#
# by James L. Hammons
#
-# This software is licensed under the GPL v2 or any later version. Set the
+# This software is licensed under the GPL v2 or any later version. See the
# file GPL.TXT for details. ;-)
#
SYSTYPE = __GCCUNIX__
EXESUFFIX =
-GLLIB = -lGL
+GLLIB = -lGL -lGLU
ICON =
SDLLIBTYPE = --libs
MSG = generic Unix/Linux
# Note that we use optimization level 2 instead of 3--3 doesn't seem to gain much over 2
CFLAGS = -MMD -Wall -Wno-switch -O2 -D$(SYSTYPE) -ffast-math -fomit-frame-pointer `sdl-config --cflags`
-CPPFLAGS = -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) \
- -ffast-math -fomit-frame-pointer `sdl-config --cflags`
+CPPFLAGS = -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) -Wno-trigraphs \
+ -DHAVE_LIB_CDIO -ffast-math -fomit-frame-pointer `sdl-config --cflags` -g
# -fomit-frame-pointer `sdl-config --cflags` -g
# -fomit-frame-pointer `sdl-config --cflags` -DLOG_UNMAPPED_MEMORY_ACCESSES
LDFLAGS =
-LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) -lcdio
+LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) -lcdio `pkg-config --libs QtGui QtOpenGL`
+# Comment out the above and uncomment below if you don't have libcdio.
+# Also, remove the "-DHAVE_LIB_CDIO" from CPPFLAGS above.
+#LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB)
-INCS = -I. -I./src -I/usr/local/include -I/usr/include
+INCS = -I. -I./src -I./src/gui -I/usr/local/include -I/usr/include
OBJS = \
+ obj/m68kcpu.o \
+ obj/m68kops.o \
+ obj/m68kopac.o \
+ obj/m68kopdm.o \
+ obj/m68kopnz.o \
+ obj/m68kdasm.o \
+\
+ obj/about.o \
+ obj/app.o \
+ obj/configwin.o \
+ obj/filepicker.o \
+ obj/filethread.o \
+ obj/mainwin.o \
+ obj/moc_mainwin.o \
+ obj/glwidget.o \
+ obj/moc_glwidget.o \
+ obj/qrc_vj.o \
+\
obj/blitter.o \
obj/cdrom.o \
obj/cdintf.o \
- obj/clock.o \
obj/crc32.o \
obj/dac.o \
obj/dsp.o \
obj/eeprom.o \
+ obj/event.o \
+ obj/file.o \
obj/gpu.o \
- obj/gui.o \
obj/jagdasm.o \
obj/jaguar.o \
obj/jerry.o \
obj/joystick.o \
obj/log.o \
- obj/m68kcpu.o \
- obj/m68kops.o \
- obj/m68kopac.o \
- obj/m68kopdm.o \
- obj/m68kopnz.o \
- obj/m68kdasm.o \
obj/memory.o \
+ obj/mmu.o \
obj/objectp.o \
obj/sdlemu_config.o \
obj/sdlemu_opengl.o \
obj/settings.o \
+ obj/state.o \
obj/tom.o \
obj/unzip.o \
- obj/version.o \
obj/video.o \
obj/vj.o \
+ obj/wavetable.o \
$(ICON)
all: checkenv message obj $(TARGET)$(EXESUFFIX)
@echo
- @echo "*** Looks like it compiled OK... Give it a whirl!"
+ @echo -e "\033[01;33m***\033[00;32m Looks like it compiled OK... Give it a whirl!\033[00m"
# Check the compilation environment, barf if not appropriate
checkenv:
@echo
- @echo -n "*** Checking compilation environment... "
+ @echo -en "\033[01;33m***\033[00;32m Checking compilation environment... \033[00m"
ifeq "" "$(shell which sdl-config)"
@echo
@echo
- @echo "It seems that you don't have the SDL development libraries installed. If you"
- @echo "have installed them, make sure that the sdl-config file is somewhere in your"
- @echo "path and is executable."
