#
# Unified Makefile for Virtual Jaguar GCC/SDL Portable Jaguar Emulator
#
-# Note that SYSTYPE, EXESUFFIX, GLLIB, ICON, and SDLLIBTYPE are passed in by the
-# script called "compile". The unified makefile should make life a little
-# easier for the maintainers. :-)
+# by James L. Hammons
#
+# This software is licensed under the GPL v2 or any later version. Set the
+# file GPL.TXT for details. ;-)
+#
+
+# NOTE: zlib and OpenGL libs are a dependency, but are not checked for.
+# same goes for libcdio
+
+# Figure out which system we're compiling for, and set the appropriate variables
+
+ifeq "$(OSTYPE)" "msys" # Win32
+
+SYSTYPE = __GCCWIN32__
+EXESUFFIX = .exe
+GLLIB = -lopengl32
+ICON = obj/icon.o
+SDLLIBTYPE = --libs
+MSG = Win32 on MinGW
+
+else
+#ifeq "$(OSTYPE)" "darwin"
+ifeq "darwin" "$(findstring darwin,$(OSTYPE))" # Should catch both 'darwin' and 'darwin7.0'
+
+SYSTYPE = __GCCUNIX__ -D_OSX_
+EXESUFFIX =
+GLLIB =
+ICON =
+SDLLIBTYPE = --static-libs
+MSG = Mac OS X
+
+else # *nix
+
+SYSTYPE = __GCCUNIX__
+EXESUFFIX =
+GLLIB = -lGL
+ICON =
+SDLLIBTYPE = --libs
+MSG = generic Unix/Linux
+
+endif
+endif
CC = gcc
LD = gcc
-TARGET = vj$(EXESUFFIX)
+TARGET = vj
# Note that we use optimization level 2 instead of 3--3 doesn't seem to gain much over 2
-CFLAGS = -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) \
- -fomit-frame-pointer `sdl-config --cflags`
+CFLAGS = -MMD -Wall -Wno-switch -O2 -D$(SYSTYPE) -ffast-math -fomit-frame-pointer `sdl-config --cflags`
+CPPFLAGS = -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) \
+ -DHAVE_LIB_CDIO -ffast-math -fomit-frame-pointer `sdl-config --cflags` -g
# -fomit-frame-pointer `sdl-config --cflags` -g
# -fomit-frame-pointer `sdl-config --cflags` -DLOG_UNMAPPED_MEMORY_ACCESSES
LDFLAGS =
-LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB)
+LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) -lcdio
+# Comment out the above and uncomment below if you don't have libcdio.
+# Also, remove the "-DHAVE_LIB_CDIO" from CPPFLAGS above.
+#LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB)
-INCS = -I. -Isrc -Isrc/include -I/usr/local/include -I/usr/include
-
-THECC = $(CC) $(CFLAGS) $(INCS)
+INCS = -I. -I./src -I./src/gui -I/usr/local/include -I/usr/include
OBJS = \
- obj/anajoy.o \
- obj/blitter.o \
- obj/cdbios.o \
- obj/cdi.o \
- obj/cdrom.o \
- obj/clock.o \
- obj/crc32.o \
- obj/dac.o \
- obj/dsp.o \
- obj/eeprom.o \
- obj/gpu.o \
- obj/gui.o \
- obj/jagdasm.o \
- obj/jaguar.o \
- obj/jerry.o \
- obj/joystick.o \
- obj/log.o \
- obj/m68kcpu.o obj/m68kops.o obj/m68kopac.o obj/m68kopdm.o obj/m68kopnz.o \
- obj/m68kdasm.o \
- obj/memory.o \
- obj/objectp.o \
+ obj/m68kcpu.o \
+ obj/m68kops.o \
+ obj/m68kopac.o \
+ obj/m68kopdm.o \
+ obj/m68kopnz.o \
+ obj/m68kdasm.o \
+\
+ obj/gui.o \
+\
+ obj/blitter.o \
+ obj/cdrom.o \
+ obj/cdintf.o \
+ obj/crc32.o \
+ obj/dac.o \
+ obj/dsp.o \
+ obj/eeprom.o \
+ obj/event.o \
+ obj/file.o \
+ obj/gpu.o \
+ obj/jagdasm.o \
+ obj/jaguar.o \
+ obj/jerry.o \
+ obj/joystick.o \
+ obj/log.o \
+ obj/memory.o \
+ obj/objectp.o \
obj/sdlemu_config.o \
obj/sdlemu_opengl.o \
- obj/settings.o \
- obj/tom.o \
- obj/unzip.o \
- obj/version.o \
- obj/video.o \
- obj/vj.o \
+ obj/settings.o \
+ obj/tom.o \
+ obj/unzip.o \
+ obj/video.o \
+ obj/vj.o \
$(ICON)
-all: obj $(TARGET)
+all: checkenv message obj $(TARGET)$(EXESUFFIX)
+ @echo
+ @echo "*** Looks like it compiled OK... Give it a whirl!"
+
+# Check the compilation environment, barf if not appropriate
+
+checkenv:
+ @echo
+ @echo -n "*** Checking compilation environment... "
+ifeq "" "$(shell which sdl-config)"
+ @echo
+ @echo
+ @echo "It seems that you don't have the SDL development libraries installed. If you"
+ @echo "have installed them, make sure that the sdl-config file is somewhere in your"
+ @echo "path and is executable."
+ @echo
+#Is there a better way to break out of the makefile?
+ @break
+else
+ @echo "OK"
+endif
+# !!! NOTE !!! Need to put a check here for libcdio, GL, etc.
