// JLH = James Hammons <jlhamm@acm.org>
//
// Who When What
-// --- ---------- -------------------------------------------------------------
+// --- ---------- ------------------------------------------------------------
// JLH 03/22/2011 Created this file
// JLH 09/29/2011 Added simple zoom in/out functionality
// JLH 10/03/2011 Fixed zoom tool to zoom in/out from center of screen
#include "about.h"
#include "blockwidget.h"
-#include "dimension.h"
#include "drawingview.h"
-#include "drawarcaction.h"
-#include "drawcircleaction.h"
-#include "drawdimensionaction.h"
-#include "drawlineaction.h"
#include "fileio.h"
#include "generaltab.h"
-#include "geometry.h"
+#include "global.h"
#include "layerwidget.h"
-#include "line.h"
-#include "mirroraction.h"
+#include "objectwidget.h"
#include "painter.h"
-#include "rotateaction.h"
+#include "penwidget.h"
#include "settingsdialog.h"
+#include "structs.h"
+#include "utils.h"
// Class variables
BlockWidget * bw = new BlockWidget;
dock2->setWidget(bw);
addDockWidget(Qt::RightDockWidgetArea, dock2);
+ QDockWidget * dock3 = new QDockWidget(tr("Object"), this);
+ ObjectWidget * ow = new ObjectWidget;
+ dock3->setWidget(ow);
+ addDockWidget(Qt::RightDockWidgetArea, dock3);
// Needed for saveState()
dock1->setObjectName("Layers");
dock2->setObjectName("Blocks");
+ dock3->setObjectName("Object");
- // Create status bar
+ // Create status bar
zoomIndicator = new QLabel("Grid: 12.0\" BU: Inch");
statusBar()->addPermanentWidget(zoomIndicator);
statusBar()->showMessage(tr("Ready"));
ReadSettings();
setUnifiedTitleAndToolBarOnMac(true);
- Object::SetFont(new QFont("Verdana", 15, QFont::Bold));
+ Global::font = new QFont("Verdana", 15, QFont::Bold);
- connect(lw, SIGNAL(LayerSelected(int)), drawing, SLOT(SetCurrentLayer(int)));
+ connect(lw, SIGNAL(LayerDeleted(int)), drawing, SLOT(DeleteCurrentLayer(int)));
+ connect(lw, SIGNAL(LayerToggled()), drawing, SLOT(HandleLayerToggle()));
+ connect(lw, SIGNAL(LayersSwapped(int, int)), drawing, SLOT(HandleLayerSwap(int, int)));
+ connect(this, SIGNAL(ReloadLayers()), lw, SLOT(Reload()));
+
+ connect(drawing, SIGNAL(ObjectHovered(Object *)), ow, SLOT(ShowInfo(Object *)));
}
void ApplicationWindow::closeEvent(QCloseEvent * event)
{
WriteSettings();
- event->accept(); // Use ignore() if can't close for some reason
+ event->accept(); // Use ignore() if can't close for some reason
//Do we have a memory leak here if we don't delete the font in the Object???
}
void ApplicationWindow::FileNew(void)
{
- // Should warn the user if drawing hasn't been saved...
- drawing->document.Clear();
+ // Warn the user if drawing has changed and hasn't been saved...
+ if (drawing->dirty)
+ {
+ QMessageBox msg;
+
+ msg.setText("The document has been modified.");
+ msg.setInformativeText("Do you want to save your changes?");
+ msg.setStandardButtons(QMessageBox::Save | QMessageBox::Discard | QMessageBox::Cancel);
+ msg.setDefaultButton(QMessageBox::Save);
+ int response = msg.exec();
+
+ switch (response)
+ {
+ case QMessageBox::Save:
+ // Save was clicked
+ FileSave();
+ break;
+ case QMessageBox::Discard:
+ // Don't Save was clicked
+ break;
+ case QMessageBox::Cancel:
+ // Cancel was clicked
+ return;
+// break;
+ }
+ }
+
+ FileIO::ResetLayerVectors();
+ emit ReloadLayers();
+ DeleteContents(drawing->document.objects);
+ drawing->document.objects.clear();
+ drawing->dirty = false;
drawing->update();
documentName.clear();
setWindowTitle("Architektonas - Untitled");
if (filename.isEmpty())
return;
- FILE * file = fopen(filename.toAscii().data(), "r");
+ FILE * file = fopen(filename.toUtf8().data(), "r");
if (file == 0)
{
return;
}
- Container container(Vector(0, 0));
+ Container container(true); // Make sure it's a top level container...
