2 // mmu.cpp: Memory management
5 // (C) 2013-2018 Underground Software
7 // JLH = James Hammons <jlhamm@acm.org>
10 // --- ---------- -----------------------------------------------------------
11 // JLH 09/27/2013 Created this file
18 #include "mockingboard.h"
26 // Address Map enumeration
27 enum { AM_RAM, AM_ROM, AM_BANKED, AM_READ, AM_WRITE, AM_READ_WRITE, AM_END_OF_LIST };
30 uint8_t ** addrPtrRead[0x10000];
31 uint8_t ** addrPtrWrite[0x10000];
32 uint16_t addrOffset[0x10000];
34 READFUNC(funcMapRead[0x10000]);
35 WRITEFUNC(funcMapWrite[0x10000]);
37 READFUNC(slotHandlerR[8]);
38 WRITEFUNC(slotHandlerW[8]);
40 READFUNC(slotHandler2KR[8]);
41 WRITEFUNC(slotHandler2KW[8]);
56 #define ADDRESS_MAP_END { 0x0000, 0x0000, AM_END_OF_LIST, 0, 0, 0, 0 }
58 // Dunno if I like this approach or not...
60 // AM_RANGE(0x0000, 0xBFFF) AM_RAM AM_BASE(ram) AM_SHARE(1)
61 // AM_RANGE(0xC000, 0xC001) AM_READWRITE(readFunc, writeFunc)
64 // Would need a pointer for 80STORE as well...
66 uint8_t * pageZeroMemory = &ram[0x0000]; // $0000 - $01FF
67 uint8_t * mainMemoryR = &ram[0x0200]; // $0200 - $BFFF (read)
68 uint8_t * mainMemoryW = &ram[0x0200]; // $0200 - $BFFF (write)
70 uint8_t * mainMemoryTextR = &ram[0x0400]; // $0400 - $07FF (read)
71 uint8_t * mainMemoryTextW = &ram[0x0400]; // $0400 - $07FF (write)
72 uint8_t * mainMemoryHGRR = &ram[0x2000]; // $2000 - $3FFF (read)
73 uint8_t * mainMemoryHGRW = &ram[0x2000]; // $2000 - $3FFF (write)
75 uint8_t * slotMemory = &rom[0xC100]; // $C100 - $C7FF
76 uint8_t * peripheralMemory= &rom[0xC800]; // $C800 - $CFFF
77 uint8_t * slot3Memory = &rom[0xC300]; // $C300 - $C3FF
78 uint8_t * slot4Memory = &rom[0xC400]; // $C400 - $C4FF
79 uint8_t * slot6Memory = &diskROM[0]; // $C600 - $C6FF
80 uint8_t * lcBankMemoryR = &ram[0xD000]; // $D000 - $DFFF (read)
81 uint8_t * lcBankMemoryW = &ram[0xD000]; // $D000 - $DFFF (write)
82 uint8_t * upperMemoryR = &ram[0xE000]; // $E000 - $FFFF (read)
83 uint8_t * upperMemoryW = &ram[0xE000]; // $E000 - $FFFF (write)
86 // Function prototypes
87 uint8_t ReadNOP(uint16_t);
88 void WriteNOP(uint16_t, uint8_t);
89 uint8_t ReadMemory(uint16_t);
90 void WriteMemory(uint16_t, uint8_t);
91 uint8_t SlotR(uint16_t address);
92 void SlotW(uint16_t address, uint8_t byte);
93 uint8_t Slot2KR(uint16_t address);
94 void Slot2KW(uint16_t address, uint8_t byte);
95 uint8_t ReadKeyboard(uint16_t);
96 void Switch80STORE(uint16_t, uint8_t);
97 void SwitchRAMRD(uint16_t, uint8_t);
98 void SwitchRAMWRT(uint16_t, uint8_t);
99 void SwitchSLOTCXROM(uint16_t, uint8_t);
100 void SwitchALTZP(uint16_t, uint8_t);
101 void SwitchSLOTC3ROM(uint16_t, uint8_t);
102 uint8_t SwitchINTC8ROMR(uint16_t);
103 void SwitchINTC8ROMW(uint16_t, uint8_t);
104 void Switch80COL(uint16_t, uint8_t);
105 void SwitchALTCHARSET(uint16_t, uint8_t);
106 uint8_t ReadKeyStrobe(uint16_t);
107 uint8_t ReadBANK2(uint16_t);
108 uint8_t ReadLCRAM(uint16_t);
109 uint8_t ReadRAMRD(uint16_t);
110 uint8_t ReadRAMWRT(uint16_t);
111 uint8_t ReadSLOTCXROM(uint16_t);
112 uint8_t ReadALTZP(uint16_t);
113 uint8_t ReadSLOTC3ROM(uint16_t);
114 uint8_t Read80STORE(uint16_t);
115 uint8_t ReadVBL(uint16_t);
116 uint8_t ReadTEXT(uint16_t);
117 uint8_t ReadMIXED(uint16_t);
118 uint8_t ReadPAGE2(uint16_t);
119 uint8_t ReadHIRES(uint16_t);
