--- title: Controlling Ardour with OSC ---

OSC lets synthesizers and other devices communicate with Ardour. OSC devices can send commands relating to playback (such as play or stop), performance (such as volume, play, stop, and almost any other function (such as Edit, or Undo).

Note: OSC control has changed dramatically since Ardour 4.7. The Path structure has been completely redone, Banking has been introduced, The controller is now able to tell Ardour what kind of feedback it can work with (including bank size) and two new math styles have been added to gain controls. If you are using an Ardour version of 4.7 or less, please read Osc control in ardour 4.7 and prior.

Ardour is probably one of the most OSC-controllable audio applications around, but as with all OSC-controllable apps, you can't do much without knowing what messages can be sent. This document describes the various categories of messages that Ardour understands. It is subject to change, particularly the "Actions" part below, since this relates to the GTK GUI for Ardour rather than the backend.

Connecting to Ardour via OSC

OSC support is not enabled by default, but can be turned on via Edit > Preferences > Control Surfaces. Once enabled, Ardour will listen on port 3819 by default. This port number can be changed by editing $ARDOUR_CONFIG and adding this line within the <Config> section:

<Option name="osc-port" value="Your choice here"/>

Ardour sends any feedback to the port and address that sent any feedback request. The port does not have to match Ardour's port. In fact it is better not to. This means that Ardour can deal with more than one controller at a time. The two controllers can bank independently and even use different math for faders. This could be used to allow talent to adjust their own monitor mix using a tablet or phone that can run an OSC controller. For a full explanation of how Ardour's feedback works please read OSC feedback In Ardour.

Control Surface Set Up

Control surface set up allows the controller to tell Ardour about it's capabilities. The surface can tell Ardour how many control strips it has for banking, if it is capable of setting it's faders or buttons to values set by Ardour's GUI or automation, What kind of math the faders use and more.

Any time the /set_surface command is sent, the current bank is recalculated and if feedback is turned on, the values of each strip's controls are sent (or refreshed) as well. This will also refresh the Master feedback setup.

Surface Port Setting is available in the OSC GUI.

As of Ardour 5.1, There is now a GUI setup in response to those using tablets with applications such as touchOSC or AndrOSC who need to be able to set a port for Ardour to send to. It can also change the default setting for set_surface. For more information about Ardour's OSC configuration GUI please read Ardour's Setup Dialog.

If /set_surface is not sent, the default values are used:

Bank Size: 0—No banking (or infinite bank size).
Strip Types: All strip types except hidden and special.
Feedback: 0—All off.
Fader Mode: 0—gain in dB (not relevant with feedback off)

These values give the same behaviour as prior versions of Ardour. (or the closest possible)

/set_surface bank_size strip_types feedback fadermode: See below for an explanation of each parameter.

bank_size

Bank Size is the number of channel strips the controller supports without banking. Setting this to 0 turns banking off by setting the bank size to infinite.

Bank size can also be set with /set_surface/bank_size size.

strip_types

strip_types is an integer made up of bits. The easy way to deal with this is to think of strip_types items being worth a number and then adding all those numbers together for a value to send. Strip Types will determine what kind of strips will be included in bank. This would include: Audio, MIDI, buses, VCAs, Master, Monitor and hidden or selected strips.

Aside from setting the track types for the main mix assignments, using /set_surface/strip_types with more than one surface button will allow switching between modes for example: inputs only, buses only, selected only, hidden only, by having the buttons send values of: 3, 12, 256, 512. A full mix button might have a value 31.

While Master and Monitor are listed as possibilities, most surfaces will not use them. Using /master and /monitor makes more sense. However, in the case where there are no master or monitor fader strips on the surface, it may be necessary to include them in the banked strips.

Please see: Calculating Feedback and Strip-types Values.

Strip types can also be set with /set_surface/strip_types types.

feedback

Feedback is an integer made up of bits. The easy way to deal with this is to think of feedback items being worth a number and then adding all those numbers together for a value to send.

Please see: Calculating Feedback and Strip-types Values.

Feedback can also be set with /set_surface/feedback feedback.

gainmode

Gainmode is a an int that acts as a bool:

0 (or false) dB value as a float from -193 to +6. Sent as /strip/gain SSID value. (-193 or below are the same as -inf)
1 (or true) A positional fader based on the same math as Ardour's GUI. An Float from 0 to 1. Sent as /strip/fader SSID value

Gainmode applies only to feedback values. The controller can choose which gain math to use by choosing to use the /*/gain or /*/fader path to send to Ardour. This makes sure a controller that doesn't set up Ardour's OSC can still use either math. The gainmode for feedback also determines the path Ardour uses for feedback so that the feedback messages match the control messages.

Gain mode can also be set with /set_surface/gainmode gainmode.

Querying Ardour for information

The control Surface may wish to control the type a frequency of updates it receives. It can do this with querying commands. See: Querying Ardour with OSC.

List of OSC messages

Parameter types show how the value will be used. However, they may be sent as a different type if needed, see: Parameter Types in OSC.

Master or Global messages

Transport Control

/transport_stop
/transport_play
/toggle_roll: Toggles between play and stop
/set_transport_speed s: where s is a float ranging from -8.0f to 8.0f
/ffwd
/rewind
/goto_start
/goto_end
/jump_bars bars: Where bars is a float (+/-) of the number of bars to jump
/jump_seconds seconds: Where seconds is a float (+/-) of the number of seconds to jump
/add_marker: (adds marker to the current transport position)
/remove_marker: Removes marker at the current transport position (if there is one)
/mark_in: Marks the begining of a range at the current transport position
/mark_out: Marks the end of a range at the current transport position
/next_marker
/prev_marker
/locate spos roll: where spos is the target position in samples and roll is a bool/integer defining whether you want transport to be kept rolling or not
/loop_toggle
/loop_location start end: start is the beginning of a loop and end is the end of a loop both are integer frame positions.
/set_loop_range: Uses edit range as loop range
/set_session_range: Uses edit range as session range
/toggle_click
/midi_panic: Ardour will send an all notes off to all midi tracks
/cancel_all_solos: Cancel All Solos/PFLs/AFLs

