+ case ToolMouseUp:
+ if (Global::toolState == TSNone)
+ {
+ Global::toolState = TSPoint2;
+ // Prevent spurious line from drawing...
+ toolPoint[1] = toolPoint[0];
+ }
+ else if ((Global::toolState == TSPoint2) && shiftDown)
+ {
+ // Key override is telling us to make a new line, not continue the
+ // previous one.
+ toolPoint[0] = toolPoint[1];
+ }
+ else
+ {
+ double length = Vector::Magnitude(toolPoint[0], toolPoint[1]);
+ Circle * c = new Circle(toolPoint[0], length, Global::penWidth, Global::penColor, Global::penStyle);
+ c->layer = Global::activeLayer;
+ document.objects.push_back(c);
+ toolPoint[0] = toolPoint[1];
+ Global::toolState = TSNone;
+ }
+ }
+}
+
+void DrawingView::ArcHandler(int mode, Point p)
+{
+ switch (mode)
+ {
+ case ToolMouseDown:
+ if (Global::toolState == TSNone)
+ toolPoint[0] = p;
+ else if (Global::toolState == TSPoint2)
+ toolPoint[1] = p;
+ else if (Global::toolState == TSPoint3)
+ toolPoint[2] = p;
+ else
+ toolPoint[3] = p;
+
+ break;
+
+ case ToolMouseMove:
+ if (Global::toolState == TSNone)
+ toolPoint[0] = p;
+ else if (Global::toolState == TSPoint2)
+ toolPoint[1] = p;
+ else if (Global::toolState == TSPoint3)
+ {
+ toolPoint[2] = p;
+ angleSnap = true;
+ }
+ else
+ {
+ toolPoint[3] = p;
+ angleSnap = true;
+ }
+
+ break;
+
+ case ToolMouseUp:
+ if (Global::toolState == TSNone)
+ {
+ // Prevent spurious line from drawing...
+ toolPoint[1] = toolPoint[0];
+ Global::toolState = TSPoint2;
+ }
+ else if (Global::toolState == TSPoint2)
+ {
+ if (shiftDown)
+ {
+ // Key override is telling us to start arc at new center, not
+ // continue the current one.
+ toolPoint[0] = toolPoint[1];
+ return;
+ }
+
+ // Set the radius in toolPoint[1].x
+ toolPoint[1].x = Vector::Magnitude(toolPoint[0], toolPoint[1]);
+ Global::toolState = TSPoint3;
+ }
+ else if (Global::toolState == TSPoint3)
+ {
+ // Set the angle in toolPoint[2].x
+ toolPoint[2].x = Vector::Angle(toolPoint[0], toolPoint[2]);
+ Global::toolState = TSPoint4;
+ }
+ else
+ {
+ double endAngle = Vector::Angle(toolPoint[0], toolPoint[3]);
+ double span = endAngle - toolPoint[2].x;
+
+ if (span < 0)
+ span += TAU;
+
+ Arc * arc = new Arc(toolPoint[0], toolPoint[1].x, toolPoint[2].x, span, Global::penWidth, Global::penColor, Global::penStyle);
+ arc->layer = Global::activeLayer;
+ document.objects.push_back(arc);
+ Global::toolState = TSNone;
+ }
+ }
+}
+
+void DrawingView::RotateHandler(int mode, Point p)
+{
+ switch (mode)
+ {
+ case ToolMouseDown:
+ if (Global::toolState == TSNone)
+ {
+ toolPoint[0] = p;
+// SavePointsFrom(select, toolScratch);
+ CopyObjects(select, toolScratch2);
+ Global::toolState = TSPoint1;
+ }
+ else if (Global::toolState == TSPoint1)
+ toolPoint[0] = p;
+ else
+ toolPoint[1] = p;
+
+ break;
+
+ case ToolMouseMove:
+ if ((Global::toolState == TSPoint1) || (Global::toolState == TSNone))
+ toolPoint[0] = p;
+ else if (Global::toolState == TSPoint2)
+ {
+ toolPoint[1] = p;
+
+ if (shiftDown)
+ return;
+
+ angleSnap = true;
+ double angle = Vector(toolPoint[0], toolPoint[1]).Angle();
+ VPVectorIter j = select.begin();
+// std::vector<Object>::iterator i = toolScratch.begin();
+ VPVectorIter i = toolScratch2.begin();
+
+// for(; i!=toolScratch.end(); i++, j++)
+ for(; i!=toolScratch2.end(); i++, j++)
+ {
+// Object objT = *i;
+// Point p1 = Geometry::RotatePointAroundPoint(objT.p[0], toolPoint[0], angle);
+// Point p2 = Geometry::RotatePointAroundPoint(objT.p[1], toolPoint[0], angle);
+ Object * objT = (Object *)(*i);
+ Object * objS = (Object *)(*j);
+
+ Point p1 = Geometry::RotatePointAroundPoint(objT->p[0], toolPoint[0], angle);
+ Point p2 = Geometry::RotatePointAroundPoint(objT->p[1], toolPoint[0], angle);
+
+ objS->p[0] = p1;
+ objS->p[1] = p2;
+
+// if (objT.type == OTArc || objT.type == OTText)
+ if (objT->type == OTArc || objT->type == OTText)
+ {
+// objS->angle[0] = objT.angle[0] + angle;
+ objS->angle[0] = objT->angle[0] + angle;
+
+ if (objS->angle[0] > TAU)
+ objS->angle[0] -= TAU;
+ }
+// else if (objT.type == OTContainer)
+ else if (objT->type == OTContainer)
+ {
+ // OK, this doesn't work because toolScratch only has points and nothing in the containers... [ACTUALLY... toolScratch is is a vector of type Object... which DOESN'T have an objects vector in it...]
+// Container * c = (Container *)&objT;
+ Container * c = (Container *)objT;
+ Container * c2 = (Container *)objS;
+ VPVectorIter l = c->objects.begin();
+ // TODO: Rotate items in the container
+ // TODO: Make this recursive
+ for(VPVectorIter k=c2->objects.begin(); k!=c2->objects.end(); k++, l++)
+ {
+ Object * obj3 = (Object *)(*k);
+ Object * obj4 = (Object *)(*l);
+
+ p1 = Geometry::RotatePointAroundPoint(obj4->p[0], toolPoint[0], angle);
+ p2 = Geometry::RotatePointAroundPoint(obj4->p[1], toolPoint[0], angle);
+
+ obj3->p[0] = p1;
+ obj3->p[1] = p2;
+// obj3->angle[0] = objT.angle[0] + angle;
+ obj3->angle[0] = obj4->angle[0] + angle;
+
+ if (obj3->angle[0] > TAU)
+ obj3->angle[0] -= TAU;
+ }
+
+ Rect r = GetObjectExtents(objS);
+ c2->p[0] = r.TopLeft();
+ c2->p[1] = r.BottomRight();
+ }
+ }
+ }
+
+ break;
+
+ case ToolMouseUp:
+ if (Global::toolState == TSPoint1)
+ {
+ Global::toolState = TSPoint2;
+ // Prevent spurious line from drawing...
+ toolPoint[1] = toolPoint[0];
+ }
+ else if ((Global::toolState == TSPoint2) && shiftDown)
+ {
+ // Key override is telling us to make a new line, not continue the
+ // previous one.
+ toolPoint[0] = toolPoint[1];
+ }
+ else
+ {
+ // Either we're finished with our rotate, or we're stamping a copy.
+ if (ctrlDown)
+ {
+ // Stamp a copy of the selection at the current rotation & bail
+ VPVector temp;
+ CopyObjects(select, temp);
+ ClearSelected(temp);
+ AddObjectsTo(document.objects, temp);
+// RestorePointsTo(select, toolScratch);
+ RestorePointsTo(select, toolScratch2);
+ return;
+ }
+
+ toolPoint[0] = p;
+ Global::toolState = TSPoint1;
+// SavePointsFrom(select, toolScratch);
+ DeleteContents(toolScratch2);
+ CopyObjects(select, toolScratch2);
+ }
+
+ break;
+
+ case ToolKeyDown:
+ // Reset the selection if shift held down...