120 uint8_t ReadALTCHARSET(uint16_t);
121 uint8_t Read80COL(uint16_t);
122 void WriteKeyStrobe(uint16_t, uint8_t);
123 uint8_t ReadSpeaker(uint16_t);
124 void WriteSpeaker(uint16_t, uint8_t);
125 uint8_t SwitchLCR(uint16_t);
126 void SwitchLCW(uint16_t, uint8_t);
128 uint8_t SwitchTEXTR(uint16_t);
129 void SwitchTEXTW(uint16_t, uint8_t);
130 uint8_t SwitchMIXEDR(uint16_t);
131 void SwitchMIXEDW(uint16_t, uint8_t);
132 uint8_t SwitchPAGE2R(uint16_t);
133 void SwitchPAGE2W(uint16_t, uint8_t);
134 uint8_t SwitchHIRESR(uint16_t);
135 void SwitchHIRESW(uint16_t, uint8_t);
136 uint8_t SwitchDHIRESR(uint16_t);
137 void SwitchDHIRESW(uint16_t, uint8_t);
138 void SwitchIOUDIS(uint16_t, uint8_t);
139 uint8_t ReadButton0(uint16_t);
140 uint8_t ReadButton1(uint16_t);
141 uint8_t ReadPaddle0(uint16_t);
142 uint8_t ReadIOUDIS(uint16_t);
143 uint8_t ReadDHIRES(uint16_t);
146 // The main Apple //e memory map
147 AddressMap memoryMap[] = {
148 { 0x0000, 0x01FF, AM_RAM, &pageZeroMemory, 0, 0, 0 },
149 { 0x0200, 0xBFFF, AM_BANKED, &mainMemoryR, &mainMemoryW, 0, 0 },
151 // These will overlay over the previously written memory accessors
152 { 0x0400, 0x07FF, AM_BANKED, &mainMemoryTextR, &mainMemoryTextW, 0, 0 },
153 { 0x2000, 0x3FFF, AM_BANKED, &mainMemoryHGRR, &mainMemoryHGRW, 0, 0 },
155 { 0xC000, 0xC001, AM_READ_WRITE, 0, 0, ReadKeyboard, Switch80STORE },
156 { 0xC002, 0xC003, AM_READ_WRITE, 0, 0, ReadKeyboard, SwitchRAMRD },
157 { 0xC004, 0xC005, AM_READ_WRITE, 0, 0, ReadKeyboard, SwitchRAMWRT },
158 { 0xC006, 0xC007, AM_READ_WRITE, 0, 0, ReadKeyboard, SwitchSLOTCXROM },
159 { 0xC008, 0xC009, AM_READ_WRITE, 0, 0, ReadKeyboard, SwitchALTZP },
160 { 0xC00A, 0xC00B, AM_READ_WRITE, 0, 0, ReadKeyboard, SwitchSLOTC3ROM },
161 { 0xC00C, 0xC00D, AM_READ_WRITE, 0, 0, ReadKeyboard, Switch80COL },
162 { 0xC00E, 0xC00F, AM_READ_WRITE, 0, 0, ReadKeyboard, SwitchALTCHARSET },
163 { 0xC010, 0xC010, AM_READ_WRITE, 0, 0, ReadKeyStrobe, WriteKeyStrobe },
164 { 0xC011, 0xC011, AM_READ_WRITE, 0, 0, ReadBANK2, WriteKeyStrobe },
165 { 0xC012, 0xC012, AM_READ_WRITE, 0, 0, ReadLCRAM, WriteKeyStrobe },
166 { 0xC013, 0xC013, AM_READ_WRITE, 0, 0, ReadRAMRD, WriteKeyStrobe },
167 { 0xC014, 0xC014, AM_READ_WRITE, 0, 0, ReadRAMWRT, WriteKeyStrobe },
168 { 0xC015, 0xC015, AM_READ_WRITE, 0, 0, ReadSLOTCXROM, WriteKeyStrobe },
169 { 0xC016, 0xC016, AM_READ_WRITE, 0, 0, ReadALTZP, WriteKeyStrobe },
170 { 0xC017, 0xC017, AM_READ_WRITE, 0, 0, ReadSLOTC3ROM, WriteKeyStrobe },
171 { 0xC018, 0xC018, AM_READ_WRITE, 0, 0, Read80STORE, WriteKeyStrobe },
172 { 0xC019, 0xC019, AM_READ_WRITE, 0, 0, ReadVBL, WriteKeyStrobe },
173 { 0xC01A, 0xC01A, AM_READ_WRITE, 0, 0, ReadTEXT, WriteKeyStrobe },
174 { 0xC01B, 0xC01B, AM_READ_WRITE, 0, 0, ReadMIXED, WriteKeyStrobe },
175 { 0xC01C, 0xC01C, AM_READ_WRITE, 0, 0, ReadPAGE2, WriteKeyStrobe },
176 { 0xC01D, 0xC01D, AM_READ_WRITE, 0, 0, ReadHIRES, WriteKeyStrobe },
177 { 0xC01E, 0xC01E, AM_READ_WRITE, 0, 0, ReadALTCHARSET, WriteKeyStrobe },
178 { 0xC01F, 0xC01F, AM_READ_WRITE, 0, 0, Read80COL, WriteKeyStrobe },
179 // $C020 is "Cassette Out (RO)"
180 { 0xC020, 0xC02F, AM_READ, 0, 0, ReadFloatingBus, 0 },
181 // May have to put a "floating bus" read there... :-/
182 // Apparently, video RAM is put on 'non-responding address'. So will
183 // need to time those out.