Transport Information

/transport_frame: Ardour sends /transport_frame current_frame
/transport_speed: Ardour sends /transport_speed speed
/record_enabled: Ardour sends /record_enabled recordenable_status

Editing-related

/undo
/redo
/save_state: (this is the regular Session > Save operation)
/quick_snapshot_switch: Take a snapshot and switch to new version
/quick_snapshot_stay: Take a snapshot and keep working on this version
/fit_*_track(s): Were * is one of 1, 2, 4, 8, 16, 32 or all. Fits this many tracks in editor window. (add s for more than 1)
/zoom_*: Zoom editor to include * where * is 100_ms, 1_sec, 10_sec, 1_min, 5_min, 10_min or to_session
/temporal_zoom_in: Zoom editor in to show less time
/temporal_zoom_out: Zoom editor out to show more time
/scroll_up_1_track: Scroll the editor pane up 1 track
/scroll_up_1_page: Scroll the editor pane up 1 page
/scroll_dn_1_track: Scroll the editor pane down 1 track
/scroll_dn_1_page: Scroll the editor pane down 1 page

Recording control

/toggle_punch_in
/toggle_punch_out
/set_punch_range: Uses edit range as punch range
/rec_enable_toggle
/stop_forget: Stop transport and delete/forget last take

Master and Monitor strip control

/master/gain dB: See gain in strips
/master/fader position: See fader in strips
/master/trimdB dB: see trimdb in strips
/master/pan_stereo_position position: See pan_stereo_position in strips
/master/mute yn: See mute in strips
/monitor/gain dB: See gain in strips
/monitor/fader position: See fader in strips

Track specific operations

For each of the following, ssid is the Surface Strip ID for the track

SSID has a different meaning than RID in Ardour version 4.7 and before. Effectively, banking is always being used and the SSID is generated on the fly. The SSID is the position of the strip within bank as an int 1 to bank size. There are no gaps as there have been in the past. Depending on the value of strip_types sent to Ardour, Master and Monitor, may be included in the list of SSIDs or not as set in /set_surface.

Some Surfaces (many Android applets) are not able to deal with more than one parameter in a command. However, the two parameter commands below can also be sent as /strip/command/ssid param. In this case the param should be a float even if an int is required below.

/bank_up: Change bank to the next higher bank.
/bank_down: Change bank to the next lower bank.
/strip/mute ssid mute_st: where mute_st is a bool/int representing the desired mute state of the track
/strip/solo ssid solo_st: where solo_st is a bool/int representing the desired solo state of the track
/strip/solo_iso ssid state: where state is a bool/int representing the desired solo isolate state of the track
/strip/solo_safe ssid state: where state is a bool/int representing the desired solo safe/lock state of the track
/strip/monitor_input ssid monitor_st: where monitor_st is a bool/int where 1 is forced input monitoring.
/strip/monitor_disk ssid monitor_st: where monitor_st is a bool/int where 1 is forced disk monitoring. When input and disk are both off, Auto monitoring is enabled.
/strip/recenable ssid rec_st: where rec_st is a bool/int representing the desired rec state of the track
/strip/record_safe ssid rec_st: where rec_st is a bool/int representing the desired record safe state of the track
/strip/polarity ssid invert: where invert is a bool/int representing the desired polarity of the track
/strip/gain ssid gain: where gain is a float ranging from -193 to 6 representing the desired gain of the track in dB.
/strip/fader ssid position: where position is a float ranging from 0 to 1 representing the fader control position.
/strip/trimdB ssid trim_db: where trim_db is a float ranging from -20 to 20 representing the desired trim of the track in dB.
/strip/pan_stereo_position ssid position: where position is a float ranging from 0 to 1 representing the desired pan position of the track
/strip/pan_stereo_width ssid width: where width is a float ranging from 0 to 1 representing the desired pan width of the track
/strip/send/gain ssid sendid send_gain: where sendid = nth_send, send_gain is a float ranging from -193 to +6 representing the desired gain in dB for the send
/strip/send/fader ssid sendid send_gain: where sendid = nth_send, send_gain is a float ranging from 0 to 1 representing the desired position for the send as a fader
/strip/send/enable ssid sendid state: where sendid = nth_send, state is 1 for enabled and 0 for disabled
/strip/list: see: Querying Ardour with OSC.
/strip/sends ssid: see: Querying Ardour with OSC.
/strip/receives ssid: see: Querying Ardour with OSC.
/strip/plugin/list ssid: see: Querying Ardour with OSC.
/strip/plugin/descriptor ssid: see: Querying Ardour with OSC.
/strip/plugin/reset ssid piid: where piid = nth Plugin, will reset all values to the plugin's original values
/strip/plugin/activate ssid piid: where piid = nth Plugin, will set the plugin's state to active
/strip/plugin/deactivate ssid piid: where piid = nth Plugin, will set the plugin's state to inactive
/strip/plugin/parameter ssid piid param value: where piid = nth Plugin, param = nth param, value is a float ranging from 0 to 1 representing the desired parameter value
/strip/name ssid name: where name is a string for the desired name of the track

Selected Strip Operations

New for Ardour 5, A whole set of operations that work on the selected or expanded strip.

Selected strip operations are complex enough for their own page. Please read: Selection Considerations in OSC. This is most important if more than one OSC surface is being used with Ardour.

There are two kinds of selection in OSC. GUI selection and local expansion. By default expansion follows selection.

GUI selection: Use /strip/select to set. Selecting a strip in the GUI will set OSC surface select and the surface will set GUI selection as well.
Local expansion: Use /strip/expand to expand a strip without changing overall selection. When /strip/expand is set to 0 or false, the select channel will go back to using the strip selected by the GUI. While expand is turned on, selecting a strip on the GUI does not select the OSC strip. Sending a /strip/select message will override the expand as if it had been set to false. Good for more than one OSC controller at a time.

