to turn various kinds of feedback on or off or to determine which
kinds of strips are currently viewed/controlled.
</p>
-<p>Both ,<em>feedback</em> and <em>strip-types</em> use bitsets to keep
+<p>Both <em>feedback</em> and <em>strip-types</em> use bitsets to keep
track what they are doing. Any number in a computer is made out of
bits that are on or off, but we represent them as normal base 10
numbers. Any one bit turned on will add a unique value to the
number as a whole. So for each kind of feedback or strip type
to be used, that number should be added to the total.</p>
-<h3>strip_types</h3>
+<h2>strip_types</h2>
<p>
strip_types is an integer made up of bits. The easy way to
deal with this is to think of strip_types items being worth a number and
</p>
<ul>
<li>
- 1 - AudioTracks.
+ 1: AudioTracks.
</li>
<li>
- 2 - MidiTracks.
+ 2: MidiTracks.
</li>
<li>
- 4 - AudioBuses.
+ 4: AudioBusses.
</li>
<li>
- 8 - MidiBuses.
+ 8: MidiBusses.
</li>
<li>
- 16 - VCAs.
+ 16: VCAs.
</li>
<li>
- 32 - Master.
+ 32: Master.
</li>
<li>
- 64 - Monitor.
+ 64: Monitor.
</li>
<li>
- 128 - Audio Aux.
+ 128: Audio Aux.
</li>
<li>
- 256 - Selected.
+ 256: Selected.
</li>
<li>
- 512 - Hidden.
+ 512: Hidden.
+ </li>
+ <li>
+ 1024: Use Group.
</li>
</ul>
<p class="note">
Hidden strips. Using Hidden with other flags will allow Hidden strips
to show inline with other strips.
</p>
+<p class="note" id="use-group">
+ Use Group on will tell ardour that any control on a strip that is part
+ of a group will affect all strips within that group. Default is off
+ or the control should only affect the strip the control is applied to.
+ The <code>/use_group f state</code> command can be used to temporarily
+ change this on the fly.
<p>
- Some handy numbers to use might be: 15 (all tracks and buses), 31
- (add VCAs to that). Master or Monitor strips are generally not useful
- on a surface that has dedicated controls for these strips as there are
- /master* and /monitor* commands already. However, on a surface with
- just a bank of fader strips, adding master or monitor would allow
- access to them within the banks. Selected would be useful for working
- on a group or a set of user selected strips. Hidden shows strips the
- GUI has hidden.
+ Some handy numbers to use might be: 15 (all tracks and busses -
+ 1 + 2 + 4 + 8), 31
+ (add VCAs to that - 15 + 16). Master or Monitor strips are generally
+ not useful on a surface that has dedicated controls for these strips
+ as there are /master* and /monitor* commands already. However, on a
+ surface with just a bank of fader strips, adding master or monitor
+ would allow access to them within the banks. Selected would be useful
+ for working on a group or a set of user selected strips. Hidden shows
+ strips the GUI has hidden.
</p>
<p class-"note">
Audio Aux? say what? I am sure most people will have noticed that they
can find no <em>Aux</em> strips in the Ardour mixer. There are none.
- There are buses that can be used a number of ways. From analog days,
+ There are busses that can be used a number of ways. From analog days,
in OSC, a bus is something that gets used as a sub mix before ending up
going to Master. An auxiliary bus is used like a separate mixer and
- it's output goes outside the program or computer to be used as:
+ its output goes outside the program or computer to be used as:
a monitor mix, a back up recording, or what have you. In OSC where
controller strips may be limited, it may be useful not to use up a
strip for an aux that is not really a part of the mix. It is also
- useful to get a list of only aux buses if the control surface is a
+ useful to get a list of only aux busses if the control surface is a
phone used to provide talent monitor mix control on stage. Each
performer would be able to mix their own monitor. The user is free
- to enable both buses and auxes if they would prefer.
+ to enable both busses and auxes if they would prefer.
</p>
-<h3>feedback</h3>
+<h2 id="feedback">feedback</h2>
<p>Feedback is an integer made up of bits. The easy way to
deal with this is to think of feedback items being worth a number and
then adding all those numbers together for a value to send.
</p>
<ul>
<li>
- 1 - Button status for strips.
+ 1: Button status for strips.
</li>
<li>
- 2 - Variable control values for strips.
+ 2: Variable control values for strips.
</li>
<li>
- 4 - Send SSID as path extension.
+ 4: Send SSID as path extension.
</li>
<li>
- 8 - heartbeat to surface.
+ 8: heartbeat to surface.
</li>
<li>
- 16 - Enable master section feedback.
+ 16: Enable master section feedback.
</li>
<li>
- 32 - Send Bar and Beat.
+ 32: Send Bar and Beat.
</li>
<li>
- 64 - Send timecode.
+ 64: Send timecode.
</li>
<li>
- 128 - Send meter as dB (-193 to +6) or 0 to 1 depending on gainmode
+ 128: Send meter as dB (-193 to +6) or 0 to 1 depending on gainmode
</li>
<li>
- 256 - Send meter a 16 bit value where each bit is a level
+ 256: Send meter a 16 bit value where each bit is a level
and all bits of lower level are on. For use in a LED strip. This
will not work if the above option is turned on.
</li>
<li>
- 512 - Send signal present, true if level is higher than -40dB
+ 512: Send signal present, true if level is higher than -40dB
</li>
<li>
- 1024 - Send position in samples
+ 1024: Send position in samples
</li>
<li>
- 2048 - Send position in time, hours, minutes, seconds and milliseconds
+ 2048: Send position in time, hours, minutes, seconds and milliseconds
+ </li>
+ <li>
+ 8192: Turn on select channel feedback
</li>
<li>
- 8192 - Turn on extra select channel feedback beyond what a /strip supports
+ 16384: Use OSC 1.0 /reply instead of #reply
</li>
</ul>
<p>
- So using a value of 19 would turn on feedback for strip and master
- controls, but leave meters, timecode and bar/beat feedback off.
+ So using a value of 19 (1 + 2 + 16) would turn on feedback for strip
+ and master controls, but leave meters, timecode and bar/beat feedback off.
</p>