<h2 id="Preface">Preface</h2>
<p>
-There are cases that a Ardour cannot reasonably cater for with core functionality by itself, either because they're session specific or user specific edge cases.
+There are cases that Ardour cannot reasonably cater to with core functionality alone, either because they're session specific
+or user specific edge cases.
</p><p>
Examples for these include voice-activate (record-arm specific tracks and roll transport depending on signal levels),
-rename all regions after a specific timecode, launch an external application when a certain track is soloed, generate automation curves
-or simply provide a quick shortcut for a custom batch operation.
+rename all regions after a specific timecode, launch an external application when a certain track is soloed, generate
+automation curves or simply provide a quick shortcut for a custom batch operation.
</p><p>
Cases like this call for means to extend the DAW without actually changing the DAW itself. This is where scripting comes in.
</p><p>
Lua is also a glue language it allows to tie existing component in Ardour together in unprecedented ways,
and most importantly Lua is one of the few scripting-languages which can be safely used in a real-time environment.
</p><p>
-A good introduction to Lua is the book <a href="http://www.lua.org/pil/">Programming in Lua</a>. The first edition is available online,
-but if you have the means buy a copy of the book, it not only helps to support the Lua project,
-but provides for a much nicer reading and learning experience.
+A good introduction to Lua is the book <a href="http://www.lua.org/pil/">Programming in Lua</a>. The first edition is
+available online, but if you have the means buy a copy of the book, it not only helps to support the Lua project, but provides
+for a much nicer reading and learning experience.
</p>
<h2 id="Overview">Overview</h2>
<p>
-The core of ardour is a real-time audio engine that runs and processes audio. One interfaces with than engine by sending it commands.
-Scripting can be used to interact with or modify active Ardour session. Just like a user uses the Editor/Mixer GUI to modify the state or parameters of the session.
+The core of Ardour is a real-time audio engine that runs and processes audio. One interfaces with an engine by sending it
+commands. Scripting can be used to interact with or modify the active Ardour session, just like a user uses the Editor/Mixer
+GUI to modify the state or parameters of the session.
</p><p>
Doing this programmatically requires some knowledge about the objects used internally.
Most Ardour C++ objects and their methods are directly exposed to Lua and one can call functions or modify variables:
<div style="clear:both;"></div>
<p>
-You may notice that there is only a small syntactic difference, in this case.
-While C++ requires recompiling the application for every change, Lua script can be loaded, written or modified while the application is running.
-Lua also abstracts away many of the C++ complexities such as object lifetime, type conversion and null-pointer checks.
+You may notice that there is only a small syntactic difference in this case.
+While C++ requires recompiling the application for every change, Lua script can be loaded, written or modified while the
+application is running. Lua also abstracts away many of the C++ complexities such as object lifetime, type conversion and
+null-pointer checks.
</p><p>
Close ties with the underlying C++ components is where the power of scripting comes from.
A script can orchestrate interaction of lower-level components which take the bulk of the CPU time of the final program.
</p>
</p><p>
-At the time of writing Ardour integrates Lua 5.3.2: <a href="http://www.lua.org/manual/5.3/manual.html">Lua 5.3 reference manual</a>.
+At the time of writing Ardour integrates Lua 5.3.5: <a href="http://www.lua.org/manual/5.3/manual.html">Lua 5.3 reference
+manual</a>.
</p>
<h2 id="Integration">Integration</h2>
<p>
-Like Control surfaces and the GUI, Lua Scripts are confined to certain aspects of the program. Ardour provides the framework and runs Lua (not the other way around).
+Like Control surfaces and the GUI, Lua Scripts are confined to certain aspects of the program. Ardour provides the framework
+and runs Lua (not the other way around).