/strip/select ssid y/n: Where y/n = 1 for select. Sets both GUI select and strip to expanded mode. (0 is ignored)
/strip/expand ssid y/n: Where y/n = 1 for expanded mode. Sets only local strip to Expanded. Setting to 0 resets the expansion to follow selection.
/select/expand y/n: Where y/n = 1 for expanded mode, 0 for Select mode.
/select/recenable y/n: Where y/n is 1 for enabled and 0 for disabled
/select/record_safe y/n: Where y/n is 1 for safe and 0 for unlocked
/select/mute y/n: Where y/n is 1 for enabled and 0 for disabled
/select/solo y/n: Where y/n is 1 for enabled and 0 for disabled
/select/solo_iso state: where state is a bool/int representing the desired solo isolate state of the track
/select/solo_safe state: where state is a bool/int representing the desired solo safe/lock state of the track
/select/monitor_input y/n: Where y/n is 1 for monitor from input and 0 for auto
/select/monitor_disk y/n: Where y/n is 1 for monitor from disk and 0 for auto
/select/polarity invert: where invert is a bool/int representing the desired polarity of the track
/select/gain gain: Where gain is a float ranging from -193 to 6 representing the desired gain of the track in dB.
/select/fader position: Where position is an float ranging from 0 to 1 representing the fader control position.
/select/trimdB trim_db: where trim_db is a float ranging from -20 to 20 representing the desired trim of the track in dB.
/select/pan_stereo_position position: where position is a float ranging from 0 to 1 representing the desired pan position of the track
/select/pan_stereo_width width: where width is a float ranging from 0 to 1 representing the desired pan width of the track
/select/pan_elevation_position position: where position is a float ranging from 0 to 1 representing the desired pan elevation of the track
/select/pan_frontback_position position: where position is a float ranging from 0 to 1 representing the desired front to back position of the track
/select/pan_lfe_control value: where value is a float ranging from 0 to 1 representing the desired LFE control value for the track
/select/send_gain", sendid send_gain: where sendid = nth_send, send_gain is a float ranging from -193 to +6 representing the desired gain in dB for the send
/select/send_fader", sendid send_gain: where sendid = nth_send, send_gain is a float ranging from 0 to 1 representing the desired position for the send as a fader
/select/send_enable", sendid state: where sendid = nth_send, state is 1 for enabled and 0 for disabled

Menu actions

Every single menu item in Ardour's GUI is accessible via OSC. There is a single common syntax to trigger the action as if it was selected with the mouse (or keyboard):

/access_action action_name

The list below shows all available values of action-name as of June 2016 for Ardour 5.0.pre0.1. You can get the current list at any time by running Ardour with the -b flag.