+ @echo -e "\033[01;33mIt seems that you don't have the SDL development libraries installed. If you"
+ @echo -e "have installed them, make sure that the sdl-config file is somewhere in your"
+ @echo -e "path and is executable.\033[00m"
@echo
#Is there a better way to break out of the makefile?
- @break
+ @breaky
else
- @echo "OK"
+ @echo -e "\033[01;37mOK\033[00m"
endif
+# !!! NOTE !!! Need to put a check here for libcdio, GL, zlib, Qt
message:
@echo
- @echo "*** Building Virtual Jaguar for $(MSG)..."
+ @echo -e "\033[01;33m***\033[00;32m Building Virtual Jaguar for $(MSG)...\033[00m"
@echo
clean:
- @echo -n "*** Cleaning out the garbage..."
+ @echo
+ @echo -en "\033[01;33m***\033[00;32m Cleaning out the garbage...\033[00m"
@rm -rf obj
@rm -f ./$(TARGET)$(EXESUFFIX)
- @echo done!
+ @echo -e "\033[01;37mdone!\033[00m"
obj:
@mkdir obj
ifneq "" "$(ICON)"
$(ICON): res/$(TARGET).rc res/$(TARGET).ico
- @echo \*\*\* Processing icon...
+ @echo -e "\033[01;33m***\033[00;32m Processing icon...\033[00m"
@windres -i res/$(TARGET).rc -o $(ICON) --include-dir=./res
endif
+# Main source compilation...
+
obj/%.o: src/%.c
- @echo "*** Compiling $<..."
+ @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
@$(CC) $(CFLAGS) $(INCS) -c $< -o $@
obj/%.o: src/%.cpp
- @echo "*** Compiling $<..."
+ @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
@$(CC) $(CPPFLAGS) $(INCS) -c $< -o $@
+#$(TARGET)$(EXESUFFIX): $(OBJS)
$(TARGET)$(EXESUFFIX): $(OBJS)
- @echo "*** Linking it all together..."
+ @echo -e "\033[01;33m***\033[00;32m Linking it all together...\033[00m"
@$(LD) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
# strip --strip-all vj$(EXESUFFIX)
# upx -9 vj$(EXESUFFIX)
-# Pull in dependencies autogenerated by gcc's -MMD switch
-# The "-" in front is there just in case they haven't been created yet
-
--include obj/*.d
+# Qt GUI stuff...
+
+src/gui/Makefile: src/gui/vj-gui.pro src/gui/vj-gui.qrc
+ @echo -e "\033[01;33m***\033[00;32m Creating Qt Makefile...\033[00m"
+ @qmake -o src/gui/Makefile src/gui/vj-gui.pro
+
+#obj/%.o: src/gui/%.cpp src/gui/Makefile
+# @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
+# @make -C src/gui
+#OR:
+# @cd src/gui && make
+
+#QT_SOURCES = app.cpp \
+# mainwin.cpp ../../obj/moc_mainwin.cpp \
+# ../../obj/qrc_vj-gui.cpp
+#QT_OBJECTS = ../../obj/app.o \
+# ../../obj/mainwin.o \
+# ../../obj/moc_mainwin.o \
+# ../../obj/qrc_vj-gui.o
+QT_CFLAGS = -MMD `pkg-config --cflags QtGui`
+# !!! THESE DEFINES ARE PLATFORM DEPENDENT !!!