bool successful = FileIO::LoadAtnsFile(file, &container);
fclose(file);
msg.setText(QString(tr("Could not load file \"%1\"!")).arg(filename));
msg.setIcon(QMessageBox::Critical);
msg.exec();
+ // Make sure to delete any hanging objects in the container...
+ DeleteContents(container.objects);
return;
}
-printf("FileOpen: container size = %li\n", container.objects.size());
+//printf("FileOpen: container size = %li\n", container.objects.size());
+ // Keep memory leaks from happening by getting rid of the old document
+ DeleteContents(drawing->document.objects);
+ emit ReloadLayers();
+ // We can do this because the vector is just a bunch of pointers to our
+ // Objects, and the Containers (non-empty) can be moved this way with no
+ // problem.
drawing->document = container;
+ drawing->dirty = false;
drawing->update();
documentName = filename;
setWindowTitle(QString("Architektonas - %1").arg(documentName));
documentName = QFileDialog::getSaveFileName(this, tr("Save Drawing"),
"", tr("Architektonas drawings (*.drawing)"));
- FILE * file = fopen(documentName.toAscii().data(), "w");
+ FILE * file = fopen(documentName.toUtf8().data(), "w");
if (file == 0)
{
msg.setText(QString(tr("Could not save file \"%1\"!")).arg(documentName));
msg.setIcon(QMessageBox::Critical);
msg.exec();
- // In this case, we should unlink the created file, since it's not right...
-// unlink(documentName.toAscii().data());
+ // In this case, we should unlink the created file, since it's not
+ // right...
+// unlink(documentName.toUtf8().data());
QFile::remove(documentName);
return;
}
+ drawing->dirty = false;
setWindowTitle(QString("Architektonas - %1").arg(documentName));
statusBar()->showMessage(tr("Drawing saved."));
}
}
+void ApplicationWindow::contextMenuEvent(QContextMenuEvent * event)
+{
+ QMenu menu(this);
+ menu.addAction(mirrorAct);
+ menu.addAction(rotateAct);
+ menu.addAction(trimAct);
+ menu.exec(event->globalPos());
+}
+
+
void ApplicationWindow::SnapToGridTool(void)
{
- Object::SetSnapMode(snapToGridAct->isChecked());
+ Global::snapToGrid = snapToGridAct->isChecked();
}
void ApplicationWindow::FixAngle(void)
{
- Object::SetFixedAngle(fixAngleAct->isChecked());
+ Global::fixedAngle = fixAngleAct->isChecked();
}
void ApplicationWindow::FixLength(void)
{
- Object::SetFixedLength(fixLengthAct->isChecked());
+ Global::fixedLength = fixLengthAct->isChecked();
}
-// We want certain tools to be exclusive, and this approach isn't working correctly...
void ApplicationWindow::DeleteTool(void)
{
// For this tool, we check first to see if anything is selected. If so, we
// delete those and *don't* select the delete tool.