Action Name: Menu Name
ProcessorMenu/ab_plugins: A/B Plugins
ProcessorMenu/activate_all: Activate All
ProcessorMenu/clear: Clear (all)
ProcessorMenu/clear_post: Clear (post-fader)
ProcessorMenu/clear_pre: Clear (pre-fader)
ProcessorMenu/controls: Controls
ProcessorMenu/copy: Copy
ProcessorMenu/cut: Cut
ProcessorMenu/deactivate_all: Deactivate All
ProcessorMenu/delete: Delete
ProcessorMenu/deselectall: Deselect All
ProcessorMenu/edit-generic: Edit with generic controls...
ProcessorMenu/edit: Edit...
ProcessorMenu/newaux: New Aux Send ...
ProcessorMenu/newinsert: New Insert
ProcessorMenu/newplugin: New Plugin
ProcessorMenu/newsend: New External Send ...
ProcessorMenu/paste: Paste
ProcessorMenu/rename: Rename
ProcessorMenu/selectall: Select All
ProcessorMenu/send_options: Send Options
Common/Hide
Common/NewMIDITracer: MIDI Tracer
Common/Quit: Quit
Common/Save: Save
Common/ToggleMaximalEditor: Maximize Editor Space
Common/ToggleMaximalMixer
Common/ToggleMixerList
Common/ToggleMonitorSection
Common/ToggleRecordEnableTrack10: Toggle Record Enable Track 10
Common/ToggleRecordEnableTrack11: Toggle Record Enable Track 11
Common/ToggleRecordEnableTrack12: Toggle Record Enable Track 12
Common/ToggleRecordEnableTrack13: Toggle Record Enable Track 13
Common/ToggleRecordEnableTrack14: Toggle Record Enable Track 14
Common/ToggleRecordEnableTrack15: Toggle Record Enable Track 15
Common/ToggleRecordEnableTrack16: Toggle Record Enable Track 16
Common/ToggleRecordEnableTrack17: Toggle Record Enable Track 17
Common/ToggleRecordEnableTrack18: Toggle Record Enable Track 18
Common/ToggleRecordEnableTrack19: Toggle Record Enable Track 19
Common/ToggleRecordEnableTrack1: Toggle Record Enable Track 1
Common/ToggleRecordEnableTrack20: Toggle Record Enable Track 20
Common/ToggleRecordEnableTrack21: Toggle Record Enable Track 21
Common/ToggleRecordEnableTrack22: Toggle Record Enable Track 22
Common/ToggleRecordEnableTrack23: Toggle Record Enable Track 23
Common/ToggleRecordEnableTrack24: Toggle Record Enable Track 24
Common/ToggleRecordEnableTrack25: Toggle Record Enable Track 25
Common/ToggleRecordEnableTrack26: Toggle Record Enable Track 26
Common/ToggleRecordEnableTrack27: Toggle Record Enable Track 27
Common/ToggleRecordEnableTrack28: Toggle Record Enable Track 28
Common/ToggleRecordEnableTrack29: Toggle Record Enable Track 29
Common/ToggleRecordEnableTrack2: Toggle Record Enable Track 2
Common/ToggleRecordEnableTrack30: Toggle Record Enable Track 30
Common/ToggleRecordEnableTrack31: Toggle Record Enable Track 31
Common/ToggleRecordEnableTrack32: Toggle Record Enable Track 32
Common/ToggleRecordEnableTrack3: Toggle Record Enable Track 3
Common/ToggleRecordEnableTrack4: Toggle Record Enable Track 4
Common/ToggleRecordEnableTrack5: Toggle Record Enable Track 5
Common/ToggleRecordEnableTrack6: Toggle Record Enable Track 6
Common/ToggleRecordEnableTrack7: Toggle Record Enable Track 7
Common/ToggleRecordEnableTrack8: Toggle Record Enable Track 8
Common/ToggleRecordEnableTrack9: Toggle Record Enable Track 9
Common/attach-editor
Common/attach-mixer
Common/attach-preferences
Common/change-editor-visibility
Common/change-mixer-visibility
Common/change-preferences-visibility
Common/Chat: Chat
Common/cheat-sheet
Common/detach-editor
Common/detach-mixer
Common/detach-preferences
Common/forums
Common/hide-editor
Common/hide-mixer
Common/hide-preferences
Common/howto-report
Common/key-change-editor-visibility
Common/key-change-mixer-visibility
Common/key-change-preferences-visibility
Common/Manual: Manual
Common/menu-show-preferences
Common/next-tab
Common/previous-tab
Common/Reference: Reference
Common/show-editor
Common/show-mixer
Common/show-preferences
Common/toggle-editor-mixer: Toggle Editor+Mixer
Common/toggle-luawindow
Common/toggle-meterbridge: Meterbridge
Common/tracker
Common/website
Common/website-dev
MIDI/panic: Panic
Main/AddLuaScript
Main/AddTrackBus: Add Track or Bus...
Main/CleanupPeakFiles
Main/CleanupUnused: Clean-up Unused Sources...
Main/Close: Close
Main/CloseVideo: Remove Video
Main/EditMetadata: Edit Metadata...
Main/Escape
Main/ExportAudio: Export To Audio File(s)...
Main/Export: Export
Main/ExportVideo: Export To Video File
Main/FlushWastebasket: Flush Wastebasket
Main/ImportMetadata: Import Metadata...
Main/Metadata: Metadata
Main/New: New...
Main/Open: Open...
Main/OpenVideo: Open Video
Main/QuickSnapshotStay
Main/QuickSnapshotSwitch
Main/Recent: Recent...
Main/RemoveLuaScript
Main/Rename: Rename...
Main/SaveAs: Save As...
Main/SaveTemplate: Save Template...
Main/Scripting
Main/SnapshotStay
Main/SnapshotSwitch
Main/StemExport: Stem export...
Main/cancel-solo
Main/duplicate-routes
Main_menu/AudioFileFormatData: Sample Format
Main_menu/AudioFileFormatHeader: File Type
Main_menu/AudioFileFormat: Audio File Format
Main_menu/Cleanup: Clean-up
Main_menu/ControlSurfaces: Control Surfaces
Main_menu/Denormals: Denormal Handling
Main_menu/Help: Help
Main_menu/KeyMouseActions: Misc. Shortcuts
Main_menu/MeteringFallOffRate: Fall Off Rate
Main_menu/MeteringHoldTime: Hold Time
Main_menu/Metering: Metering
Main_menu/MixerMenu
Main_menu/Plugins: Plugins
Main_menu/PrefsMenu
Main_menu/Session: Session
Main_menu/Sync: Sync
Main_menu/TransportOptions: Options
Main_menu/WindowMenu: Window
options/SendMidiClock: Send MIDI Clock
options/SendMIDIfeedback: Send MIDI Feedback
options/SendMMC: Send MMC
options/SendMTC: Send MTC
options/UseMMC: Use MMC
Transport/ForwardFast: Forward (Fast)
Transport/Forward: Forward
Transport/ForwardSlow: Forward (Slow)
Transport/GotoEnd: Goto End
