)JaguarReadLong(address + 4, BLITTER);
+//Kludge to take pixel size into account... I believe that it only has to take 16BPP mode into account. Not sure tho.
+if (!phrase_mode && pixsize == 4)
+ dstz >>= 48;
+
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
#endif
}
+// These vars should probably go further up in the code... !!! FIX !!!
+// We can't preassign these unless they're static...
+//uint64 srcz = 0; // These are assigned to shut up stupid compiler warnings--dwrite is ALWAYS asserted
+//bool winhibit = false;
+uint64 srcz;
+bool winhibit;
//NOTE: SRCSHADE requires GOURZ to be set to work properly--another Jaguar I bug
if (dwrite)
{
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Entering DWRITE state...\n");
+printf(" Entering DWRITE state...");
fflush(stdout);
}
#endif
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Dest write address/pix address: %08X/%1X", address, pixAddr);
-printf(" [dstart=%X dend=%X pwidth=%X srcshift=%X]", dstart, dend, pwidth, srcshift);
-fflush(stdout);
-printf("[daas=%X dabs=%X dam=%X ds=%X daq=%s]", daddasel, daddbsel, daddmode, data_sel, (daddq_sel ? "T" : "F"));
-fflush(stdout);
+ printf(" Dest write address/pix address: %08X/%1X", address, pixAddr);
+ fflush(stdout);
}
#endif
if (srcshift == 0)
srcd = srcd1;
+//Z DATA() stuff done here... And it has to be done before any Z shifting...
+//Note that we need to have phrase mode start/end support here... (Not since we moved it from dzwrite...!)
+/*
+Here are a couple of Cybermorph blits with Z:
+$00113078 // DSTEN DSTENZ DSTWRZ CLIP_A1 GOURD GOURZ PATDSEL ZMODE=4
+$09900F39 // SRCEN DSTEN DSTENZ DSTWRZ UPDA1 UPDA1F UPDA2 DSTA2 ZMODE=4 LFUFUNC=C DCOMPEN
+
+We're having the same phrase mode overwrite problem we had with the pixels... !!! FIX !!!
+Odd. It's equating 0 with 0... Even though ZMODE is $04 (less than)!
+*/
+if (gourz)
+{
+/*
+void ADDARRAY(uint16 * addq, uint8 daddasel, uint8 daddbsel, uint8 daddmode,
+ uint64 dstd, uint32 iinc, uint8 initcin[], uint64 initinc, uint16 initpix,
+ uint32 istep, uint64 patd, uint64 srcd, uint64 srcz1, uint64 srcz2,
+ uint32 zinc, uint32 zstep)
+*/
+ uint16 addq[4];
+ uint8 initcin[4] = { 0, 0, 0, 0 };
+ ADDARRAY(addq, 7/*daddasel*/, 6/*daddbsel*/, 0/*daddmode*/, 0, 0, initcin, 0, 0, 0, 0, 0, srcz1, srcz2, zinc, 0);
+ srcz2 = ((uint64)addq[3] << 48) | ((uint64)addq[2] << 32) | ((uint64)addq[1] << 16) | (uint64)addq[0];
+ ADDARRAY(addq, 6/*daddasel*/, 7/*daddbsel*/, 1/*daddmode*/, 0, 0, initcin, 0, 0, 0, 0, 0, srcz1, srcz2, zinc, 0);
+ srcz1 = ((uint64)addq[3] << 48) | ((uint64)addq[2] << 32) | ((uint64)addq[1] << 16) | (uint64)addq[0];
+
+#ifdef VERBOSE_BLITTER_LOGGING
+if (logBlit)
+{
+ printf("\n[srcz1=%08X%08X, srcz2=%08X%08X, zinc=%08X",
+ (uint32)(srcz1 >> 32), (uint32)(srcz1 & 0xFFFFFFFF),
+ (uint32)(srcz2 >> 32), (uint32)(srcz2 & 0xFFFFFFFF), zinc);
+ fflush(stdout);
+}
+#endif
+}
+
+uint8 zSrcShift = srcshift & 0x30;
+srcz = (srcz2 << (64 - zSrcShift)) | (srcz1 >> zSrcShift);
+//bleh, ugly ugly ugly
+if (zSrcShift == 0)
+ srcz = srcz1;
+
+#ifdef VERBOSE_BLITTER_LOGGING
+if (logBlit)
+{
+ printf(" srcz=%08X%08X]\n", (uint32)(srcz >> 32), (uint32)(srcz & 0xFFFFFFFF));
+ fflush(stdout);
+}
+#endif
+
//When in SRCSHADE mode, it adds the IINC to the read source (from LFU???)
