#include "applicationwindow.h"
#include "about.h"
+#include "blockwidget.h"
#include "drawingview.h"
+#include "fileio.h"
#include "generaltab.h"
+#include "layerwidget.h"
#include "painter.h"
#include "settingsdialog.h"
CreateMenus();
CreateToolbars();
+ // Create Dock widgets
+ QDockWidget * dock1 = new QDockWidget(tr("Layers"), this);
+ LayerWidget * lw = new LayerWidget;
+ dock1->setWidget(lw);
+ addDockWidget(Qt::RightDockWidgetArea, dock1);
+ QDockWidget * dock2 = new QDockWidget(tr("Blocks"), this);
+ BlockWidget * bw = new BlockWidget;
+ dock2->setWidget(bw);
+ addDockWidget(Qt::RightDockWidgetArea, dock2);
+ // Needed for saveState()
+ dock1->setObjectName("Layers");
+ dock2->setObjectName("Blocks");
+
// Create status bar
+ zoomIndicator = new QLabel("Grid: 12.0\" Zoom: 12.5%");
+ statusBar()->addPermanentWidget(zoomIndicator);
statusBar()->showMessage(tr("Ready"));
ReadSettings();
-
-// connect(textEdit->document(), SIGNAL(contentsChanged()),
-// this, SLOT(documentWasModified()));
-
-// setCurrentFile("");
setUnifiedTitleAndToolBarOnMac(true);
-
-// ((TTEdit *)qApp)->charWnd->show();//eh?
Object::SetFont(new QFont("Verdana", 15, QFont::Bold));
}
+
void ApplicationWindow::closeEvent(QCloseEvent * event)
{
WriteSettings();
//Do we have a memory leak here if we don't delete the font in the Object???
}
-//void ApplicationWindow::FileOpen(void)
-//{
-//}
+
+void ApplicationWindow::FileNew(void)
+{
+ // Should warn the user if drawing hasn't been saved...
+ drawing->document.Clear();
+ drawing->update();
+ documentName.clear();
+ setWindowTitle("Architektonas - Untitled");
+ statusBar()->showMessage(tr("New drawing is ready."));
+}
+
+
+void ApplicationWindow::FileOpen(void)
+{
+ QString filename = QFileDialog::getOpenFileName(this, tr("Open Drawing"),
+ "", tr("Architektonas files (*.drawing)"));
+ FILE * file = fopen(filename.toAscii().data(), "r");
+
+ if (file == 0)
+ {
+ QMessageBox msg;
+ msg.setText(QString(tr("Could not open file \"%1\" for loading!")).arg(filename));
+ msg.setIcon(QMessageBox::Critical);
+ msg.exec();
+ return;
+ }
+
+ Container container(Vector(0, 0));
+ bool successful = FileIO::LoadAtnsFile(file, &container);
+ fclose(file);
+
+ if (!successful)
+ {
+ QMessageBox msg;
+ msg.setText(QString(tr("Could not load file \"%1\"!")).arg(filename));
+ msg.setIcon(QMessageBox::Critical);
+ msg.exec();
+ return;
+ }
+
+printf("FileOpen: container size = %li\n", container.objects.size());
+ drawing->document = container;
+ drawing->update();
+ documentName = filename;
+ setWindowTitle(QString("Architektonas - %1").arg(documentName));
+ statusBar()->showMessage(tr("Drawing loaded."));
+}
+
+
+void ApplicationWindow::FileSave(void)
+{
+ if (documentName.isEmpty())
+ documentName = QFileDialog::getSaveFileName(this, tr("Save Drawing"),
+ "", tr("Architektonas drawings (*.drawing)"));
+
+ FILE * file = fopen(documentName.toAscii().data(), "w");
+
+ if (file == 0)
+ {
+ QMessageBox msg;
+ msg.setText(QString(tr("Could not open file \"%1\" for saving!")).arg(documentName));
+ msg.setIcon(QMessageBox::Critical);
+ msg.exec();
+ return;
+ }
+
+ bool successful = FileIO::SaveAtnsFile(file, &drawing->document);
+ fclose(file);
+
+ if (!successful)
+ {
+ QMessageBox msg;
+ msg.setText(QString(tr("Could not save file \"%1\"!")).arg(documentName));
+ msg.setIcon(QMessageBox::Critical);
+ msg.exec();
+ // In this case, we should unlink the created file, since it's not right...
