// F1DE00 R xxxxxxxx xxxxxxxx ROM_NOISE - white noise
// ------------------------------------------------------------
+#include "jerry.h"
+
+#include <string.h> // For memcpy
//#include <math.h>
+#include "cdrom.h"
+#include "dac.h"
+#include "dsp.h"
+#include "eeprom.h"
+#include "event.h"
#include "jaguar.h"
+#include "joystick.h"
+#include "log.h"
#include "wavetable.h"
-#include "jerry.h"
-#include "clock.h"
//Note that 44100 Hz requires samples every 22.675737 usec.
#define NEW_TIMER_SYSTEM
//#define JERRY_DEBUG
-/*static*/ uint8 * jerry_ram_8;
+/*static*/ uint8 jerry_ram_8[0x10000];
//#define JERRY_CONFIG 0x4002 // ??? What's this ???
//This approach is probably wrong, since the timer is continuously counting down, though
//it might only be a problem if the # of interrupts generated is greater than 1--the M68K's
//timeslice should be running during that phase... (The DSP needs to be aware of this!)
-void jerry_i2s_exec(uint32 cycles)
+
+//This is only used by the old system, so once the new timer system is working this
+//should be safe to nuke.
+void JERRYI2SExec(uint32 cycles)
{
#ifndef NEW_TIMER_SYSTEM
extern uint16 serialMode; // From DAC.CPP
{
// Why is it called this? Instead of SCLK? Shouldn't this be read from DAC.CPP???
//Yes, it should. !!! FIX !!!
+#warning Yes, it should. !!! FIX !!!
jerry_i2s_interrupt_divide &= 0xFF;
// We don't have to divide the RISC clock rate by this--the reason is a bit
// convoluted. Will put explanation here later...
}
jerry_i2s_interrupt_timer += 602;
}*/
+
+ if (ButchIsReadyToSend())//Not sure this is right spot to check...
+ {
+// return GetWordFromButchSSI(offset, who);
+ SetSSIWordsXmittedFromButch();
+ DSPSetIRQLine(DSPIRQ_SSI, ASSERT_LINE);
+ }
+
+ SetCallbackTime(JERRYI2SCallback, 22.675737);
}
}
-void jerry_init(void)
+void JERRYInit(void)
{
// clock_init();
// anajoy_init();
- joystick_init();
+ JoystickInit();
DACInit();
//This should be handled with the cart initialization...
// eeprom_init();
- memory_malloc_secure((void **)&jerry_ram_8, 0x10000, "JERRY RAM/ROM");
+// memory_malloc_secure((void **)&jerry_ram_8, 0x10000, "JERRY RAM/ROM");
memcpy(&jerry_ram_8[0xD000], wave_table, 0x1000);
JERRYPIT1Prescaler = 0xFFFF;
JERRYPIT2Divider = 0xFFFF;
}
-void jerry_reset(void)
+void JERRYReset(void)
{
// clock_reset();
// anajoy_reset();
- joystick_reset();
- eeprom_reset();
+ JoystickReset();
+ EepromReset();
JERRYResetI2S();
DACReset();
jerry_timer_2_counter = 0;
}
-void jerry_done(void)
+void JERRYDone(void)
{
WriteLog("JERRY: M68K Interrupt control ($F10020) = %04X\n", GET16(jerry_ram_8, 0x20));
- memory_free(jerry_ram_8);
+// memory_free(jerry_ram_8);
// clock_done();
// anajoy_done();
- joystick_done();
+ JoystickDone();
DACDone();
- eeprom_done();
+ EepromDone();
}
bool JERRYIRQEnabled(int irq)
{
- // Read the word @ $F10020
+ // Read the word @ $F10020
return jerry_ram_8[0x21] & (1 << irq);
}
// else if (offset >= 0xF17C00 && offset <= 0xF17C01)
// return anajoy_byte_read(offset);
else if (offset >= 0xF14000 && offset <= 0xF14003)
- return joystick_byte_read(offset) | eeprom_byte_read(offset);
+ return JoystickReadByte(offset) | EepromReadByte(offset);
else if (offset >= 0xF14000 && offset <= 0xF1A0FF)
- return eeprom_byte_read(offset);
-
+ return EepromReadByte(offset);
+
return jerry_ram_8[offset & 0xFFFF];
}
// else if ((offset >= 0xF17C00) && (offset <= 0xF17C01))
// return anajoy_word_read(offset);
else if (offset == 0xF14000)
- return (joystick_word_read(offset) & 0xFFFE) | eeprom_word_read(offset);
+ return (JoystickReadWord(offset) & 0xFFFE) | EepromReadWord(offset);
else if ((offset >= 0xF14002) && (offset < 0xF14003))
- return joystick_word_read(offset);
+ return JoystickReadWord(offset);
else if ((offset >= 0xF14000) && (offset <= 0xF1A0FF))
- return eeprom_word_read(offset);
+ return EepromReadWord(offset);
/*if (offset >= 0xF1D000)
WriteLog("JERRY: Reading word at %08X [%04X]...\n", offset, ((uint16)jerry_ram_8[(offset+0)&0xFFFF] << 8) | jerry_ram_8[(offset+1)&0xFFFF]);//*/
jerry_i2s_interrupt_divide = (jerry_i2s_interrupt_divide & 0xFF00) | (uint32)data;
jerry_i2s_interrupt_timer = -1;
+#ifndef NEW_TIMER_SYSTEM
jerry_i2s_exec(0);
+#else
+ RemoveCallback(JERRYI2SCallback);
+ JERRYI2SCallback();
+#endif
// return;
}
// LTXD/RTXD/SCLK/SMODE $F1A148/4C/50/54 (really 16-bit registers...)
else if (offset >= 0xF1A148 && offset <= 0xF1A157)
- {
+ {
DACWriteByte(offset, data, who);
- return;
+ return;
}
else if (offset >= 0xF10000 && offset <= 0xF10007)
{
}*/
else if ((offset >= 0xF14000) && (offset <= 0xF14003))
{
- joystick_byte_write(offset, data);
- eeprom_byte_write(offset, data);
+ JoystickWriteByte(offset, data);
+ EepromWriteByte(offset, data);
return;
}
else if ((offset >= 0xF14000) && (offset <= 0xF1A0FF))
{
- eeprom_byte_write(offset, data);
+ EepromWriteByte(offset, data);
return;
}
//This should *only* be enabled when SMODE has its INTERNAL bit set! !!! FIX !!!
jerry_i2s_interrupt_divide = (uint8)data;
jerry_i2s_interrupt_timer = -1;
+#ifndef NEW_TIMER_SYSTEM
jerry_i2s_exec(0);
+#else
+ RemoveCallback(JERRYI2SCallback);
+ JERRYI2SCallback();
+#endif
DACWriteWord(offset, data, who);
- return;
+ return;
}
// LTXD/RTXD/SCLK/SMODE $F1A148/4C/50/54 (really 16-bit registers...)
else if (offset >= 0xF1A148 && offset <= 0xF1A156)
- {
+ {
DACWriteWord(offset, data, who);
- return;
+ return;
}
else if (offset >= 0xF10000 && offset <= 0xF10007)
{
}*/
else if (offset >= 0xF14000 && offset < 0xF14003)
{
- joystick_word_write(offset, data);
- eeprom_word_write(offset, data);
+ JoystickWriteWord(offset, data);
+ EepromWriteWord(offset, data);
return;
}
else if (offset >= 0xF14000 && offset <= 0xF1A0FF)
{
- eeprom_word_write(offset, data);
+ EepromWriteWord(offset, data);
return;
}