Transport/GotoStart: Goto Start
Transport/GotoWallClock: Goto Wall Clock
Transport/GotoZero: Goto Zero
Transport/Loop: Play Loop Range
Transport/PlayPreroll: Play Selection w/Preroll
Transport/PlaySelection: Play Selected Range
Transport/Record: Enable Record
Transport/RewindFast: Rewind (Fast)
Transport/Rewind: Rewind
Transport/RewindSlow: Rewind (Slow)
Transport/Roll: Roll
Transport/Stop: Stop
Transport/ToggleAutoInput: Auto Input
Transport/ToggleAutoPlay: Auto Play
Transport/ToggleAutoReturn: Auto Return
Transport/ToggleClick: Click
Transport/ToggleExternalSync
Transport/ToggleFollowEdits: Follow Edits
Transport/TogglePunchIn: Punch In
Transport/TogglePunch: Punch In/Out
Transport/TogglePunchOut: Punch Out
Transport/ToggleRollForgetCapture: Stop and Forget Capture
Transport/ToggleRoll: Start/Stop
Transport/ToggleRollMaybe: Start/Continue/Stop
Transport/ToggleTimeMaster: Time Master
Transport/ToggleVideoSync: Sync Startup to Video
Transport/TransitionToReverse: Transition To Reverse
Transport/TransitionToRoll: Transition To Roll
Transport/Transport: Transport
Transport/alternate-GotoStart
Transport/alternate-ToggleRoll
Transport/alternate-numpad-decimal
Transport/alternate-record-roll
Transport/focus-on-clock: Focus On Clock
Transport/numpad-0
Transport/numpad-1
Transport/numpad-2
Transport/numpad-3
Transport/numpad-4
Transport/numpad-5
Transport/numpad-6
Transport/numpad-7
Transport/numpad-8
Transport/numpad-9
Transport/numpad-decimal
Transport/primary-clock-bbt: Bars & Beats
Transport/primary-clock-minsec: Minutes & Seconds
Transport/primary-clock-samples: Samples
Transport/primary-clock-timecode: Timecode
Transport/record-roll: Start Recording
Transport/secondary-clock-bbt: Bars & Beats
Transport/secondary-clock-minsec: Minutes & Seconds
Transport/secondary-clock-samples: Samples
Transport/secondary-clock-timecode: Timecode
Window/toggle-about: About
Window/toggle-add-routes: Add Tracks/Busses
Window/toggle-add-video: Add Tracks/Busses
Window/toggle-audio-connection-manager: Audio Connections
Window/toggle-audio-midi-setup: Audio/MIDI Setup
Window/toggle-big-clock: Big Clock
Window/toggle-bundle-manager: Bundle Manager
Window/toggle-inspector: Tracks and Busses
Window/toggle-key-editor: Key Bindings
Window/toggle-locations: Locations
Window/toggle-midi-connection-manager: MIDI Connections
Window/toggle-script-manager
Window/toggle-session-options-editor: Properties
Window/toggle-speaker-config: Speaker Configuration
Window/toggle-video-export
Editor/SnapMode: Snap Mode
Editor/SnapTo: Snap to
Editor/ToggleGroupTabs: Show Group Tabs
Editor/ToggleJadeo: Video Monitor
Editor/ToggleMeasureVisibility: Show Measures
Editor/ToggleSummary: Show Summary
Editor/add-location-from-playhead: Add Mark from Playhead
Editor/addExistingAudioFiles: Import
Editor/addExistingPTFiles
Editor/addExternalAudioToRegionList: Import to Region List...
Editor/alt-finish-range
Editor/alt-start-range
Editor/alternate-add-location-from-playhead
Editor/alternate-alternate-redo
Editor/alternate-editor-delete
Editor/alternate-jump-backward-to-mark
Editor/alternate-jump-forward-to-mark
Editor/alternate-redo
Editor/alternate-remove-location-from-playhead
Editor/alternate-select-all-after-edit-cursor
Editor/alternate-select-all-before-edit-cursor
Editor/alternate-tab-to-transient-backwards
Editor/alternate-tab-to-transient-forwards
Editor/bring-into-session
Editor/center-edit-cursor: Center Edit Point
Editor/center-playhead: Center Playhead
Editor/crop: Crop
Editor/cycle-edit-point: Change Edit Point
Editor/cycle-edit-point-with-marker: Change Edit Point Including Marker
Editor/cycle-snap-mode: Next Snap Mode
Editor/cycle-zoom-focus: Next Zoom Focus
Editor/deselect-all: Deselect All
Editor/duplicate-range: Duplicate Range
Editor/edit-at-mouse: Mouse
Editor/edit-at-playhead: Playhead
Editor/edit-at-selected-marker: Marker
Editor/edit-cursor-to-next-region-end: To Next Region End
Editor/edit-cursor-to-next-region-start: To Next Region Start
Editor/edit-cursor-to-next-region-sync: To Next Region Sync
Editor/edit-cursor-to-previous-region-end: To Previous Region End
Editor/edit-cursor-to-previous-region-start: To Previous Region Start
Editor/edit-cursor-to-previous-region-sync: To Previous Region Sync
Editor/edit-cursor-to-range-end: To Range End
Editor/edit-cursor-to-range-start: To Range Start
Editor/edit-to-playhead: Active Mark to Playhead
Editor/editor-copy: Copy
Editor/editor-crop: Crop
Editor/editor-cut: Cut
Editor/editor-delete: Delete
Editor/editor-fade-range
Editor/editor-paste: Paste
Editor/editor-separate: Separate
Editor/expand-tracks: Expand Track Height
Editor/export-audio: Export Audio
Editor/export-range: Export Range
Editor/finish-loop-range
Editor/finish-punch-range
Editor/finish-range: Finish Range
Editor/fit-selection: Fit Selected Tracks
Editor/fit_16_tracks
Editor/fit_1_track
Editor/fit_2_tracks
Editor/fit_32_tracks
Editor/fit_4_tracks
Editor/fit_8_tracks
Editor/fit_all_tracks
Editor/goto-mark-1: Locate to Mark 1
Editor/goto-mark-2: Locate to Mark 2
Editor/goto-mark-3: Locate to Mark 3
Editor/goto-mark-4: Locate to Mark 4
Editor/goto-mark-5: Locate to Mark 5
Editor/goto-mark-6: Locate to Mark 6
Editor/goto-mark-7: Locate to Mark 7
Editor/goto-mark-8: Locate to Mark 8
Editor/goto-mark-9: Locate to Mark 9
Editor/goto-visual-state-10: Goto View 10
Editor/goto-visual-state-11: Goto View 11
Editor/goto-visual-state-12: Goto View 12
Editor/goto-visual-state-1: Goto View 1
Editor/goto-visual-state-2: Goto View 2
Editor/goto-visual-state-3: Goto View 3