- if (drawing->document.ItemsSelected() > 0)
+// if (drawing->numSelected > 0)
+ if (drawing->select.size() > 0)
{
- drawing->document.DeleteSelectedItems();
+ DeleteSelectedObjects(drawing->document.objects);
drawing->update();
deleteAct->setChecked(false);
return;
void ApplicationWindow::RotateTool(void)
{
ClearUIToolStatesExcept(rotateAct);
+
+ // Do tear-down if Rotate tool has been turned off
+ if (!rotateAct->isChecked())
+ drawing->RotateHandler(ToolCleanup, Point(0, 0));
+
SetInternalToolStates();
}
void ApplicationWindow::MirrorTool(void)
{
ClearUIToolStatesExcept(mirrorAct);
+
+ // Do tear-down if Rotate tool has been turned off
+ if (!mirrorAct->isChecked())
+ drawing->MirrorHandler(ToolCleanup, Point(0, 0));
+
+ SetInternalToolStates();
+}
+
+
+void ApplicationWindow::TrimTool(void)
+{
+ ClearUIToolStatesExcept(trimAct);
+ SetInternalToolStates();
+}
+
+
+void ApplicationWindow::TriangulateTool(void)
+{
+ ClearUIToolStatesExcept(triangulateAct);
SetInternalToolStates();
}
}
+void ApplicationWindow::AddSplineTool(void)
+{
+ ClearUIToolStatesExcept(addSplineAct);
+ SetInternalToolStates();
+}
+
+
void ApplicationWindow::ZoomInTool(void)
{
double zoomFactor = 2.0;
//printf("Zoom in... Center=%.2f,%.2f; ", center.x, center.y);
center = Painter::QtToCartesianCoords(center);
//printf("(%.2f,%.2f); origin=%.2f,%.2f; ", center.x, center.y, Painter::origin.x, Painter::origin.y);
- Vector newOrigin = center - ((center - Painter::origin) / zoomFactor);
+ Vector newOrigin = center - ((center - Global::origin) / zoomFactor);
//printf("newOrigin=%.2f,%.2f;\n", newOrigin.x, newOrigin.y);
- Painter::origin = newOrigin;
+ Global::origin = newOrigin;
//printf("Zoom in... level going from %02f to ", Painter::zoom);
// This just zooms leaving origin intact... should zoom in at the current
// center! [DONE]
- Painter::zoom *= zoomFactor;
- Object::gridSpacing = drawing->gridPixels / Painter::zoom;
+ Global::zoom *= zoomFactor;
+ Global::gridSpacing = drawing->gridPixels / Global::zoom;
drawing->UpdateGridBackground();
drawing->update();
- zoomIndicator->setText(QString("Grid: %1\", BU: Inch").arg(Object::gridSpacing));
- baseUnitInput->setText(QString("%1").arg(Object::gridSpacing));
+ zoomIndicator->setText(QString("Grid: %1\", BU: Inch").arg(Global::gridSpacing));
+ baseUnitInput->setText(QString("%1").arg(Global::gridSpacing));
}
//printf("(%.2f,%.2f); origin=%.2f,%.2f; ", center.x, center.y, Painter::origin.x, Painter::origin.y);
// Vector newOrigin = (center - Painter::origin) * zoomFactor;
// Vector newOrigin = center - (Painter::origin * zoomFactor);
- Vector newOrigin = center + ((Painter::origin - center) * zoomFactor);
+ Vector newOrigin = center + ((Global::origin - center) * zoomFactor);
//printf("newOrigin=%.2f,%.2f;\n", newOrigin.x, newOrigin.y);
- Painter::origin = newOrigin;
+ Global::origin = newOrigin;
//printf("Zoom out...\n");
// This just zooms leaving origin intact... should zoom out at the current
// center! [DONE]
- Painter::zoom /= zoomFactor;
- Object::gridSpacing = drawing->gridPixels / Painter::zoom;
+ Global::zoom /= zoomFactor;
+ Global::gridSpacing = drawing->gridPixels / Global::zoom;
drawing->UpdateGridBackground();
drawing->update();
- zoomIndicator->setText(QString("Grid: %1\", BU: Inch").arg(Object::gridSpacing));
- baseUnitInput->setText(QString("%1").arg(Object::gridSpacing));
+ zoomIndicator->setText(QString("Grid: %1\", BU: Inch").arg(Global::gridSpacing));