+ if (shiftDown)
+// RestorePointsTo(select, toolScratch);
+ RestorePointsTo(select, toolScratch2);
+
+ break;
+
+ case ToolKeyUp:
+ // Reset selection when key is let up
+ if (!shiftDown)
+ RotateHandler(ToolMouseMove, toolPoint[1]);
+
+ break;
+
+ case ToolCleanup:
+// RestorePointsTo(select, toolScratch);
+ RestorePointsTo(select, toolScratch2);
+ DeleteContents(toolScratch2);
+ }
+}
+
+void DrawingView::MirrorHandler(int mode, Point p)
+{
+ switch (mode)
+ {
+ case ToolMouseDown:
+ if (Global::toolState == TSNone)
+ {
+ toolPoint[0] = p;
+ SavePointsFrom(select, toolScratch);
+ Global::toolState = TSPoint1;
+ }
+ else if (Global::toolState == TSPoint1)
+ toolPoint[0] = p;
+ else
+ toolPoint[1] = p;
+
+ break;
+
+ case ToolMouseMove:
+ if ((Global::toolState == TSPoint1) || (Global::toolState == TSNone))
+ toolPoint[0] = p;
+ else if (Global::toolState == TSPoint2)
+ {
+ toolPoint[1] = p;
+
+ if (shiftDown)
+ return;
+
+ angleSnap = true;
+ double angle = Vector(toolPoint[0], toolPoint[1]).Angle();
+ VPVectorIter j = select.begin();
+ std::vector<Object>::iterator i = toolScratch.begin();
+
+ for(; i!=toolScratch.end(); i++, j++)
+ {
+ Object obj = *i;
+ Point p1 = Geometry::MirrorPointAroundLine(obj.p[0], toolPoint[0], toolPoint[1]);
+ Point p2 = Geometry::MirrorPointAroundLine(obj.p[1], toolPoint[0], toolPoint[1]);
+ Object * obj2 = (Object *)(*j);
+ obj2->p[0] = p1;
+ obj2->p[1] = p2;
+
+/*
+N.B.: When mirroring an arc thru a horizontal axis, this causes the arc to have
+ a negative start angle which makes it impossible to interact with.
+ !!! FIX !!!
+*/
+ if (obj.type == OTArc)
+ {
+ // This is 2*mirror angle - obj angle - obj span
+ obj2->angle[0] = (2.0 * angle) - obj.angle[0] - obj.angle[1];
+
+ if (obj2->angle[0] > TAU)
+ obj2->angle[0] -= TAU;
+ }
+ }
+ }
+
+ break;
+
+ case ToolMouseUp:
+ if (Global::toolState == TSPoint1)
+ {
+ Global::toolState = TSPoint2;
+ // Prevent spurious line from drawing...
+ toolPoint[1] = toolPoint[0];
+ }
+ else if ((Global::toolState == TSPoint2) && shiftDown)
+ {
+ // Key override is telling us to make a new line, not continue the
+ // previous one.
+ toolPoint[0] = toolPoint[1];
+ }
+ else
+ {
+ // Either we're finished with our rotate, or we're stamping a copy.
+ if (ctrlDown)
+ {
+ // Stamp a copy of the selection at the current rotation & bail
+ VPVector temp;
+ CopyObjects(select, temp);
+ ClearSelected(temp);
+ AddObjectsTo(document.objects, temp);
+ RestorePointsTo(select, toolScratch);
+ return;
+ }
+
+ toolPoint[0] = p;
+ Global::toolState = TSPoint1;
+ SavePointsFrom(select, toolScratch);
+ }
+
+ break;
+
+ case ToolKeyDown:
+ // Reset the selection if shift held down...
+ if (shiftDown)
+ RestorePointsTo(select, toolScratch);
+
+ break;
+
+ case ToolKeyUp:
+ // Reset selection when key is let up
+ if (!shiftDown)
+ MirrorHandler(ToolMouseMove, toolPoint[1]);
+
+ break;
+
+ case ToolCleanup:
+ RestorePointsTo(select, toolScratch);
+ }
+}
+
+void DrawingView::DimensionHandler(int mode, Point p)
+{
+ switch (mode)
+ {
+ case ToolMouseDown:
+ if (Global::toolState == TSNone)
+ toolPoint[0] = p;
+ else
+ toolPoint[1] = p;
+
+ break;
+
+ case ToolMouseMove:
+ if (Global::toolState == TSNone)
+ toolPoint[0] = p;
+ else
+ toolPoint[1] = p;
+
+ break;
+
+ case ToolMouseUp:
+ if (Global::toolState == TSNone)
+ {
+ Global::toolState = TSPoint2;
+ // Prevent spurious line from drawing...
+ toolPoint[1] = toolPoint[0];
+ }
+ else if ((Global::toolState == TSPoint2) && shiftDown)
+ {
+ // Key override is telling us to make a new line, not continue the
+ // previous one.
+ toolPoint[0] = toolPoint[1];
+ }
+ else
+ {
+ Dimension * d = new Dimension(toolPoint[0], toolPoint[1], DTLinear);
+ d->layer = Global::activeLayer;
+ document.objects.push_back(d);
+ Global::toolState = TSNone;
+ }
+ }
+}
+
+void DrawingView::TriangulateHandler(int mode, Point/*p*/)
+{
+ switch (mode)
+ {
+ case ToolMouseDown:
+ {
+ // Skip if nothing hovered...
+ if (numHovered != 1)
+ break;
+
+ VPVector hover = GetHovered();
+ Object * obj = (Object *)hover[0];
+
+ // Skip if it's not a line...
+ if (obj->type != OTLine)
+ break;
+
+ if (Global::toolState == TSNone)
+ toolObj[0] = obj;
+ else if (Global::toolState == TSPoint2)
+ toolObj[1] = obj;
+ else
+ toolObj[2] = obj;
+
+ break;
+ }
+#if 0
+ case ToolMouseMove:
+ if (Global::toolState == TSNone)
+ toolPoint[0] = p;
+ else if (Global::toolState == TSPoint2)
+ toolPoint[1] = p;
+ else if (Global::toolState == TSPoint3)
+ {
+ toolPoint[2] = p;
+ angleSnap = true;
+ }
+ else
+ {
+ toolPoint[3] = p;
+ angleSnap = true;
+ }
+
+ break;
+#endif
+ case ToolMouseUp:
+ if (Global::toolState == TSNone)
+ {
+ Global::toolState = TSPoint2;
+ }
+ else if (Global::toolState == TSPoint2)
+ {
+/* if (shiftDown)
+ {
+ // Key override is telling us to start arc at new center, not
+ // continue the current one.
+ toolPoint[0] = toolPoint[1];
+ return;
+ }*/
+
+ Global::toolState = TSPoint3;
+ }
+ else
+ {
+ double len2 = Vector::Magnitude(toolObj[1]->p[0], toolObj[1]->p[1]);
+ double len3 = Vector::Magnitude(toolObj[2]->p[0], toolObj[2]->p[1]);
+
+ Circle c1(toolObj[0]->p[0], len2);
+ Circle c2(toolObj[0]->p[1], len3);
+
+ Geometry::CheckCircleToCircleIntersection((Object *)&c1, (Object *)&c2);
+
+ // Only move lines if the triangle formed by them is not degenerate
+ if (Global::numIntersectPoints > 0)
+ {
+ toolObj[1]->p[0] = toolObj[0]->p[0];
+ toolObj[1]->p[1] = Global::intersectPoint[0];
+
+ toolObj[2]->p[0] = Global::intersectPoint[0];
+ toolObj[2]->p[1] = toolObj[0]->p[1];
+ }
+
+ Global::toolState = TSNone;
+ }
+ }
+}
+
+void DrawingView::TrimHandler(int mode, Point p)
+{
+/*
+N.B.: this code is lifted straight out of the old oo code. needs to be updated.
+ Also: trim tool should ignore snap.