+ unlink(documentName.toAscii().data());
+ return;
+ }
+
+ setWindowTitle(QString("Architektonas - %1").arg(documentName));
+ statusBar()->showMessage(tr("Drawing saved."));
+}
+
+
+void ApplicationWindow::FileSaveAs(void)
+{
+ QString filename = QFileDialog::getSaveFileName(this, tr("Save Drawing As"),
+ documentName, tr("Architektonas drawings (*.drawing)"));
+
+ if (!filename.isEmpty())
+ {
+ documentName = filename;
+ FileSave();
+ }
+}
+
+
+void ApplicationWindow::SnapToGridTool(void)
+{
+ Object::SetSnapMode(snapToGridAct->isChecked());
+}
+
void ApplicationWindow::FixAngle(void)
{
Object::SetFixedAngle(fixAngleAct->isChecked());
}
+
void ApplicationWindow::FixLength(void)
{
Object::SetFixedLength(fixLengthAct->isChecked());
}
+
+// We want certain tools to be exclusive, and this approach isn't working correctly...
void ApplicationWindow::DeleteTool(void)
{
- Object::SetDeleteActive(deleteAct->isChecked());
+ // For this tool, we check first to see if anything is selected. If so, we
+ // delete those and *don't* select the delete tool.
+ if (drawing->document.ItemsSelected() > 0)
+ {
+ drawing->document.DeleteSelectedItems();
+ drawing->update();
+ deleteAct->setChecked(false);
+ return;
+ }
+
+ // Otherwise, toggle the state of the tool
+ ClearUIToolStatesExcept(deleteAct);
+ SetInternalToolStates();
}
+
void ApplicationWindow::DimensionTool(void)
{
- Object::SetDimensionActive(addDimensionAct->isChecked());
+ ClearUIToolStatesExcept(addDimensionAct);
+ SetInternalToolStates();
}
+
void ApplicationWindow::RotateTool(void)
{
- drawing->SetRotateToolActive(rotateAct->isChecked());
+ ClearUIToolStatesExcept(rotateAct);
+ SetInternalToolStates();
}
+
void ApplicationWindow::AddLineTool(void)
{
- addCircleAct->setChecked(false);
- addArcAct->setChecked(false);
- rotateAct->setChecked(false);
- RotateTool();
- drawing->SetAddLineToolActive(addLineAct->isChecked());
+ ClearUIToolStatesExcept(addLineAct);
+ SetInternalToolStates();
}
+
void ApplicationWindow::AddCircleTool(void)
{
- addLineAct->setChecked(false);
- addArcAct->setChecked(false);
- rotateAct->setChecked(false);
- RotateTool();
- drawing->SetAddCircleToolActive(addCircleAct->isChecked());
+ ClearUIToolStatesExcept(addCircleAct);
+ SetInternalToolStates();
+}
+
+
+void ApplicationWindow::AddArcTool(void)
+{
+ ClearUIToolStatesExcept(addArcAct);
+ SetInternalToolStates();
}
+
+void ApplicationWindow::AddPolygonTool(void)
+{
+ ClearUIToolStatesExcept(addPolygonAct);
+ SetInternalToolStates();
+}
+
+
void ApplicationWindow::ZoomInTool(void)
{
double zoomFactor = 2.0;
//printf("Zoom in... level going from %02f to ", Painter::zoom);
// This just zooms leaving origin intact... should zoom in at the current center! [DONE]
Painter::zoom *= zoomFactor;
+ drawing->gridSpacing = 12.0 / Painter::zoom;
+ zoomIndicator->setText(QString("Grid: %2\" Zoom: %1%").arg(Painter::zoom * 100.0 * SCREEN_ZOOM).arg(drawing->gridSpacing));
+ drawing->UpdateGridBackground();
drawing->update();
}
+
