Shamusworld >> Repos - virtualjaguar/blob - Makefile

   1 #
   2 # Unified Makefile for Virtual Jaguar GCC/SDL Portable Jaguar Emulator
   3 #
   4 # by James L. Hammons
   5 #
   6 # This software is licensed under the GPL v2 or any later version. See the
   7 # file GPL.TXT for details. ;-)
   8 #
   9
  10 # NOTE: zlib and OpenGL libs are a dependency, but are not checked for.
  11 #       same goes for libcdio
  12
  13 # Figure out which system we're compiling for, and set the appropriate variables
  14
  15 ifeq "$(OSTYPE)" "msys"                                                 # Win32
  16
  17 SYSTYPE    = __GCCWIN32__
  18 EXESUFFIX  = .exe
  19 GLLIB      = -lopengl32
  20 ICON       = obj/icon.o
  21 SDLLIBTYPE = --libs
  22 MSG        = Win32 on MinGW
  23
  24 else
  25 #ifeq "$(OSTYPE)" "darwin"
  26 ifeq "darwin" "$(findstring darwin,$(OSTYPE))"  # Should catch both 'darwin' and 'darwin7.0'
  27
  28 SYSTYPE    = __GCCUNIX__ -D_OSX_
  29 EXESUFFIX  =
  30 GLLIB      =
  31 ICON       =
  32 SDLLIBTYPE = --static-libs
  33 MSG        = Mac OS X
  34
  35 else                                                                                    # *nix
  36
  37 SYSTYPE    = __GCCUNIX__
  38 EXESUFFIX  =
  39 GLLIB      = -lGL -lGLU
  40 ICON       =
  41 SDLLIBTYPE = --libs
  42 MSG        = generic Unix/Linux
  43
  44 endif
  45 endif
  46
  47 CC         = gcc
  48 LD         = gcc
  49 TARGET     = vj
  50
  51 # Note that we use optimization level 2 instead of 3--3 doesn't seem to gain much over 2
  52 CFLAGS   = -MMD -Wall -Wno-switch -O2 -D$(SYSTYPE) -ffast-math -fomit-frame-pointer `sdl-config --cflags`
  53 CPPFLAGS = -MMD -Wall -Wno-switch -Wno-non-virtual-dtor -O2 -D$(SYSTYPE) -Wno-trigraphs \
  54                 -DHAVE_LIB_CDIO -ffast-math -fomit-frame-pointer `sdl-config --cflags` -g
  55 #               -fomit-frame-pointer `sdl-config --cflags` -g
  56 #               -fomit-frame-pointer `sdl-config --cflags` -DLOG_UNMAPPED_MEMORY_ACCESSES
  57
  58 LDFLAGS =
  59
  60 LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB) -lcdio `pkg-config --libs QtGui QtOpenGL`
  61 # Comment out the above and uncomment below if you don't have libcdio.
  62 # Also, remove the "-DHAVE_LIB_CDIO" from CPPFLAGS above.