+*/
+ switch (mode)
+ {
+ case ToolMouseDown:
+ {
+#if 0
+ Object * toTrim = doc->lastObjectHovered;
+
+ if (toTrim == NULL)
+ return;
+
+ Vector v(((Line *)toTrim)->position, ((Line *)toTrim)->endpoint);
+
+ // Check to see which case we have...
+ // We're trimming point #1...
+ if (t == 0)
+ {
+ ((Line *)toTrim)->position = ((Line *)toTrim)->position + (v * u);
+ }
+ else if (u == 1.0)
+ {
+ ((Line *)toTrim)->endpoint = ((Line *)toTrim)->position + (v * t);
+ }
+ else
+ {
+ Point p1 = ((Line *)toTrim)->position + (v * t);
+ Point p2 = ((Line *)toTrim)->position + (v * u);
+ Point p3 = ((Line *)toTrim)->endpoint;
+ ((Line *)toTrim)->endpoint = p1;
+ Line * line = new Line(p2, p3);
+ emit ObjectReady(line);
+ }
+
+ doc->lastObjectHovered = NULL;
+#endif
+ }
+ break;
+
+ case ToolMouseMove:
+ {
+#if 0
+ Object * toTrim = doc->lastObjectHovered;
+ t = 0, u = 1.0;
+
+ if (toTrim == NULL)
+ return;
+
+ if (toTrim->type != OTLine)
+ return;
+
+ double pointHoveredT = Geometry::ParameterOfLineAndPoint(((Line *)toTrim)->position, ((Line *)toTrim)->endpoint, point);
+
+ std::vector<Object *>::iterator i;
+
+ for(i=doc->objects.begin(); i!=doc->objects.end(); i++)
+ {
+ // Can't trim against yourself... :-P
+ if (*i == toTrim)
+ continue;
+
+ Object * trimAgainst = *i;
+ double t1;//, u1;
+
+ if ((toTrim->type != OTLine) || (trimAgainst->type != OTLine))
+ continue;
+
+ int intersects = Geometry::Intersects((Line *)toTrim, (Line *)trimAgainst, &t1);//, &u1);
+
+ if (intersects)
+ {
+ // Now what? We don't know which side to trim!
+ // ... now we do, we know which side of the Line we're on!
+ if ((t1 > t) && (t1 < pointHoveredT))
+ t = t1;
+
+ if ((t1 < u) && (t1 > pointHoveredT))
+ u = t1;
+ }
+ }
+#endif
+ // Bail out if nothing hovered...
+ if (numHovered != 1)
+ {
+ toolObj[0] = NULL;
+ return;
+ }
+
+ VPVector hover = GetHovered();
+ Object * obj = (Object *)hover[0];
+
+ // Skip if it's not a line...
+ if (obj->type != OTLine)
+ {
+ toolObj[0] = NULL;
+ return;
+ }
+
+ toolObj[0] = obj;
+ double hoveredParam = Geometry::ParameterOfLineAndPoint(obj->p[0], obj->p[1], p);
+
+ // Currently only deal with line against line trimming, can expand to
+ // others as well (line/circle, circle/circle, line/arc, etc)
+ VPVectorIter i;
+ for(i=document.objects.begin(); i!=document.objects.end(); i++)
+ {
+ obj = (Object *)(*i);
+
+ if (obj == toolObj[0])
+ continue;
+ else if (obj->type != OTLine)
+ continue;
+
+ Geometry::CheckLineToLineIntersection(toolObj[0], obj);
+
+ if (Global::numIntersectParams > 0)
+ {
+ // Mark the line segment somehow (the side the mouse is on) so that it can be drawn & trimmed when we hit ToolMouseDown.
+ }
+ }
+ }
+ break;
+
+ case ToolMouseUp:
+ break;
+
+ case ToolKeyDown:
+ break;
+
+ case ToolKeyUp:
+ break;
+
+ case ToolCleanup:
+ break;
+ }
+}
+
+void DrawingView::ParallelHandler(int mode, Point /*p*/)
+{
+ switch (mode)
+ {
+ case ToolMouseDown:
+ break;
+
+ case ToolMouseMove:
+ break;
+
+ case ToolMouseUp:
+ break;
+
+ case ToolKeyDown:
+ break;
+
+ case ToolKeyUp:
+ break;
+
+ case ToolCleanup:
+ break;
+ }
+}
+
+void DrawingView::mousePressEvent(QMouseEvent * event)
+{
+ if (event->button() == Qt::LeftButton)
+ {
+//printf("mousePressEvent::Qt::LeftButton numHovered=%li\n", numHovered);
+ Vector point = Painter::QtToCartesianCoords(Vector(event->x(), event->y()));
+
+ // Handle tool processing, if any
+ if (Global::tool)
+ {
+ if (hoveringIntersection)
+ point = intersectionPoint;
+ else if (hoverPointValid)
+ point = hoverPoint;
+ else if (Global::snapToGrid)
+ point = SnapPointToGrid(point);
+
+ //Also, may want to figure out if hovering over a snap point on an
+ //object, snap to grid if not.
+ // Snap to object point if valid...
+// if (Global::snapPointIsValid)
+// point = Global::snapPoint;
+
+ ToolHandler(ToolMouseDown, point);
+ return;
+ }
+
+ // Clear the selection only if CTRL isn't being held on click
+ if (!ctrlDown)
+ ClearSelected(document.objects);
+// ClearSelection();
+
+ // If any objects are being hovered on click, add them to the selection
+ // & return
+ if (numHovered > 0)
+ {
+ AddHoveredToSelection();
+ update(); // needed??
+// GetHovered(hover); // prolly needed
+ VPVector hover2 = GetHovered();
+ dragged = (Object *)hover2[0];
+ draggingObject = true;
+//printf("mousePressEvent::numHovered > 0 (hover2[0]=$%llx, type=%s)\n", dragged, objName[dragged->type]);
+
+ // Alert the pen widget
+// Maybe do this with an eyedropper tool on the pen bar? [YES]
+// emit ObjectSelected(dragged);
+ if (Global::penDropper)
+ {
+ Global::penColor = dragged->color;
+ Global::penWidth = dragged->thickness;
+ Global::penStyle = dragged->style;
+ emit ObjectSelected(dragged);
+ ClearSelected(document.objects);
+ return;
+ }
+
+ if (Global::penStamp)
+ {
+ dragged->color = Global::penColor;
+ dragged->thickness = Global::penWidth;
+ dragged->style = Global::penStyle;
+ return;
+ }
+
+ // See if anything is using just a straight click on a handle
+ if (HandleObjectClicked())
+ {
+ draggingObject = false;
+ update();
+ return;
+ }
+
+ // Needed for grab & moving objects
+ // We do it *after*... why? (doesn't seem to confer any advantage...)
+ if (hoveringIntersection)
+ oldPoint = intersectionPoint;
+ else if (hoverPointValid)
+ oldPoint = hoverPoint;
+ else if (Global::snapToGrid)
+ oldPoint = SnapPointToGrid(point);
+
+ // Needed for fixed length handling
+ if (Global::fixedLength)
+ {
+ if (dragged->type == OTLine)
+ {
+ dragged->length = Vector::Magnitude(dragged->p[0], dragged->p[1]);
+ }
+ }
+
+ if (dragged->type == OTCircle)
+ {
+ // Save for informative text, uh, er, informing
+ dragged->length = dragged->radius[0];
+ }
+
+ return;
+ }
+
+ // Didn't hit any object and not using a tool, so do a selection
+ // rectangle
+ Global::selectionInProgress = true;
+ Global::selection.setTopLeft(QPointF(point.x, point.y));
+ Global::selection.setBottomRight(QPointF(point.x, point.y));
+ select = GetSelection();
+ }
+ else if (event->button() == Qt::MiddleButton)
+ {
+ scrollDrag = true;
+ oldPoint = Vector(event->x(), event->y());
+ // Should also change the mouse pointer as well...
+ setCursor(Qt::SizeAllCursor);
+ }
+}
+
+void DrawingView::mouseMoveEvent(QMouseEvent * event)
+{
+ // It seems that wheelEvent() triggers this for some reason...