//According to following line, it gets LFU mode. But does it feed the source into the LFU
//after the add?
//Temporary kludge, to see if the fractional pattern does anything...
//This works, BTW
//But it seems to mess up in Cybermorph... the shading should be smooth but it isn't...
-//Seems the carry out is lost again... !!! FIX !!!
+//Seems the carry out is lost again... !!! FIX !!! [DONE--see below]
if (patfadd)
{
uint16 addq[4];
//Note that we still don't take atick[0] & [1] into account here, so this will skip half of the data needed... !!! FIX !!!
//Not yet enumerated: dbinh, srcdread, srczread
+//Also, should do srcshift on the z value in phrase mode... !!! FIX !!! [DONE]
+//As well as add a srcz variable we can set external to this state... !!! FIX !!! [DONE]
-bool winhibit;// = false;
uint64 wdata;
uint8 dcomp, zcomp;
DATA(wdata, dcomp, zcomp, winhibit,
true, cmpdst, daddasel, daddbsel, daddmode, daddq_sel, data_sel, 0/*dbinh*/,
dend, dstart, dstd, iinc, lfufunc, patd, patdadd,
phrase_mode, srcd, false/*srcdread*/, false/*srczread*/, srcz2add, zmode,
- bcompen, bkgwren, dcompen, icount & 0x07, pixsize);
+ bcompen, bkgwren, dcompen, icount & 0x07, pixsize,
+ srcz, dstz, zinc);
/*
Seems that the phrase mode writes with DCOMPEN and DSTEN are corrupting inside of DATA: !!! FIX !!!
It's fairly random as well. 7CFE -> 7DFE, 7FCA -> 78CA, 7FA4 -> 78A4, 7F88 -> 8F88
*/
//NOTE: There seems to be an off-by-one bug here in the clip_a1 section... !!! FIX !!!
// Actually, seems to be related to phrase mode writes...
+// Or is it? Could be related to non-15-bit compares as above?
if (clip_a1 && ((a1_x & 0x8000) || (a1_y & 0x8000) || (a1_x >= a1_win_x) || (a1_y >= a1_win_y)))
winhibit = true;
else
JaguarWriteByte(address, wdata & 0x000000FF, BLITTER);
}
+}
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
printf(" [%08X%08X]", (uint32)(wdata >> 32), (uint32)(wdata & 0xFFFFFFFF));
+ printf(" (icount=%04X, inc=%u)\n", icount, (uint16)inc);
+ printf(" [dstart=%X dend=%X pwidth=%X srcshift=%X]", dstart, dend, pwidth, srcshift);
+ printf("[daas=%X dabs=%X dam=%X ds=%X daq=%s]\n", daddasel, daddbsel, daddmode, data_sel, (daddq_sel ? "T" : "F"));
fflush(stdout);
}
#endif
-}
+ }
+ if (dzwrite)
+ {
+// OK, here's the big insight: When NOT in GOURZ mode, srcz1 & 2 function EXACTLY the same way that
+// srcd1 & 2 work--there's an implicit shift from srcz1 to srcz2 whenever srcz1 is read.
+// OTHERWISE, srcz1 is the integer for the computed Z and srcz2 is the fractional part.
+// Writes to srcz1 & 2 follow the same pattern as the other 64-bit registers--low 32 at the low address,
+// high 32 at the high address (little endian!).
+// NOTE: GOURZ is still not properly supported. Check patd/patf handling...
+// Phrase mode start/end masks are not properly supported either...
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" (icount=%04X, inc=%u)\n", icount, (uint16)inc);
-fflush(stdout);
+ printf(" Entering DZWRITE state...");
+ printf(" Dest Z write address/pix address: %08X/%1X [%08X%08X]\n", address, pixAddr,
+ (uint32)(srcz >> 32), (uint32)(srcz & 0xFFFFFFFF));
+ fflush(stdout);
}
#endif
- }
-
- if (dzwrite)
- {
+//This is not correct... !!! FIX !!!
+//Should be OK now... We'll see...
+//Nope. Having the same starstep write problems in phrase mode as we had with pixels... !!! FIX !!!
+//This is not causing the problem in Hover Strike... :-/
+//The problem was with the SREADX not shifting. Still problems with Z comparisons & other text in pregame screen...
