+# Makefile for Virtual Jaguar
#
-# Unified Makefile for Virtual Jaguar GCC/SDL Portable Jaguar Emulator
+# by James Hammons
+# (C) 2011 Underground Software
#
-# by James L. Hammons
+# Note that we control the version information here--uncomment only one set of
+# echo's from the "prepare" recipe. :-)
#
-# This software is licensed under the GPL v2 or any later version. Set the
-# file GPL.TXT for details. ;-)
-#
-
-# NOTE: zlib and OpenGL libs are a dependency, but are not checked for.
-# same goes for libcdio
-
-# Figure out which system we're compiling for, and set the appropriate variables
-
-ifeq "$(OSTYPE)" "msys" # Win32
-SYSTYPE = __GCCWIN32__
-EXESUFFIX = .exe
-GLLIB = -lopengl32
-ICON = obj/icon.o
-SDLLIBTYPE = --libs
-MSG = Win32 on MinGW
+FIND = find
+ifeq ("$(V)","1")
+Q :=
else
-#ifeq "$(OSTYPE)" "darwin"
-ifeq "darwin" "$(findstring darwin,$(OSTYPE))" # Should catch both 'darwin' and 'darwin7.0'
-
-SYSTYPE = __GCCUNIX__ -D_OSX_
-EXESUFFIX =
-GLLIB =
-ICON =
-SDLLIBTYPE = --static-libs
-MSG = Mac OS X
-
-else # *nix
-
-SYSTYPE = __GCCUNIX__
-EXESUFFIX =
-GLLIB = -lGL
-ICON =
-SDLLIBTYPE = --libs
-MSG = generic Unix/Linux
-
-endif
-endif
-
-CC = gcc
-LD = gcc
-TARGET = vj
-
-# Note that we use optimization level 2 instead of 3--3 doesn't seem to gain much over 2
-CFLAGS = -MMD -Wall -Wno-switch -O2 -D$(SYSTYPE) -ffast-math -fomit-frame-pointer `sdl-config --cflags`
-CPPFLAGS = -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) \
- -DHAVE_LIB_CDIO -ffast-math -fomit-frame-pointer `sdl-config --cflags` -g
-# -fomit-frame-pointer `sdl-config --cflags` -g
-# -fomit-frame-pointer `sdl-config --cflags` -DLOG_UNMAPPED_MEMORY_ACCESSES
-
-LDFLAGS =
-
-LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) -lcdio
-# Comment out the above and uncomment below if you don't have libcdio.
-# Also, remove the "-DHAVE_LIB_CDIO" from CPPFLAGS above.
-#LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB)
-
-INCS = -I. -I./src -I./src/gui -I/usr/local/include -I/usr/include
-
-OBJS = \
- obj/m68kcpu.o \
- obj/m68kops.o \
- obj/m68kopac.o \
- obj/m68kopdm.o \
- obj/m68kopnz.o \
- obj/m68kdasm.o \
-\
- obj/button.o \
- obj/element.o \
- obj/filelist.o \
- obj/gui.o \
- obj/guimisc.o \
- obj/image.o \
- obj/listbox.o \
- obj/menu.o \
- obj/pushbutton.o \
- obj/slideswitch.o \
- obj/text.o \
- obj/textedit.o \
- obj/window.o \
-\
- obj/blitter.o \
- obj/cdrom.o \
- obj/cdintf.o \
- obj/crc32.o \
- obj/dac.o \
- obj/dsp.o \
- obj/eeprom.o \
- obj/event.o \
- obj/file.o \
- obj/gpu.o \
- obj/jagdasm.o \
- obj/jaguar.o \
- obj/jerry.o \
- obj/joystick.o \
- obj/log.o \
- obj/memory.o \
- obj/mmu.o \
- obj/objectp.o \
- obj/sdlemu_config.o \
- obj/sdlemu_opengl.o \
- obj/settings.o \
- obj/state.o \
- obj/tom.o \
- obj/unzip.o \
- obj/video.o \
- obj/vj.o \
- $(ICON)
-
-all: checkenv message obj $(TARGET)$(EXESUFFIX)
- @echo
- @echo -e "\033[01;33m***\033[00;32m Looks like it compiled OK... Give it a whirl!\033[00m"
-
-# Check the compilation environment, barf if not appropriate
-
-checkenv:
- @echo
- @echo -en "\033[01;33m***\033[00;32m Checking compilation environment... \033[00m"
-ifeq "" "$(shell which sdl-config)"
- @echo
- @echo
- @echo -e "\033[01;33mIt seems that you don't have the SDL development libraries installed. If you"
- @echo -e "have installed them, make sure that the sdl-config file is somewhere in your"
- @echo -e "path and is executable.\033[00m"
- @echo
-#Is there a better way to break out of the makefile?