+ if (scrollWheelSeen)
+ {
+ scrollWheelSeen = false;
+ return;
+ }
+
+ Vector point = Painter::QtToCartesianCoords(Vector(event->x(), event->y()));
+ Global::selection.setBottomRight(QPointF(point.x, point.y));
+ // Only needs to be done here, as mouse down is always preceded by movement
+ Global::snapPointIsValid = false;
+ hoveringIntersection = false;
+ oldScrollPoint = Vector(event->x(), event->y());
+
+ // Scrolling...
+ if ((event->buttons() & Qt::MiddleButton) || scrollDrag)
+ {
+ point = Vector(event->x(), event->y());
+ // Since we're using Qt coords for scrolling, we have to adjust them
+ // here to conform to Cartesian coords, since the origin is using
+ // Cartesian. :-)
+ Vector delta(oldPoint, point);
+ delta /= Global::zoom;
+ delta.y = -delta.y;
+ Global::origin -= delta;
+
+// UpdateGridBackground();
+ update();
+ oldPoint = point;
+ return;
+ }
+
+ // If we're doing a selection rect, see if any objects are engulfed by it
+ // (implies left mouse button held down)
+ if (Global::selectionInProgress)
+ {
+ CheckObjectBounds();
+
+ // Make sure previously selected objects stay selected (CTRL held)
+ for(VPVectorIter i=select.begin(); i!=select.end(); i++)
+ {
+ // Make sure *not* to select items on hidden layers
+ if (Global::layerHidden[((Object *)(*i))->layer] == false)
+ ((Object *)(*i))->selected = true;
+ }
+
+ update();
+ return;
+ }
+
+ // Do object hit testing...
+ bool needUpdate = HitTestObjects(point);
+ VPVector hover2 = GetHovered(true); // Exclude dimension objects and circle centers (probably need to add arc centers too) from hover (also dragged objects...)
+#if 0
+{
+if (needUpdate)
+{
+ printf("mouseMoveEvent:: numHovered=%li, hover2.size()=%li\n", numHovered, hover2.size());
+
+ if (hover2.size() > 0)
+ printf(" (hover2[0]=$%llX, type=%s)\n", hover2[0], objName[((Object *)hover2[0])->type]);
+}
+}
+#endif
+
+ // Check for multi-hover...
+ if (hover2.size() > 1)
+ {
+//need to check for case where hover is over 2 circles and a 3rd's center (no longer a problem, I think)...
+ Object * obj1 = (Object *)hover2[0], * obj2 = (Object *)hover2[1];
+
+ Geometry::Intersects(obj1, obj2);
+ int numIntersecting = Global::numIntersectParams;
+ double t = Global::intersectParam[0];
+ double u = Global::intersectParam[1];
+
+ if (numIntersecting > 0)
+ {
+ Vector v1 = Geometry::GetPointForParameter(obj1, t);
+ Vector v2 = Geometry::GetPointForParameter(obj2, u);
+ QString text = tr("Intersection t=%1 (%3, %4), u=%2 (%5, %6)");
+ informativeText = text.arg(t).arg(u).arg(v1.x).arg(v1.y).arg(v2.x).arg(v2.y);
+
+ hoveringIntersection = true;
+ intersectionPoint = v1;
+ }
+
+ numIntersecting = Global::numIntersectPoints;
+
+ if (numIntersecting > 0)
+ {
+ Vector v1 = Global::intersectPoint[0];
+
+ if (numIntersecting == 2)
+ {
+ Vector v2 = Global::intersectPoint[1];
+
+ if (Vector::Magnitude(v2, point) < Vector::Magnitude(v1, point))
+ v1 = v2;
+ }
+
+ QString text = tr("Intersection <%1, %2>");
+ informativeText = text.arg(v1.x).arg(v1.y);
+ hoveringIntersection = true;
+ intersectionPoint = v1;
+ }
+ }
+ else if (hover2.size() == 1)
+ {
+ Object * obj = (Object *)hover2[0];
+
+ if (obj->type == OTLine)
+ {
+/*
+Not sure that this is the best way to handle this, but it works(TM)...
+*/
+ Point midpoint = Geometry::Midpoint((Line *)obj);
+ Vector v1 = Vector::Magnitude(midpoint, point);
+
+ if ((v1.Magnitude() * Global::zoom) < 8.0)
+ {
+ QString text = tr("Midpoint <%1, %2>");
+ informativeText = text.arg(midpoint.x).arg(midpoint.y);
+ hoverPointValid = true;
+ hoverPoint = midpoint;
+ needUpdate = true;
+ }
+ }
+ else if (obj->type == OTCircle)
+ {
+ if ((draggingObject && (dragged->type == OTLine)) && (dragged->hitPoint[0] || dragged->hitPoint[1]))
+ {
+ Point p = (dragged->hitPoint[0] ? dragged->p[1] : dragged->p[0]);
+ Geometry::FindTangents(obj, p);
+
+ if (Global::numIntersectPoints > 0)
+ {
+ hoveringIntersection = true;
+ intersectionPoint = Geometry::NearestTo(point, Global::intersectPoint[0], Global::intersectPoint[1]);
+ }
+ }
+ else if ((Global::tool == TTLine) && (Global::toolState == TSPoint2))
+ {
+ Geometry::FindTangents(obj, toolPoint[0]);
+
+ if (Global::numIntersectPoints > 0)
+ {
+ hoveringIntersection = true;
+ intersectionPoint = Geometry::NearestTo(point, Global::intersectPoint[0], Global::intersectPoint[1]);
+ }
+ }
+ }
+ }
+
+ // Handle object movement (left button down & over an object)
+ if ((event->buttons() & Qt::LeftButton) && draggingObject && !Global::tool)
+ {
+ if (hoveringIntersection)
+ point = intersectionPoint;
+ else if (hoverPointValid)
+ point = hoverPoint;
+ else if (Global::snapToGrid)
+ point = SnapPointToGrid(point);
+
+ HandleObjectMovement(point);
+ update();
+ oldPoint = point;
+ return;
+ }
+
+ // Do tool handling, if any are active...
+ if (Global::tool)
+ {
+ if (hoveringIntersection)
+ point = intersectionPoint;
+ else if (hoverPointValid)
+ point = hoverPoint;
+ else if (Global::snapToGrid)
+ {
+ if (angleSnap)
+ point = SnapPointToAngle(point);
+ else
+ point = SnapPointToGrid(point);
+ }
+
+ ToolHandler(ToolMouseMove, point);
+ }
+
+ // This is used to draw the tool crosshair...
+ oldPoint = point;
+
+ if (needUpdate || Global::tool)
+ update();
+}
+
+void DrawingView::mouseReleaseEvent(QMouseEvent * event)
+{
+ if (event->button() == Qt::LeftButton)
+ {
+//We need to update especially if nothing collided and the state needs to change. !!! FIX !!!
+//could set it up to use the document's update function (assumes that all object
+//updates are being reported correctly:
+// if (document.NeedsUpdate())
+ // Do an update if collided with at least *one* object in the document
+// if (collided)
+ update();
+
+ if (Global::tool)
+ {
+ Vector point = Painter::QtToCartesianCoords(Vector(event->x(), event->y()));
+ ToolHandler(ToolMouseUp, point);
+ return;
+ }
+
+// if (Global::selectionInProgress)
+ Global::selectionInProgress = false;
+
+ informativeText.clear();
+// Should we be doing this automagically? Hmm...
