The order of the faders is either controlled by the order of the tracks in the
mixer or can be set manually by the user.
</p>
-<dl>
- <dt>Encoders</dt>
- <dd>Mixer Pans. The red LEDs show the amount of pan left or right</dd>
- <dt>First Row of Buttons</dt>
- <dd>Mixer Mutes. The button led lights if the track is currently muted</dd>
- <dt>Second Row of Buttons</dt>
- <dd>Select Active Track/Bus. Currently selected track/bus is indicated by the button led</dd>
- <dt>Faders</dt>
- <dd>Mixer Gains</dd>
- <dt>Shift Group</dt>
- <dd>
+<table class="dl">
+ <tr><th>Encoders</th>
+ <td>Mixer Pans. The red LEDs show the amount of pan left or right</td></tr>
+ <tr><th>First Row of Buttons</th>
+ <td>Mixer Mutes. The button led lights if the track is currently muted</td></tr>
+ <tr><th>Second Row of Buttons</th>
+ <td>Select Active Track/Bus. Currently selected track/bus is indicated by the button led</td></tr>
+ <tr><th>Faders</th>
+ <td>Mixer Gains</td></tr>
+ <tr><th>Shift Group</th>
+ <td>
The top and bottom left buttons are the simply shifts to change the function of other buttons
- </dd>
- <dd>
+ </td></tr>
+ <td>
The top right is the <dfn>Fine Control</dfn> button that allows the increment values sent by
by rotary encoders and faders to be a small value for more precise editing. This button
can also act as a shift button.
- </dd>
- <dd>
+ </td></tr>
+ <td>
The bottom right is the <dfn>Global Shift</dfn> button that allows you to change back to the
standard Mixer Pan view from other views and modes. This button can also act as a shift button.
- </dd>
- <dt>Mode Group</dt>
- <dd>The top two buttons functions are not currently implemented in Ardour.</dd>
- <dd>The bottom left button sets the device to <dfn>Pan</dfn> mode and should currently be lit</dd>
- <dd>
+ </td></tr>
+ <tr><th>Mode Group</th>
+ <td>The top two buttons functions are not currently implemented in Ardour.</td></tr>
+ <td>The bottom left button sets the device to <dfn>Pan</dfn> mode and should currently be lit</td></tr>
+ <td>
The bottom right button sets the device to <dfn>Send</dfn> mode but will only allow the switch
if the currently selected track/bus has a send or sends to control.
- </dd>
- <dt>Select Group</dt>
- <dd>
+ </td></tr>
+ <tr><th>Select Group</th>
+ <td>
In this mode they function as bank select left and right. If your session has more than 8 tracks
the next set of 8 tracks is selected with the right button and the faders will move to match the
current gain settings of that bank of 8 tracks/busses. If the last bank contains less than 8
tracks/busses the unused faders will move to the bottom and the pan lights will all turn
off. An unlimited amount of tracks can be controlled with the device.
- </dd>
- <dt>Transport Group</dt>
- <dd>The upper left button controls <dfn>Rewind<dfn>.
- <dd>The upper right button controls <dfn>Fast Foreword</dfn>
- <dd>The lower left button controls stop</dd>
- <dd>The lower right button controls play</dd>
-</dl>
+ </td></tr>
+ <tr><th>Transport Group</th>
+ <td>The upper left button controls <dfn>Rewind<dfn>.
+ <td>The upper right button controls <dfn>Fast Foreword</dfn>
+ <td>The lower left button controls stop</td></tr>
+ <td>The lower right button controls play</td></tr>
+</table>
<h3>Send Mode</h3>
<p>
<img alt="Digramatic Image of the Send Mode"
One interesting option is to flip the controls from the encoders to the faders by pressing
the shift 1 button and the global view button at the same time.
</p>
-<dl>
- <dt>Encoders</dt>
- <dd>
+<table class="dl">
+ <tr><th>Encoders</th>
+ <td>
In send mode, the encoders control sends from left to right instead of mixer pans.
If there are less than 8 sends the behavior of the encoder will be to continue controlling
the mixer pan. Visually it's indicated by the change in the LED from originating at the 12
o'clock position to originating at the 7 o'clock position. If <dfn>FLIP</dfn> is pressed
the encoder will control the mixer gain for the selected track/bus.
- </dd>
- <dt>First row of buttons</dt>
- <dd>No Change</dd>
- <dt>Second row of buttons</dt>
- <dd>No Change.</dd>
- <dt>Faders</dt>
- <dd>
+ </td></tr>
+ <tr><th>First row of buttons</th>
+ <td>No Change</td></tr>
+ <tr><th>Second row of buttons</th>
+ <td>No Change.</td></tr>
+ <tr><th>Faders</th>
+ <td>
No change unless <dfn>FLIP</dfn>is pressed then it controls the send for the selected track/bus.