- @breaky
-else
- @echo -e "\033[01;37mOK\033[00m"
+Q := @
endif
-# !!! NOTE !!! Need to put a check here for libcdio, GL, zlib
-message:
- @echo
- @echo -e "\033[01;33m***\033[00;32m Building Virtual Jaguar for $(MSG)...\033[00m"
- @echo
+# Gah
+OSTYPE := $(shell uname -a)
-clean:
- @echo -en "\033[01;33m***\033[00;32m Cleaning out the garbage...\033[00m"
- @rm -rf obj
- @rm -f ./$(TARGET)$(EXESUFFIX)
- @echo -e "\033[01;37mdone!\033[00m"
-
-obj:
- @mkdir obj
-
-# This is only done for Win32 at the moment...
-
-ifneq "" "$(ICON)"
-$(ICON): res/$(TARGET).rc res/$(TARGET).ico
- @echo -e "\033[01;33m***\033[00;32m Processing icon...\033[00m"
- @windres -i res/$(TARGET).rc -o $(ICON) --include-dir=./res
+# Should catch both 'darwin' and 'darwin7.0'
+ifeq "$(findstring Darwin,$(OSTYPE))" "Darwin"
+QMAKE_EXTRA := -spec macx-g++
endif
-obj/%.o: src/%.c
- @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
- @$(CC) $(CFLAGS) $(INCS) -c $< -o $@
-
-obj/%.o: src/%.cpp
- @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
- @$(CC) $(CPPFLAGS) $(INCS) -c $< -o $@
+# Set basic flags, these can be overridden from the environment
+CFLAGS = -O2
+CXXFLAGS = -O2
-obj/%.o: src/gui/%.cpp
- @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
- @$(CC) $(CPPFLAGS) $(INCS) -c $< -o $@
+# Add CPPFLAGS
+CFLAGS += $(CPPFLAGS)
+CXXFLAGS += $(CPPFLAGS)
-$(TARGET)$(EXESUFFIX): $(OBJS)
- @echo -e "\033[01;33m***\033[00;32m Linking it all together...\033[00m"
- @$(LD) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
-# strip --strip-all vj$(EXESUFFIX)
-# upx -9 vj$(EXESUFFIX)
+# Without these flags, Virtual Jaguar will run very slow.
+CFLAGS += -ffast-math -fomit-frame-pointer
+CXXFLAGS += -ffast-math -fomit-frame-pointer
-# Pull in dependencies autogenerated by gcc's -MMD switch
-# The "-" in front is there just in case they haven't been created yet
+# Flags to pass on to qmake...
+QMAKE_EXTRA += "QMAKE_CFLAGS_RELEASE=$(CFLAGS)"
+QMAKE_EXTRA += "QMAKE_CXXFLAGS_RELEASE=$(CXXFLAGS)"
+QMAKE_EXTRA += "QMAKE_LFLAGS_RELEASE=$(LDFLAGS)"
--include obj/*.d
+QMAKE_EXTRA += "QMAKE_CFLAGS_DEBUG=$(CFLAGS)"
+QMAKE_EXTRA += "QMAKE_CXXFLAGS_DEBUG=$(CXXFLAGS)"
+QMAKE_EXTRA += "QMAKE_LFLAGS_DEBUG=$(LDFLAGS)"
-#
-# Musashi specific stuffola
-#
-
-#obj/m68k%.o: obj/m68k%.c obj/m68kops.h
-# $(CC) $(CFLAGS) -Iobj -c src/m68k%.c -o obj/m68k%.o
-#obj/m68k%.o: obj/m68k%.c obj/m68kmake$(EXESUFFIX)
-# $(CC) $(CFLAGS) -Iobj -c src/m68k%.c -o obj/m68k%.o
+all: prepare virtualjaguar
+ @echo -e "\033[01;33m***\033[00;32m Success!\033[00m"
-#see if you can collapse all this crap into one or two lines...
-#NOTE: The above doesn't work for some reason...