184 // So... $C020-$C08F, when read, return video data.
185 // $C090-$C7FF do also, as long as the slot the range refers to is empty
186 // and last and least is $CFFF, which is the Expansion ROM disable.
187 { 0xC030, 0xC03F, AM_READ_WRITE, 0, 0, ReadSpeaker, WriteSpeaker },
188 { 0xC050, 0xC051, AM_READ_WRITE, 0, 0, SwitchTEXTR, SwitchTEXTW },
189 { 0xC052, 0xC053, AM_READ_WRITE, 0, 0, SwitchMIXEDR, SwitchMIXEDW },
190 { 0xC054, 0xC055, AM_READ_WRITE, 0, 0, SwitchPAGE2R, SwitchPAGE2W },
191 { 0xC056, 0xC057, AM_READ_WRITE, 0, 0, SwitchHIRESR, SwitchHIRESW },
192 { 0xC05E, 0xC05F, AM_READ_WRITE, 0, 0, SwitchDHIRESR, SwitchDHIRESW },
193 { 0xC061, 0xC061, AM_READ, 0, 0, ReadButton0, 0 },
194 { 0xC062, 0xC062, AM_READ, 0, 0, ReadButton1, 0 },
195 { 0xC064, 0xC067, AM_READ, 0, 0, ReadPaddle0, 0 },
196 { 0xC07E, 0xC07E, AM_READ_WRITE, 0, 0, ReadIOUDIS, SwitchIOUDIS },
197 { 0xC07F, 0xC07F, AM_READ_WRITE, 0, 0, ReadDHIRES, SwitchIOUDIS },
198 { 0xC080, 0xC08F, AM_READ_WRITE, 0, 0, SwitchLCR, SwitchLCW },
200 { 0xC100, 0xC7FF, AM_READ_WRITE, 0, 0, SlotR, SlotW },
201 { 0xC800, 0xCFFE, AM_READ_WRITE, 0, 0, Slot2KR, Slot2KW },
202 { 0xCFFF, 0xCFFF, AM_READ_WRITE, 0, 0, SwitchINTC8ROMR, SwitchINTC8ROMW },
204 { 0xD000, 0xDFFF, AM_BANKED, &lcBankMemoryR, &lcBankMemoryW, 0, 0 },
205 { 0xE000, 0xFFFF, AM_BANKED, &upperMemoryR, &upperMemoryW, 0, 0 },
209 Some stuff that may be useful:
211 N.B.: Page 5-22 of UTA2E has INTC8ROM ON/OFF backwards
212 INTC8ROM is turned OFF by R/W access to $CFFF
213 INTC8ROM is turned ON by $C3xx access and SLOTC3ROM' (off)
214 WRONG: (INTC8ROM on puts card's slot ROM/RAM(?) access in $C800-$CFFF)
216 OK, so it's slightly more complex than that. Basically, when there is an access to $CFFF, all peripheral cards must *stop* responding to I/O STROBE'. Only when a card gets an I/O SELECT' signal, can it respond to I/O STROBE'.