Editor/goto-visual-state-4: Goto View 4
Editor/goto-visual-state-5: Goto View 5
Editor/goto-visual-state-6: Goto View 6
Editor/goto-visual-state-7: Goto View 7
Editor/goto-visual-state-8: Goto View 8
Editor/goto-visual-state-9: Goto View 9
Editor/importFromSession: Import From Session
Editor/insert-time: Insert Time
Editor/invert-selection: Invert Selection
Editor/jump-backward-to-mark: Jump to Previous Mark
Editor/jump-forward-to-mark: Jump to Next Mark
Editor/lock
Editor/main-menu-play-selected-regions: Play Selected Regions
Editor/move-range-end-to-next-region-boundary: Move Range End to Next Region Boundary
Editor/move-range-end-to-previous-region-boundary: Move Range End to Previous Region Boundary
Editor/move-range-start-to-next-region-boundary: Move Range Start to Next Region Boundary
Editor/move-range-start-to-previous-region-boundary: Move Range Start to Previous Region Boundary
Editor/move-selected-tracks-down: Move Selected Tracks Down
Editor/move-selected-tracks-up: Move Selected Tracks Up
Editor/next-snap-choice: Next Snap Choice
Editor/next-snap-choice-music-only: Next Musical Snap Choice
Editor/nudge-next-backward: Nudge Next Earlier
Editor/nudge-next-forward: Nudge Next Later
Editor/nudge-playhead-backward: Nudge Playhead Backward
Editor/nudge-playhead-forward: Nudge Playhead Forward
Editor/play-edit-range: Play Edit Range
Editor/play-from-edit-point-and-return: Play from Edit Point and Return
Editor/play-from-edit-point: Play From Edit Point
Editor/playhead-backward-to-grid: Playhead To Previous Grid
Editor/playhead-forward-to-grid: Playhead To Next Grid
Editor/playhead-to-edit: Playhead to Active Mark
Editor/playhead-to-next-region-boundary: Playhead to Next Region Boundary
Editor/playhead-to-next-region-boundary-noselection: Playhead to Next Region Boundary (No Track Selection)
Editor/playhead-to-next-region-end: Playhead to Next Region End
Editor/playhead-to-next-region-start: Playhead to Next Region Start
Editor/playhead-to-next-region-sync: Playhead to Next Region Sync
Editor/playhead-to-previous-region-boundary: Playhead to Previous Region Boundary
Editor/playhead-to-previous-region-boundary-noselection: Playhead to Previous Region Boundary (No Track Selection)
Editor/playhead-to-previous-region-end: Playhead to Previous Region End
Editor/playhead-to-previous-region-start: Playhead to Previous Region Start
Editor/playhead-to-previous-region-sync: Playhead to Previous Region Sync
Editor/playhead-to-range-end: Playhead to Range End
Editor/playhead-to-range-start: Playhead to Range Start
Editor/prev-snap-choice: Previous Snap Choice
Editor/prev-snap-choice-music-only: Previous Musical Snap Choice
Editor/redo: Redo
Editor/redo-last-selection-op
Editor/remove-last-capture: Remove Last Capture
Editor/remove-location-from-playhead
Editor/remove-time
Editor/remove-track: Remove
Editor/save-visual-state-10: Save View 10
Editor/save-visual-state-11: Save View 11
Editor/save-visual-state-12: Save View 12
Editor/save-visual-state-1: Save View 1
Editor/save-visual-state-2: Save View 2
Editor/save-visual-state-3: Save View 3
Editor/save-visual-state-4: Save View 4
Editor/save-visual-state-5: Save View 5
Editor/save-visual-state-6: Save View 6
Editor/save-visual-state-7: Save View 7
Editor/save-visual-state-8: Save View 8
Editor/save-visual-state-9: Save View 9
Editor/script-action-1
Editor/script-action-2
Editor/script-action-3
Editor/script-action-4
Editor/script-action-5
Editor/script-action-6
Editor/script-action-7
Editor/script-action-8
Editor/script-action-9
Editor/scroll-backward: Scroll Backward
Editor/scroll-forward: Scroll Forward
Editor/scroll-playhead-backward: Playhead Backward
Editor/scroll-playhead-forward: Playhead Forward
Editor/scroll-tracks-down: Scroll Tracks Down
Editor/scroll-tracks-up: Scroll Tracks Up
Editor/select-all-after-edit-cursor: Select All After Edit Point
Editor/select-all-before-edit-cursor: Select All Before Edit Point
Editor/select-all-between-cursors: Select All Overlapping Edit Range
Editor/select-all-in-loop-range: Select All in Loop Range
Editor/select-all-in-punch-range: Select All in Punch Range
Editor/select-all-objects => Ctrl+A
Editor/select-all-tracks => Ctrl+T
Editor/select-all-within-cursors: Select All Inside Edit Range
Editor/select-from-regions
Editor/select-loop-range
Editor/select-next-route: Select Next Track or Bus
Editor/select-prev-route: Select Previous Track or Bus
Editor/select-punch-range
Editor/select-range-between-cursors
Editor/selected-marker-to-next-region-boundary: To Next Region Boundary
Editor/selected-marker-to-next-region-boundary-noselection: To Next Region Boundary (No Track Selection)
Editor/selected-marker-to-previous-region-boundary: To Previous Region Boundary
Editor/selected-marker-to-previous-region-boundary-noselection: To Previous Region Boundary (No Track Selection)
Editor/select-range-between-cursors: Select Edit Range
Editor/separate-from-loop: Separate Using Loop Range
Editor/separate-from-punch: Separate Using Punch Range
Editor/set-edit-lock: Lock
Editor/set-edit-point: Active Marker to Mouse
Editor/set-edit-ripple
Editor/set-edit-slide: Slide
Editor/set-loop-from-edit-range: Set Loop from Edit Range
Editor/set-playhead: Playhead to Mouse
Editor/set-punch-from-edit-range: Set Punch from Edit Range
Editor/set-session-end-from-playhead
Editor/set-session-from-edit-range
Editor/set-session-start-from-playhead
Editor/set-tempo-from-edit-range: Set Tempo from Edit Range = Bar
Editor/show-editor-list: Show Editor List
Editor/show-editor-mixer: Show Editor Mixer
