#
# NOTE: zlib and OpenGL libs are a dependency, but are not checked for.
-# same goes for libcdio
+# same goes for libcdio, Qt
# Figure out which system we're compiling for, and set the appropriate variables
-ifeq "$(OSTYPE)" "msys" # Win32
+OSTYPE := $(shell uname -a)
-SYSTYPE = __GCCWIN32__
-EXESUFFIX = .exe
-GLLIB = -lopengl32
-ICON = obj/icon.o
-SDLLIBTYPE = --libs
-MSG = Win32 on MinGW
+ifeq "$(findstring Msys,$(OSTYPE))" "Msys" # Win32
-else
-#ifeq "$(OSTYPE)" "darwin"
-ifeq "darwin" "$(findstring darwin,$(OSTYPE))" # Should catch both 'darwin' and 'darwin7.0'
+SYSTYPE := __GCCWIN32__
+EXESUFFIX := .exe
+GLLIB := -lopengl32
+ICON := obj/icon.o
+SDLLIBTYPE := --libs
+MSG := Win32 on MinGW
+
+else ifeq "$(findstring Darwin,$(OSTYPE))" "Darwin" # Should catch both 'darwin' and 'darwin7.0'
+
+SYSTYPE := __GCCUNIX__ -D_OSX_
+EXESUFFIX :=
+GLLIB :=
+ICON :=
+SDLLIBTYPE := --static-libs
+MSG := Mac OS X
-SYSTYPE = __GCCUNIX__ -D_OSX_
-EXESUFFIX =
-GLLIB =
-ICON =
-SDLLIBTYPE = --static-libs
-MSG = Mac OS X
+else ifeq "$(findstring Linux,$(OSTYPE))" "Linux" # Linux
+
+SYSTYPE := __GCCUNIX__
+EXESUFFIX :=
+GLLIB := -lGL -lGLU
+ICON :=
+SDLLIBTYPE := --libs
+MSG := GNU/Linux
else # *nix
-SYSTYPE = __GCCUNIX__
-EXESUFFIX =
-GLLIB = -lGL -lGLU
-ICON =
-SDLLIBTYPE = --libs
-MSG = generic Unix/Linux
+$(error OS TYPE UNDETECTED)
endif
+
+# Set vars for libcdio
+ifneq "$(shell pkg-config --silence-errors --libs libcdio)" ""
+HAVECDIO := -DHAVE_LIB_CDIO
+CDIOLIB := -lcdio
+else
+HAVECDIO :=
+CDIOLIB :=
endif
-CC = gcc
-LD = gcc
-TARGET = virtualjaguar
+CC := gcc
+LD := gcc
+TARGET := virtualjaguar
# Note that we use optimization level 2 instead of 3--3 doesn't seem to gain much over 2
-CFLAGS = -MMD -Wall -Wno-switch -O2 -D$(SYSTYPE) -ffast-math -fomit-frame-pointer `sdl-config --cflags`
-CPPFLAGS = -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) -Wno-trigraphs \
- -DHAVE_LIB_CDIO -ffast-math -fomit-frame-pointer `sdl-config --cflags` -g
+CFLAGS := -MMD -Wall -Wno-switch -O2 -D$(SYSTYPE) -ffast-math -fomit-frame-pointer `sdl-config --cflags`
+CPPFLAGS := -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) -Wno-trigraphs \
+ $(HAVECDIO) -ffast-math -fomit-frame-pointer `sdl-config --cflags` -g
# -fomit-frame-pointer `sdl-config --cflags` -g
# -fomit-frame-pointer `sdl-config --cflags` -DLOG_UNMAPPED_MEMORY_ACCESSES
-LDFLAGS =
+LDFLAGS :=
-LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) -lcdio `pkg-config --libs QtGui QtOpenGL`
-# Comment out the above and uncomment below if you don't have libcdio.
-# Also, remove the "-DHAVE_LIB_CDIO" from CPPFLAGS above.