+ baseUnitInput->setText(QString("%1").arg(Global::gridSpacing));
}
void ApplicationWindow::ClearUIToolStatesExcept(QAction * exception)
{
- if (exception != addArcAct)
- addArcAct->setChecked(false);
-
- if (exception != addCircleAct)
- addCircleAct->setChecked(false);
-
- if (exception != addDimensionAct)
- addDimensionAct->setChecked(false);
-
- if (exception != addLineAct)
- addLineAct->setChecked(false);
-
- if (exception != addPolygonAct)
- addPolygonAct->setChecked(false);
-
- if (exception != deleteAct)
- deleteAct->setChecked(false);
+ QAction * actionList[] = {
+ addArcAct, addLineAct, addCircleAct, addDimensionAct, addPolygonAct,
+ addSplineAct, deleteAct, rotateAct, mirrorAct, trimAct, triangulateAct, 0
+ };
- if (exception != rotateAct)
- rotateAct->setChecked(false);
-
- if (exception != mirrorAct)
- mirrorAct->setChecked(false);
+ for(int i=0; actionList[i]!=0; i++)
+ {
+ if (actionList[i] != exception)
+ actionList[i]->setChecked(false);
+ }
}
void ApplicationWindow::SetInternalToolStates(void)
{
- Object::SetDeleteActive(deleteAct->isChecked());
- Object::SetDimensionActive(addDimensionAct->isChecked());
-
// We can be sure that if we've come here, then either an active tool is
// being deactivated, or a new tool is being created. In either case, the
// old tool needs to be deleted.
- if (drawing->toolAction)
- {
- delete drawing->toolAction;
- drawing->toolAction = NULL;
- Object::ignoreClicks = false;
- }
-
- drawing->SetToolActive(addLineAct->isChecked() ? new DrawLineAction() : NULL);
- drawing->SetToolActive(addCircleAct->isChecked() ? new DrawCircleAction() : NULL);
- drawing->SetToolActive(addArcAct->isChecked() ? new DrawArcAction() : NULL);
- drawing->SetToolActive(addDimensionAct->isChecked() ? new DrawDimensionAction() : NULL);
- drawing->SetToolActive(mirrorAct->isChecked() ? new MirrorAction() : NULL);
- drawing->SetToolActive(rotateAct->isChecked() ? new RotateAction() : NULL);
-
- if (drawing->toolAction)
- Object::ignoreClicks = true;
+ Global::toolState = TSNone;
+
+ if (addLineAct->isChecked())
+ Global::tool = TTLine;
+ else if (addCircleAct->isChecked())
+ Global::tool = TTCircle;
+ else if (addArcAct->isChecked())
+ Global::tool = TTArc;
+ else if (addDimensionAct->isChecked())
+ Global::tool = TTDimension;
+ else if (addSplineAct->isChecked())
+ Global::tool = TTSpline;
+ else if (addPolygonAct->isChecked())
+ Global::tool = TTPolygon;
+ else if (deleteAct->isChecked())
+ Global::tool = TTDelete;
+ else if (mirrorAct->isChecked())
+ Global::tool = TTMirror;
+ else if (rotateAct->isChecked())
+ Global::tool = TTRotate;
+ else if (trimAct->isChecked())
+ Global::tool = TTTrim;
+ else if (triangulateAct->isChecked())
+ Global::tool = TTTriangulate;
+ else
+ Global::tool = TTNone;
drawing->update();
}
//
void ApplicationWindow::HandleGrouping(void)
{
+#if 0
int itemsSelected = drawing->document.ItemsSelected();
// If nothing selected, do nothing
// Need the parent of the group, we're assuming here that the parent is
// the drawing's document. Does it matter? Maybe...
- // Could just stipulate that grouping like this only takes place where the
- // parent of the group is the drawing's document. Makes life much simpler.
+ // Could just stipulate that grouping like this only takes place where
+ // the parent of the group is the drawing's document. Makes life much
+ // simpler.