Editor/show-marker-lines: Show Marker Lines
Editor/shrink-tracks: Shrink Track Height
Editor/snap-magnetic: Magnetic
Editor/snap-normal: Grid
Editor/snap-off: No Grid
Editor/sound-midi-notes: Sound Selected MIDI Notes
Editor/start-loop-range
Editor/start-punch-range
Editor/start-range: Start Range
Editor/start-range-from-playhead
Editor/step-mouse-mode: Step Mouse Mode
Editor/step-tracks-down: Step Tracks Down
Editor/step-tracks-up: Step Tracks Up
Editor/tab-to-transient-backwards: Move Earlier to Transient
Editor/tab-to-transient-forwards: Move Later to Transient
Editor/temporal-zoom-in: Zoom In
Editor/temporal-zoom-out: Zoom Out
Editor/toggle-edit-mode: Toggle Edit Mode
Editor/toggle-follow-playhead: Follow Playhead
Editor/toggle-log-window: Log
Editor/toggle-midi-input-active: Toggle MIDI Input Active for Editor-Selected Tracks/Busses
Editor/toggle-skip-playback
Editor/toggle-stationary-playhead: Stationary Playhead
Editor/toggle-track-active: Toggle Active
Editor/toggle-vmon-frame: Frame number
Editor/toggle-vmon-fullscreen: Fullscreen
Editor/toggle-vmon-letterbox: Letterbox
Editor/toggle-vmon-ontop: Always on Top
Editor/toggle-vmon-osdbg: Timecode Background
Editor/toggle-vmon-timecode: Timecode
Editor/toggle-zoom: Toggle Zoom State
Editor/track-height-large: Large
Editor/track-height-larger: Larger
Editor/track-height-largest: Largest
Editor/track-height-normal: Normal
Editor/track-height-small: Small
Editor/track-mute-toggle: Toggle Mute
Editor/track-record-enable-toggle: Toggle Record Enable
Editor/track-solo-isolate-toggle: Toggle Solo Isolate
Editor/track-solo-toggle: Toggle Solo
Editor/undo: Undo
Editor/undo-last-selection-op
Editor/zoom-to-selection
Editor/zoom-to-session: Zoom to Session
Editor/zoom-vmon-100: Original Size
Editor/zoom_100_ms
Editor/zoom_10_min
Editor/zoom_10_ms
Editor/zoom_10_sec
Editor/zoom_1_min
Editor/zoom_1_sec
Editor/zoom_5_min
EditorMenu/ActionScripts
EditorMenu/AlignMenu: Align
EditorMenu/Autoconnect: Autoconnect
EditorMenu/Crossfades: Crossfades
EditorMenu/EditCursorMovementOptions: Move Selected Marker
EditorMenu/Edit: Edit
EditorMenu/EditPointMenu: Edit Point
EditorMenu/EditSelectRangeOptions: Select Range Operations
EditorMenu/EditSelectRegionOptions: Select Regions
EditorMenu/FadeMenu: Fade
EditorMenu/LatchMenu: Latch
EditorMenu/Link: Link
EditorMenu/LocateToMarker: Locate to Markers
EditorMenu/MIDI: MIDI Options
EditorMenu/MarkerMenu: Markers
EditorMenu/MeterFalloff: Meter falloff
EditorMenu/MeterHold: Meter hold
EditorMenu/MiscOptions: Misc Options
EditorMenu/Monitoring: Monitoring
EditorMenu/MoveActiveMarkMenu: Active Mark
EditorMenu/MovePlayHeadMenu: Playhead
EditorMenu/PlayMenu: Play
EditorMenu/PrimaryClockMenu: Primary Clock
EditorMenu/Pullup: Pullup / Pulldown
EditorMenu/RegionEditOps: Region operations
EditorMenu/RegionGainMenu: Gain
EditorMenu/RegionMenuDuplicate: Duplicate
EditorMenu/RegionMenuEdit: Edit
EditorMenu/RegionMenuFades: Fades
EditorMenu/RegionMenuGain: Gain
EditorMenu/RegionMenu: Region
EditorMenu/RegionMenuLayering: Layering
EditorMenu/RegionMenuMIDI: MIDI
EditorMenu/RegionMenuPosition: Position
EditorMenu/RegionMenuRanges: Ranges
EditorMenu/RegionMenuTrim: Trim
EditorMenu/RulerMenu: Rulers
EditorMenu/SavedViewMenu: Views
EditorMenu/ScrollMenu: Scroll
EditorMenu/SecondaryClockMenu: Secondary Clock
EditorMenu/Select: Select
EditorMenu/SelectMenu: Select
EditorMenu/SeparateMenu: Separate
EditorMenu/SetLoopMenu: Loop
EditorMenu/SetPunchMenu: Punch
EditorMenu/Solo: Solo
EditorMenu/Subframes: Subframes
EditorMenu/SyncMenu: Sync
EditorMenu/TempoMenu: Tempo
EditorMenu/Timecode: Timecode fps
EditorMenu/Tools: Tools
EditorMenu/TrackHeightMenu: Height
EditorMenu/TrackMenu: Track
EditorMenu/VideoMonitorMenu: Video Monitor
EditorMenu/View: View
EditorMenu/ZoomFocus: Zoom Focus
EditorMenu/ZoomFocusMenu: Zoom Focus
EditorMenu/ZoomMenu: Zoom
MouseMode/set-mouse-mode-audition: Audition Tool
MouseMode/set-mouse-mode-content
MouseMode/set-mouse-mode-cut
MouseMode/set-mouse-mode-draw: Note Drawing Tool
MouseMode/set-mouse-mode-object: Object Tool
MouseMode/set-mouse-mode-object-range: Smart Object Mode
MouseMode/set-mouse-mode-range: Range Tool
MouseMode/set-mouse-mode-timefx: Time FX Tool
Region/add-range-marker-from-region: Add Single Range Marker
Region/add-range-markers-from-region: Add Range Marker Per Region
Region/align-regions-end: Align End
Region/align-regions-end-relative: Align End Relative
Region/align-regions-start: Align Start
Region/align-regions-start-relative: Align Start Relative
Region/align-regions-sync: Align Sync
Region/align-regions-sync-relative: Align Sync Relative
/Region/alternate-nudge-backward
/Region/alternate-nudge-forward
/Region/alternate-set-fade-in-length
/Region/alternate-set-fade-out-length
Region/boost-region-gain: Boost Gain
Region/bounce-regions-processed: Bounce (without processing)
Region/bounce-regions-unprocessed: Bounce (with processing)
Region/choose-top-region-context-menu: Choose Top...
Region/choose-top-region: Choose Top...
Region/close-region-gaps: Close Gaps
Region/combine-regions: Combine
Region/cut-region-gain: Cut Gain
Region/duplicate-region: Duplicate
Region/export-region: Export...
Region/fork-region: Unlink from other copies
Region/insert-patch-change-context: Insert Patch Change...
Region/insert-patch-change: Insert Patch Change...
Region/insert-region-from-region-list: Insert Region From Region List
/Region/legatize-region
Region/loop-region: Loop
Region/loudness-analyze-region
Region/lower-region: Lower
Region/lower-region-to-bottom: Lower to Bottom
