---------------------------------------------
-Virtual Jaguar v1.0.8 GCC/SDL release README
---------------------------------------------
+-------------------------------------------
+Virtual Jaguar v2.1.2 GCC/Qt release README
+-------------------------------------------
--------------
- DISCLAIMER -
consult the INSTALL file for more information about supported OS's and
software requirements.
-The use of this software is entirely at your own risk. We can't be held
-responsible for damage done to you hardware and/or software. This software
-requires the use of the Atari Jaguar (CD) boot ROM and/or Commercial ROM
-images. You may only use the ROM images if you own the cartridges itself. The
-use of Commercial ROMs without owning the original cartridge is illegal in
-most countries and could result in fines and/or legal actions.
+The use of this software is entirely at your own risk. While it won't rape
+your dog, it might do other nasty things. We can't be held responsible for
+damage done to your hardware and/or software. You may only use the ROM images
+if you own the cartridges itself. The use of commercial ROMs without owning the
+original cartridge is illegal in most countries and could result in fines
+and/or legal actions.
-This software is released under the GPL. For more information I direct you to
-the GPL.TXT. You may hack/change the code anyway you like. You may not
-commercially sell this software. If you make changes, release the source code
-to the public and send the changes you made to the original authors.
+The products, trademarks and/or brands used in these documents and/or
+sourcecode are owned by their respective companies and/or successors in
+interest.
+
+This software is released under the GPL v3 or later. For more information, read
+the GPLv3 file.
-The products and brands used in these documents and/or sourcecode are owned by
-their respective companies.
----------------------------------------------------------------
- IMPORTANT NOTE ABOUT JAGUAR FILE FORMATS--READ THIS OR ELSE! -
The second type, the .jag file, is a Jaguar Server executable. These files
contain header information that tells you where to load and run the file's
-executable code. Note that as of this writing (1/1/2004) that the GoodJag ROM
+executable code. Note that as of this writing (8/5/2005) that the GoodJag ROM
renaming tool by Cowering incorrectly renames Jaguar cartridge ROM dumps to
have a .jag extension (a better choice, and the one supported by Virtual
Jaguar, is .j64)--if you're trying to run a ROM image with a .jag extension on
The fourth type, the .bin file, is simply a Jaguar executable with no header.
Since these files contain no information about where they load and execute,
Virtual Jaguar does not support this file type. Go bug the author to release
-either a file with headers or a file in Alpine ROM format. Virtual Jaguar is
-not omniscient! ;)
+either a file with proper headers or a file in Alpine ROM format. Virtual
+Jaguar is not omniscient (yet)! ;)
There is a fifth type of file that is supported by Virtual Jaguar, the .j64
file, which is simply a 1, 2, or 4 Meg dump of a Jaguar cartridge ROM which
loads at $800000 in the Jaguar memory space.
------------------------------------
-- What is Virtual Jaguar GCC/SDL? -
------------------------------------
+
+----------------------------------
+- What is Virtual Jaguar GCC/Qt? -
+----------------------------------
Virtual Jaguar is software dedicated to emulating the Atari Jaguar hardware on
a standard PC. The software was originally developed by David Raingeard of
Potato Emulation [http://potato.emu-france.com] and was released under the GPL
-on 25 June 2003.
+on 25 June 2003.
-Virtual Jaguar GCC/SDL is not only a port of the MS Visual C++/SDL sourcecode
+Virtual Jaguar GCC/Qt is not just a port of the MS Visual C++/SDL sourcecode
but has also been extended and rewritten so that we can enjoy Atari Jaguar
-emulation on every platform which uses the GCC compiler and that can make use
-of the Simple Directmedia Layer library (SDL).
+emulation on every platform that has a GCC compiler and a port of Qt.
-Currently Virtual Jaguar GCC/SDL compiles on WIN32 using mingw, and several
-UN*X based systems (BeOS, Linux and FreeBSD). It may run on other systems
-as well but we can not guarantee that.
+Currently Virtual Jaguar GCC/Qt compiles on WIN32 using mingw, and several
+UN*X based systems (BeOS, Linux, FreeBSD and MacOS). It may run on other
+systems as well but we can not guarantee that.
The port was done by the SDLEMU crew (http://sdlemu.ngemu.com) and especially
by Niels Wagenaar and Carwin Jones. A major portion of the rewrite was done by
-James L. Hammons. You may contact us by e-mail (sdlemu@ngemu.com) or leave a
+James Hammons. You may contact us by e-mail (sdlemu@ngemu.com) or leave a
message on the SDLEMU Official Forum (see the website). Patches and bugfixes
are particularly welcome! :)
-More information about SDL can be found at http://www.libsdl.org.