218 INTC8ROM inhibits I/O STROBE' and activates the MB ROM in $C800-$CFFF
219 INTC8ROM is 1 by access to $C3xx when SLOTC3ROM is 0
220 INTC8ROM is 0 by access to $CFFF
222 ICX = INTCXROM (aka SLOTCXROM), SC3 = SLOTC3ROM
224 ICX=0,SC3=0 ICX=0,SC3=1 ICX=1,SC3=0 ICX=1,SC3=1
225 $C100-$C2FF slot slot internal internal
226 $C300-$C3FF internal slot internal internal
227 $C400-$CFFF slot slot internal internal
229 Read from $C800-$CFFF causes I/O STROBE to go low (and INTCXROM and INTC8ROM are not set)
234 void SetupAddressMap(void)
236 for(uint32_t i=0; i<0x10000; i++)
238 funcMapRead[i] = ReadNOP;
239 funcMapWrite[i] = WriteNOP;
245 for(uint32_t i=0; i<8; i++)
247 slotHandlerR[i] = ReadNOP;
248 slotHandlerW[i] = WriteNOP;
249 slotHandler2KR[i] = ReadNOP;
250 slotHandler2KW[i] = WriteNOP;
255 while (memoryMap[i].type != AM_END_OF_LIST)
257 switch (memoryMap[i].type)
260 for(uint32_t j=memoryMap[i].start; j<=memoryMap[i].end; j++)
262 funcMapRead[j] = ReadMemory;
263 funcMapWrite[j] = WriteMemory;
264 addrPtrRead[j] = memoryMap[i].memory;
265 addrPtrWrite[j] = memoryMap[i].memory;
266 addrOffset[j] = j - memoryMap[i].start;
267 //WriteLog("SetupAddressMap: j=$%04X, addrOffset[j]=$%04X\n", j, addrOffset[j]);
272 for(uint32_t j=memoryMap[i].start; j<=memoryMap[i].end; j++)
274 funcMapRead[j] = ReadMemory;
275 addrPtrRead[j] = memoryMap[i].memory;
276 addrOffset[j] = j - memoryMap[i].start;
281 for(uint32_t j=memoryMap[i].start; j<=memoryMap[i].end; j++)
283 funcMapRead[j] = ReadMemory;
284 funcMapWrite[j] = WriteMemory;
285 addrPtrRead[j] = memoryMap[i].memory;
286 addrPtrWrite[j] = memoryMap[i].altMemory;
287 addrOffset[j] = j - memoryMap[i].start;
292 for(uint32_t j=memoryMap[i].start; j<=memoryMap[i].end; j++)
293 funcMapRead[j] = memoryMap[i].read;
297 for(uint32_t j=memoryMap[i].start; j<=memoryMap[i].end; j++)
298 funcMapWrite[j] = memoryMap[i].write;
302 for(uint32_t j=memoryMap[i].start; j<=memoryMap[i].end; j++)
304 funcMapRead[j] = memoryMap[i].read;
305 funcMapWrite[j] = memoryMap[i].write;
314 // This should correctly set up the LC pointers, but it doesn't
315 // for some reason... :-/
316 // It's because we were storing pointers directly, instead of pointers
317 // to the pointer... It's complicated. :-)
323 // Reset the MMU state after a power down event
325 void ResetMMUPointers(void)
329 mainMemoryTextR = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
330 mainMemoryTextW = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
334 mainMemoryTextR = (ramwrt ? &ram2[0x0400] : &ram[0x0400]);
335 mainMemoryTextW = (ramwrt ? &ram2[0x0400] : &ram[0x0400]);
338 mainMemoryR = (ramrd ? &ram2[0x0200] : &ram[0x0200]);
339 mainMemoryHGRR = (ramrd ? &ram2[0x2000] : &ram[0x2000]);
340 mainMemoryW = (ramwrt ? &ram2[0x0200] : &ram[0x0200]);
341 mainMemoryHGRW = (ramwrt ? &ram2[0x2000] : &ram[0x2000]);
343 // slot6Memory = (intCXROM ? &rom[0xC600] : &diskROM[0]);
344 // slot3Memory = (slotC3ROM ? &rom[0] : &rom[0xC300]);
345 pageZeroMemory = (altzp ? &ram2[0x0000] : &ram[0x0000]);
348 WriteLog("RAMWRT = %s\n", (ramwrt ? "ON" : "off"));
349 WriteLog("RAMRD = %s\n", (ramrd ? "ON" : "off"));
350 WriteLog("SLOTCXROM = %s\n", (intCXROM ? "ON" : "off"));
351 WriteLog("SLOTC3ROM = %s\n", (slotC3ROM ? "ON" : "off"));
352 WriteLog("ALTZP = %s\n", (altzp ? "ON" : "off"));
358 // Set up slot access
360 void InstallSlotHandler(uint8_t slot, SlotData * slotData)
365 WriteLog("InstallSlotHanlder: Caller attempted to put device into slot #%u...\n", slot);
369 // Set up I/O read & write functions
370 for(uint32_t i=0; i<16; i++)
373 funcMapRead[0xC080 + (slot * 16) + i] = slotData->ioR;
376 funcMapWrite[0xC080 + (slot * 16) + i] = slotData->ioW;
379 // Set up memory access read/write functions
381 slotHandlerR[slot] = slotData->pageR;
384 slotHandlerW[slot] = slotData->pageW;
386 if (slotData->extraR)
387 slotHandler2KR[slot] = slotData->extraR;
389 if (slotData->extraW)
390 slotHandler2KW[slot] = slotData->extraW;
392 Was thinking about how to make these things more self-contained, so that the management overhead would be less. IOW, you should be able to make an object (struct) that holds everything needed to interface the MMU with itself--InstallSlotHandler *almost* does this, but not quite. A consequence of this approach is that we would have to add generic slot I/O handlers into the mix, but that shouldn't be too horrible. So it could be something like so:
397 uint16_t type; // Probably an enum so we can figure out what 'object' is
401 WRITEFUNC(slotPageW);
406 So instead of a bunch of crappy shit that sucks in here, we would have a simple thing like:
410 to encapsulate slots. This also makes it easier to move them around and makes things less error prone.