</p>
<p>
In Ardour's case Lua is available:
</p>
-<dl>
- <dt>Editor Action Scripts</dt><dd>User initiated actions (menu, shortcuts) for batch processing</dd>
- <dt>Editor Hooks/Callbacks</dt><dd>Event triggered actions for the Editor/Mixer GUI</dd>
- <dt>Session Scripts</dt><dd>Scripts called at the start of every audio cycle (session, real-time)</dd>
- <dt>DSP Scripts</dt><dd>Audio/Midi processor - plugins with access to the Ardour session (per track/bus, real-time)</dd>
- <dt>Script Console</dt><dd>Action Script commandline</dd>
-</dl>
+<table class="dl">
+ <tr><th>Editor Action Scripts</th><td>User initiated actions (menu, shortcuts) for batch processing</td></tr>
+ <tr><th>Editor Hooks/Callbacks</th><td>Event triggered actions for the Editor/Mixer GUI</td></tr>
+ <tr><th>Session Scripts</th><td>Scripts called at the start of every audio cycle (session, real-time)</td></tr>
+ <tr><th>DSP Scripts</th><td>Audio/Midi processor - plugins with access to the Ardour session (per track/bus, real-time)</td></tr>
+ <tr><th>Script Console</th><td>Action Script commandline</td></tr>
+</table>
<p>
There are is also a special mode:
</p>
-<dl>
- <dt>Commandline Tool</dt><dd>Replaces the complete Editor GUI, direct access to libardour (no GUI) from the commandline.<br/>
- <em>Be aware that the vast majority of complex functionality is provided by the Editor UI.</em></dd>
-</dl>
+<table class="dl">
+ <tr><th>Commandline Tool</th><td>Replaces the complete Editor GUI, direct access to libardour (no GUI) from the
+ commandline.<br/>
+ <em>Be aware that the vast majority of complex functionality is provided by the Editor UI.</em></td></tr>
+</table>
<h2 id="Managing Scripts">Managing Scripts</h2>
Ardour searches for Lua scripts in the <code>scripts</code> folder in <code>$ARDOUR_DATA_PATH</code>,
Apart from scripts included directly with Ardour, this includes</p>
<table>
- <tr><th>GNU/Linux</th><td><code>$HOME/.config/ardour5/scripts</code></td></tr>
- <tr><th>Mac OS X</th><td><code>$HOME/Library/Preferences/Ardour5/scripts</code></td></tr>
- <tr><th>Windows</th><td><code>%localappdata%\ardour5\scripts</code></td></tr>
+ <tr><th>GNU/Linux</th><td><code>$HOME/.config/ardour6/scripts</code></td></tr>
+ <tr><th>Mac OS X</th><td><code>$HOME/Library/Preferences/Ardour6/scripts</code></td></tr>
+ <tr><th>Windows</th><td><code>%localappdata%\ardour6\scripts</code></td></tr>
</table>
<p>Files must end with <code>.lua</code> file extension.</p>
<p>Scripts are managed via the GUI</p>
-<dl>
- <dt>Editor Action Scripts</dt><dd>Menu → Edit → Scripted Actions → Manage</dd>
- <dt>Editor Hooks/Callbacks</dt><dd>Menu → Edit → Scripted Actions → Manage</dd>
- <dt>Session Scripts</dt><dd>Menu → Session → Scripting → Add/Remove Script</dd>
- <dt>DSP Scripts</dt><dd>Mixer-strip → context menu (right click) → New Lua Proc</dd>
- <dt>Script Console</dt><dd>Menu → Window → Scripting</dd>
-</dl>
+<table class="dl">
+ <tr><th>Editor Action Scripts</th><td>Menu → Edit → Scripted Actions → Manage</td></tr>
+ <tr><th>Editor Hooks/Callbacks</th><td>Menu → Edit → Scripted Actions → Manage</td></tr>
+ <tr><th>Session Scripts</th><td>Menu → Session → Scripting → Add/Remove Script</td></tr>
+ <tr><th>DSP Scripts</th><td>Mixer-strip → context menu (right click) → New Lua Proc</td></tr>
+ <tr><th>Script Console</th><td>Menu → Window → Scripting</td></tr>
+</table>
