<p>
Personal monitoring can allow a performer with a smart phone to set
- their personal monitor mix for a floor wedge or inear monitoring.
+ their personal monitor mix for a floor wedge or in-ear monitoring.
In Ardour 5.6 OSC commands to allow this were added.
</p>
<h3>Setup</h3>
<em>/cue</em>. It is expected that a surface used as a personal
monitor control will use only <em>/cue</em> commands.
</p>
+<p>
+ Most phone OSC applets (TouchOSC, Control) require manual port to be set.
+ There are certainly more controls than needed. Using send enables for
+ example, may lead to wasted time discovering why a send has no sound.
+ A good easy to use controler that fits on most phones while still
+ being controllable even with big fingers might look like:
+</p>
+<img alt="TouchOSC Screenshot"
+ src="/images/osc-cue-screen">
<p class="note">
The send controls and feedback all have the send id (1 to n) in line
as part of the OSC path. So the path for the second send would be
most surfaces used for this will only be able to handle one parameter.
</p>
<h4>Commands</h4>
-<dl class="bindings">
- <dt><kbd class="osc">/cue/connect</kbd></dt>
- <dd>Returns a list of aux busses.</dd>
- <dt><kbd class="osc">/cue/aux <em>aux-number</em></kbd></dt>
- <dd>where <em>aux-number</em> is an integer which is the aux bus
- number this surface will use.</dd>
- <dt><kbd class="osc">/cue/next_aux</kbd></dt>
- <dd>Sets the the aux bus to one bus higher.</dd>
- <dt><kbd class="osc">/cue/previous_aux</kbd></dt>
- <dd>Sets the aux to one bus lower.</dd>
- <dt><kbd class="osc">/cue/connect</kbd></dt>
- <dd>Returns a list of aux busses.</dd>
- <dt><kbd class="osc">/cue/fader <em>position</em></kbd></dt>
- <dd>where <em>position</em> is a float for the position of the fader
- between 0.0 and 1.0.</dd>
- <dt><kbd class="osc">/cue/mute <em>state</em></kbd></dt>
- <dd>where <em>state</em> is a float of 0.0 for mute off and 1.0 for mute on.</dd>
- <dt><kbd class="osc">/cue/send/fader/<em>id</em> <em>position</em></kbd></dt>
- <dd>where <em>position</em> is a float for the position of the fader
- between 0.0 and 1.0.</dd>
- <dt><kbd class="osc">/cue/send/enable/<em>id</em> <em>state</em></kbd></dt>
- <dd>where <em>state</em> is a float of 0.0 for disable and 1.0 for enable.</dd>
-</dl>
+<table class="dl">
+ <tr><th><kbd class="osc">/cue/connect</kbd></th>
+ <td>Returns a list of aux busses and connects to the first.</td></tr>
+ <tr><th><kbd class="osc">/cue/aux <em>aux-number</em></kbd></th>
+ <td>where <em>aux-number</em> is an integer or float which is the aux bus
+ number this surface will use.</td></tr>
+ <tr><th><kbd class="osc">/cue/next_aux</kbd></th>
+ <td>Sets the the aux bus to one bus higher.</td></tr>
+ <tr><th><kbd class="osc">/cue/previous_aux</kbd></th>
+ <td>Sets the aux to one bus lower. This can also be used as a "connect"
+ button to save space in a phone layout.</td></tr>
+ <tr><th><kbd class="osc">/cue/fader <em>position</em></kbd></th>
+ <td>where <em>position</em> is a float for the position of the fader
+ between 0.0 and 1.0.</td></tr>
+ <tr><th><kbd class="osc">/cue/mute <em>state</em></kbd></th>
+ <td>where <em>state</em> is a float of 0.0 for mute off and 1.0 for the Aux bus mute on.</td></tr>
+ <tr><th><kbd class="osc">/cue/send/fader/<em>id</em> <em>position</em></kbd></th>
+ <td>where <em>position</em> is a float for the position of the fader
+ between 0.0 and 1.0.</td></tr>