void ApplicationWindow::ZoomOutTool(void)
{
/*
//printf("Zoom out...\n");
// This just zooms leaving origin intact... should zoom out at the current center! [DONE]
Painter::zoom /= zoomFactor;
+ drawing->gridSpacing = 12.0 / Painter::zoom;
+ zoomIndicator->setText(QString("Grid: %2\" Zoom: %1%").arg(Painter::zoom * 100.0 * SCREEN_ZOOM).arg(drawing->gridSpacing));
+ drawing->UpdateGridBackground();
drawing->update();
}
+
+void ApplicationWindow::ClearUIToolStatesExcept(QAction * exception)
+{
+ if (exception != addArcAct)
+ addArcAct->setChecked(false);
+
+ if (exception != addCircleAct)
+ addCircleAct->setChecked(false);
+
+ if (exception != addDimensionAct)
+ addDimensionAct->setChecked(false);
+
+ if (exception != addLineAct)
+ addLineAct->setChecked(false);
+
+ if (exception != addPolygonAct)
+ addPolygonAct->setChecked(false);
+
+ if (exception != deleteAct)
+ deleteAct->setChecked(false);
+
+ if (exception != rotateAct)
+ rotateAct->setChecked(false);
+}
+
+
+void ApplicationWindow::SetInternalToolStates(void)
+{
+ Object::SetDeleteActive(deleteAct->isChecked());
+ Object::SetDimensionActive(addDimensionAct->isChecked());
+ drawing->SetRotateToolActive(rotateAct->isChecked());
+
+ // We can be sure that if we've come here, then either an active tool is
+ // being deactivated, or a new tool is being created. In either case, the
+ // old tool needs to be deleted.
+ if (drawing->toolAction)
+ {
+ delete drawing->toolAction;
+ drawing->toolAction = NULL;
+ }
+
+ drawing->SetAddLineToolActive(addLineAct->isChecked());
+ drawing->SetAddCircleToolActive(addCircleAct->isChecked());
+ drawing->SetAddDimensionToolActive(addDimensionAct->isChecked());
+}
+
+
void ApplicationWindow::HelpAbout(void)
{
aboutWin->show();
}
+
void ApplicationWindow::Settings(void)
{
SettingsDialog dlg(this);
WriteSettings();
}
+
+//
+// Group a bunch of selected objects (which can include other groups) together
+// or ungroup a selected group.
+//
+void ApplicationWindow::HandleGrouping(void)
+{
+ int itemsSelected = drawing->document.ItemsSelected();
+
+ // If nothing selected, do nothing
+ if (itemsSelected == 0)
+ {
+ statusBar()->showMessage(tr("No objects selected to make a group from."));
+ return;
+ }
+
+ // If it's a group that's selected, ungroup it and leave the objects in a
+ // selected state
+ if (itemsSelected == 1)
+ {
+ Object * object = drawing->document.SelectedItem(0);
+
+#if 0
+if (object == NULL)
+ printf("SelectedItem = NULL!\n");
+else
+ printf("SelectedItem = %08X, type = %i\n", object, object->type);
+#endif
+
+ if (object == NULL || object->type != OTContainer)
+ {
+ statusBar()->showMessage(tr("A group requires two or more selected objects."));
+ return;
+ }
+
+ // Need the parent of the group, we're assuming here that the parent is
+ // the drawing's document. Does it matter? Maybe...
+ // Could just stipulate that grouping like this only takes place where the
+ // parent of the group is the drawing's document. Makes life much simpler.