+ // Clear our vectors
+// select.clear();
+//// hover.clear();
+
+ // Scoop 'em up (do we need to??? Seems we do, because keyboard movement uses it. Also, tools use it too. But we can move it out of here)
+ select = GetSelection();
+
+ draggingObject = false;
+ }
+ else if (event->button() == Qt::MiddleButton)
+ {
+ scrollDrag = false;
+
+ if (Global::penStamp)
+ setCursor(curMarker);
+ else if (Global::penDropper)
+ setCursor(curDropper);
+ else
+ setCursor(Qt::ArrowCursor);
+
+ // Need to convert this, since it's in Qt coordinates (for wheelEvent)
+ oldPoint = Painter::QtToCartesianCoords(oldPoint);
+ }
+}
+
+void DrawingView::wheelEvent(QWheelEvent * event)
+{
+ double zoomFactor = 1.20;
+ scrollWheelSeen = true;
+
+ if (event->angleDelta().y() < 0)
+ {
+ if (Global::zoom > 400.0)
+ return;
+
+ Global::zoom *= zoomFactor;
+ }
+ else
+ {
+ if (Global::zoom < 0.125)
+ return;
+
+ Global::zoom /= zoomFactor;
+ }
+
+ Point np = Painter::QtToCartesianCoords(oldScrollPoint);
+ Global::origin += (oldPoint - np);
+
+ emit(NeedZoomUpdate());
+}
+
+void DrawingView::keyPressEvent(QKeyEvent * event)
+{
+ bool oldShift = shiftDown;
+ bool oldCtrl = ctrlDown;
+ bool oldAlt = altDown;
+
+ if (event->key() == Qt::Key_Shift)
+ shiftDown = true;
+ else if (event->key() == Qt::Key_Control)
+ ctrlDown = true;
+ else if (event->key() == Qt::Key_Alt)
+ altDown = true;
+
+ // If there's a change in any of the modifier key states, pass it on to
+ // the current tool's handler
+ if ((oldShift != shiftDown) || (oldCtrl != ctrlDown))
+ {
+ if (Global::tool)
+ ToolHandler(ToolKeyDown, Point(0, 0));
+
+ update();
+ }
+
+ if (oldAlt != altDown)
+ {
+ scrollDrag = true;
+ setCursor(Qt::SizeAllCursor);
+ oldPoint = oldScrollPoint;
+ }
+
+ if (select.size() > 0)
+ {
+ if (event->key() == Qt::Key_Up)
+ {
+ TranslateObjects(select, Point(0, +1.0));
+ update();
+ }
+ else if (event->key() == Qt::Key_Down)
+ {
+ TranslateObjects(select, Point(0, -1.0));
+ update();
+ }
+ else if (event->key() == Qt::Key_Right)
+ {
+ TranslateObjects(select, Point(+1.0, 0));
+ update();
+ }
+ else if (event->key() == Qt::Key_Left)
+ {
+ TranslateObjects(select, Point(-1.0, 0));
+ update();
+ }
+ }
+}
+
+void DrawingView::keyReleaseEvent(QKeyEvent * event)
+{
+ bool oldShift = shiftDown;
+ bool oldCtrl = ctrlDown;
+ bool oldAlt = altDown;
+
+ if (event->key() == Qt::Key_Shift)
+ shiftDown = false;
+ else if (event->key() == Qt::Key_Control)
+ ctrlDown = false;
+ else if (event->key() == Qt::Key_Alt)
+ altDown = false;
+
+ if ((oldShift != shiftDown) || (oldCtrl != ctrlDown))
+ {
+ if (Global::tool)
+ ToolHandler(ToolKeyUp, Point(0, 0));
+
+ update();
+ }
+
+ if (oldAlt != altDown)
+ {
+ scrollDrag = false;
+
+ if (Global::penStamp)
+ setCursor(curMarker);
+ else if (Global::penDropper)
+ setCursor(curDropper);
+ else
+ setCursor(Qt::ArrowCursor);
+ }
+}
+
+//
+// This looks strange, but it's really quite simple: We want a point that's
+// more than half-way to the next grid point to snap there while conversely we
+// want a point that's less than half-way to to the next grid point then snap
+// to the one before it. So we add half of the grid spacing to the point, then
+// divide by it so that we can remove the fractional part, then multiply it
+// back to get back to the correct answer.
+//
+Point DrawingView::SnapPointToGrid(Point point)
+{
+ point += Global::gridSpacing / 2.0; // *This* adds to Z!!!
+ point /= Global::gridSpacing;
+ point.x = floor(point.x);//need to fix this for negative numbers...
+ point.y = floor(point.y);
+ point.z = 0; // Make *sure* Z doesn't go anywhere!!!
+ point *= Global::gridSpacing;
+ return point;
+}
+
+Point DrawingView::SnapPointToAngle(Point point)
+{
+ // Snap to a single digit angle (using toolpoint #1 as the center)
+ double angle = Vector::Angle(toolPoint[0], point);
+ double length = Vector::Magnitude(toolPoint[0], point);
+
+ // Convert from radians to degrees
+ double degAngle = angle * RADIANS_TO_DEGREES;
+ double snapAngle = (double)((int)(degAngle + 0.5));
+
+ Vector v;
+ v.SetAngleAndLength(snapAngle * DEGREES_TO_RADIANS, length);
+ point = toolPoint[0] + v;
+
+ return point;
+}
+
+Rect DrawingView::GetObjectExtents(Object * obj)
+{
+ // Default to empty rect, if object checks below fail for some reason
+ Rect rect;
+
+ switch (obj->type)
+ {
+ case OTLine:
+ case OTDimension:
+ {
+ rect = Rect(obj->p[0], obj->p[1]);
+ break;
+ }
+
+ case OTCircle:
+ {
+ rect = Rect(obj->p[0], obj->p[0]);
+ rect.Expand(obj->radius[0]);
+ break;
+ }
+
+ case OTArc:
+ {
+ Arc * a = (Arc *)obj;
+
+ double start = a->angle[0];
+ double end = start + a->angle[1];
+ rect = Rect(Point(cos(start), sin(start)), Point(cos(end), sin(end)));
+
+ // If the end of the arc is before the beginning, add 360 degrees to it
+ if (end < start)
+ end += TAU;
+
+ // Adjust the bounds depending on which axes are crossed
+ if ((start < QTR_TAU) && (end > QTR_TAU))
+ rect.t = 1.0;
+
+ if ((start < HALF_TAU) && (end > HALF_TAU))
+ rect.l = -1.0;
+
+ if ((start < THREE_QTR_TAU) && (end > THREE_QTR_TAU))
+ rect.b = -1.0;
+
+ if ((start < TAU) && (end > TAU))
+ rect.r = 1.0;
+
+ if ((start < (TAU + QTR_TAU)) && (end > (TAU + QTR_TAU)))
+ rect.t = 1.0;
+
+ if ((start < (TAU + HALF_TAU)) && (end > (TAU + HALF_TAU)))
+ rect.l = -1.0;
+
+ if ((start < (TAU + THREE_QTR_TAU)) && (end > (TAU + THREE_QTR_TAU)))
+ rect.b = -1.0;
+
+ rect *= a->radius[0];
+ rect.Translate(a->p[0]);
+ break;
+ }
+
+ case OTText:
+ {
+ Text * t = (Text *)obj;
+ rect = Rect(t->p[0], Point(t->p[0].x + t->extents.Width(), t->p[0].y - t->extents.Height()));
+ break;
+ }
+
+ case OTContainer:
+ {
+ Container * c = (Container *)obj;
+ VPVectorIter i = c->objects.begin();
+ rect = GetObjectExtents((Object *)*i);
+ i++;
+
+ for(; i!=c->objects.end(); i++)
+ rect |= GetObjectExtents((Object *)*i);
+ }
+
+ default:
+ break;
+ }
+
+ return rect;
+}
+
+void DrawingView::CheckObjectBounds(void)
+{
+ VPVectorIter i;
+
+ for(i=document.objects.begin(); i!=document.objects.end(); i++)
+ {
+ Object * obj = (Object *)(*i);
+ obj->selected = false;
+
+ switch (obj->type)
+ {
+ case OTLine:
+ case OTDimension: // N.B.: We don't check this properly...