+if (!winhibit)
+{
+ if (phrase_mode)
+ {
+ JaguarWriteLong(address + 0, srcz >> 32, BLITTER);
+ JaguarWriteLong(address + 4, srcz & 0xFFFFFFFF, BLITTER);
+ }
+ else
+ {
+ if (pixsize == 4)
+ JaguarWriteWord(address, srcz & 0x0000FFFF, BLITTER);
+ }
+}//*/
#ifdef VERBOSE_BLITTER_LOGGING
if (logBlit)
{
-printf(" Entering DZWRITE state...\n");
-fflush(stdout);
+// printf(" [%08X%08X]\n", (uint32)(srcz >> 32), (uint32)(srcz & 0xFFFFFFFF));
+// fflush(stdout);
+//printf(" [dstart=%X dend=%X pwidth=%X srcshift=%X]", dstart, dend, pwidth, srcshift);
+ printf(" [dstart=? dend=? pwidth=? srcshift=%X]", srcshift);
+ printf("[daas=%X dabs=%X dam=%X ds=%X daq=%s]\n", daddasel, daddbsel, daddmode, data_sel, (daddq_sel ? "T" : "F"));
+ fflush(stdout);
}
#endif
}
bool big_pix, bool cmpdst, uint8 daddasel, uint8 daddbsel, uint8 daddmode, bool daddq_sel, uint8 data_sel,
uint8 dbinh, uint8 dend, uint8 dstart, uint64 dstd, uint32 iinc, uint8 lfu_func, uint64 &patd, bool patdadd,
bool phrase_mode, uint64 srcd, bool srcdread, bool srczread, bool srcz2add, uint8 zmode,
- bool bcompen, bool bkgwren, bool dcompen, uint8 icount, uint8 pixsize)
+ bool bcompen, bool bkgwren, bool dcompen, uint8 icount, uint8 pixsize,
+ uint64 &srcz, uint64 dstz, uint32 zinc)
{
/*
Stuff we absolutely *need* to have passed in/out:
IN:
patdadd, dstd, srcd, patd, daddasel, daddbsel, daddmode, iinc, srcz1, srcz2, big_pix, phrase_mode, cmpdst
OUT:
- changed patd (wdata I guess...)
+ changed patd (wdata I guess...) (Nope. We pass it back directly now...)
*/
// Source data registers
dcomp |= 0x40;
if ((cmpd & 0xFF00000000000000LL) == 0)
dcomp |= 0x80;
+//////////////////////////////////////////////////////////////////////////////////////
+
+// Zed comparator for Z-buffer operations
+
+/*Zedcomp := ZEDCOMP (zcomp[0..3], srczp[0..1], dstz[0..1], zmode[0..2]);*/
+////////////////////////////////////// C++ CODE //////////////////////////////////////
+//srczp is srcz pipelined, also it goes through a source shift as well...
+/*The shift is basically like so (each piece is 16 bits long):
+
+ 0 1 2 3 4 5 6
+ srcz1lolo srcz1lohi srcz1hilo srcz1hihi srcrz2lolo srcz2lohi srcz2hilo
+
+with srcshift bits 4 & 5 selecting the start position
+*/
+//So... basically what we have here is:
+ zcomp = 0;
+
+ if ((((srcz & 0x000000000000FFFFLL) < (dstz & 0x000000000000FFFFLL)) && (zmode & 0x01))
+ || (((srcz & 0x000000000000FFFFLL) == (dstz & 0x000000000000FFFFLL)) && (zmode & 0x02))
+ || (((srcz & 0x000000000000FFFFLL) > (dstz & 0x000000000000FFFFLL)) && (zmode & 0x04)))
+ zcomp |= 0x01;
+
+ if ((((srcz & 0x00000000FFFF0000LL) < (dstz & 0x00000000FFFF0000LL)) && (zmode & 0x01))
+ || (((srcz & 0x00000000FFFF0000LL) == (dstz & 0x00000000FFFF0000LL)) && (zmode & 0x02))
+ || (((srcz & 0x00000000FFFF0000LL) > (dstz & 0x00000000FFFF0000LL)) && (zmode & 0x04)))
+ zcomp |= 0x02;
+
+ if ((((srcz & 0x0000FFFF00000000LL) < (dstz & 0x0000FFFF00000000LL)) && (zmode & 0x01))
+ || (((srcz & 0x0000FFFF00000000LL) == (dstz & 0x0000FFFF00000000LL)) && (zmode & 0x02))
+ || (((srcz & 0x0000FFFF00000000LL) > (dstz & 0x0000FFFF00000000LL)) && (zmode & 0x04)))
+ zcomp |= 0x04;
+
+ if ((((srcz & 0xFFFF000000000000LL) < (dstz & 0xFFFF000000000000LL)) && (zmode & 0x01))
+ || (((srcz & 0xFFFF000000000000LL) == (dstz & 0xFFFF000000000000LL)) && (zmode & 0x02))
+ || (((srcz & 0xFFFF000000000000LL) > (dstz & 0xFFFF000000000000LL)) && (zmode & 0x04)))
+ zcomp |= 0x08;
+
+//TEMP, TO TEST IF ZCOMP IS THE CULPRIT...