+obj:
+ @mkdir obj
-obj/m68kcpu.o: obj/m68kops.h src/m68k.h src/m68kconf.h
- @echo -e "\033[01;33m***\033[00;32m Compiling m68kcpu.c...\033[00m"
- @$(CC) $(CFLAGS) -Iobj -c src/m68kcpu.c -o obj/m68kcpu.o
+prepare: obj
+ @echo -e "\033[01;33m***\033[00;32m Preparing to compile Virtual Jaguar...\033[00m"
+ @echo "#define VJ_RELEASE_VERSION \"v2.1.2\"" > src/version.h
+ @echo "#define VJ_RELEASE_SUBVERSION \"Final\"" >> src/version.h
+ @echo "#define VJ_REMOVE_DEV_CODE" >> src/version.h
+# @echo "#define VJ_RELEASE_VERSION \"GIT `git log -1 --pretty=format:%ci | cut -d ' ' -f 1 | tr -d -`\"" > src/version.h
+# @echo "#define VJ_RELEASE_SUBVERSION \"2.1.2 Prerelease\"" >> src/version.h
-obj/m68kops.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kops.c src/m68k.h src/m68kconf.h
- @echo -e "\033[01;33m***\033[00;32m Compiling m68kops.c...\033[00m"
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kops.c -o obj/m68kops.o
+virtualjaguar: sources libs makefile-qt
+ @echo -e "\033[01;33m***\033[00;32m Making Virtual Jaguar GUI...\033[00m"
+ $(Q)$(MAKE) -f makefile-qt CROSS=$(CROSS) V="$(V)"
-obj/m68kopac.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopac.c src/m68k.h src/m68kconf.h
- @echo -e "\033[01;33m***\033[00;32m Compiling m68kopac.c...\033[00m"
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kopac.c -o obj/m68kopac.o
+makefile-qt: virtualjaguar.pro
+ @echo -e "\033[01;33m***\033[00;32m Creating Qt makefile...\033[00m"
+ $(Q)$(CROSS)qmake $(QMAKE_EXTRA) virtualjaguar.pro -o makefile-qt
-obj/m68kopdm.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopdm.c src/m68k.h src/m68kconf.h
- @echo -e "\033[01;33m***\033[00;32m Compiling m68kopdm.c...\033[00m"
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kopdm.c -o obj/m68kopdm.o
+libs: obj/libm68k.a obj/libjaguarcore.a
+ @echo -e "\033[01;33m***\033[00;32m Libraries successfully made.\033[00m"
-obj/m68kopnz.o: obj/m68kmake$(EXESUFFIX) obj/m68kops.h obj/m68kopnz.c src/m68k.h src/m68kconf.h
- @echo -e "\033[01;33m***\033[00;32m Compiling m68kopnz.c...\033[00m"
- @$(CC) $(CFLAGS) -Isrc -c obj/m68kopnz.c -o obj/m68kopnz.o
+obj/libm68k.a: src/m68000/Makefile sources
+ @echo -e "\033[01;33m***\033[00;32m Making Customized UAE 68K Core...\033[00m"
+ $(Q)$(MAKE) -C src/m68000 CROSS=$(CROSS) CFLAGS="$(CFLAGS)" V="$(V)"
+ $(Q)cp src/m68000/obj/libm68k.a obj/
-obj/m68kdasm.o: src/m68kdasm.c src/m68k.h src/m68kconf.h
- @echo -e "\033[01;33m***\033[00;32m Compiling m68kdasm.c...\033[00m"
- @$(CC) $(CFLAGS) -Isrc -c src/m68kdasm.c -o obj/m68kdasm.o
+obj/libjaguarcore.a: jaguarcore.mak sources
+ @echo -e "\033[01;33m***\033[00;32m Making Virtual Jaguar core...\033[00m"
+ $(Q)$(MAKE) -f jaguarcore.mak CROSS=$(CROSS) CFLAGS="$(CFLAGS)" CXXFLAGS="$(CXXFLAGS)" V="$(V)"
-obj/m68kops.h: obj/m68kmake$(EXESUFFIX)
- @obj/m68kmake obj src/m68k_in.c
+sources: src/*.h src/*.cpp src/m68000/*.c src/m68000/*.h
-obj/m68kmake$(EXESUFFIX): src/m68kmake.c src/m68k_in.c
- @echo -e "\033[01;33m***\033[00;32m Preparing to make the Musashi core...\033[00m"
- @$(CC) $(WARNINGS) src/m68kmake.c -o obj/m68kmake$(EXESUFFIX)
+clean:
+ @echo -ne "\033[01;33m***\033[00;32m Cleaning out the garbage...\033[00m"
+ @-rm -rf ./obj
+ @-rm -rf ./src/m68000/obj
+ @-rm -rf makefile-qt
+ @-rm -rf virtualjaguar
+ @-$(FIND) . -name "*~" -exec rm -f {} \;
+ @echo "done!"
+
+statistics:
+ @echo -n "Lines in source files: "
+ @-$(FIND) ./src -name "*.cpp" | xargs cat | wc -l
+ @echo -n "Lines in header files: "
+ @-$(FIND) ./src -name "*.h" | xargs cat | wc -l
+
+dist: clean
projects / virtualjaguar / blobdiff