420 // Built-in functions
422 uint8_t ReadNOP(uint16_t)
424 // This is for unconnected reads, and some software looks at addresses like
425 // these. In particular, Mr. Robot and His Robot Factory failed in that it
426 // was looking at the first byte of each slots 256 byte driver space and
427 // failing if it saw a zero there. Now I have no idea what happens in the
428 // real hardware, but I suspect it would return something that looks like
429 // ReadFloatingBus().
434 void WriteNOP(uint16_t, uint8_t)
439 uint8_t ReadMemory(uint16_t address)
441 //WriteLog("ReadMemory: addr=$%04X, addrPtrRead[addr]=$%X, addrOffset[addr]=$%X, val=$%02X\n", address, addrPtrRead[address], addrOffset[address], addrPtrRead[address][addrOffset[address]]);
442 // We are guaranteed a valid address here by the setup function, so there's
443 // no need to do any checking here.
444 return (*addrPtrRead[address])[addrOffset[address]];
448 void WriteMemory(uint16_t address, uint8_t byte)
450 // We can write protect memory this way, but it adds a branch to the mix.
451 // :-/ (this can be avoided by setting up another bank of memory which we
453 if ((*addrPtrWrite[address]) == 0)
456 (*addrPtrWrite[address])[addrOffset[address]] = byte;
461 // The main memory access functions used by V65C02
463 uint8_t AppleReadMem(uint16_t address)
466 if (address == 0xD4 || address == 0xAC20)
467 WriteLog("Reading $%X...\n", address);
470 uint8_t memRead = (*(funcMapRead[address]))(address);
471 static uint16_t lastAddr = 0;
472 static uint32_t lastCount = 0;
473 if ((address > 0xC000 && address < 0xC100) || address == 0xC601)
475 if (lastAddr == address)
480 WriteLog("%d times...\n", lastCount);
482 WriteLog("Reading $%02X from $%X ($%02X, $%02X)\n", memRead, address, diskROM[1], rom[0xC601]);
489 return (*(funcMapRead[address]))(address);
494 void AppleWriteMem(uint16_t address, uint8_t byte)
497 static uint16_t lastAddr = 0;
498 static uint32_t lastCount = 0;
499 if ((address > 0xC000 && address < 0xC100) || address == 0xC601)
501 if (lastAddr == address)
506 WriteLog("%d times...\n", lastCount);
508 WriteLog("Writing to $%X\n", address);
515 if (address == 0xD4 || address == 0xAC20)
516 WriteLog("Writing $%02X @ $%X...\n", byte, address);
519 //if (address >= 0x0827 && address <= 0x082A)
520 if (address == 0x000D)
521 WriteLog("Writing $%02X @ $%X (PC=$%04X)...\n", byte, address, mainCPU.pc);
523 (*(funcMapWrite[address]))(address, byte);
528 // Generic slot handlers. These are set up here so that we can catch INTCXROM,
529 // INTC8ROM & SLOTC3ROM here instead of having to catch them in each slot handler.
531 uint8_t SlotR(uint16_t address)
533 //WriteLog("SlotR: address=$%04X, intCXROM=%d, slotC3ROM=%d, intC8ROM=%d\n", address, intCXROM, slotC3ROM, intC8ROM);
537 uint8_t slot = (address & 0xF00) >> 8;
540 if ((slotC3ROM == 0) && (slot == 3))
546 return (*(slotHandlerR[slot]))(address & 0xFF);
550 void SlotW(uint16_t address, uint8_t byte)
555 uint8_t slot = (address & 0xF00) >> 8;
558 if ((slotC3ROM == 0) && (slot == 3))
564 (*(slotHandlerW[slot]))(address & 0xFF, byte);
569 // Slot handling for 2K address space at $C800-$CFFF
571 uint8_t Slot2KR(uint16_t address)
573 if (intCXROM || intC8ROM)
576 return (*(slotHandler2KR[enabledSlot]))(address & 0x7FF);
580 void Slot2KW(uint16_t address, uint8_t byte)