+//Nope, this is NOT the problem...
+//zcomp=0;
// We'll do the comparison/bit/byte inhibits here, since that's they way it happens
// in the real thing (dcomp goes out to COMP_CTRL and back into DATA through dbinh)...
#if 1
uint8 dbinht;
// bool nowrite;
COMP_CTRL(dbinht, nowrite,
- bcompen, true/*big_pix*/, bkgwren, dcomp, dcompen, icount, pixsize, phrase_mode, srcd & 0xFF, 0);//zcomp);
+ bcompen, true/*big_pix*/, bkgwren, dcomp, dcompen, icount, pixsize, phrase_mode, srcd & 0xFF, zcomp);
dbinh = dbinht;
// dbinh = 0x00;
#endif
-//////////////////////////////////////////////////////////////////////////////////////
-
-// Zed comparator for Z-buffer operations
-
-/*Zedcomp := ZEDCOMP (zcomp[0..3], srczp[0..1], dstz[0..1], zmode[0..2]);*/
-////////////////////////////////////// C++ CODE //////////////////////////////////////
+#if 1
+#ifdef VERBOSE_BLITTER_LOGGING
+if (logBlit)
+{
+ printf("\n[dcomp=%02X zcomp=%02X dbinh=%02X]\n", dcomp, zcomp, dbinh);
+ fflush(stdout);
+}//*/
+#endif
+#endif
//////////////////////////////////////////////////////////////////////////////////////
// 22 Mar 94
//This is normally done asynchronously above (thru local_data) when in patdadd mode...
//And now it's passed back to the caller to be persistent between calls...!
-//But it's causing some serious fuck-ups in T2K now... !!! FIX !!!
+//But it's causing some serious fuck-ups in T2K now... !!! FIX !!! [DONE--???]
//Weird! It doesn't anymore...!
if (patdadd)
patd = ((uint64)addq[3] << 48) | ((uint64)addq[2] << 32) | ((uint64)addq[1] << 16) | (uint64)addq[0];
(uint32)(wdata >> 32), (uint32)(wdata & 0xFFFFFFFF), mask);
fflush(stdout);
}//*/
+//This is a crappy way of handling this, but it should work for now...
+ uint64 zwdata;
+ zwdata = ((srcz & mask) | (dstz & ~mask)) & 0x00000000000000FFLL;
+ zwdata |= (mask & 0x0100 ? srcz : dstz) & 0x000000000000FF00LL;
+ zwdata |= (mask & 0x0200 ? srcz : dstz) & 0x0000000000FF0000LL;
+ zwdata |= (mask & 0x0400 ? srcz : dstz) & 0x00000000FF000000LL;
+ zwdata |= (mask & 0x0800 ? srcz : dstz) & 0x000000FF00000000LL;
+ zwdata |= (mask & 0x1000 ? srcz : dstz) & 0x0000FF0000000000LL;
+ zwdata |= (mask & 0x2000 ? srcz : dstz) & 0x00FF000000000000LL;
+ zwdata |= (mask & 0x4000 ? srcz : dstz) & 0xFF00000000000000LL;
+if (logBlit)
+{
+ printf("\n[srcz=%08X%08X dstz=%08X%08X zwdata=%08X%08X mask=%04X]\n",
+ (uint32)(srcz >> 32), (uint32)(srcz & 0xFFFFFFFF),
+ (uint32)(dstz >> 32), (uint32)(dstz & 0xFFFFFFFF),
+ (uint32)(zwdata >> 32), (uint32)(zwdata & 0xFFFFFFFF), mask);
+ fflush(stdout);
+}//*/
+ srcz = zwdata;
//////////////////////////////////////////////////////////////////////////////////////
/*Data_enab[0-1] := BUF8 (data_enab[0-1], data_ena);
projects / virtualjaguar / blobdiff