<a href="@@monitoring-tab">
<kbd class="menu">Session > Properties</kbd> window</a> by enabling the
<kbd class="option">Use monitor section in this session</kbd> option in the
- <kbd class="menu">Monitoring</kbd> tab. By default the Monitor Section is fed with audio from the Master Buss, but depending on solo mode and other functions such as Auditioning, other audio sources may be temporarily heard instead.
+ <kbd class="menu">Monitoring</kbd> tab. By default the Monitor Section is fed with audio from the Master Bus, but depending on solo mode and other functions such as Auditioning, other audio sources may be temporarily heard instead.
</p>
<p>
The Monitor section appears on the right hand side of the Mixer, and comprises:
<p>
The SiP, PFL and AFL controls inter-cancel with each other and select the desired Solo mode. Excl. Solo and Solo Mute then modify the modes behaviour. See <a href="@@muting-and-soloing">Muting and Soloing</a>. The current mode is indicated by the illuminated 'LED' on the button.
</p>
-<dl>
- <dt>SiP</dt><dd>This selects <em>Solo In Place</em> as the current solo mode and cancells the previous mode.</dd>
- <dt>PFL</dt><dd>This selects <em>Pre Fade Listen</em> as the current solo mode and cancells the previous mode.</dd>
- <dt>AFL</dt><dd>This selects <em>After Fade Listen</em> as the current solo mode and cancells the previous mode.</dd>
- <dt>Excl. Solo</dt><dd>This enables or disables the <em>Exclusive Solo</em> option.</dd>
- <dt>Solo » Mute</dt><dd>This enables or disables the <em>Solo Mute</em> option.</dd>
-</dl>
+<table class="dl">
+ <tr><th>SiP</th><td>This selects <em>Solo In Place</em> as the current solo mode and cancells the previous mode.</td></tr>
+ <tr><th>PFL</th><td>This selects <em>Pre Fade Listen</em> as the current solo mode and cancells the previous mode.</td></tr>
+ <tr><th>AFL</th><td>This selects <em>After Fade Listen</em> as the current solo mode and cancells the previous mode.</td></tr>
+ <tr><th>Excl. Solo</th><td>This enables or disables the <em>Exclusive Solo</em> option.</td></tr>
+ <tr><th>Solo » Mute</th><td>This enables or disables the <em>Solo Mute</em> option.</td></tr>
+</table>
<p class=note>
Changing the solo mode (SiP, PFL or AFL) will update the labels on the mixer strips' solo controls accordingly.
<p>
These controls set the level of the audio when a channel or bus solo is engaged.
</p>
-<dl>
- <dt>Solo Boost</dt><dd>This is the level that will be added to the current main monitor level when a track or bus is soloed, providing a conveniant boost in level for the isolated signal. The rotary control has a range of 0dB to +10dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience.</dd>
- <dt>SiP Cut</dt><dd>Only relevant to Solo in Place mode. This sets the level that all muted tracks or busses will be muted by. By default it is -&infinity; i.e. the non soloed tracks are totally inaudible. The level can be raised to make the other tracks audible, though dimmed. This is also sometimes referred to <em>Solo in Front</em>. The rotary control has a range of -inf to +0dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience.</dd>
-</dl>
+<table class="dl">
+ <tr><th>Solo Boost</th><td>This is the level that will be added to the current main monitor level when a track or bus is soloed, providing a conveniant boost in level for the isolated signal. The rotary control has a range of 0dB to +10dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience.</td></tr>
+ <tr><th>SiP Cut</th><td>Only relevant to Solo in Place mode. This sets the level that all muted tracks or busses will be muted by. By default it is -&infinity; i.e. the non soloed tracks are totally inaudible. The level can be raised to make the other tracks audible, though dimmed. This is also sometimes referred to <em>Solo in Front</em>. The rotary control has a range of -inf to +0dB and can be set at any point between these two values. A drop down menu with pre-defined values is also provided for convenience.</td></tr>
+</table>
<h2>Dim level control</h2>
<p>
Each of the individual paths through the Monitor Section, (e.g. <kbd class="menu">L</kbd> and <kbd class="menu">R</kbd> for stereo), can be controlled individually. Four functions are available:
</p>
-<dl>
- <dt>Mute</dt><dd>Mutes the selected path(s)</dd>
- <dt>Dim</dt><dd>Reduces the selected path(s) level by the amount set with the Dim level control</dd>
- <dt>Solo</dt><dd>Soloes the selected channel(s)</dd>
- <dt>Inv</dt><dd>Inverts the selected channel(s) polarity</dd>
-</dl>
+<table class="dl">
+ <tr><th>Mute</th><td>Mutes the selected path(s)</td></tr>
+ <tr><th>Dim</th><td>Reduces the selected path(s) level by the amount set with the Dim level control</td></tr>
+ <tr><th>Solo</th><td>Soloes the selected channel(s)</td></tr>
+ <tr><th>Inv</th><td>Inverts the selected channel(s) polarity</td></tr>
+</table>
<h2>Global Monitor controls</h2>
Clicking on this button shows a menu that allows quick and convenient routing of the Monitor Section's outputs to audio hardware outputs, e.g. to feed control room monitors.
It also has an option to open Ardours routing matrix, where more detailed connectivity is available if routing to something other than hardware is required.
</p>
-
projects / ardour-manual / blobdiff