+ {
+ Line * l = (Line *)obj;
+
+ if (Global::selection.contains(l->p[0].x, l->p[0].y) && Global::selection.contains(l->p[1].x, l->p[1].y))
+ l->selected = true;
+
+ break;
+ }
+
+ case OTCircle:
+ {
+ Circle * c = (Circle *)obj;
+
+ if (Global::selection.contains(c->p[0].x - c->radius[0], c->p[0].y - c->radius[0]) && Global::selection.contains(c->p[0].x + c->radius[0], c->p[0].y + c->radius[0]))
+ c->selected = true;
+
+ break;
+ }
+
+ case OTArc:
+ {
+ Arc * a = (Arc *)obj;
+
+ double start = a->angle[0];
+ double end = start + a->angle[1];
+ QPointF p1(cos(start), sin(start));
+ QPointF p2(cos(end), sin(end));
+ QRectF bounds(p1, p2);
+
+#if 1
+ // Swap X/Y coordinates if they're backwards...
+ if (bounds.left() > bounds.right())
+ {
+ double temp = bounds.left();
+ bounds.setLeft(bounds.right());
+ bounds.setRight(temp);
+ }
+
+ if (bounds.bottom() > bounds.top())
+ {
+ double temp = bounds.bottom();
+ bounds.setBottom(bounds.top());
+ bounds.setTop(temp);
+ }
+#else
+ // Doesn't work as advertised! For shame!
+ bounds = bounds.normalized();
+#endif
+
+ // If the end of the arc is before the beginning, add 360 degrees
+ // to it
+ if (end < start)
+ end += TAU;
+
+ // Adjust the bounds depending on which axes are crossed
+ if ((start < QTR_TAU) && (end > QTR_TAU))
+ bounds.setTop(1.0);
+
+ if ((start < HALF_TAU) && (end > HALF_TAU))
+ bounds.setLeft(-1.0);
+
+ if ((start < THREE_QTR_TAU) && (end > THREE_QTR_TAU))
+ bounds.setBottom(-1.0);
+
+ if ((start < TAU) && (end > TAU))
+ bounds.setRight(1.0);
+
+ if ((start < (TAU + QTR_TAU)) && (end > (TAU + QTR_TAU)))
+ bounds.setTop(1.0);
+
+ if ((start < (TAU + HALF_TAU)) && (end > (TAU + HALF_TAU)))
+ bounds.setLeft(-1.0);
+
+ if ((start < (TAU + THREE_QTR_TAU)) && (end > (TAU + THREE_QTR_TAU)))
+ bounds.setBottom(-1.0);
+
+ bounds.setTopLeft(QPointF(bounds.left() * a->radius[0], bounds.top() * a->radius[0]));
+ bounds.setBottomRight(QPointF(bounds.right() * a->radius[0], bounds.bottom() * a->radius[0]));
+ bounds.translate(a->p[0].x, a->p[0].y);
+
+ if (Global::selection.contains(bounds))
+ a->selected = true;
+
+ break;
+ }
+
+ case OTText:
+ {
+ Text * t = (Text *)obj;
+ Rect r(obj->p[0], Point(t->p[0].x + t->extents.Width(), t->p[0].y - t->extents.Height()));
+
+ if (Global::selection.contains(r.l, r.t) && Global::selection.contains(r.r, r.b))
+ t->selected = true;
+
+ break;
+ }
+
+ case OTContainer:
+ {
+ Container * c = (Container *)obj;
+
+ if (Global::selection.contains(c->p[0].x, c->p[0].y) && Global::selection.contains(c->p[1].x, c->p[1].y))
+ c->selected = true;
+
+ break;
+ }
+
+// default:
+// break;
+ }
+ }
+}
+
+bool DrawingView::HitTestObjects(Point point)
+{
+ VPVectorIter i;
+ numHovered = 0;
+ bool needUpdate = false;
+ hoverPointValid = false;
+
+ for(i=document.objects.begin(); i!=document.objects.end(); i++)
+ {
+ Object * obj = (Object *)(*i);
+
+ // If we're seeing the object we're dragging, skip it
+ if (draggingObject && (obj == dragged))
+ continue;
+
+ if (HitTest(obj, point) == true)
+ needUpdate = true;
+
+ if (obj->hovered)
+ {
+ numHovered++;
+//printf("MouseMove: OBJECT HOVERED (numHovered = %i)\n", numHovered);
+ emit ObjectHovered(obj);
+ }
+ }
+
+ return needUpdate;
+}
+
+bool DrawingView::HitTest(Object * obj, Point point)
+{
+ bool needUpdate = false;
+
+ switch (obj->type)
+ {
+ case OTLine:
+ {
+ bool oldHP0 = obj->hitPoint[0], oldHP1 = obj->hitPoint[1], oldHO = obj->hitObject;
+ obj->hitPoint[0] = obj->hitPoint[1] = obj->hitObject = false;
+ Vector lineSegment = obj->p[1] - obj->p[0];
+ Vector v1 = point - obj->p[0];
+ Vector v2 = point - obj->p[1];
+ double t = Geometry::ParameterOfLineAndPoint(obj->p[0], obj->p[1], point);
+ double distance;
+
+ if (t < 0.0)
+ distance = v1.Magnitude();
+ else if (t > 1.0)
+ distance = v2.Magnitude();
+ else
+ // distance = ?Det?(ls, v1) / |ls|
+ distance = fabs((lineSegment.x * v1.y - v1.x * lineSegment.y)
+ / lineSegment.Magnitude());
+
+ if ((v1.Magnitude() * Global::zoom) < 8.0)
+ {
+ obj->hitPoint[0] = true;
+ hoverPoint = obj->p[0];
+ hoverPointValid = true;
+ }
+ else if ((v2.Magnitude() * Global::zoom) < 8.0)
+ {
+ obj->hitPoint[1] = true;
+ hoverPoint = obj->p[1];
+ hoverPointValid = true;
+ }
+ else if ((distance * Global::zoom) < 5.0)
+ obj->hitObject = true;
+
+ obj->hovered = (obj->hitPoint[0] || obj->hitPoint[1] || obj->hitObject ? true : false);
+
+ if ((oldHP0 != obj->hitPoint[0]) || (oldHP1 != obj->hitPoint[1]) || (oldHO != obj->hitObject))
+ needUpdate = true;
+
+ break;
+ }
+
+ case OTCircle:
+ {
+ bool oldHP = obj->hitPoint[0], oldHO = obj->hitObject;
+ obj->hitPoint[0] = obj->hitObject = false;
+ double length = Vector::Magnitude(obj->p[0], point);
+
+ if ((length * Global::zoom) < 8.0)
+ {
+ obj->hitPoint[0] = true;
+ hoverPoint = obj->p[0];
+ hoverPointValid = true;
+ }
+ else if ((fabs(length - obj->radius[0]) * Global::zoom) < 2.0)
+ obj->hitObject = true;
+
+ obj->hovered = (obj->hitPoint[0] || obj->hitObject ? true : false);
+
+ if ((oldHP != obj->hitPoint[0]) || (oldHO != obj->hitObject))
+ needUpdate = true;
+
+ break;
+ }
+
+ case OTArc:
+ {
+ bool oldHP0 = obj->hitPoint[0], oldHP1 = obj->hitPoint[1], oldHP2 = obj->hitPoint[2], oldHO = obj->hitObject;
+ obj->hitPoint[0] = obj->hitPoint[1] = obj->hitPoint[2] = obj->hitObject = false;
+ double length = Vector::Magnitude(obj->p[0], point);
+ double angle = Vector::Angle(obj->p[0], point);
+
+ // Make sure we get the angle in the correct spot
+ if (angle < obj->angle[0])
+ angle += TAU;
+
+ // Get the span that we're pointing at...
+ double span = angle - obj->angle[0];
+
+ // N.B.: Still need to hit test the arc start & arc span handles...