((Container *)object)->SelectAll();
((Container *)object)->MoveContentsTo(&(drawing->document));
drawing->document.Delete(object);
container->state = OSSelected;
statusBar()->showMessage(QString(tr("Grouped %1 objects.")).arg(itemsSelected));
}
+#else
+ int numSelected = drawing->select.size();
+
+ // If nothing selected, do nothing
+ if (numSelected == 0)
+ {
+ statusBar()->showMessage(tr("No objects selected to make a group from."));
+ return;
+ }
+
+ // If it's a group that's selected, ungroup it and leave the objects in a
+ // selected state
+ if (numSelected == 1)
+ {
+ Object * obj = (Object *)drawing->select[0];
+
+ if (obj->type != OTContainer)
+ {
+ statusBar()->showMessage(tr("A group requires two or more selected objects."));
+ return;
+ }
+
+ // Need the parent of the group, we're assuming here that the parent is
+ // the drawing's document. Does it matter? Maybe...
+ // Could just stipulate that grouping like this only takes place where
+ // the parent of the group is the drawing's document. Makes life much
+ // simpler.
+// ((Container *)object)->SelectAll();
+// ((Container *)object)->MoveContentsTo(&(drawing->document));
+// drawing->document.Delete(object);
+ Container * c = (Container *)obj;
+//printf("Ungroup: container size = %li\n", c->objects.size());
+ SelectAll(c->objects);
+//printf("Ungroup: document size = %li (pre-AddObjectsTo)\n", drawing->document.objects.size());
+ RemoveSelectedObjects(drawing->document.objects);
+ AddObjectsTo(drawing->document.objects, c->objects);
+ drawing->select.clear();
+ AddObjectsTo(drawing->select, c->objects);
+ delete c;
+ statusBar()->showMessage(tr("Objects ungrouped."));
+//printf("Ungroup: document size = %li\n", drawing->document.objects.size());
+ }
+ // Otherwise, if it's a group of 2 or more objects (which can be groups too)
+ // group them and select the group
+ else if (numSelected > 1)
+ {
+// Container * container = new Container(Vector(), &(drawing->document));
+// drawing->document.MoveSelectedContentsTo(container);
+// drawing->document.Add(container);
+// container->DeselectAll();
+// container->state = OSSelected;
+
+ Container * c = new Container();
+// AddObjectsTo(c->objects, drawing->select);
+// RemoveSelectedObjects(drawing->document.objects);
+ MoveSelectedObjectsTo(c->objects, drawing->document.objects);
+ drawing->document.objects.push_back(c);
+ ClearSelected(c->objects);
+ c->selected = true;
+ c->layer = Global::currentLayer;
+
+ Rect r = drawing->GetObjectExtents((Object *)c);
+ c->p[0] = r.TopLeft();
+ c->p[1] = r.BottomRight();
+
+ drawing->select.clear();
+ drawing->select.push_back(c);
+ statusBar()->showMessage(QString(tr("Grouped %1 objects.")).arg(numSelected));
+//printf("Group: document size = %li\n", drawing->document.objects.size());
+ }
+#endif
drawing->update();
}
void ApplicationWindow::HandleConnection(void)
{
+#if 0
//double tt = Geometry::ParameterOfLineAndPoint(Vector(0, 0), Vector(10, 0), Vector(8, 2));
//printf("Parameter of point @ (8,2) of line (0,0), (10,0): %lf\n", tt);
int itemsSelected = drawing->document.ItemsSelected();
}
}
}
+#else
+#endif
}
// drawing->gridSpacing = value;
// Painter::zoom = drawing->gridPixels / drawing->gridSpacing;
- Object::gridSpacing = value;
- Painter::zoom = drawing->gridPixels / Object::gridSpacing;
+ Global::gridSpacing = value;
+ Global::zoom = drawing->gridPixels / Global::gridSpacing;
drawing->UpdateGridBackground();
drawing->update();
}
void ApplicationWindow::HandleDimensionSize(QString text)
{
+/*
+This is the third input on the view toolbar; not sure what it was supposed to do...