Region/multi-duplicate-region: Multi-Duplicate...
Region/naturalize-region: Move to Original Position
Region/normalize-region: Normalize...
Region/nudge-backward-by-capture-offset: Nudge Earlier by Capture Offset
Region/nudge-backward: Nudge Earlier
Region/nudge-forward-by-capture-offset: Nudge Later by Capture Offset
Region/nudge-forward: Nudge Later
Region/pitch-shift-region: Pitch Shift...
Region/place-transient: Place Transient
Region/play-selected-regions: Play
Region/quantize-region: Quantize...
Region/raise-region: Raise
Region/raise-region-to-top: Raise to Top
Region/region-fill-track: Fill Track
Region/remove-region: Remove
Region/remove-region-sync: Remove Sync
Region/rename-region: Rename...
Region/reset-region-gain-envelopes: Reset Envelope
Region/reset-region-scale-amplitude: Reset Gain
Region/reverse-region: Reverse
Region/separate-under-region: Separate Under
Region/sequence-regions
Region/set-fade-in-length: Set Fade In Length
Region/set-fade-out-length: Set Fade Out Length
Region/set-loop-from-region: Set Loop Range
Region/set-punch-from-region: Set Punch
Region/set-region-sync-position: Set Sync Position
Region/set-selection-from-region: Set Range Selection
Region/set-tempo-from-region: Set Tempo from Region = Bar
Region/show-region-list-editor: List Editor...
Region/show-region-properties: Properties...
Region/show-rhythm-ferret: Rhythm Ferret...
Region/snap-regions-to-grid: Snap Position To Grid
Region/split-multichannel-region: Make Mono Regions
Region/split-region-at-transients: Split at Percussion Onsets
Region/split-region: Split
Region/strip-region-silence: Strip Silence...
Region/toggle-opaque-region: Opaque
Region/toggle-region-fade-in: Fade In
Region/toggle-region-fade-out: Fade Out
Region/toggle-region-fades: Fades
Region/toggle-region-gain-envelope-active: Envelope Active
Region/toggle-region-lock: Lock
Region/toggle-region-lock-style: Glue to Bars and Beats
Region/toggle-region-mute: Mute
Region/toggle-region-video-lock: Lock to Video
Region/transform-region
Region/transpose-region: Transpose...
Region/trim-back: Trim End at Edit Point
Region/trim-front: Trim Start at Edit Point
Region/trim-region-to-loop: Trim to Loop
Region/trim-region-to-punch: Trim to Punch
Region/trim-to-next-region: Trim to Next
Region/trim-to-previous-region: Trim to Previous
Region/uncombine-regions: Uncombine
RegionList/RegionListSort: Sort
RegionList/SortAscending: Ascending
RegionList/SortByRegionEndinFile: By Region End in File
RegionList/SortByRegionLength: By Region Length
RegionList/SortByRegionName: By Region Name
RegionList/SortByRegionPosition: By Region Position
RegionList/SortByRegionStartinFile: By Region Start in File
RegionList/SortByRegionTimestamp: By Region Timestamp
RegionList/SortBySourceFileCreationDate: By Source File Creation Date
RegionList/SortBySourceFileLength: By Source File Length
RegionList/SortBySourceFileName: By Source File Name
RegionList/SortBySourceFilesystem: By Source Filesystem
RegionList/SortDescending: Descending
RegionList/removeUnusedRegions: Remove Unused
RegionList/rlAudition: Audition
RegionList/rlHide: Hide
RegionList/rlShow: Show
RegionList/rlShowAll: Show All
RegionList/rlShowAuto: Show Automatic Regions
Rulers/toggle-bbt-ruler: Bars & Beats
Rulers/toggle-cd-marker-ruler: CD Markers
Rulers/toggle-loop-punch-ruler: Loop/Punch
Rulers/toggle-marker-ruler: Markers
Rulers/toggle-meter-ruler: Meter
Rulers/toggle-minsec-ruler: Min:Sec
Rulers/toggle-range-ruler: Ranges
Rulers/toggle-samples-ruler: Samples
Rulers/toggle-tempo-ruler: Tempo
Rulers/toggle-timecode-ruler: Timecode
Rulers/toggle-video-ruler: Video
Snap/snap-to-asixteenthbeat: Snap to Sixteenths
Snap/snap-to-bar: Snap to Bar
Snap/snap-to-beat: Snap to Beat
Snap/snap-to-cd-frame: Snap to CD Frame
Snap/snap-to-eighths: Snap to Eighths
Snap/snap-to-fifths: Snap to Fifths
Snap/snap-to-fourteenths: Snap to Fourteenths
Snap/snap-to-halves: Snap to Halves
Snap/snap-to-mark: Snap to Mark
Snap/snap-to-minutes: Snap to Minutes
Snap/snap-to-onetwentyeighths: Snap to One Twenty Eighths
Snap/snap-to-quarters: Snap to Quarters
Snap/snap-to-region-boundary: Snap to Region Boundary
Snap/snap-to-region-end: Snap to Region End
Snap/snap-to-region-start: Snap to Region Start
Snap/snap-to-region-sync: Snap to Region Sync
Snap/snap-to-seconds: Snap to Seconds
Snap/snap-to-sevenths: Snap to Sevenths
Snap/snap-to-sixths: Snap to Sixths
Snap/snap-to-sixtyfourths: Snap to Sixty Fourths
Snap/snap-to-tenths: Snap to Tenths
Snap/snap-to-thirds: Snap to Thirds
Snap/snap-to-thirtyseconds: Snap to Thirty Seconds
Snap/snap-to-timecode-frame: Snap to Timecode Frame
Snap/snap-to-timecode-minutes: Snap to Timecode Minutes
Snap/snap-to-timecode-seconds: Snap to Timecode Seconds
Snap/snap-to-twelfths: Snap to Twelfths
Snap/snap-to-twentieths: Snap to Twentieths
Snap/snap-to-twentyeighths: Snap to Twenty Eighths
Snap/snap-to-twentyfourths: Snap to Twenty Fourths
Zoom/zoom-focus-center: Zoom Focus Center
Zoom/zoom-focus-edit: Zoom Focus Edit Point
Zoom/zoom-focus-left: Zoom Focus Left
Zoom/zoom-focus-mouse: Zoom Focus Mouse
Zoom/zoom-focus-playhead: Zoom Focus Playhead
Zoom/zoom-focus-right: Zoom Focus Right
/Mixer/ab-plugins
/Mixer/copy-processors
/Mixer/cut-processors
/Mixer/decrement-gain
/Mixer/delete-processors
/Mixer/increment-gain
/Mixer/mute
/Mixer/paste-processors
/Mixer/recenable
/Mixer/scroll-left
/Mixer/scroll-right
/Mixer/select-all-processors
/Mixer/select-none
/Mixer/solo
/Mixer/toggle-midi-input-active
/Mixer/toggle-processors
/Mixer/unity-gain