  63 #LIBS = -L/usr/local/lib -L/usr/lib `sdl-config $(SDLLIBTYPE)` -lstdc++ -lz $(GLLIB)
  64
  65 INCS = -I. -I./src -I./src/gui -I/usr/local/include -I/usr/include
  66
  67 OBJS = \
  68         obj/m68kcpu.o       \
  69         obj/m68kops.o       \
  70         obj/m68kopac.o      \
  71         obj/m68kopdm.o      \
  72         obj/m68kopnz.o      \
  73         obj/m68kdasm.o      \
  74 \
  75         obj/about.o         \
  76         obj/app.o           \
  77         obj/filepicker.o    \
  78         obj/mainwin.o       \
  79         obj/moc_mainwin.o   \
  80         obj/glwidget.o      \
  81         obj/moc_glwidget.o  \
  82         obj/qrc_vj.o        \
  83 \
  84         obj/blitter.o       \
  85         obj/cdrom.o         \
  86         obj/cdintf.o        \
  87         obj/crc32.o         \
  88         obj/dac.o           \
  89         obj/dsp.o           \
  90         obj/eeprom.o        \
  91         obj/event.o         \
  92         obj/file.o          \
  93         obj/gpu.o           \
  94         obj/jagdasm.o       \
  95         obj/jaguar.o        \
  96         obj/jerry.o         \
  97         obj/joystick.o      \
  98         obj/log.o           \
  99         obj/memory.o        \
 100         obj/mmu.o           \
 101         obj/objectp.o       \
 102         obj/sdlemu_config.o \
 103         obj/sdlemu_opengl.o \
 104         obj/settings.o      \
 105         obj/state.o         \
 106         obj/tom.o           \
 107         obj/unzip.o         \
 108         obj/video.o         \
 109         obj/vj.o            \
 110         obj/wavetable.o     \
 111         $(ICON)
 112
 113 all: checkenv message obj $(TARGET)$(EXESUFFIX)
 114         @echo
 115         @echo -e "\033[01;33m***\033[00;32m Looks like it compiled OK... Give it a whirl!\033[00m"
 116
 117 # Check the compilation environment, barf if not appropriate
 118
 119 checkenv:
 120         @echo
 121         @echo -en "\033[01;33m***\033[00;32m Checking compilation environment... \033[00m"
 122 ifeq "" "$(shell which sdl-config)"
 123         @echo
 124         @echo
 125         @echo -e "\033[01;33mIt seems that you don't have the SDL development libraries installed. If you"
 126         @echo -e "have installed them, make sure that the sdl-config file is somewhere in your"
 127         @echo -e "path and is executable.\033[00m"
 128         @echo
 129 #Is there a better way to break out of the makefile?
 130         @breaky
 131 else
 132         @echo -e "\033[01;37mOK\033[00m"
 133 endif
 134 # !!! NOTE !!! Need to put a check here for libcdio, GL, zlib, Qt
 135
 136 message:
 137         @echo
 138         @echo -e "\033[01;33m***\033[00;32m Building Virtual Jaguar for $(MSG)...\033[00m"
 139         @echo
 140
 141 clean:
 142         @echo
 143         @echo -en "\033[01;33m***\033[00;32m Cleaning out the garbage...\033[00m"
 144         @rm -rf obj
 145         @rm -f ./$(TARGET)$(EXESUFFIX)
 146         @echo -e "\033[01;37mdone!\033[00m"
 147
 148 obj:
 149         @mkdir obj
 150
 151 # This is only done for Win32 at the moment...
 152
 153 ifneq "" "$(ICON)"
 154 $(ICON): res/$(TARGET).rc res/$(TARGET).ico
 155         @echo -e "\033[01;33m***\033[00;32m Processing icon...\033[00m"
 156         @windres -i res/$(TARGET).rc -o $(ICON) --include-dir=./res
 157 endif
 158
 159 # Main source compilation...
 160
 161 obj/%.o: src/%.c
 162         @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 163         @$(CC) $(CFLAGS) $(INCS) -c $< -o $@
 164
 165 obj/%.o: src/%.cpp
 166         @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 167         @$(CC) $(CPPFLAGS) $(INCS) -c $< -o $@
 168
 169 #$(TARGET)$(EXESUFFIX): $(OBJS)
 170 $(TARGET)$(EXESUFFIX): $(OBJS)
 171         @echo -e "\033[01;33m***\033[00;32m Linking it all together...\033[00m"
 172         @$(LD) $(LDFLAGS) -o $@ $(OBJS) $(LIBS)
 173 #       strip --strip-all vj$(EXESUFFIX)
 174 #       upx -9 vj$(EXESUFFIX)
 175
 176 # Qt GUI stuff...