<h2 id="Script Layout">Script Layout</h2>
<ul>
<li>Every script must include an <code>ardour</code> descriptor table. Required fields are "Name" and "Type".</li>
- <li>A script must provide a <em>Factory method</em>: A function with optional instantiation parameters which returns the actual script.</li>
+ <li>A script must provide a <em>Factory method</em>: A function with optional instantiation parameters which returns the
+ actual script.</li>
<li>[optional]: list of parameters for the "factory".</li>
- <li>in case of DSP scripts, an optional list of automatable parameters and possible audio/midi port configurations, and a <code>dsp_run</code> function, more on that later.</li>
+ <li>in case of DSP scripts, an optional list of automatable parameters and possible audio/midi port configurations, and a
+ <code>dsp_run</code> function, more on that later.</li>
</ul>
</div>
<p>
-The common part for all scripts is the "Descriptor". It's a Lua function which returns a table (key/values) with the following keys (the keys are case-sensitive):
+The common part for all scripts is the "Descriptor". It's a Lua function which returns a table (key/values) with the following
+keys (the keys are case-sensitive):
</p>
-<dl>
- <dt>type [required]</dt><dd>one of "<code>DSP</code>", "<code>Session</code>", "<code>EditorHook</code>", "<code>EditorAction</code>" (the type is not case-sensitive)</dd>
- <dt>name [required]</dt><dd>Name/Title of the script</dd>
- <dt>author</dt><dd>Your Name</dd>
- <dt>license</dt><dd>The license of the script (e.g. "GPL" or "MIT")</dd>
- <dt>description</dt><dd>A longer text explaining to the user what the script does</dd>
-</dl>
+<table class="dl">
+ <tr><th>type [required]</th><td>one of "<code>DSP</code>", "<code>Session</code>", "<code>EditorHook</code>",
+ "<code>EditorAction</code>" (the type is not case-sensitive)</td></tr>
+ <tr><th>name [required]</th><td>Name/Title of the script</td></tr>
+ <tr><th>author</th><td>Your Name</td></tr>
+ <tr><th>license</th><td>The license of the script (e.g. "GPL" or "MIT")</td></tr>
+ <tr><th>description</th><td>A longer text explaining to the user what the script does</td></tr>
+</table>
<p class="note">
-Scripts that come with Ardour (currently mostly examples) can be found in the <a href="https://github.com/Ardour/ardour/tree/master/scripts">Source Tree</a>.
+Scripts that come with Ardour (currently mostly examples) can be found in the
+<a href="https://github.com/Ardour/ardour/tree/master/share/scripts">Source Tree</a>.
</p>
<h3 id="Action Scripts">Action Scripts</h3>
-<p>Action scripts are the simplest form. An anonymous Lua function is called whenever the action is triggered. A simple action script is shown above.</p>
-<p>There are 10 action script slots available, each of which is a standard GUI action available from the menu and hence can be bound to a keyboard shortcut</p>
+<p>Action scripts are the simplest form. An anonymous Lua function is called whenever the action is triggered. A simple action
+script is shown above.</p>
+<p>There are 10 action script slots available, each of which is a standard GUI action available from the menu and hence can be
+bound to a keyboard shortcut.</p>
<h3 id="Session Scripts">Session Scripts</h3>
<p>Session scripts similar to Actions Scripts, except the anonymous function is called periodically every process cycle.