-#LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB)
+LIBS := -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) $(CDIOLIB) `pkg-config --libs QtGui QtOpenGL`
-INCS = -I. -I./src -I./src/gui -I/usr/local/include -I/usr/include
+INCS := -I. -I./src -I./src/gui -I/usr/local/include -I/usr/include
-OBJS = \
+OBJS := \
obj/m68kcpu.o \
obj/m68kops.o \
obj/m68kopac.o \
obj/wavetable.o \
$(ICON)
-all: checkenv message obj $(TARGET)$(EXESUFFIX)
+# Targets for convenience sake, not "real" targets
+.PHONY: clean
+
+all: checkenv message2 obj $(TARGET)$(EXESUFFIX)
@echo
@echo -e "\033[01;33m***\033[00;32m Looks like it compiled OK... Give it a whirl!\033[00m"
# Check the compilation environment, barf if not appropriate
-checkenv:
- @echo
- @echo -en "\033[01;33m***\033[00;32m Checking compilation environment... \033[00m"
-ifeq "" "$(shell which sdl-config)"
- @echo
+checkenv: msg-check-env check-sdl check-zlib check-cdio check-gl check-qt ;
+
+#check-sdl: msg-ck-sdl $(if $(strip ),,msg-no-sdl stop-on-error)
+check-sdl: msg-ck-sdl $(if $(shell which sdl-config),,msg-no-sdl stop-on-error)
+ @echo -e "\033[01;37mOK\033[00m"
+
+msg-ck-sdl:
+ @echo -en " \033[00;32mSDL... \033[00m"
+
+msg-no-sdl:
+ @echo -e "\033[01;37mNOT FOUND\033[00m"
@echo
@echo -e "\033[01;33mIt seems that you don't have the SDL development libraries installed. If you"
@echo -e "have installed them, make sure that the sdl-config file is somewhere in your"
@echo -e "path and is executable.\033[00m"
@echo
-#Is there a better way to break out of the makefile?
- @breaky
-else
+
+check-zlib: msg-ck-zlib $(if $(shell pkg-config --silence-errors --libs zlib),,msg-no-zlib stop-on-error)
@echo -e "\033[01;37mOK\033[00m"
-endif
-# !!! NOTE !!! Need to put a check here for libcdio, GL, zlib, Qt
-message:
+msg-ck-zlib:
+ @echo -en " \033[00;32mZLIB... \033[00m"
+
+msg-no-zlib:
+ @echo -e "\033[01;37mNOT FOUND\033[00m"
+ @echo
+ @echo -e "\033[01;33mIt seems that you don't have ZLIB installed. If you have installed it, make"
+ @echo -e "sure that the pkg-config file is somewhere in your path and is executable.\033[00m"
+ @echo
+
+#NOTE that this check shouldn't be fatal, we can bounce back from it by excluding CD support
+check-cdio: msg-ck-cdio $(if $(CDIOLIB),msg-cdio,msg-no-cdio) ;
+
+msg-ck-cdio:
+ @echo -en " \033[00;32mLIBCDIO... \033[00m"
+
+msg-cdio:
+ @echo -e "\033[01;37mOK\033[00m"
+
+msg-no-cdio:
+ @echo -e "\033[01;37mNOT FOUND\033[00m"
+ @echo
+ @echo -e "\033[01;33mIt seems that you don't have LIBCDIO installed. Since this is not fatal,"
+ @echo -e "Virtual Jaguar will be built WITHOUT CD support.\033[00m"
+ @echo
+
+check-gl: msg-ck-gl
+ @echo -e "*** GL CHECK NOT IMPLEMENTED ***"
+
+msg-ck-gl:
+ @echo -en " \033[00;32mOpenGL... \033[00m"
+
+check-qt: msg-ck-qt
+ @echo -e "*** QT CHECK NOT IMPLEMENTED ***"
+
+msg-ck-qt:
+ @echo -en " \033[00;32mQt... \033[00m"
+
+stop-on-error: ; $(error COMPILATION ENVIRONMENT)
+
+msg-check-env:
+ @echo
+ @echo -e "\033[01;33m***\033[00;32m Checking compilation environment: \033[00m"
+ @echo
+
+message2:
@echo
@echo -e "\033[01;33m***\033[00;32m Building Virtual Jaguar for $(MSG)...\033[00m"
@echo
@windres -i res/$(TARGET).rc -o $(ICON) --include-dir=./res
endif
-# Main source compilation...
+# Main source compilation (implicit rules)...
obj/%.o: src/%.c
@echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
#QT_DEFINES = -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED
QT_DEFINES = -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED
#QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src/gui -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4 -I./obj
-QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4 -I/usr/X11R6/include -I./obj
+QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4 -I/usr/X11R6/include -I./obj `sdl-config --cflags`
QT_CXXFLAGS = -MMD -pipe -O2 -march=pentium-m -pipe -D_REENTRANT -Wall -W $(QT_DEFINES) -D$(SYSTYPE) -g
obj/moc_%.cpp: src/gui/%.h
@$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
obj/qrc_virtualjaguar.cpp: src/gui/virtualjaguar.qrc res/vj.xpm
- @echo -e "\033[01;33m***\033[00;32m Creating qrc_vj.cpp...\033[00m"
+ @echo -e "\033[01;33m***\033[00;32m Creating qrc_virtualjaguar.cpp...\033[00m"
@/usr/bin/rcc -name virtualjaguar src/gui/virtualjaguar.qrc -o obj/qrc_virtualjaguar.cpp
obj/qrc_%.o: obj/qrc_%.cpp
projects / virtualjaguar / blobdiff