+ ((Container *)object)->SelectAll();
+ ((Container *)object)->MoveContentsTo(&(drawing->document));
+ drawing->document.Delete(object);
+ statusBar()->showMessage(tr("Objects ungrouped."));
+ }
+ // Otherwise, if it's a group of 2 or more objects (which can be groups too)
+ // group them and select the group
+ else if (itemsSelected > 1)
+ {
+ Container * container = new Container(Vector(), &(drawing->document));
+ drawing->document.MoveSelectedContentsTo(container);
+ drawing->document.Add(container);
+ container->DeselectAll();
+ container->state = OSSelected;
+ statusBar()->showMessage(QString(tr("Grouped %1 objects.")).arg(itemsSelected));
+ }
+
+ drawing->update();
+}
+
+
void ApplicationWindow::CreateActions(void)
{
exitAct = CreateAction(tr("&Quit"), tr("Quit"), tr("Exits the application."),
QIcon(":/res/quit.png"), QKeySequence(tr("Ctrl+q")));
connect(exitAct, SIGNAL(triggered()), this, SLOT(close()));
+ snapToGridAct = CreateAction(tr("Snap To &Grid"), tr("Snap To Grid"), tr("Snaps mouse cursor to the visible grid when moving/creating objects."), QIcon(":/res/snap-to-grid-tool.png"), QKeySequence(tr("S")), true);
+ connect(snapToGridAct, SIGNAL(triggered()), this, SLOT(SnapToGridTool()));
+
fixAngleAct = CreateAction(tr("Fix &Angle"), tr("Fix Angle"), tr("Fixes the angle of an object."),
QIcon(":/res/fix-angle.png"), QKeySequence(tr("F,A")), true);
connect(fixAngleAct, SIGNAL(triggered()), this, SLOT(FixAngle()));
QIcon(":/res/fix-length.png"), QKeySequence(tr("F,L")), true);
connect(fixLengthAct, SIGNAL(triggered()), this, SLOT(FixLength()));
- deleteAct = CreateAction(tr("&Delete"), tr("Delete Object"), tr("Deletes selected objects."), QIcon(":/res/delete-tool.png"), QKeySequence(), true);
+ deleteAct = CreateAction(tr("&Delete"), tr("Delete Object"), tr("Deletes selected objects."), QIcon(":/res/delete-tool.png"), QKeySequence(tr("Delete")), true);
connect(deleteAct, SIGNAL(triggered()), this, SLOT(DeleteTool()));
addDimensionAct = CreateAction(tr("Add &Dimension"), tr("Add Dimension"), tr("Adds a dimension to the drawing."), QIcon(":/res/dimension-tool.png"), QKeySequence("D,I"), true);
connect(addCircleAct, SIGNAL(triggered()), this, SLOT(AddCircleTool()));
addArcAct = CreateAction(tr("Add &Arc"), tr("Add Arc"), tr("Adds arcs to the drawing."), QIcon(":/res/add-arc-tool.png"), QKeySequence("A,A"), true);
+ connect(addArcAct, SIGNAL(triggered()), this, SLOT(AddArcTool()));
addPolygonAct = CreateAction(tr("Add &Polygon"), tr("Add Polygon"), tr("Add polygons to the drawing."), QIcon(":/res/add-polygon-tool.png"), QKeySequence("A,P"), true);
+ connect(addPolygonAct, SIGNAL(triggered()), this, SLOT(AddPolygonTool()));
aboutAct = CreateAction(tr("About &Architektonas"), tr("About Architektonas"), tr("Gives information about this program."), QIcon(":/res/generic-tool.png"), QKeySequence());
connect(aboutAct, SIGNAL(triggered()), this, SLOT(HelpAbout()));
connect(zoomOutAct, SIGNAL(triggered()), this, SLOT(ZoomOutTool()));
fileNewAct = CreateAction(tr("&New Drawing"), tr("New Drawing"), tr("Creates a new drawing."), QIcon(":/res/generic-tool.png"), QKeySequence(tr("Ctrl+n")));
+ connect(fileNewAct, SIGNAL(triggered()), this, SLOT(FileNew()));
fileOpenAct = CreateAction(tr("&Open Drawing"), tr("Open Drawing"), tr("Opens an existing drawing from a file."), QIcon(":/res/generic-tool.png"), QKeySequence(tr("Ctrl+o")));
+ connect(fileOpenAct, SIGNAL(triggered()), this, SLOT(FileOpen()));
fileSaveAct = CreateAction(tr("&Save Drawing"), tr("Save Drawing"), tr("Saves the current drawing to a file."), QIcon(":/res/generic-tool.png"), QKeySequence(tr("Ctrl+s")));
+ connect(fileSaveAct, SIGNAL(triggered()), this, SLOT(FileSave()));
fileSaveAsAct = CreateAction(tr("Save Drawing &As"), tr("Save As"), tr("Saves the current drawing to a file with a different name."), QIcon(":/res/generic-tool.png"), QKeySequence(tr("Ctrl+Shift+s")));
+ connect(fileSaveAsAct, SIGNAL(triggered()), this, SLOT(FileSaveAs()));
fileCloseAct = CreateAction(tr("&Close Drawing"), tr("Close Drawing"), tr("Closes the current drawing."), QIcon(":/res/generic-tool.png"), QKeySequence(tr("Ctrl+w")));
settingsAct = CreateAction(tr("&Settings"), tr("Settings"), tr("Change certain defaults for Architektonas."), QIcon(":/res/generic-tool.png"), QKeySequence());
connect(settingsAct, SIGNAL(triggered()), this, SLOT(Settings()));
+ groupAct = CreateAction(tr("&Group"), tr("Group"), tr("Group/ungroup selected objects."), QIcon(":/res/group-tool.png"), QKeySequence("g"));
+ connect(groupAct, SIGNAL(triggered()), this, SLOT(HandleGrouping()));
+
//Hm. I think we'll have to have separate logic to do the "Radio Group Toolbar" thing...