end
a = a + n_samples
if (a > timeout * Session:frame_rate()) then
- Session:request_transport_speed(0.0, true)
+ Session:request_transport_speed (0.0, true, ARDOUR.TransportRequestSource.TRS_UI)
end
end
end
</div>
<h3 id="Action Hooks">Action Hooks</h3>
-<p>Action hook scripts must define an additional function which returns a <em>Set</em> of Signal that which trigger the callback (documenting available slots and their parameters remains to be done).</p>
+<p>Action hook scripts must define an additional function which returns a <em>Set</em> of Signal that which trigger the
+callback (documenting available slots and their parameters remains to be done).</p>
<div>
<pre><code class="lua">
ardour {
<p>See the scripts folder for examples for now.</p>
<p>Some notes for further doc:</p>
<ul>
- <li>required function: <code>dsp_ioconfig ()</code>: return a list of possible audio I/O configurations - follows Audio Unit conventions.</li>
+ <li>required function: <code>dsp_ioconfig ()</code>: return a list of possible audio I/O configurations - follows Audio
+ Unit conventions.</li>
<li>optional function: <code>dsp_dsp_midi_input ()</code>: return true if the plugin can receive midi input</li>
<li>optional function: <code>dsp_params ()</code>: return a table of possible parameters (automatable)</li>
<li>optional function: <code>dsp_init (samplerate)</code>: called when instantiation the plugin with given samplerate.</li>
<li>optional function: <code>dsp_configure (in, out)</code>: called after instantiation with configured plugin i/o.</li>
- <li>required function: <code>dsp_run (ins, outs, n_samples)</code> OR <code>dsp_runmap (bufs, in_map, out_map, n_samples, offset)</code>: DSP process callback. The former is a convenient abstraction that passes mapped buffers (as table). The latter is a direct pass-through matching Ardour's internal <code>::connect_and_run()</code> API, which requires the caller to map and offset raw buffers.</li>
+ <li>required function: <code>dsp_run (ins, outs, n_samples)</code> OR <code>dsp_runmap (bufs, in_map, out_map, n_samples,
+ offset)</code>: DSP process callback. The former is a convenient abstraction that passes mapped buffers (as table). The
+ latter is a direct pass-through matching Ardour's internal <code>::connect_and_run()</code> API, which requires the caller
+ to map and offset raw buffers.</li>
<li>plugin parameters are handled via the global variable <code>CtrlPorts</code>.</li>
- <li>midi data is passed via the global variable <code>mididata</code> which is valid during <code>dsp_run</code> only. (dsp_runmap requires the script to pass raw data from the buffers according to in_map)</li>
- <li>The script has access to the current session via the global variable Session, but access to the session methods are limited to realtime safe functions</li>
+ <li>midi data is passed via the global variable <code>mididata</code> which is valid during <code>dsp_run</code> only.
+ (dsp_runmap requires the script to pass raw data from the buffers according to in_map)</li>
+ <li>The script has access to the current session via the global variable Session, but access to the session methods are
+ limited to realtime safe functions</li>
</ul>
<h2 id="Accessing Ardour Objects">Accessing Ardour Objects</h2>
<p>
The top most object in Ardour is the <code>ARDOUR::Session</code>.
Fundamentally, a Session is just a collection of other things:
-Routes (tracks, busses), Sources (Audio/Midi), Regions, Playlists, Locations, Tempo map, Undo/Redo history, Ports, Transport state & controls, etc.
+Routes (tracks, busses), Sources (Audio/Midi), Regions, Playlists, Locations, Tempo map, Undo/Redo history, Ports, Transport
+state and controls, etc.
</p><p>
Every Lua interpreter can access it via the global variable <code>Session</code>.
</p><p>
-GUI context interpreters also have an additional object in the global environment: The Ardour <code>Editor</code>. The Editor provides access to high level functionality which is otherwise triggered via GUI interaction such as undo/redo, open/close windows, select objects, drag/move regions. It also holds the current UI state: snap-mode, zoom-range, etc.
-The Editor also provides complex operations such as "import audio" which under the hood, creates a new Track, adds a new Source Objects (for every channel) with optional resampling, creates both playlist and regions and loads the region onto the Track all the while displaying a progress information to the user.
+GUI context interpreters also have an additional object in the global environment: The Ardour <code>Editor</code>. The Editor
+provides access to high level functionality which is otherwise triggered via GUI interaction such as undo/redo, open/close
+windows, select objects, drag/move regions. It also holds the current UI state: snap-mode, zoom-range, etc.
+The Editor also provides complex operations such as "import audio" which under the hood, creates a new Track, adds a new
+Source Objects (for every channel) with optional resampling, creates both playlist and regions and loads the region onto the
+Track all the while displaying a progress information to the user.
</p>
<p class="note">
Documenting the bound C++ methods and class hierarchy is somewhere on the ToDo list.
-Meanwhile <a href="https://github.com/Ardour/ardour/blob/master/libs/ardour/luabindings.cc">luabindings.cc</a> is the best we can offer.