+ double spanAngle = obj->angle[0] + obj->angle[1];
+ Point handle1 = obj->p[0] + (Vector(cos(obj->angle[0]), sin(obj->angle[0])) * obj->radius[0]);
+ Point handle2 = obj->p[0] + (Vector(cos(spanAngle), sin(spanAngle)) * obj->radius[0]);
+ double length2 = Vector::Magnitude(point, handle1);
+ double length3 = Vector::Magnitude(point, handle2);
+
+ if ((length * Global::zoom) < 8.0)
+ {
+ obj->hitPoint[0] = true;
+ hoverPoint = obj->p[0];
+ hoverPointValid = true;
+ }
+ else if ((length2 * Global::zoom) < 8.0)
+ {
+ obj->hitPoint[1] = true;
+ hoverPoint = handle1;
+ hoverPointValid = true;
+ }
+ else if ((length3 * Global::zoom) < 8.0)
+ {
+ obj->hitPoint[2] = true;
+ hoverPoint = handle2;
+ hoverPointValid = true;
+ }
+ else if (((fabs(length - obj->radius[0]) * Global::zoom) < 2.0) && (span < obj->angle[1]))
+ obj->hitObject = true;
+
+ obj->hovered = (obj->hitPoint[0] || obj->hitPoint[1] || obj->hitPoint[2] || obj->hitObject ? true : false);
+
+ if ((oldHP0 != obj->hitPoint[0]) || (oldHP1 != obj->hitPoint[1]) || (oldHP2 != obj->hitPoint[2]) || (oldHO != obj->hitObject))
+ needUpdate = true;
+
+ break;
+ }
+
+ case OTDimension:
+ {
+ bool oldHP0 = obj->hitPoint[0], oldHP1 = obj->hitPoint[1], oldHP2 = obj->hitPoint[2], oldHP3 = obj->hitPoint[3], oldHP4 = obj->hitPoint[4], oldHO = obj->hitObject;
+ obj->hitPoint[0] = obj->hitPoint[1] = obj->hitPoint[2] = obj->hitPoint[3] = obj->hitPoint[4] = obj->hitObject = false;
+
+ Dimension * d = (Dimension *)obj;
+
+ Vector orthogonal = Vector::Normal(d->lp[0], d->lp[1]);
+ // Get our line parallel to our points
+ float scaledThickness = Global::scale * obj->thickness;
+#if 1
+ Point p1 = d->lp[0] + (orthogonal * (d->offset + (10.0 * scaledThickness)));
+ Point p2 = d->lp[1] + (orthogonal * (d->offset + (10.0 * scaledThickness)));
+#else
+ Point p1 = d->lp[0] + (orthogonal * (10.0 + d->offset) * scaledThickness);
+ Point p2 = d->lp[1] + (orthogonal * (10.0 + d->offset) * scaledThickness);
+#endif
+ Point p3(p1, point);
+
+ Vector v1(d->p[0], point);
+ Vector v2(d->p[1], point);
+ Vector lineSegment(p1, p2);
+ double t = Geometry::ParameterOfLineAndPoint(p1, p2, point);
+ double distance;
+ Point midpoint = (p1 + p2) / 2.0;
+ Point hFSPoint = Point(midpoint, point);
+ Point hCS1Point = Point((p1 + midpoint) / 2.0, point);
+ Point hCS2Point = Point((midpoint + p2) / 2.0, point);
+
+ if (t < 0.0)
+ distance = v1.Magnitude();
+ else if (t > 1.0)
+ distance = v2.Magnitude();
+ else
+ // distance = ?Det?(ls, v1) / |ls|
+ distance = fabs((lineSegment.x * p3.y - p3.x * lineSegment.y)
+ / lineSegment.Magnitude());
+
+ if ((v1.Magnitude() * Global::zoom) < 8.0)
+ obj->hitPoint[0] = true;
+ else if ((v2.Magnitude() * Global::zoom) < 8.0)
+ obj->hitPoint[1] = true;
+ else if ((distance * Global::zoom) < 5.0)
+ obj->hitObject = true;
+
+ if ((hFSPoint.Magnitude() * Global::zoom) < 8.0)
+ obj->hitPoint[2] = true;
+ else if ((hCS1Point.Magnitude() * Global::zoom) < 8.0)
+ obj->hitPoint[3] = true;
+ else if ((hCS2Point.Magnitude() * Global::zoom) < 8.0)
+ obj->hitPoint[4] = true;
+
+ obj->hovered = (obj->hitPoint[0] || obj->hitPoint[1] || obj->hitPoint[2] || obj->hitPoint[3] || obj->hitPoint[4] || obj->hitObject ? true : false);
+
+ if ((oldHP0 != obj->hitPoint[0]) || (oldHP1 != obj->hitPoint[1]) || (oldHP2 != obj->hitPoint[2]) || (oldHP3 != obj->hitPoint[3]) || (oldHP4 != obj->hitPoint[4]) || (oldHO != obj->hitObject))
+ needUpdate = true;
+
+ break;
+ }
+
+ case OTText:
+ {
+ Text * t = (Text *)obj;
+ bool oldHO = obj->hitObject;
+ obj->hitObject = false;
+
+ Rect r(obj->p[0], Point(obj->p[0].x + t->extents.Width(), obj->p[0].y - t->extents.Height()));
+//printf("Text: p=<%lf, %lf>, w/h=%lf, %lf [lrtb=%lf, %lf, %lf, %lf]\n", obj->p[0].x, obj->p[0].y, t->extents.Width(), t->extents.Height(), t->extents.l, t->extents.r, t->extents.t, t->extents.b);
+
+ if (r.Contains(point))
+ obj->hitObject = true;
+
+ obj->hovered = (obj->hitObject ? true : false);
+
+ if (oldHO != obj->hitObject)
+ needUpdate = true;
+
+ break;
+ }
+
+ case OTContainer:
+ {
+ // Containers must be recursively tested... Or do they???
+/*
+So the idea here is to flatten the structure, *then* test the objects within. Flattening includes the Containers as well; we can do this because it's pointers all the way down.
+*/
+// bool oldHitObj = c->hitObject, oldHovered = c->hovered;
+// Object * oldClicked = c->clicked;
+/*
+still need to compare old state to new state, and set things up based upon that...
+likely we can just rely on the object itself and steal its state like we have in the commented out portion below; can prolly rewrite the HitTest() portion to be one line: needUpdate = HitTest(cObj, point);
+Well, you could if there was only one object in the Container. But since there isn't, we have to keep the if HitTest() == true then needUpdate = true bit. Because otherwise, a false result anywhere will kill the needed update elsewhere.
+*/
+ Container * c = (Container *)obj;
+ c->hitObject = false;
+ c->hovered = false;
+ c->clicked = NULL;
+
+ VPVector flat = Flatten(c);
+
+//printf("HitTest::OTContainer (size=%li)\n", flat.size());
+ for(VPVectorIter i=flat.begin(); i!=flat.end(); i++)
+ {
+ Object * cObj = (Object *)(*i);
+
+ // Skip the flattened containers (if any)...
+ if (cObj->type == OTContainer)
+ continue;
+
+ // We do it this way instead of needUpdate = HitTest() because we
+ // are checking more than one object, and that way of doing will
+ // not return consistent results.
+ if (HitTest(cObj, point) == true)
+// {
+//printf("HitTest::OTContainer, subobj ($%llX) hit!\n", cObj);
+ needUpdate = true;
+// c->hitObject = true;
+// c->clicked = cObj;
+// c->hovered = true;
+// }
+
+ // Same reasons for doing it this way here apply.
+ if (cObj->hitObject == true)
+ {
+//printf("HitTest::cObj->hitObject == true! ($%llX)\n", cObj);
+ c->hitObject = true;
+ c->clicked = cObj;
+ }//*/
+
+ if (cObj->hitPoint[0] == true)
+ {
+//printf("HitTest::cObj->hitObject == true! ($%llX)\n", cObj);
+ c->hitPoint[0] = true;
+ c->clicked = cObj;
+ }//*/
+
+ if (cObj->hitPoint[1] == true)
+ {
+//printf("HitTest::cObj->hitObject == true! ($%llX)\n", cObj);
+ c->hitPoint[1] = true;
+ c->clicked = cObj;
+ }//*/
+
+ if (cObj->hitPoint[2] == true)
+ {
+//printf("HitTest::cObj->hitObject == true! ($%llX)\n", cObj);
+ c->hitPoint[2] = true;
+ c->clicked = cObj;
+ }//*/
+
+ if (cObj->hovered == true)
+ c->hovered = true;//*/
+ }
+
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ return needUpdate;
+}
+
+bool DrawingView::HandleObjectClicked(void)
+{
+ if (dragged->type == OTDimension)
+ {
+ Dimension * d = (Dimension *)dragged;
+
+ if (d->hitPoint[2])
+ {
+ // Hit the "flip sides" switch, so flip 'em
+ Point temp = d->p[0];
+ d->p[0] = d->p[1];
+ d->p[1] = temp;
+ return true;
+ }
+ else if (d->hitPoint[3])
+ {
+ // There are three cases here: aligned, horizontal, & vertical.