+*/
// Parse the text...
bool ok;
double value = text.toDouble(&ok);
if (!ok || value == 0)
return;
- drawing->document.ResizeAllDimensions(value);
-// drawing->gridSpacing = value;
-// Painter::zoom = drawing->gridPixels / drawing->gridSpacing;
-// drawing->UpdateGridBackground();
+// drawing->document.ResizeAllDimensions(value);
drawing->update();
}
+void ApplicationWindow::EditCopy(void)
+{
+ if (drawing->select.size() > 0)
+ {
+ DeleteContents(clipboard);
+ CopySelectedObjectsTo(clipboard, drawing->document.objects);
+ }
+}
+
+
+void ApplicationWindow::EditCut(void)
+{
+ if (drawing->select.size() > 0)
+ {
+ DeleteContents(clipboard);
+ MoveSelectedObjectsTo(clipboard, drawing->document.objects);
+ drawing->update();
+ }
+}
+
+
+void ApplicationWindow::EditPaste(void)
+{
+ if (clipboard.size() > 0)
+ {
+ // We want to maybe make it so that the pasted objects are being moved in a "mouse drag" state...
+ // This only moves the cut/copied from the clipboard to the drawing.
+// AddObjectsTo(drawing->document.objects, clipboard);
+ CopyObjects(clipboard, drawing->document.objects);
+ drawing->update();
+ }
+}
+
void ApplicationWindow::CreateActions(void)
{
addPolygonAct = CreateAction(tr("Add &Polygon"), tr("Add Polygon"), tr("Add polygons to the drawing."), QIcon(":/res/add-polygon-tool.png"), QKeySequence("A,P"), true);
connect(addPolygonAct, SIGNAL(triggered()), this, SLOT(AddPolygonTool()));
+ addSplineAct = CreateAction(tr("Add &Spline"), tr("Add Spline"), tr("Add a NURB spline to the drawing."), QIcon(":/res/add-spline-tool.png"), QKeySequence("A,S"), true);
+ connect(addSplineAct, SIGNAL(triggered()), this, SLOT(AddSplineTool()));
+
aboutAct = CreateAction(tr("About &Architektonas"), tr("About Architektonas"), tr("Gives information about this program."), QIcon(":/res/generic-tool.png"), QKeySequence());
connect(aboutAct, SIGNAL(triggered()), this, SLOT(HelpAbout()));
mirrorAct = CreateAction(tr("&Mirror"), tr("Mirror"), tr("Mirror selected objects around a line."), QIcon(":/res/mirror-tool.png"), QKeySequence("m,i"), true);
connect(mirrorAct, SIGNAL(triggered()), this, SLOT(MirrorTool()));
+ trimAct = CreateAction(tr("&Trim"), tr("Trim"), tr("Trim extraneous lines from selected objects."), QIcon(":/res/trim-tool.png"), QKeySequence("t,r"), true);
+ connect(trimAct, SIGNAL(triggered()), this, SLOT(TrimTool()));
+
+ triangulateAct = CreateAction(tr("&Triangulate"), tr("Triangulate"), tr("Make triangles from selected lines, preserving their lengths."), QIcon(":/res/triangulate-tool.png"), QKeySequence("t,g"), true);
+ connect(triangulateAct, SIGNAL(triggered()), this, SLOT(TriangulateTool()));
+
+ editCutAct = CreateAction(tr("&Cut Objects"), tr("Cut Objects"), tr("Cut objects from the drawing to the clipboard."), QIcon(":/res/editcut2.png"), QKeySequence(tr("Ctrl+x")));
+ connect(editCutAct, SIGNAL(triggered()), this, SLOT(EditCut()));
+
+ editCopyAct = CreateAction(tr("&Copy Objects"), tr("Copy Objects"), tr("Copy objects from the drawing to the clipboard."), QIcon(":/res/editcopy2.png"), QKeySequence(tr("Ctrl+c")));
+ connect(editCopyAct, SIGNAL(triggered()), this, SLOT(EditCopy()));
+
+ editPasteAct = CreateAction(tr("&Paste Objects"), tr("Paste Objects"), tr("Paste objects from the clipboard to the drawing."), QIcon(":/res/editpaste2.png"), QKeySequence(tr("Ctrl+v")));
+ connect(editPasteAct, SIGNAL(triggered()), this, SLOT(EditPaste()));
//Hm. I think we'll have to have separate logic to do the "Radio Group Toolbar" thing...