+ <tr><th><kbd class="osc">/cue/send/enable/<em>id</em> <em>state</em></kbd></th>
+ <td>where <em>state</em> is a float of 0.0 for disable and 1.0 for enable.</td></tr>
+</table>
<h4>Feedback</h4>
-<dl class="bindings">
- <dt><kbd class="osc">/cue/name <em>name</em></kbd></dt>
- <dd>where <em>name</em> is a string that is the name of the currently
- selected aux bus.</dd>
- <dt><kbd class="osc">/cue/name/<em>id</em> <em>name</em></kbd></dt>
- <dd>where <em>name</em> is a string that is the name of the aux bus
- that <em>id</em> belongs to.</dd>
- <dt><kbd class="osc">/cue/fader <em>position</em></kbd></dt>
- <dd>where <em>position</em> is a float from 0.0 to 1.0 that shows the
- fader position for the selected aux bus.</dd>
- <dt><kbd class="osc">/cue/mute <em>state</em></kbd></dt>
- <dd>where <em>state</em> is a float of 0.0 or 1.0 that shows the state
- of the mute for the selected aux bus.</dd>
- <dt><kbd class="osc">/cue/signal <em>activity</em></kbd></dt>
- <dd>where <em>activity</em> is a float of 0.0 or 1.0 that shows audio
- activity for the selected aux bus.</dd>
- <dt><kbd class="osc">/cue/send/name/<em>id</em> <em>name</em></kbd></dt>
- <dd>where <em>name</em> is a string that is the name of the channel
- that send <em>id</em> belongs to.</dd>
- <dt><kbd class="osc">/cue/send/fader/<em>id</em> <em>position</em></kbd></dt>
- <dd>where <em>position</em> is a float from 0.0 to 1.0 that is the position
- for the fader for the send that <em>id</em> belongs to.</dd>
- <dt><kbd class="osc">/cue/send/enable/<em>id</em> <em>state</em></kbd></dt>
- <dd>where <em>state</em> is a float of 0.0 or 1.0 that is the state
- of the enable for the send that <em>id</em> belongs to.</dd>
-</dl>
+<table class="dl">
+ <tr><th><kbd class="osc">/cue/name <em>name</em></kbd></th>
+ <td>where <em>name</em> is a string that is the name of the currently
+ selected aux bus.</td></tr>
+ <tr><th><kbd class="osc">/cue/name/<em>id</em> <em>name</em></kbd></th>
+ <td>where <em>name</em> is a string that is the name of the aux bus
+ that <em>id</em> belongs to.</td></tr>
+ <tr><th><kbd class="osc">/cue/fader <em>position</em></kbd></th>
+ <td>where <em>position</em> is a float from 0.0 to 1.0 that shows the
+ fader position for the selected aux bus.</td></tr>
+ <tr><th><kbd class="osc">/cue/mute <em>state</em></kbd></th>
+ <td>where <em>state</em> is a float of 0.0 or 1.0 that shows the state
+ of the mute for the selected aux bus.</td></tr>
+ <tr><th><kbd class="osc">/cue/signal <em>activity</em></kbd></th>
+ <td>where <em>activity</em> is a float of 0.0 or 1.0 that shows audio
+ activity for the selected aux bus.</td></tr>
+ <tr><th><kbd class="osc">/cue/send/name/<em>id</em> <em>name</em></kbd></th>
+ <td>where <em>name</em> is a string that is the name of the channel
+ that send <em>id</em> belongs to.</td></tr>
+ <tr><th><kbd class="osc">/cue/send/fader/<em>id</em> <em>position</em></kbd></th>
+ <td>where <em>position</em> is a float from 0.0 to 1.0 that is the position
+ for the fader for the send that <em>id</em> belongs to.</td></tr>
+ <tr><th><kbd class="osc">/cue/send/enable/<em>id</em> <em>state</em></kbd></th>
+ <td>where <em>state</em> is a float of 0.0 or 1.0 that is the state
+ of the enable for the send that <em>id</em> belongs to.</td></tr>
+</table>
<p>
While a fader is being adjusted, the corresponding <em>/*/name</em>
text will give the level in db.
projects / ardour-manual / blobdiff