+// Yup, in order to turn them off, we'd have to have an "OFF" toolbar button. Ick.
/* QActionGroup * group = new QActionGroup(this);
group->addAction(deleteAct);
group->addAction(addDimensionAct);
group->addAction(addArcAct);//*/
}
+
//
// Consolidates action creation from a multi-step process to a single-step one.
//
return action;
}
+
//
// This is essentially the same as the previous function, but this allows more
// than one key sequence to be added as key shortcuts.
return action;
}
+
void ApplicationWindow::CreateMenus(void)
{
QMenu * menu = menuBar()->addMenu(tr("&File"));
menu->addAction(zoomOutAct);
menu = menuBar()->addMenu(tr("&Edit"));
+ menu->addAction(snapToGridAct);
+ menu->addAction(groupAct);
menu->addAction(fixAngleAct);
menu->addAction(fixLengthAct);
menu->addAction(rotateAct);
menu->addAction(aboutAct);
}
+
void ApplicationWindow::CreateToolbars(void)
{
QToolBar * toolbar = addToolBar(tr("File"));
+ toolbar->setObjectName("File"); // Needed for saveState()
toolbar->addAction(exitAct);
toolbar = addToolBar(tr("View"));
+ toolbar->setObjectName("View");
toolbar->addAction(zoomInAct);
toolbar->addAction(zoomOutAct);
toolbar = addToolBar(tr("Edit"));
+ toolbar->setObjectName("Edit");
+ toolbar->addAction(snapToGridAct);
+ toolbar->addAction(groupAct);
toolbar->addAction(fixAngleAct);
toolbar->addAction(fixLengthAct);
toolbar->addAction(rotateAct);
toolbar->addAction(deleteAct);
+ toolbar->addSeparator();
toolbar->addAction(addLineAct);
toolbar->addAction(addCircleAct);
toolbar->addAction(addArcAct);
+ toolbar->addAction(addPolygonAct);
toolbar->addAction(addDimensionAct);
}
+
void ApplicationWindow::ReadSettings(void)
{
QPoint pos = settings.value("pos", QPoint(200, 200)).toPoint();
QSize size = settings.value("size", QSize(400, 400)).toSize();
drawing->useAntialiasing = settings.value("useAntialiasing", true).toBool();
+ snapToGridAct->setChecked(settings.value("snapToGrid", true).toBool());
resize(size);
move(pos);
+ restoreState(settings.value("windowState").toByteArray());
// pos = settings.value("charWndPos", QPoint(0, 0)).toPoint();
// size = settings.value("charWndSize", QSize(200, 200)).toSize();
// ((TTEdit *)qApp)->charWnd->resize(size);
// ((TTEdit *)qApp)->charWnd->move(pos);
}
+
void ApplicationWindow::WriteSettings(void)
{
settings.setValue("pos", pos());
settings.setValue("size", size());
+ settings.setValue("windowState", saveState());
settings.setValue("useAntialiasing", drawing->useAntialiasing);
+ settings.setValue("snapToGrid", snapToGridAct->isChecked());
// settings.setValue("charWndPos", ((TTEdit *)qApp)->charWnd->pos());
// settings.setValue("charWndSize", ((TTEdit *)qApp)->charWnd->size());
}
+
projects / architektonas / blobdiff