582 if (intCXROM || intC8ROM)
585 (*(slotHandler2KW[enabledSlot]))(address & 0x7FF, byte);
590 // Actual emulated I/O functions follow
592 uint8_t ReadKeyboard(uint16_t /*addr*/)
594 return lastKeyPressed | ((uint8_t)keyDown << 7);
598 void Switch80STORE(uint16_t address, uint8_t)
600 store80Mode = (bool)(address & 0x01);
601 WriteLog("Setting 80STORE to %s...\n", (store80Mode ? "ON" : "off"));
605 mainMemoryTextR = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
606 mainMemoryTextW = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
610 mainMemoryTextR = (ramwrt ? &ram2[0x0400] : &ram[0x0400]);
611 mainMemoryTextW = (ramwrt ? &ram2[0x0400] : &ram[0x0400]);
616 void SwitchRAMRD(uint16_t address, uint8_t)
618 ramrd = (bool)(address & 0x01);
619 mainMemoryR = (ramrd ? &ram2[0x0200] : &ram[0x0200]);
620 mainMemoryHGRR = (ramrd ? &ram2[0x2000] : &ram[0x2000]);
625 mainMemoryTextR = (ramrd ? &ram2[0x0400] : &ram[0x0400]);
629 void SwitchRAMWRT(uint16_t address, uint8_t)
631 ramwrt = (bool)(address & 0x01);
632 mainMemoryW = (ramwrt ? &ram2[0x0200] : &ram[0x0200]);
633 mainMemoryHGRW = (ramwrt ? &ram2[0x2000] : &ram[0x2000]);
638 mainMemoryTextW = (ramwrt ? &ram2[0x0400] : &ram[0x0400]);
643 // Since any slots that aren't populated are set to read from the ROM anyway,
644 // we only concern ourselves with switching populated slots here. (Note that
645 // the MB slot is a split ROM / I/O device, and it's taken care of in the
648 // N.B.: SLOTCXROM is also INTCXROM
650 void SwitchSLOTCXROM(uint16_t address, uint8_t)
652 WriteLog("Setting SLOTCXROM to %s...\n", (address & 0x01 ? "ON" : "off"));
653 intCXROM = (bool)(address & 0x01);
655 // INTC8ROM trumps all (only in the $C800--$CFFF range... which we don't account for yet... :-/)
662 slot3Memory = &rom[0xC300];
663 slot6Memory = &rom[0xC600];
667 slot3Memory = (slotC3ROM ? &rom[0] : &rom[0xC300]);
668 slot6Memory = &diskROM[0];
671 // slot3Memory = (intCXROM ? &rom[0xC300] : &rom[0]);
672 slot6Memory = (intCXROM ? &rom[0xC600] : &diskROM[0]);
678 void SwitchALTZP(uint16_t address, uint8_t)
680 altzp = (bool)(address & 0x01);
681 pageZeroMemory = (altzp ? &ram2[0x0000] : &ram[0x0000]);
685 //extern bool dumpDis;
687 // The interpretation of this name is that if it's set then we access the ROM
688 // for the card actually sitting in SLOT 3 (if any)
690 void SwitchSLOTC3ROM(uint16_t address, uint8_t)
693 //WriteLog("Setting SLOTC3ROM to %s...\n", (address & 0x01 ? "ON" : "off"));
694 slotC3ROM = (bool)(address & 0x01);
697 slot3Memory = &rom[0xC300];
699 slot3Memory = (slotC3ROM ? &rom[0] : &rom[0xC300]);
701 // slotC3ROM = false;
702 // Seems the h/w forces this with an 80 column card in slot 3...
703 slot3Memory = (slotC3ROM ? &rom[0] : &rom[0xC300]);
704 // slot3Memory = &rom[0xC300];
710 We need to see where this is being switched from; if we know that, we can switch in the appropriate ROM to $C800-$CFFF. N.B.: Will probably need a custom handler routine, as some cards (like the Apple Hi-Speed SCSI card) split the 2K range into a 1K RAM space and a 1K bank switch ROM space.
713 // This is a problem with split ROM / I/O regions. Because we can't do that
714 // cleanly, we have to have a read handler for this.
716 // N.B.: We could add AM_IOREAD_WRITE and AM_READ_IOWRITE to the memory handlers
717 // to take care of split ROM / I/O regions...