// Yup, in order to turn them off, we'd have to have an "OFF" toolbar button. Ick.
//
// Consolidates action creation from a multi-step process to a single-step one.
//
-QAction * ApplicationWindow::CreateAction(QString name, QString tooltip, QString statustip,
- QIcon icon, QKeySequence key, bool checkable/*= false*/)
+QAction * ApplicationWindow::CreateAction(QString name, QString tooltip,
+ QString statustip, QIcon icon, QKeySequence key, bool checkable/*= false*/)
{
QAction * action = new QAction(icon, name, this);
action->setToolTip(tooltip);
// This is essentially the same as the previous function, but this allows more
// than one key sequence to be added as key shortcuts.
//
-QAction * ApplicationWindow::CreateAction(QString name, QString tooltip, QString statustip,
- QIcon icon, QKeySequence key1, QKeySequence key2, bool checkable/*= false*/)
+QAction * ApplicationWindow::CreateAction(QString name, QString tooltip,
+ QString statustip, QIcon icon, QKeySequence key1, QKeySequence key2,
+ bool checkable/*= false*/)
{
QAction * action = new QAction(icon, name, this);
action->setToolTip(tooltip);
menu->addAction(fixLengthAct);
menu->addAction(rotateAct);
menu->addAction(mirrorAct);
+ menu->addAction(trimAct);
+ menu->addAction(triangulateAct);
menu->addAction(connectAct);
menu->addAction(disconnectAct);
menu->addSeparator();
+ menu->addAction(editCutAct);
+ menu->addAction(editCopyAct);
+ menu->addAction(editPasteAct);
menu->addAction(deleteAct);
menu->addSeparator();
menu->addAction(addLineAct);
menu->addAction(addCircleAct);
menu->addAction(addArcAct);
menu->addAction(addPolygonAct);
+ menu->addAction(addSplineAct);
menu->addAction(addDimensionAct);
menu->addSeparator();
menu->addAction(settingsAct);
toolbar->addAction(fixLengthAct);
toolbar->addAction(rotateAct);
toolbar->addAction(mirrorAct);
+ toolbar->addAction(trimAct);
+ toolbar->addAction(triangulateAct);
+ toolbar->addAction(editCutAct);
+ toolbar->addAction(editCopyAct);
+ toolbar->addAction(editPasteAct);
toolbar->addAction(deleteAct);
toolbar->addAction(connectAct);
toolbar->addAction(disconnectAct);
toolbar->addAction(addCircleAct);
toolbar->addAction(addArcAct);
toolbar->addAction(addPolygonAct);
+ toolbar->addAction(addSplineAct);
toolbar->addAction(addDimensionAct);
spinbox->setRange(4, 256);
connect(spinbox, SIGNAL(valueChanged(int)), this, SLOT(HandleGridSizeInPixels(int)));
connect(baseUnitInput, SIGNAL(textChanged(QString)), this, SLOT(HandleGridSizeInBaseUnits(QString)));
connect(dimensionSizeInput, SIGNAL(textChanged(QString)), this, SLOT(HandleDimensionSize(QString)));
+
+ PenWidget * pw = new PenWidget();
+ toolbar = addToolBar(tr("Pen"));
+ toolbar->setObjectName(tr("Pen"));
+ toolbar->addWidget(pw);
+ connect(drawing, SIGNAL(ObjectSelected(Object *)), pw, SLOT(SetFields(Object *)));
+ connect(pw, SIGNAL(WidthSelected(float)), drawing, SLOT(HandlePenWidth(float)));
+ connect(pw, SIGNAL(StyleSelected(int)), drawing, SLOT(HandlePenStyle(int)));
+ connect(pw, SIGNAL(ColorSelected(uint32_t)), drawing, SLOT(HandlePenColor(uint32_t)));
}
projects / architektonas / blobdiff