 177
 178 src/gui/Makefile: src/gui/vj-gui.pro src/gui/vj-gui.qrc
 179         @echo -e "\033[01;33m***\033[00;32m Creating Qt Makefile...\033[00m"
 180         @qmake -o src/gui/Makefile src/gui/vj-gui.pro
 181
 182 #obj/%.o: src/gui/%.cpp src/gui/Makefile
 183 #       @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 184 #       @make -C src/gui
 185 #OR:
 186 #       @cd src/gui && make
 187
 188 #QT_SOURCES       = app.cpp \
 189 #               mainwin.cpp ../../obj/moc_mainwin.cpp \
 190 #               ../../obj/qrc_vj-gui.cpp
 191 #QT_OBJECTS       = ../../obj/app.o \
 192 #               ../../obj/mainwin.o \
 193 #               ../../obj/moc_mainwin.o \
 194 #               ../../obj/qrc_vj-gui.o
 195 QT_CFLAGS = `pkg-config --cflags QtGui`
 196 # !!! THESE DEFINES ARE PLATFORM DEPENDENT !!!
 197 #QT_DEFINES = -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED
 198 QT_DEFINES = -DQT_NO_DEBUG -DQT_OPENGL_LIB -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED
 199 #QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src/gui -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4 -I./obj
 200 QT_INCPATH = -I/usr/share/qt4/mkspecs/linux-g++ -I./src -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4 -I/usr/X11R6/include -I./obj
 201 QT_CXXFLAGS = -pipe -O2 -march=pentium-m -pipe -D_REENTRANT -Wall -W $(QT_DEFINES) -D$(SYSTYPE)
 202
 203 obj/moc_%.cpp: src/gui/%.h
 204         @echo -e "\033[01;33m***\033[00;32m Creating $@...\033[00m"
 205         @/usr/bin/moc $(QT_DEFINES) $(QT_INCPATH) $< -o $@
 206
 207 obj/moc_%.o: obj/moc_%.cpp
 208         @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 209         @$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
 210
 211 obj/qrc_vj.cpp: src/gui/vj.qrc res/vj.xpm
 212         @echo -e "\033[01;33m***\033[00;32m Creating qrc_vj.cpp...\033[00m"
 213         @/usr/bin/rcc -name vj src/gui/vj.qrc -o obj/qrc_vj.cpp
 214
 215 obj/qrc_%.o: obj/qrc_%.cpp
 216         @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 217         @$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
 218
 219 obj/%.o: src/gui/%.cpp src/gui/%.h
 220         @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 221         @$(CC) -c $(QT_CXXFLAGS) $(QT_INCPATH) -o $@ $<
 222
 223 #
 224 # Musashi specific stuffola
 225 #
 226
 227 obj/m68kmake$(EXESUFFIX): src/m68kmake.c src/m68k_in.c
 228         @echo -e "\033[01;33m***\033[00;32m Preparing to make the Musashi core...\033[00m"
 229         @$(CC) $(WARNINGS) src/m68kmake.c -o obj/m68kmake$(EXESUFFIX)
 230
 231 obj/m68kops.h obj/m68kops.c obj/m68kopac.c obj/m68kopdm.c obj/m68kopnz.c: obj/m68kmake$(EXESUFFIX)
 232         @echo -e "\033[01;33m***\033[00;32m Creating m68kops.h...\033[00m"
 233         @obj/m68kmake obj src/m68k_in.c
 234
 235 obj/m68kcpu.o: obj/m68kops.h src/m68k.h src/m68kconf.h
 236         @echo -e "\033[01;33m***\033[00;32m Compiling m68kcpu.c...\033[00m"
 237         @$(CC) $(CFLAGS) -Iobj -c src/m68kcpu.c -o obj/m68kcpu.o
 238
 239 obj/m68kop%.o: obj/m68kop%.c
 240         @echo -e "\033[01;33m***\033[00;32m Compiling $<...\033[00m"
 241         @$(CC) $(CFLAGS) -Isrc -c $< -o $@
 242
 243 # Pull in dependencies autogenerated by gcc's -MMD switch
 244 # The "-" in front is there just in case they haven't been created yet
 245
 246 -include obj/*.d