+
+message:
+ @echo
+ @echo "*** Building Virtual Jaguar for $(MSG)..."
+ @echo
clean:
- rm -rf obj
- rm -f ./vj$(EXESUFFIX)
+ @echo -n "*** Cleaning out the garbage..."
+ @rm -rf obj
+ @rm -f ./$(TARGET)$(EXESUFFIX)
+ @echo done!
obj:
- mkdir obj
+ @mkdir obj
-obj/%.o: src/%.c src/include/%.h
- $(THECC) -c $< -o $@
+# This is only done for Win32 at the moment...
-obj/%.o: src/%.cpp src/include/%.h
- $(THECC) -c $< -o $@
+ifneq "" "$(ICON)"
+$(ICON): res/$(TARGET).rc res/$(TARGET).ico
+ @echo \*\*\* Processing icon...
+ @windres -i res/$(TARGET).rc -o $(ICON) --include-dir=./res
+endif
obj/%.o: src/%.c
- $(THECC) -c $< -o $@
+ @echo "*** Compiling $<..."
+ @$(CC) $(CFLAGS) $(INCS) -c $< -o $@
obj/%.o: src/%.cpp
- $(THECC) -c $< -o $@
+ @echo "*** Compiling $<..."
+ @$(CC) $(CPPFLAGS) $(INCS) -c $< -o $@
+
+obj/%.o: src/gui/%.cpp
+ @echo "*** Compiling $<..."
+ @$(CC) $(CPPFLAGS) $(INCS) -c $< -o $@
-$(TARGET): $(OBJS)
- $(LD) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
+$(TARGET)$(EXESUFFIX): $(OBJS)
+ @echo "*** Linking it all together..."
+ @$(LD) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
# strip --strip-all vj$(EXESUFFIX)
# upx -9 vj$(EXESUFFIX)
-# Other stuff that has unusual dependencies
+# Pull in dependencies autogenerated by gcc's -MMD switch
+# The "-" in front is there just in case they haven't been created yet
-obj/gui.o: src/gui.cpp src/include/gui.h src/include/font1.h
- $(THECC) -c src/gui.cpp -o obj/gui.o
+-include obj/*.d
#
# Musashi specific stuffola
#
+#obj/m68k%.o: obj/m68k%.c obj/m68kops.h
+# $(CC) $(CFLAGS) -Iobj -c src/m68k%.c -o obj/m68k%.o
+
+#obj/m68k%.o: obj/m68k%.c obj/m68kmake$(EXESUFFIX)
+# $(CC) $(CFLAGS) -Iobj -c src/m68k%.c -o obj/m68k%.o
+
+#see if you can collapse all this crap into one or two lines...
+#NOTE: The above doesn't work for some reason...
+
obj/m68kcpu.o: obj/m68kops.h src/m68k.h src/m68kconf.h
- $(CC) $(CFLAGS) -Iobj -c src/m68kcpu.c -o obj/m68kcpu.o
+ @echo "*** Compiling m68kcpu.c..."
+ @$(CC) $(CFLAGS) -Iobj -c src/m68kcpu.c -o obj/m68kcpu.o
obj/m68kops.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kops.c src/m68k.h src/m68kconf.h
- $(CC) $(CFLAGS) -Isrc -c obj/m68kops.c -o obj/m68kops.o
+ @echo "*** Compiling m68kops.c..."
+ @$(CC) $(CFLAGS) -Isrc -c obj/m68kops.c -o obj/m68kops.o
obj/m68kopac.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopac.c src/m68k.h src/m68kconf.h
- $(CC) $(CFLAGS) -Isrc -c obj/m68kopac.c -o obj/m68kopac.o
+ @echo "*** Compiling m68kopac.c..."
+ @$(CC) $(CFLAGS) -Isrc -c obj/m68kopac.c -o obj/m68kopac.o
obj/m68kopdm.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopdm.c src/m68k.h src/m68kconf.h
- $(CC) $(CFLAGS) -Isrc -c obj/m68kopdm.c -o obj/m68kopdm.o
+ @echo "*** Compiling m68kopdm.c..."
+ @$(CC) $(CFLAGS) -Isrc -c obj/m68kopdm.c -o obj/m68kopdm.o
obj/m68kopnz.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopnz.c src/m68k.h src/m68kconf.h
- $(CC) $(CFLAGS) -Isrc -c obj/m68kopnz.c -o obj/m68kopnz.o
+ @echo "*** Compiling m68kopnz.c..."
+ @$(CC) $(CFLAGS) -Isrc -c obj/m68kopnz.c -o obj/m68kopnz.o
obj/m68kdasm.o: src/m68kdasm.c src/m68k.h src/m68kconf.h
- $(CC) $(CFLAGS) -Isrc -c src/m68kdasm.c -o obj/m68kdasm.o
+ @echo "*** Compiling m68kdasm.c..."
+ @$(CC) $(CFLAGS) -Isrc -c src/m68kdasm.c -o obj/m68kdasm.o
obj/m68kops.h: obj/m68kmake$(EXESUFFIX)
- obj/m68kmake obj src/m68k_in.c
+ @obj/m68kmake obj src/m68k_in.c
obj/m68kmake$(EXESUFFIX): src/m68kmake.c src/m68k_in.c
- $(CC) $(WARNINGS) src/m68kmake.c -o obj/m68kmake$(EXESUFFIX)
+ @echo "*** Preparing to make the Musashi core..."
+ @$(CC) $(WARNINGS) src/m68kmake.c -o obj/m68kmake$(EXESUFFIX)
projects / virtualjaguar / blobdiff