719 uint8_t SwitchINTC8ROMR(uint16_t)
721 WriteLog("Hitting INTC8ROM (read)...\n");
728 // This resets the INTC8ROM switch (RW)
730 void SwitchINTC8ROMW(uint16_t, uint8_t)
732 WriteLog("Hitting INTC8ROM (write)...\n");
737 void Switch80COL(uint16_t address, uint8_t)
739 col80Mode = (bool)(address & 0x01);
743 void SwitchALTCHARSET(uint16_t address, uint8_t)
745 alternateCharset = (bool)(address & 0x01);
746 WriteLog("Setting ALTCHARSET to %s...\n", (alternateCharset ? "ON" : "off"));
750 uint8_t ReadKeyStrobe(uint16_t)
752 // No character data is read from here, just the 'any key was pressed'
754 uint8_t byte = (uint8_t)keyDown << 7;
760 uint8_t ReadBANK2(uint16_t)
762 return (lcState < 0x04 ? 0x80 : 0x00);
766 uint8_t ReadLCRAM(uint16_t)
768 // If bits 0 & 1 are set, but not at the same time, then it's ROM
769 uint8_t lcROM = (lcState & 0x1) ^ ((lcState & 0x02) >> 1);
770 return (lcROM ? 0x00 : 0x80);
774 uint8_t ReadRAMRD(uint16_t)
776 return (uint8_t)ramrd << 7;
780 uint8_t ReadRAMWRT(uint16_t)
782 return (uint8_t)ramwrt << 7;
786 uint8_t ReadSLOTCXROM(uint16_t)
788 return (uint8_t)intCXROM << 7;
792 uint8_t ReadALTZP(uint16_t)
794 return (uint8_t)altzp << 7;
798 uint8_t ReadSLOTC3ROM(uint16_t)
800 return (uint8_t)slotC3ROM << 7;
804 uint8_t Read80STORE(uint16_t)
806 return (uint8_t)store80Mode << 7;
810 uint8_t ReadVBL(uint16_t)
812 return (uint8_t)vbl << 7;
816 uint8_t ReadTEXT(uint16_t)
818 return (uint8_t)textMode << 7;
822 uint8_t ReadMIXED(uint16_t)
824 return (uint8_t)mixedMode << 7;
828 uint8_t ReadPAGE2(uint16_t)
830 return (uint8_t)displayPage2 << 7;
834 uint8_t ReadHIRES(uint16_t)
836 return (uint8_t)hiRes << 7;
840 uint8_t ReadALTCHARSET(uint16_t)
842 return (uint8_t)alternateCharset << 7;
846 uint8_t Read80COL(uint16_t)
848 return (uint8_t)col80Mode << 7;
852 void WriteKeyStrobe(uint16_t, uint8_t)
858 uint8_t ReadSpeaker(uint16_t)
865 void WriteSpeaker(uint16_t, uint8_t)
871 uint8_t SwitchLCR(uint16_t address)
873 lcState = address & 0x0B;
879 void SwitchLCW(uint16_t address, uint8_t)
881 lcState = address & 0x0B;
892 WriteLog("SwitchLC: Read RAM bank 2, no write\n");
894 // [R ] Read RAM bank 2; no write
895 lcBankMemoryR = (altzp ? &ram2[0xD000] : &ram[0xD000]);
897 upperMemoryR = (altzp ? &ram2[0xE000] : &ram[0xE000]);
902 WriteLog("SwitchLC: Read ROM, write bank 2\n");
904 // [RR] Read ROM; write RAM bank 2
905 lcBankMemoryR = &rom[0xD000];
906 lcBankMemoryW = (altzp ? &ram2[0xD000] : &ram[0xD000]);
907 upperMemoryR = &rom[0xE000];
908 upperMemoryW = (altzp ? &ram2[0xE000] : &ram[0xE000]);
912 WriteLog("SwitchLC: Read ROM, no write\n");
914 // [R ] Read ROM; no write
915 lcBankMemoryR = &rom[0xD000];
917 upperMemoryR = &rom[0xE000];
922 WriteLog("SwitchLC: Read/write bank 2\n");
924 // [RR] Read RAM bank 2; write RAM bank 2
925 lcBankMemoryR = (altzp ? &ram2[0xD000] : &ram[0xD000]);
926 lcBankMemoryW = (altzp ? &ram2[0xD000] : &ram[0xD000]);
927 upperMemoryR = (altzp ? &ram2[0xE000] : &ram[0xE000]);
928 upperMemoryW = (altzp ? &ram2[0xE000] : &ram[0xE000]);
931 // [R ] Read RAM bank 1; no write
932 lcBankMemoryR = (altzp ? &ram2[0xC000] : &ram[0xC000]);
934 upperMemoryR = (altzp ? &ram2[0xE000] : &ram[0xE000]);
938 // [RR] Read ROM; write RAM bank 1
939 lcBankMemoryR = &rom[0xD000];
940 lcBankMemoryW = (altzp ? &ram2[0xC000] : &ram[0xC000]);
941 upperMemoryR = &rom[0xE000];
942 upperMemoryW = (altzp ? &ram2[0xE000] : &ram[0xE000]);
945 // [R ] Read ROM; no write
946 lcBankMemoryR = &rom[0xD000];
948 upperMemoryR = &rom[0xE000];
952 // [RR] Read RAM bank 1; write RAM bank 1
953 lcBankMemoryR = (altzp ? &ram2[0xC000] : &ram[0xC000]);
954 lcBankMemoryW = (altzp ? &ram2[0xC000] : &ram[0xC000]);
955 upperMemoryR = (altzp ? &ram2[0xE000] : &ram[0xE000]);
956 upperMemoryW = (altzp ? &ram2[0xE000] : &ram[0xE000]);
962 uint8_t SwitchTEXTR(uint16_t address)
964 WriteLog("Setting TEXT to %s...\n", (address & 0x01 ? "ON" : "off"));
965 textMode = (bool)(address & 0x01);
970 void SwitchTEXTW(uint16_t address, uint8_t)
972 WriteLog("Setting TEXT to %s...\n", (address & 0x01 ? "ON" : "off"));
973 textMode = (bool)(address & 0x01);