+Meanwhile <a href="https://github.com/Ardour/ardour/blob/master/libs/ardour/luabindings.cc">luabindings.cc</a> is the best we
+can offer.
</p>
<h2 id="Concepts">Concepts</h2>
<ul>
- <li>There are no bound constructors: Lua asks Ardour to create objects (e.g. add a new track), then receives a reference to the object to modify it.</li>
- <li>Scripts, once loaded, are saved with the Session (no reference to external files). This provides for portable Sessions.</li>
- <li>Lua Scripts are never executed directly. They provide a "factory" method which can have optional instantiation parameters, which returns a lua closure.</li>
- <li>No external lua modules/libraries can be used, scripts need to be self contained (portable across different systems (libs written in Lua can be used, and important c-libs/functions can be included with ardour if needed).</li>
+ <li>There are no bound constructors: Lua asks Ardour to create objects (e.g. add a new track), then receives a reference
+ to the object to modify it.</li>
+ <li>Scripts, once loaded, are saved with the Session (no reference to external files). This provides for portable
+ Sessions.</li>
+ <li>Lua Scripts are never executed directly. They provide a "factory" method which can have optional instantiation
+ parameters, which returns a Lua closure.</li>
+ <li>No external Lua modules/libraries can be used, scripts need to be self contained (portable across different systems
+ (libs written in Lua can be used, and important c-libs/functions can be included with Ardour if needed).</li>
</ul>
<p>
-Ardour is a highly multithreaded application and interaction between the different threads, particularly real-time threads, needs to to be done with care.
-This part has been abstracted away by providing separate Lua interpreters in different contexts and restricting available interaction:
+Ardour is a highly multithreaded application and interaction between the different threads, particularly real-time threads,
+needs to to be done with care. This part has been abstracted away by providing separate Lua interpreters in different contexts
+and restricting available interaction:
</p>
<ul>
<li>Editor Actions run in a single instance interpreter in the GUI thread.</li>
- <li>Editor Hooks connect to libardour signals. Every Callback uses a dedicated lua interpreter which is in the GUI thread context.</li>
+ <li>Editor Hooks connect to libardour signals. Every Callback uses a dedicated Lua interpreter which is in the GUI thread
+ context.</li>
<li>All Session scripts run in a single instance in the main real-time thread (audio callback)</li>
<li>DSP scripts have a separate instance per script and run in one of the DSP threads.</li>
</ul>
<p>
-The available interfaces differ between contexts. e.g. it is not possible to create new tracks or import audio from real-time context; while it is not possible to modify audio buffers from the GUI thread.
+The available interfaces differ between contexts. For example, it is not possible to create new tracks or import audio from
+real-time context; while it is not possible to modify audio buffers from the GUI thread.
</p>
<h2 id="Current State">Current State</h2>
<li>Further planned work includes:
<ul>
<li>Built-in Script editor (customize/modify Scripts in-place)</li>
- <li>convenience methods (wrap more complex Ardour actions into a library). e.g set plugin parameters, write automation lists from a lua table</li>
+ <li>convenience methods (wrap more complex Ardour actions into a library). e.g set plugin parameters, write
+ automation lists from a Lua table</li>
<li>Add some useful scripts and more examples</li>
- <li>Documentation (Ardour API), also usable for tab-exansion, syntax highlighting</li>
+ <li>Documentation (Ardour API), also usable for tab-expansion, syntax highlighting</li>
<li>bindings for GUI Widgets (plugin UIs, message boxes, etc)</li>
</ul>
<li>
</ul>
+-<h2 id="Examples">Examples</h2>
+-<p>Please see the example <a href="https://github.com/Ardour/ardour/tree/master/share/scripts">scripts included with the source-code</a>.
+All the files that start with a leading underscore are not inlcluded with releases, but are intended as example snippets.</p>
-<h2 id="Examples">Examples</h2>
-<p>Apart from the <a href="https://github.com/Ardour/ardour/tree/master/scripts">scripts included with the source-code</a> here are a few examples without further comments...