- </dd>
- <dt>Shift Group</dt>
- <dd>No Change</dd>
- <dt>Select Group</dt>
- <dd>No Change</dd>
- <dt>Transport Group</dt>
- <dd>No Change</dd>
-</dl>
+ </td></tr>
+ <tr><th>Shift Group</th>
+ <td>No Change</td></tr>
+ <tr><th>Select Group</th>
+ <td>No Change</td></tr>
+ <tr><th>Transport Group</th>
+ <td>No Change</td></tr>
+</table>
<h3>Mixer Pan While Holding Shift 1</h3>
<p>
<img alt="Digramatic Image of the Mixer Mode while holding down shift 1"
<p>
The operations of various buttons change while holding down the <dfn>Shift 1</dfn> button
</p>
-<dl>
- <dt>Encoders</dt>
- <dd>No Change</dd>
- <dt>First row of buttons</dt>
- <dd>These now control the Soloing of each track/bus in the current bank</dd>
- <dt>Second row of buttons</dt>
- <dd>These now control the Enable Record for each track</dd>
- <dt>Faders</dt>
- <dd>No Change</dd>
- <dt>Shift Group</dt>
- <dd>No change</dd>
- <dt>Mode Group</dt>
- <dd>No Change</dd>
- <dt>Select Group</dt>
- <dd>
+<table class="dl">
+ <tr><th>Encoders</th>
+ <td>No Change</td></tr>
+ <tr><th>First row of buttons</th>
+ <td>These now control the Soloing of each track/bus in the current bank</td></tr>
+ <tr><th>Second row of buttons</th>
+ <td>These now control the Enable Record for each track</td></tr>
+ <tr><th>Faders</th>
+ <td>No Change</td></tr>
+ <tr><th>Shift Group</th>
+ <td>No change</td></tr>
+ <tr><th>Mode Group</th>
+ <td>No Change</td></tr>
+ <tr><th>Select Group</th>
+ <td>
These now change the current bank of tracks being controlled over by
one. So if you where controlling tracks 1-8 a push the right
button the surface would now control tracks 2-9 pressing the left
would then shift back to controlling tracks 1-8.
- </dd>
- <dt>Transport Group</dt>
- <dd>The upper left now controls turning on and off <dfn>Loop</dfn> mode.</dd>
- <dd>
+ </td></tr>
+ <tr><th>Transport Group</th>
+ <td>The upper left now controls turning on and off <dfn>Loop</dfn> mode.</td></tr>
+ <td>
The upper right now toggles
<dfn>Click</dfn>.
- </dd>
- <dd>The lower left toggles <dfn>Replace</dfn>.</dd>
- <dd>
+ </td></tr>
+ <td>The lower left toggles <dfn>Replace</dfn>.</td></tr>
+ <td>
The lower right toggles
<dfn>Global Record</dfn>.
- </dd>
-</dl>
+ </td></tr>
+</table>
<h3>Mixer Pan While Holding Shift 2</h3>
<p>
<img alt="Digramatic Image of the Mixer Mode while holding down shift 2"
<p>
The operations of various buttons change while holding down the <dfn>Shift 2</dfn> button
</p>
-<dl>
- <dt>Encoders</dt>
- <dd>No Change</dd>
- <dt>First row of buttons</dt>
- <dd>FIX ME</dd>
- <dt>Second row of buttons</dt>
- <dd>These now control setting up different <dfn>Views</dfn>. See below for more info</dd>
- <dt>Faders</dt>
- <dd>No Change</dd>
- <dt>Shift Group</dt>
- <dd>No change</dd>
- <dt>Mode Group</dt>
- <dd>No Change</dd>
- <dt>Select Group</dt>
- <dd>Left button controls <dfn>Undo</dfn>(NEEDS VERIFIED)</dd>
- <dt>Transport Group</dt>
- <dd>FIX ME</dd>
- <dd>FIX ME</dd>
- <dd>FIX ME</dd>
- <dd>FIX ME</dd>
-</dl>
+<table class="dl">
+ <tr><th>Encoders</th>
+ <td>No Change</td></tr>
+ <tr><th>First row of buttons</th>
+ <td>FIX ME</td></tr>
+ <tr><th>Second row of buttons</th>
+ <td>These now control setting up different <dfn>Views</dfn>. See below for more info</td></tr>
+ <tr><th>Faders</th>
+ <td>No Change</td></tr>
+ <tr><th>Shift Group</th>
+ <td>No change</td></tr>
+ <tr><th>Mode Group</th>
+ <td>No Change</td></tr>
+ <tr><th>Select Group</th>
+ <td>Left button controls <dfn>Undo</dfn>(NEEDS VERIFIED)</td></tr>
+ <tr><th>Transport Group</th>
+ <td>FIX ME</td></tr>
+ <td>FIX ME</td></tr>
+ <td>FIX ME</td></tr>
+ <td>FIX ME</td></tr>
+</table>
<h3>Views</h3>
<p>
<img alt="Digramatic Image of the LED display for different Views"
projects / ardour-manual / blobdiff