977 uint8_t SwitchMIXEDR(uint16_t address)
979 WriteLog("Setting MIXED to %s...\n", (address & 0x01 ? "ON" : "off"));
980 mixedMode = (bool)(address & 0x01);
985 void SwitchMIXEDW(uint16_t address, uint8_t)
987 WriteLog("Setting MIXED to %s...\n", (address & 0x01 ? "ON" : "off"));
988 mixedMode = (bool)(address & 0x01);
992 uint8_t SwitchPAGE2R(uint16_t address)
994 WriteLog("Setting PAGE2 to %s...\n", (address & 0x01 ? "ON" : "off"));
995 displayPage2 = (bool)(address & 0x01);
999 mainMemoryTextR = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
1000 mainMemoryTextW = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
1007 void SwitchPAGE2W(uint16_t address, uint8_t)
1009 WriteLog("Setting PAGE2 to %s...\n", (address & 0x01 ? "ON" : "off"));
1010 displayPage2 = (bool)(address & 0x01);
1014 mainMemoryTextR = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
1015 mainMemoryTextW = (displayPage2 ? &ram2[0x0400] : &ram[0x0400]);
1020 uint8_t SwitchHIRESR(uint16_t address)
1022 WriteLog("Setting HIRES to %s...\n", (address & 0x01 ? "ON" : "off"));
1023 hiRes = (bool)(address & 0x01);
1028 void SwitchHIRESW(uint16_t address, uint8_t)
1030 WriteLog("Setting HIRES to %s...\n", (address & 0x01 ? "ON" : "off"));
1031 hiRes = (bool)(address & 0x01);
1035 uint8_t SwitchDHIRESR(uint16_t address)
1037 WriteLog("Setting DHIRES to %s (ioudis = %s)...\n", ((address & 0x01) ^ 0x01 ? "ON" : "off"), (ioudis ? "ON" : "off"));
1038 // Hmm, this breaks convention too, like SLOTCXROM
1040 dhires = !((bool)(address & 0x01));
1046 void SwitchDHIRESW(uint16_t address, uint8_t)
1048 WriteLog("Setting DHIRES to %s (ioudis = %s)...\n", ((address & 0x01) ^ 0x01 ? "ON" : "off"), (ioudis ? "ON" : "off"));
1050 dhires = !((bool)(address & 0x01));
1054 void SwitchIOUDIS(uint16_t address, uint8_t)
1056 ioudis = !((bool)(address & 0x01));
1060 uint8_t ReadButton0(uint16_t)
1062 return (uint8_t)openAppleDown << 7;
1066 uint8_t ReadButton1(uint16_t)
1068 return (uint8_t)closedAppleDown << 7;
1072 // The way the paddles work is that a strobe is written (or read) to $C070,
1073 // then software counts down the time that it takes for the paddle outputs
1074 // to have bit 7 return to 0. If there are no paddles connected, bit 7
1076 // NB: This is really paddles 0-3, not just 0 :-P
1077 uint8_t ReadPaddle0(uint16_t)
1083 uint8_t ReadIOUDIS(uint16_t)
1085 return (uint8_t)ioudis << 7;
1089 uint8_t ReadDHIRES(uint16_t)
1091 return (uint8_t)dhires << 7;
1095 // Whenever a read is done to a MMIO location that is unconnected to anything,
1096 // it actually sees the RAM access done by the video generation hardware. Some
1097 // programs exploit this, so we emulate it here.
1099 // N.B.: frameCycles will be off by the true amount because this only
1100 // increments by the amount of a speaker cycle, not the cycle count when
1101 // the access happens... !!! FIX !!!
1102 uint8_t ReadFloatingBus(uint16_t)
1104 // Get the currently elapsed cycle count for this frame
1105 uint32_t frameCycles = mainCPU.clock - frameCycleStart;
1107 // Make counters out of the cycle count. There are 65 cycles per line.
1108 uint32_t numLines = frameCycles / 65;
1109 uint32_t numHTicks = frameCycles - (numLines * 65);
1111 // Convert these to H/V counters
1112 uint32_t hcount = numHTicks - 1;
1114 // HC sees zero twice:
1115 if (hcount == 0xFFFFFFFF)
1118 uint32_t vcount = numLines + 0xFA;
1120 // Now do the address calculations
1121 uint32_t sum = 0xD + ((hcount & 0x38) >> 3)
1122 + (((vcount & 0xC0) >> 6) | ((vcount & 0xC0) >> 4));
1123 uint32_t address = ((vcount & 0x38) << 4) | ((sum & 0x0F) << 3) | (hcount & 0x07);
1125 // Add in particulars for the gfx mode we're in...
1126 if (textMode || (!textMode && !hiRes))
1127 address |= (!(!store80Mode && displayPage2) ? 0x400 : 0)
1128 | (!store80Mode && displayPage2 ? 0x800 : 0);
1130 address |= (!(!store80Mode && displayPage2) ? 0x2000: 0)
1131 | (!store80Mode && displayPage2 ? 0x4000 : 0)
1132 | ((vcount & 0x07) << 10);
1134 // The address so read is *always* in main RAM, not alt RAM
1135 return ram[address];