-
---------------------------------
-- Using Virtual Jaguar GCC/SDL -
---------------------------------
-
-After compiling the binary (see INSTALL) you can now run original Atari Jaguar
-games. These games are distributed on cartridges and can therefore cannot be
-used on a PC (we're still waiting for that Jaguar-on-a-PCI-card that you plug
-into your late model PC, complete with cartridge slot ;-). To use these games
-on Virtual Jaguar GCC/SDL you need to get ROM images. Besides the ROM images
-from commercial games you must also obtain the Atari Jaguar (CD) boot ROM
-which you must copy to the BIOS directory. For legal issues concerning ROM
-images please consult the DISCLAIMER at the beginning of this file.
-
-After obtaining the Atari Jaguar (CD) boot ROM and several ROMs you can now
-use Virtual Jaguar using the following command:
-
-./vj [romfile] [-switches]
-
-The context of ROMFILE is the filename of the an Atari Jaguar ROM dump (can be
-either compressed or uncompressed). You can also use switches. By just typing
-./vj -? (or ./vj -help) you get an overview of the options you can use. WIN32
-users should look into the stdout.txt for that information.
-
-If you prefer a nice GUI instead of typing in command lines, you can either
-type ./vj or double click on the Virtual Jaguar executable. If you have a
-directory full of ROM files, you can tell Virtual Jaguar where they are by
-editing the appropriate line in the vj.cfg file (it assumes a ROMs directory
-under the directory where VJ lives) so that they show up when you pick the
-"Load" option from the "File" menu.
-
-This emulator also emulates the Atari Jaguar gamepads. By using the following
-keyboard or joystick settings you can (possibly) play a given game:
-
-Atari Button C : Z or joystick button 3
-Atari Button B : X or joystick button 2
-Atari Button A : C or joystick button 1
-Atari Buttons 1 - 10 : Keypad 0 - 9 (0 = 10)
-Atari Start/Pause : ENTER
-Atari Select : '
-Atari UP : UP or joystick UP
-Atari DOWN : DOWN or joystick DOWN
-Atari LEFT : LEFT or joystick LEFT
-Atari RIGHT : RIGHT or joystick RIGHT
-Atari # : Keypad /
-Atari * : Keypad *
-
-With ESC you can easily stop Virtual Jaguar GCC/SDL which will get you back to
-the GUI (pressing ESC again will take you back to the game). To exit VJ, you
-can either select File|Quit or press the "Q" key on your keyboard. If you want
-to change the key layout, simply edit the vj.cfg file and change the keys. :)
-NOTE: There are quite a few keys mapped to debugging functions at present. You
-have been warned!
-
--------------------
-- A note on sound -
--------------------
-
-By default, the Virtual Jaguar's DSP is turned off, since it doesn't work very
-well at present (it requires a lot of horsepower to sound decent at this
-point!). In order to hear any sound at all, you have to either edit the vj.cfg
-file and change the appropriate line or set the DSP on in the GUI (found under
-Settings|Misc). One word of caution: Use the old DSP core instead of the new
-pipelined version for now--the new pipelined DSP core has not yet been
-optimized and runs quite slow at present! Once the DSP issues have been ironed
-out, it will be turned on by default and you won't have to deal with it
-anymore. ;)
+More information about the incredible SDL libraries can be found at
+http://www.libsdl.org. Thanks Sam--you rock! :)
+
+
+-------------------------------
+- Using Virtual Jaguar GCC/Qt -
+-------------------------------
+
+Simply double click on the Virtual Jaguar icon or type ./virtualjaguar -h from
+the command line. See the built in help (under Help|Contents) for more
+information on how to use it. :-)
+
-----------
- Finally -
-----------
If you find bugs, enhance the code or simply have questions, drop us an e-mail
-at sdlemu AT ngemu DOT com or drop a message on the SDLEMU Official Forum.
+at sdlemu AT ngemu DOT com or drop a message on the SDLEMU Official Forum.
More information about this project (releases/WIP) can be found at the official
Virtual Jaguar website [http://www.icculus.org/virtualjaguar] and on the SDLEMU
website [http://sdlemu.ngemu.com].
-We hope you enjoy the emulator and will use it wisely!
+We hope you enjoy the emulator and will use it wisely!
-Special thanks go to guys over at ngemu.com and #ngemu (EFNET). Thanks also to
-David Raingeard of Potato Emulation who originally developed this emulator and
+Thanks go to guys over at ngemu.com and #ngemu (EFNET). Thanks also to David
+Raingeard of Potato Emulation who originally developed this emulator and
released the sources to the public. We couldn't have done it without you!
+Special thanks go to everyone who submitted good, detailed bug reports,
+sometimes with demonstration code(!); your help has helped to make Virtual
+Jaguar better, more accurate, and more polished than it would be otherwise. We
+really appreciate your help!
+
SDLEMU
projects / virtualjaguar / blobdiff