-
-<h3 id="Editor Console Examples">Editor Console Examples</h3>
-<div>
-<pre><code class="lua">
-print (Session:route_by_remote_id(1):name())
-
-a = Session:route_by_remote_id(1);
-print (a:name());
-
-print(Session:get_tracks():size())
-
-for i, v in ipairs(Session:unknown_processors():table()) do print(v) end
-for i, v in ipairs(Session:get_tracks():table()) do print(v:name()) end
-
-for t in Session:get_tracks():iter() do print(t:name()) end
-for r in Session:get_routes():iter() do print(r:name()) end
-
-
-Session:tempo_map():add_tempo(ARDOUR.Tempo(100,4), Timecode.BBT_TIME(4,1,0))
-
-
-Editor:set_zoom_focus(Editing.ZoomFocusRight)
-print(Editing.ZoomFocusRight);
-Editor:set_zoom_focus(1)
-
-
-files = C.StringVector();
-files:push_back("/home/rgareus/data/coding/ltc-tools/smpte.wav")
-pos = -1
-Editor:do_import(files, Editing.ImportDistinctFiles, Editing.ImportAsTrack, ARDOUR.SrcQuality.SrcBest, pos, ARDOUR.PluginInfo())
-
-#or in one line:
-Editor:do_import(C.StringVector():add({"/path/to/file.wav"}), Editing.ImportDistinctFiles, Editing.ImportAsTrack, ARDOUR.SrcQuality.SrcBest, -1, ARDOUR.PluginInfo())
-
-# called when a new session is loaded:
-function new_session (name) print("NEW SESSION:", name) end
-
-
-# read/set/describe a plugin parameter
-route = Session:route_by_remote_id(1)
-processor = route:nth_plugin(0)
-plugininsert = processor:to_insert()
-
-plugin = plugininsert:plugin(0)
-print (plugin:label())
-print (plugin:parameter_count())
-
-x = ARDOUR.ParameterDescriptor ()
-_, t = plugin:get_parameter_descriptor(2, x) -- port #2
-paramdesc = t[2]
-print (paramdesc.lower)
-
-ctrl = Evoral.Parameter(ARDOUR.AutomationType.PluginAutomation, 0, 2)
-ac = plugininsert:automation_control(ctrl, false)
-print (ac:get_value ())
-ac:set_value(1.0, PBD.GroupControlDisposition.NoGroup)
-
-# the same using a convenience wrapper:
-route = Session:route_by_remote_id(1)
-proc = t:nth_plugin (i)
-ARDOUR.LuaAPI.set_processor_param (proc, 2, 1.0)
-
-</code></pre>
-</div>
-
-<h3 id="Commandline Session">Commandline Session</h3>
+<h2 id="Commandline Session">Commandline Session</h2>
<p>The standalone tool <code>luasession</code> allows one to access an Ardour session directly from the commandline.
+It can also be used as #! interpreter for scripted sessions.
Interaction is limited by the fact that most actions in Ardour are provided by the Editor GUI.
</p><p>
-<code>luasession</code> provides only two special functions <code>load_session</code> and <code>close_session</code> and exposes the <code>AudioEngine</code> instance as global variable.
+<code>luasession</code> provides only two special functions <code>load_session</code> and <code>close_session</code> and
+exposes the <code>AudioEngine</code> instance as global variable.
</p>
<div>
for i,_ in backend:enumerate_devices():iter() do print (i.name) end
-backend:set_input_device_name("HDA Intel PCH")
-backend:set_output_device_name("HDA Intel PCH")
+backend:set_device_name("HDA Intel PCH")
+backend:set_buffer_size(1024)
print (backend:buffer_size())
print (AudioEngine:get_last_backend_error())
s = load_session ("/home/rgareus/Documents/ArdourSessions/lua2/", "lua2")
-s:request_transport_speed (1.0)
+
+assert (s)
+
+s:request_transport_speed (1.0, true, ARDOUR.TransportRequestSource.TRS_UI)
print (s:transport_rolling())
+
s:goto_start()
+
+ARDOUR.LuaAPI.usleep (10 * 1000000) -- 10 seconds
+
close_session()
</code></pre>
projects / ardour-manual / blobdiff