+#QT_DEFINES = -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED
+QT_DEFINES = -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED
+#QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src/gui -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4 -I./obj
+QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4 -I/usr/X11R6/include -I./obj
+QT_CXXFLAGS = -MMD -pipe -O2 -march=pentium-m -pipe -D_REENTRANT -Wall -W $(QT_DEFINES) -D$(SYSTYPE)
+
+obj/moc_%.cpp: src/gui/%.h
+ @echo -e "\033[01;33m***\033[00;32m Creating $@...\033[00m"
+ @/usr/bin/moc $(QT_DEFINES) $(QT_INCPATH) $< -o $@
+
+obj/moc_%.o: obj/moc_%.cpp
+ @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
+ @$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
+
+obj/qrc_vj.cpp: src/gui/vj.qrc res/vj.xpm
+ @echo -e "\033[01;33m***\033[00;32m Creating qrc_vj.cpp...\033[00m"
+ @/usr/bin/rcc -name vj src/gui/vj.qrc -o obj/qrc_vj.cpp
+
+obj/qrc_%.o: obj/qrc_%.cpp
+ @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
+ @$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
+
+obj/%.o: src/gui/%.cpp src/gui/%.h
+ @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
+ @$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
#
# Musashi specific stuffola
#
-#obj/m68k%.o: obj/m68k%.c obj/m68kops.h
-# $(CC) $(CFLAGS) -Iobj -c src/m68k%.c -o obj/m68k%.o
-
-#obj/m68k%.o: obj/m68k%.c obj/m68kmake$(EXESUFFIX)
-# $(CC) $(CFLAGS) -Iobj -c src/m68k%.c -o obj/m68k%.o
+obj/m68kmake$(EXESUFFIX): src/m68kmake.c src/m68k_in.c
+ @echo -e "\033[01;33m***\033[00;32m Preparing to make the Musashi core...\033[00m"
+ @$(CC) $(WARNINGS) src/m68kmake.c -o obj/m68kmake$(EXESUFFIX)
-#see if you can collapse all this crap into one or two lines...
-#NOTE: The above doesn't work for some reason...
+obj/m68kops.h obj/m68kops.c obj/m68kopac.c obj/m68kopdm.c obj/m68kopnz.c: obj/m68kmake$(EXESUFFIX)
+ @echo -e "\033[01;33m***\033[00;32m Creating m68kops.h...\033[00m"
+ @obj/m68kmake obj src/m68k_in.c
obj/m68kcpu.o: obj/m68kops.h src/m68k.h src/m68kconf.h
- @echo "*** Compiling m68kcpu.c..."
+ @echo -e "\033[01;33m***\033[00;32m Compiling m68kcpu.c...\033[00m"
@$(CC) $(CFLAGS) -Iobj -c src/m68kcpu.c -o obj/m68kcpu.o
-obj/m68kops.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kops.c src/m68k.h src/m68kconf.h
- @echo "*** Compiling m68kops.c..."
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kops.c -o obj/m68kops.o
-
-obj/m68kopac.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopac.c src/m68k.h src/m68kconf.h
- @echo "*** Compiling m68kopac.c..."
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kopac.c -o obj/m68kopac.o
-
-obj/m68kopdm.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopdm.c src/m68k.h src/m68kconf.h
- @echo "*** Compiling m68kopdm.c..."
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kopdm.c -o obj/m68kopdm.o
+obj/m68kop%.o: obj/m68kop%.c
+ @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
+ @$(CC) $(CFLAGS) -Isrc -c $< -o $@
-obj/m68kopnz.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopnz.c src/m68k.h src/m68kconf.h
- @echo "*** Compiling m68kopnz.c..."
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kopnz.c -o obj/m68kopnz.o
-
-obj/m68kdasm.o: src/m68kdasm.c src/m68k.h src/m68kconf.h
- @echo "*** Compiling m68kdasm.c..."
- @$(CC) $(CFLAGS) -Isrc -c src/m68kdasm.c -o obj/m68kdasm.o
-
-obj/m68kops.h: obj/m68kmake$(EXESUFFIX)
- @obj/m68kmake obj src/m68k_in.c
+# Pull in dependencies autogenerated by gcc's -MMD switch
+# The "-" in front is there just in case they haven't been created yet
-obj/m68kmake$(EXESUFFIX): src/m68kmake.c src/m68k_in.c
- @echo "*** Preparing to make the Musashi core..."
- @$(CC) $(WARNINGS) src/m68kmake.c -o obj/m68kmake$(EXESUFFIX)
+-include obj/*.d
projects / virtualjaguar / blobdiff