+ // Aligned and horizontal do the same thing, vertical goes back to
+ // linear.
+ if (d->subtype == DTLinearVert)
+ d->subtype = DTLinear;
+ else
+ d->subtype = DTLinearVert;
+
+ return true;
+ }
+ else if (d->hitPoint[4])
+ {
+ // There are three cases here: aligned, horizontal, & vertical.
+ // Aligned and vertical do the same thing, horizontal goes back to
+ // linear.
+ if (d->subtype == DTLinearHorz)
+ d->subtype = DTLinear;
+ else
+ d->subtype = DTLinearHorz;
+
+ return true;
+ }
+ }
+
+ return false;
+}
+
+void DrawingView::HandleObjectMovement(Point point)
+{
+ Point delta = point - oldPoint;
+//printf("HOM: old = (%f,%f), new = (%f, %f), delta = (%f, %f)\n", oldPoint.x, oldPoint.y, point.x, point.y, delta.x, delta.y);
+// Object * obj = (Object *)hover[0];
+ Object * obj = dragged;
+//printf("Object type = %i (size=%i), ", obj->type, hover.size());
+//printf("Object (%X) move: hp1=%s, hp2=%s, hl=%s\n", obj, (obj->hitPoint[0] ? "true" : "false"), (obj->hitPoint[1] ? "true" : "false"), (obj->hitObject ? "true" : "false"));
+
+ switch (obj->type)
+ {
+ case OTLine:
+ if (obj->hitPoint[0])
+ {
+ if (Global::fixedLength)
+ {
+ Vector line = point - obj->p[1];
+ Vector unit = line.Unit();
+ point = obj->p[1] + (unit * obj->length);
+ }
+
+ obj->p[0] = point;
+ }
+ else if (obj->hitPoint[1])
+ {
+ if (Global::fixedLength)
+ {
+ Vector line = point - obj->p[0];
+ Vector unit = line.Unit();
+ point = obj->p[0] + (unit * obj->length);
+ }
+
+ obj->p[1] = point;
+ }
+ else if (obj->hitObject)
+ {
+ obj->p[0] += delta;
+ obj->p[1] += delta;
+ }
+
+ break;
+
+ case OTCircle:
+ if (obj->hitPoint[0])
+ obj->p[0] = point;
+ else if (obj->hitObject)
+ {
+ double oldRadius = obj->length;
+ obj->radius[0] = Vector::Magnitude(obj->p[0], point);
+
+ QString text = QObject::tr("Radius: %1\nScale: %2%");
+ informativeText = text.arg(obj->radius[0], 0, 'd', 4).arg(obj->radius[0] / oldRadius * 100.0, 0, 'd', 0);
+ }
+
+ break;
+
+ case OTArc:
+ if (obj->hitPoint[0])
+ obj->p[0] = point;
+ else if (obj->hitPoint[1])
+ {
+ // Change the Arc's span (handle #1)
+ if (shiftDown)
+ {
+ double angle = Vector::Angle(obj->p[0], point);
+ double delta = angle - obj->angle[0];
+
+ if (delta < 0)
+ delta += TAU;
+
+ obj->angle[1] -= delta;
+ obj->angle[0] = angle;
+
+ if (obj->angle[1] < 0)
+ obj->angle[1] += TAU;
+
+ QString text = QObject::tr("Span: %1") + QChar(0x00B0) + QObject::tr("\n%2") + QChar(0x00B0) + QObject::tr(" - %3") + QChar(0x00B0);
+ informativeText = text.arg(obj->angle[1] * RADIANS_TO_DEGREES, 0, 'd', 4).arg(obj->angle[0] * RADIANS_TO_DEGREES, 0, 'd', 2).arg((obj->angle[0] + obj->angle[1]) * RADIANS_TO_DEGREES, 0, 'd', 2);
+ return;
+ }
+
+ double angle = Vector::Angle(obj->p[0], point);
+ obj->angle[0] = angle;
+ QString text = QObject::tr("Start angle: %1") + QChar(0x00B0);
+ informativeText = text.arg(obj->angle[0] * RADIANS_TO_DEGREES, 0, 'd', 4);
+ }
+ else if (obj->hitPoint[2])
+ {
+ // Change the Arc's span (handle #2)
+ if (shiftDown)
+ {
+ double angle = Vector::Angle(obj->p[0], point);
+ obj->angle[1] = angle - obj->angle[0];
+
+ if (obj->angle[1] < 0)
+ obj->angle[1] += TAU;
+
+ QString text = QObject::tr("Span: %1") + QChar(0x00B0) + QObject::tr("\n%2") + QChar(0x00B0) + QObject::tr(" - %3") + QChar(0x00B0);
+ informativeText = text.arg(obj->angle[1] * RADIANS_TO_DEGREES, 0, 'd', 4).arg(obj->angle[0] * RADIANS_TO_DEGREES, 0, 'd', 2).arg((obj->angle[0] + obj->angle[1]) * RADIANS_TO_DEGREES, 0, 'd', 2);
+ return;
+ }
+
+ double angle = Vector::Angle(obj->p[0], point);
+ obj->angle[0] = angle - obj->angle[1];
+
+ if (obj->angle[0] < 0)
+ obj->angle[0] += TAU;
+
+ QString text = QObject::tr("End angle: %1") + QChar(0x00B0);
+ informativeText = text.arg((obj->angle[0] + obj->angle[1]) * RADIANS_TO_DEGREES, 0, 'd', 4);
+ }
+ else if (obj->hitObject)
+ {
+ if (shiftDown)
+ {
+ return;
+ }
+
+ obj->radius[0] = Vector::Magnitude(obj->p[0], point);
+ QString text = QObject::tr("Radius: %1");
+ informativeText = text.arg(obj->radius[0], 0, 'd', 4);
+ }
+
+ break;
+
+ case OTDimension:
+ if (obj->hitPoint[0])
+ obj->p[0] = point;
+ else if (obj->hitPoint[1])
+ obj->p[1] = point;
+ else if (obj->hitObject)
+ {
+ // Move measurement lines in/out
+ if (shiftDown)
+ {
+ Dimension * d = (Dimension *)obj;
+ double dist = Geometry::DistanceToLineFromPoint(d->lp[0], d->lp[1], point);
+ float scaledThickness = Global::scale * obj->thickness;
+ // Looks like offset is 0 to +MAX, but line is at 10.0. So
+ // anything less than 10.0 should set the offset to 0.
+ d->offset = 0;
+
+ if (dist > (10.0 * scaledThickness))
+ d->offset = dist - (10.0 * scaledThickness);
+ }
+ else
+ {
+ obj->p[0] += delta;
+ obj->p[1] += delta;
+ }
+ }
+
+ break;
+
+ case OTText:
+ if (obj->hitObject)
+ obj->p[0] += delta;
+
+ break;
+
+ case OTContainer:
+ // This is shitty, but works for now until I can code up something
+ // nicer :-)
+/*
+The idea is to make it so whichever point on the object in question is being dragged becomes the snap point for the container; shouldn't be too difficult to figure out how to do this.
+*/
+// TranslateObject(obj, delta);
+ TranslateContainer((Container *)obj, point, delta);
+
+ break;
+ default:
+ break;
+ }
+}
+
+void DrawingView::AddDimensionTo(void * o)
+{
+ Object * obj = (Object *)o;
+
+ switch (obj->type)
+ {
+ case OTLine:
+ document.Add(new Dimension(obj->p[0], obj->p[1]));
+ break;
+ case OTCircle:
+ break;
+ case OTEllipse:
+ break;
+ case OTArc:
+ break;
+ case OTSpline:
+ break;
+ }
+}